Deployment: initiate same subdirectory's name for application in one cluste

Hi all,
In one (third-party) application is used one constant for Web-path that is referenced such as WEB-INF or META-INF directories. But after deployment of application to 2 nodes in cluster, WebLogic create subdirectories under $Domains/dmainname/$ManagedSRV/tmp/… with different names.
How is it possible, for both ManagedSRV (node 1 and node2 in cluster), initiate same subdirectory’s name (constant name)? or How can I reference consistent the web directory from application?
Regards,
Moh

You can use deployment plans. An example, is shown here: http://middlewaremagic.com/weblogic/?p=6168

Similar Messages

Same logical system name for two productive systems - BW, PI issues

Dear all,
we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
However as far as I know:
- we cannot connect systems with same logical system name to BW,PI
- we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
How can we overcome the problem?
Please advice.

> However as far as I know:
> - we cannot connect systems with same logical system name to BW,PI
> - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
Right.
> How can we overcome the problem?
Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
Markus

How to keep same sender file name for receiver mail attachement

Hi,
i am working with File to Mail scanario. There i want to pick a flat file from native file system and then send it as email attachment. Now i am able to send the file but the flat is getting converted as an xml file. is there any method to keep the same sender file name and type for receiver mail attachment. i am not using any mail package. i am using XI payload and keep attachments.
Thanks in advance.
-Siva

Hi,
Yes,With out using the mail package u can send the Mail Attachments to the receiver side,
In that case no need of Integration Repository objects.
Chck this links.
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/community.user/blog/2006/09/07/email-reporting
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
If u dont get ur requirement then let me know ur Mail id i will send u a Doc.
Regards,
Phani
Reward points if Helpful

Necessary to have the same wireless network name for using WDS?

I have set up two Airports in WDS mode. I did this so my ps3 could get on the internet via ethernet (its an older model, and doesn't have wireless, so you have to use an ethernet bridge). I set up the WDS fine, and my Airport extreme base station (the square one) is the WDS main, while as my old Airport extreme (snow) is the remote, which I use to run a cable from to my ps3 to access the internet. This works fine when I have the network names for each base station the same.
I was under the impression that you could have two different named wireless networks for two base stations (i.e .they have different names), as long as you have the MAC addresses set up correctly for the WDS settings (i.e. main and remote). However, when I do that, I can no longer access the ethernet from the remote base station on my PS3. I can only access the ethernet via my PS3 if I have the wireless network for each base station literally named the same. Seems kind of strange if you have the MAC addresses set up correctly for the main and remote, as shouldn't they be talking to each other via that mode, and not the actual wireless network name?
I would like to have each base station with its own wirelss network name, so I can differentiate between them. I get some strange issues when my airport card scans, it frequently switches between base stations, and this slows down certain programs (i.e. VPN connections for mail etc).
I set this up pretty literally from the airport guide from the apple site.

I was under the impression that you could have two different named wireless networks for two base stations (i.e .they have different names), as long as you have the MAC addresses set up correctly for the WDS settings (i.e. main and remote).
No that is not correct. Since the 2 are working together to create a single wireless network, they must use the same network name.

Default logical system names for application and metadata in models.

hi,
I have a dbt in web dynpro java. When we create a model, we give the logical system names. When our developement is over, do we have to change these names because in test system and subsequently production system, the backends will be oviously different than developement ?
how do we change them and re import after changing? in abap we cant change our code in test and prod systems right so how is it in web dynpro java ?
thanks

Hi Jeschael,
thanks for the reponse.
When I create the model, I give the default logical system names and on the next screen I give the
ip address of the backend system, client , login, password etc
Even though the logical system names wud be same in Dev, Test and Prod systems, the ip address, login password is different so how do I give it ?
thanks
B

Configure Service Principle Name for Application Pool account and web application?

Hello Community
    On WS2012 Server running Sharepoint 2013 Server when you
configure SPN you configure it for the SQL server object "MSSQLSvc" (domain account)
and the user object "HTTP" (domain account).
    The question is if you also should configure SPN for the Application Pool account and
configure SPN for the web application, how do you configure SPN for the Application Pool
account and the web application?
    Thank you
    Shabeaut

The Web Application is only an IIS Site. You're configuring the SPN for the Domain User running the IIS Application Pool (that the Web Application (IIS Site) leverages).
So you would just need to use the format of:
setspn -A HTTP/webAppUrl domain\iisapppoolacctusername
setspn -A HTTP/webAppUrl.fqdn.com domain\iisapppoolacctusername
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Same users could open SBO application in one license

Dear Expert/Guru,
I have a problem relates to run SBO application in the different PC but using same user. For example : user A run SBO client application in PC-1 then he want to run SBO client application in PC-2 by using the same user code that he used to login to SBO in PC-1. This can be done in SBO 2004A SP 00 PL 41 but I don't understand why in SBO 2005A SP 01 PL 18 can't do this. Is it possible to do this in the SBO 2005A ?
I appreciate your answer. TIA
Rgds,

Hi Steve,
It doesn't matter where the SBO GUI is running (ie same computer or different computers). The restriction is enforced by the license server and not the workstation. You can only log in to the same company twice concurrently with a single user. But the same user could open as many different companies as he wants concurrently.
Please note that this is an 'undocumented feature' of SBO and it could be something that SAP change in future versions (although it has been around for a few versions now). There has been talk about changing from named users to concurrent users for a while though 2007A still uses the existing mechanism.
Kind Regards,
Owen

My iPod was stolen and I am going to get another one, if I used the same email I used for the first one, will the updates I get on my new one still go to my old one? Like messages and email and stuff?

I don't want the person to be able to hack into the iPod past the lock sreen and be able to read my new messages. Is there anyway to stop this?

Im pretty sure that if they want to update the stolen ipod that they need the apple id password, but with the mail it just updates new mail by its self. Hope that helps

Network drive volume name for same folder by multiple users

I am using a 1TB USB hard disk attached to a ASUS RT-AC68U wireless router as network drive. There are multiple user accounts created on the same MacBook Air and they need to access the same folders on the network drive. For example, we have folder called "iTunes" created on the network drive.
The following steps resulted in some problems encountered.
Step 1: When user1 mounts the iTunes folder as a network drive, the general info shows:
General:
Kind: Volume
Server: smb://rt-ac68u/iTunes
Name & Extensions:
iTunes
Step 2: When user2 mounts the same iTunes folder as a network drive, the general info shows:
General:
Kind: Volume
Server: smb://rt-ac68u/iTunes
Name & Extensions:
iTunes-1
Question: Why does OS X assign "iTunes-1" as the name of the same network folder on the network drive for user2? Is there a way to retain the same original folder name for user1 and user2, such as "iTunes", so that it can be access as "/Volumes/iTunes" by both these users?

tastyrico wrote:
Hi Drew,
Thanks for the recommendations. They are useful tips to have in the arsenal, thanks. However, the preferences discussed are intended for directly attached external hard disks and the specific discussion was to make it available to the network on a Mac that is powered up with no user logged in (like a OS X Server but user still need to log in).
That's correct, I'm sorry I am wrong.
I do remember another defaults write option for detaching network drives on 'switch to loginwindow' because I needed the same thing - eventually I gave up & disabled fast user switching, it reduced the amount of issues for the clients. Sorry for confusing the two.
Have you considered mounting it via a startup script. At the moment it is failing because the path exists when User2 mounts it. If you try a script (at the level of the system) it should mount only once. Obviously sticking usernames & passwords into a script is not the best for security.
I think this issue is what NFS mounts can overcome, but I haven't used them for so long. They should be able to mount with no user interaction, but they are less flexible with permissions IIRC.
If your NAS supports NFS look at that, I think you both need to remove the user as the agent that mounts the disk. If the OS does it once (& permissions are correct) it should remove the 'diskname-1' issue.
When it works you end up with volumes in /Network/diskname.
I don't have a good place to start with NFS, so take a look around here…
https://discussions.apple.com/thread/4144999
@ElisabethBraut, do you get this error form MS…
http://support.microsoft.com/kb/2712085
MS apps fall apart when you have disks mounted like this, it's a consequence of MS apps using an older way to represent filepaths.

What is name for default server

Hi
we use to invoke a server before invoking the deployment tool whats the name of the defualt server's named...can any one find me the answer

Thank you for your reply,
I am finding a .dat file in the devsuitehome\\reports\server. But name of that file is same like which I give in default.env file for APPLICATION_REPORT_SERVER parameter.
My doubt is whethere report server name is same as machine name and application server name?
And I want to check whether I have given correct report server name in default.env file too..
Plz help
Edited by: user13522443 on Feb 9, 2011 4:14 AM

Save password for several application in one workspace

Hi, I have several applications in one workspace with custom authentication. How do I set the option to save password (which is same for all apps) , so I would not write password every time when switching from application to application. Thank you

933913 wrote:
Hi, I have several applications in one workspace with custom authentication. How do I set the option to save password (which is same for all apps) , so I would not write password every time when switching from application to application. Thank youIf you are using the same authentication for all your applications, then you can redirect to those applications just same as you redirect to the current app by just changing the app_id
you can use a same session cookie name for all applications and make sure all apps use same authentication scheme
Edit you application A > Shared Components > Authentication Scheme > edit your authentication > Session Cookie Attributes section
set Cookie Name value to somestring
for example: commonauthcookie
Repeat the above step for all other applications and set the cookie name to the same as above

Same Logical System Name, different Business System

Hi all,
I have a problem regarding SLD and Integration Directory. The client is requiring me to use the same logical system name for two different business systems. It seems that this is not possible in XI. When I tried activating the business system in ID, I'm getting the error, 'Logical system XXX already exists in communication component YYY'. Please help. Thanks!
IX

Hi,
You cannot have same logical name for two business systems....
Why you need it?? How will the SAP system understand which which system the message was sent for?? Some workaround like
1. Create a business system with this logical system
2. Overwrite sender/receiver business system in the receiver agreement for messages sent to 2nd business system..
This may lead to discrepancies....
Regards
Suraj

JMX object names for JBI services

In a previous post it was stated that the JMX objectnames for the JBI installation service, deployment service, and admin service were implementation specific. Is it possible to lookup the installation service and deployment service from the admin service in a similar fashion to looking up the object name of a component by it's name?

The names are implementation dependent. The model is that administrative code is implementation-specific. You can use the AdminServiceMBean.getSystemService method to find things like the installation and deployment services:
The Open ESB names for the System services are:
DeploymentService
LoggingService
InstallationService
ConfigurationService
MessageService
AdministrationService
(These are best discovered using JConsole!)
Obviously there are more system services than Deployment and Installation; the Open ESB implementation supplies other MBeans to control other implementation modules that are not specified by JBI, but are needed to realize a controllable system.
-Ron

Application name for SDA Deployment(Custom Adapter)

hi Experts,
I am trying to deploy an SDA file using SDM. I had created an EAR project using NWDS and then converted this into an SDA file using CECLT.
Now while deploying this file using SDM, it is asking for application name and vendor name. Vendor name i had given while creating SDA file.
What is the meaning of application name while deploying SDA file?
Please help if possible! Thanks!
Mayank

Hi DDasgupta,
After you created a web application with a custom host name, if you got a prompt for the user and you may face the following issues:
There is continuous prompt for the credentials
HTTP 401.1 error
This shows that there is a problem with the Loopback configuration. This situation should occur only when we access the application from the server machine.
For fixing the problem, we have to disable the Loopback value inside the registry.Open the Registry Editor (regedit.exe) and locate the following key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa, and create a new Key Value of type DWORD inside
it and set the value to 1.
More information, please refer to the link:
http://www.c-sharpcorner.com/UploadFile/40e97e/sharepoint-2010-creating-host-name-for-web-application/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Unknown error occurred for application (application name) (id=5 [5], 5[5])

Environment: ZFD4
Windows OS: 2000 Professional Sp4
Novell Client: Tried both: 4.83SP2 and 4.91SP3
Zenworks Server: NW51 SP6
I successfully created a NAL object for an application called Delphi from
a company called NewMarket. The Application utilizes an SQL database and
runs off a Windows 2000 server. We already have one NAL object for this
application which works fine. The new object I created is for a newer
version of this appliction.
I have compared all the settings, and parameters of the new object with
the old one and all are in identical. I am not entirely sure of every
registry or INI entry though.
On trying to deploy the object, the files and registry entries of the
application seem to get copied to a point from what I can see but then it
always ends up with this error: " Unknown error occurred for application
DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
I did a search for this error off Novell's knowledge base but came up
empty.
Any thoughts about what could be the problem?
Will greatly appreciate any help with this.
Thanks very much
Kenneth

Originally Posted by Craig Wilson
Export the object as an "AXT" file and mail to
Craig_D_Wilson at yahoo dot com
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
"Kenneth " <[email protected]> wrote in message
news:_vl0i.484$[email protected]..
> Environment: ZFD4
> Windows OS: 2000 Professional Sp4
> Novell Client: Tried both: 4.83SP2 and 4.91SP3
>
> Zenworks Server: NW51 SP6
>
> I successfully created a NAL object for an application called Delphi from
> a company called NewMarket. The Application utilizes an SQL database and
> runs off a Windows 2000 server. We already have one NAL object for this
> application which works fine. The new object I created is for a newer
> version of this appliction.
>
> I have compared all the settings, and parameters of the new object with
> the old one and all are in identical. I am not entirely sure of every
> registry or INI entry though.
>
> On trying to deploy the object, the files and registry entries of the
> application seem to get copied to a point from what I can see but then it
> always ends up with this error: " Unknown error occurred for application
> DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
> I did a search for this error off Novell's knowledge base but came up
> empty.
>
> Any thoughts about what could be the problem?
>
> Will greatly appreciate any help with this.
>
> Thanks very much
> Kenneth
>
I had the same type of error and found that the version of snapshot was different then the version of zen on our network. When I matched the two versioin the snapshot worked perfect. Hope this helps.

Deployment: initiate same subdirectory's name for application in one cluste

Similar Messages

Maybe you are looking for