Deployment hangs the control center

Hi,
We are using OWB 10.2.0.1, central installation.... We have installed OWB in our local machines (laptops), thru which we acess the Central OWB repository...
When I try to deploy any map from control center, it is getting hanged... But If I do the same from another machine (with the same username & password),the control center is deploying the map successfully...
I re-installed OWB in my laptop, but no luck, still facing the same issue....
Can anybody, pls tell me how to avoid this issue.

I just asked the same question. It's not supported on iPhone 4. I'm annoyed by that cause that was one thing I was super excited about. I was sent this article too about what we lowlife 4 users miss out on.
http://arstechnica.com/apple/2013/09/new-lease-on-life-or-death-sentence-ios-7-o n-the-iphone-4/

Similar Messages

ORA-20029: The control center service is not currently available

We have taken full database dump of OWB design repository ,imported to new instance and compiled all objects.
When we tried to execute the map ,getting below errors ,pls advice.
We are trying to execute Maps from sqlplus with no OWB tool at QA server.Dev server has OWB tool with design repo and runtime repo ,designed maps and took full database dump(exp /imp) and imported to QA database and trying to execute using sqlplus and not installed OWB control center at QA.
I believe we do not need control center as we have copied full database and trying to execute using sqlplus.
SQL> declare
2 out1 number;
3 begin
4 out1 := wb_rt_api_exec.run_task( P_LOCATION_NAME => 'ETL'
5 , P_TASK_TYPE => 'PLSQLMAP'
6 , P_TASK_NAME => 'M_COUNTRY'
7 );
8 dbms_output.put_line('Result = '||out1);
9 end;
10 /
declare
ERROR at line 1:
ORA-20029: The control center service is not currently available
ORA-06512: at "OWB_REPO.WB_RTI_EXCEPTIONS", line 107
ORA-06512: at "OWB_REPO.WB_RTI_QUEUES", line 197
ORA-25207: enqueue failed, queue OWB_REPO.WB_RT_SERVICE_QUEUE is disabled from
enqueueing
ORA-06512: at "OWB_REPO.WB_RTI_SERVICE_EXECUTION", line 500
ORA-06512: at "OWB_REPO.WB_RTI_SERVICE_EXECUTION", line 558
ORA-06512: at "OWB_REPO.WB_RT_EXECUTION_CONTROL", line 13
ORA-06512: at "OWB_REPO.WB_RT_API_EXEC", line 365
ORA-06512: at "OWB_REPO.WB_RT_API_EXEC", line 726
ORA-06512: at line 4
Thanks,
Jo

Hi Jo,
Control center service association is mandatory for Deployment and Execution. Without Control Center service you will not be able to deploy/execute any mappings/PF's
Regards,

Loading flat files located on a server using the Control Center piece ofOWB

Loading flat files from a server with OWB
I am successful loading files with OWB, as long as they resided on my workstation in the C:\ drive. I copied the files to a Linux server into directories owned by Oracle/oinstall, permissions on the directories containing the files are 777. I ran the OWB client from the server with the following results:
Error
RPE-01013: SQL Loader reported error condition, number 1.
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
I tried to load the file using the control center from both the windows client and the server client. Can I do this from either one?
I can't import the file in the Design Center from the /u00/data/owb_repos1 directory, it does not show up.
If anyone has received similiar errors from OWB, please tell me how I can fix this. THANKS!!!
[d97886@owbtest owb_repos1]$ pwd
/u00/data/owb_repos1
[d97886@owbtest owb_repos1]$ ls -la
total 24
drwxrwxrwx 2 oracle oinstall 4096 Mar 19 12:14 .
drwxrwxrwx 18 oracle oinstall 4096 Mar 6 16:41 ..
-rwxrwxrwx 1 oracle garrett 1481 Mar 8 07:32 state_codes.csv
[d97886@owbtest owb_repos1]$

Hi
This is what i do for my flat files (i am loading my tables from the flat files):
1) Create location for the files in OWB and it should look something like \\path_to_where_the_files_are. Here you should be able to browse to your Linux box and select the location of the files.
2) Then check whatever you use (i use TOAD) and you should see in owb schema a directory created there which points to the location of the flat file.
3) then just follow the guide to sample the files etc and you are good to go.
Basically OWB has to be able to see the files that are on Linux machine.
Alternatively you can map your Linux share to your windows box (use samba or something) and use it that way.
Sorry if it is stating the obvious.
Hope this helps
Kind Regards
Vix

After downloading iOS 7 on iPhone 5 the control center won't open.

When I swipe up from the bottom, nothing happens. Both of the control center options are enabled in the settings. Help!

Do you have a bulky case with an edge near the bottom of the screen?
Lots of people describe this problem with Otterbox Defender and other thick cases.
https://discussions.apple.com/message/23015788

HT4623 Why can't I access the Control Center in iOS 7?

Swiping up does not bring up the Control Center. Also, the phone is locked in the vertical position. How can I get back the functionality of having it change orientations?
c

Do you have a case on your phone? You have to swipe up from the very bottom edge of screen, and some cases are a tad too large to enable you to do that. Try taking off the case to see if you can swipe up.
Once you get there, you may see that the Orientation lock is highlighted, which means it is locked. Tap it to allow you to swith between portrait and landscape.
Cheers,
GB

HT5858 My iphone 4 has iOS 7, and the flashlight feature use to be in the control center however just recently I've noticed that it has disappeared, how do i get it back?

My iphone 4 used to have the flashlight feature in the control center. It obviously has iOS 7 in fact iOS 7.0.4 and now there is no flashlight icon in the control center, how do I get it back?

Thanks a lot!!! I honestly feel like that was the simplest thing ever and that I should've thought of atleast turning my phone off then back on again but again, thanks!!

I can't change music from the control center.

I just got the iOS 7 update for my iPhone 4S and think its great. The only problem is that when I go to change/stop/play a song in the control center, it wont let me. Although, I can still adjust the volume?!? I am so confused.

Hello Gonzoboy11,
Thank you for using Apple Support Communities!
First I would recommend that you restart your iPhone:
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
From: iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, then I would backup and restore the iPhone.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
All the best,
Sterling

HT5858 In the control center I can change the mute or the rotation but not both. How do I fix this. In settings I can not uncheck both the mute and rotation lock.

In the control center I can change the mute or the rotation but not both. In the settings area therefore I can't uncheck the mute and rotation settings at the same time.

Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
 Cheers, Tom

HT204291 I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for

I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for Netflix streaming and don't know what to do. Any luck out there?

If you last used an Apple TV to mirror your device and have updated to the newest Apple TV software, go into settings and turn airplay back on. The icon should then appear on your iPad mini when you swipe up allowing you to disable it for Netflix. After updating my Apple TV software for some reason it turned airplay off.
Bob G

When I swipe up to get the control center on my iPad I can't find the airdrop option

When I swipe up to get the control center on my iPad I can't find the airdrop option - I see airplay, but no airdrop

Pay attention to the models of the ipads. For example, my ipad 2 can't and won't ever have airdrop. So if you have an older one that could be why you can't see it.

I cant get the control center to swipe on my iphone 5 with ios 7

anyone else haveing the same issue. the notification center works when you swipe down as well as the search iphone feature.

Yeah, I got fat fingers and have jammed into the most bottom part that the screen will let me touch with the case on and stilll can not get it to work.
Again works fine with the case off and I start the swipe up off the illuminated part of the screen and it works every time. Just does not work with the case on to get the Control Center swipe to work.
Not a great big deal but it is a feature that would be nice to have with my favorite Otterbox Defender Case.

Can you and if so how can you choose what's in the control center?

Switch airplane mode with something else

There are no settings for the Control Center. What you see is what you get.

Anyone having trouble with operating music controls through the control center?

Sometimes I pause my music to do something else. When I swipe up later to access the control center, I hit the play button, but it won't play. I could hit the button on my headphones to play but still no result. I have to actually open the music app and press play. Is anyone else having this problem?

IslandPrince89 wrote:
That actually helped but it seems that there are a lot of bugs in the iOS 7.0.2 ..
You can use this Link to send your Feedback to Apple
http://www.apple.com/feedback/

How to block the video url on the control center on iPhone and iPad

My company has videos on demand and live video streaming that are available for both iPhone and iPad. Recently we just found out that viewers can see the videos' streaming URLs displaying on the "Control Center". We would like to hid the URL so that the video URLs won't be displayed on the "Control Center" panel. How can I do that?

You cannot change it. If you're delivering video on web, your viewers can see any url, even if you embed it like Google. Even if they have the URL, you should have some sort of authentication. Are you saying you have no Authentication on these urls that determines if a viewer can see the video or not?

HT5957 Why dont you add CELLULAR button in the control center? Isn't it easy to acces?

I think it is a good idea to add cellular option also in the control center, which would make it easy to switch on or off the internet fast..!!!

Am I missing something here?
WIth the compose window open, choose Edit>Customize Tool Bar and drag the Address button to your tool bar.
You can also just start typing a reciepeints name in the To field and Mail will suggest addresses.
Matt

Deployment hangs the control center

Similar Messages

Maybe you are looking for