Deployment issue, immediate response encouraged

We are in deployment phase of a Sunopsis v3 enhancement project. While deploying the enhanced Sunopsis objects (new interfaces, upgraded Package, variables etc), we are getting the below errors:
‘An error occurred while getting a datastore / interface from a source datastore’
‘Unable to find a source data store alias ’
Below is the summary of the steps we have done for this project:
Initial setup of Development environment:
1.     Exported the Sunopsis Project (all sunopsis objects) from Production environment
2.     Imported those objects to Development environment
3.     Tested the functionality in Development environment and it works same as Production environment
Enhancements Phase
1.     In the same work repository, we duplicated the Sunopsis Project
2.     Modified the duplicated Sunopsis project by changing some of the existing Sunopsis package, adding new Sunopsis objects ( package, folder, interface, variables etc)
3.     Tested the functionality, and it is working fine.
Deployment phase
1.     Exported the modified Sunopsis objects (like Interface, folder, variable etc) only
2.     Tried importing in Test environment
3.     Some of the objects resulted in error while importing with the following error:
a.     SnpProject.getObjectByIdent: Project does not exist
4.     Other objects which are imported successfully resulted in the below error while opening those Sunopsis objects (interfaces, variables etc)
a.     ‘An error occurred while getting a datastore / interface from a source datastore’
b.     ‘Unable to find a source data store alias ’
Please help me out to resolve these issues. Thanks for your efforts.

Hi,
I was wondering whether you found a solution to this problem you were experiencing?
I too am having this issue and get "An error occurred while getting a datastore/interface from a source datastore" error message.
Any feedback much appreciated!
Cheers,
Matt
Full Error Message:
An error occurred while getting a datastore/interface from a source datastore
java.lang.NullPointerException      
at com.sunopsis.dwg.dbobj.SnpSourceTab.createJournalizationColumns(Unknown Source)      
at com.sunopsis.graphical.j.a.by.R(Unknown Source)      
at com.sunopsis.graphical.j.a.by.setTheSourceTable(Unknown Source)      
at com.sunopsis.graphical.j.a.by.<init>(Unknown Source)      
at com.sunopsis.graphical.j.a.by.<init>(Unknown Source)
at com.sunopsis.graphical.j.a.bv.a(Unknown Source)      
at com.sunopsis.graphical.j.a.g.a(Unknown Source)      
at com.sunopsis.graphical.frame.a.it.ee(Unknown Source)      
at com.sunopsis.graphical.frame.a.it.<init>(Unknown Source)      
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)      
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)      
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)      
at java.lang.reflect.Constructor.newInstance(Unknown Source)      
at com.sunopsis.graphical.frame.bb.b(Unknown Source)      
at com.sunopsis.graphical.tools.utils.swingworker.v.call(Unknown Source)      
at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)      
at com.sunopsis.graphical.tools.utils.swingworker.l.run(Unknown Source)      
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)      
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)      at java.lang.Thread.run(Unknown Source)

Similar Messages

  • Outbound BPEL Process deployment Issue in SOA (binding.jca-12600)

    Hi,
    I have Designed an Outbound BPEL Process for Siebel CRM Service Integration using Jdeveloper (11.1.1.3.0). After that I am facing the deployment issue of this application in SOA suite (11.1.1.6.0). Following is the deployment.log status in jdeveloper:-
    [10:57:54 AM] ---- Deployment started. ----
    [10:57:54 AM] Target platform is (Weblogic 10.3).
    [10:57:54 AM] Running dependency analysis...
    [10:57:54 AM] Building...
    [10:57:58 AM] Deploying profile...
    [10:57:58 AM] Wrote Archive Module to C:\JDeveloper\mywork\Siebel_Outbound_BPEL\QueryWithView_Invoke\deploy\sca_QueryWithView_Invoke_rev1.0.jar
    [10:57:58 AM] Deploying sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
    [10:57:58 AM] Processing sar=/C:/JDeveloper/mywork/Siebel_Outbound_BPEL/QueryWithView_Invoke/deploy/sca_QueryWithView_Invoke_rev1.0.jar
    [10:57:58 AM] Adding sar file - C:\JDeveloper\mywork\Siebel_Outbound_BPEL\QueryWithView_Invoke\deploy\sca_QueryWithView_Invoke_rev1.0.jar
    [10:57:58 AM] Preparing to send HTTP request for deployment
    [10:57:59 AM] Creating HTTP connection to host:10.10.22.81, port:7001
    [10:57:59 AM] Sending internal deployment descriptor
    [10:57:59 AM] Sending archive - sca_QueryWithView_Invoke_rev1.0.jar
    [10:58:00 AM] Received HTTP response from the server, response code=500
    [10:58:00 AM] Error deploying archive sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
    [10:58:00 AM] HTTP error code returned [500]
    [10:58:00 AM] Error message from server:
    #;There was an error deploying the composite on AdminServer: Deployment Failed: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
    #;Generic error.
    #;Cause: Unable to find suitable outbound binding.
    #;Please create a Service Request with Oracle Support.
    #;: Generic error.
    #;Generic error.
    #;Cause: Unable to find suitable outbound binding.
    #;Please create a Service Request with Oracle Support.
    [10:58:00 AM] Check server log for more details.
    [10:58:00 AM] Error deploying archive sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
    [10:58:00 AM] #### Deployment incomplete. ####
    [10:58:00 AM] Error deploying archive file:/C:/JDeveloper/mywork/Siebel_Outbound_BPEL/QueryWithView_Invoke/deploy/sca_QueryWithView_Invoke_rev1.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
    And the following is the SOA Server Side log file status:-
    ####<Jun 3, 2013 10:36:05 AM AST> <Info> <Health> <HOSADDAT02> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <4be72ac3bdb5ebae:-a61256d:13f08d94c98:-8000-00000000000000f4> <1370244965280> <BEA-310002> <36% of the total memory in the server is free>
    ####<Jun 3, 2013 10:36:12 AM AST> <Error> <ServletContext-/soa-infra> <HOSADDAT02> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <4be72ac3bdb5ebae:-a61256d:13f08d94c98:-8000-000000000000182b> <1370244972343> <BEA-000000> <Error during deployment
    oracle.fabric.common.FabricException: Deployment Failed: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
    Generic error.
    Cause: Unable to find suitable outbound binding.
    Please create a Service Request with Oracle Support.
    : Generic error.
    Generic error.
    Cause: Unable to find suitable outbound binding.
    Please create a Service Request with Oracle Support.
         at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:64)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
         at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
         at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: oracle.fabric.common.FabricDeploymentException: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
    Generic error.
    Cause: Unable to find suitable outbound binding.
    Please create a Service Request with Oracle Support.
    : Generic error.
    Generic error.
    Cause: Unable to find suitable outbound binding.
    Please create a Service Request with Oracle Support.
    {rootCauses=[]}
         at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:458)
         at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:82)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:201)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:150)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:63)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:77)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy314.load(Unknown Source)
         at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:59)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
         at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
         at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: BINDING.JCA-12600
    Generic error.
    Generic error.
    Cause: Unable to find suitable outbound binding.
    Please create a Service Request with Oracle Support.
         at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterBindingConfig.addAdapterReference(AdapterBindingConfig.java:206)
         at oracle.integration.platform.blocks.adapter.AdapterReference.setupAdapterReference(AdapterReference.java:506)
         at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:425)
         at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:82)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:201)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:150)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:63)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:77)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy314.load(Unknown Source)
         at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:59)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
         at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
         at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Kindly help me in this regard

    Solution:
    Workaround the issue immediately by removing the "ns1:" qualification on the operation for the binding.jca entry in the composite.xml and redeploying.
    For example:
    From:
    <binding.jca config="BAPI_COMPANYCODE_GETDETAIL_invoke_3P.jca"
    operation="ns1:BAPI_COMPANYCODE_GETDETAIL"/>
    To:
    <binding.jca config="BAPI_COMPANYCODE_GETDETAIL_invoke_3P.jca"
    operation="BAPI_COMPANYCODE_GETDETAIL"/>
    Regards,
    Shaheer Badar

  • Synchronous Composite Services with Immediate Response

    Hi
    The paltform is currently SOA 11.1.1.2.0 which is to be moved to SOA 11.1.1.3.0 once environments are complete
    Essentially I have a requirement by where the way we build some of our composites needs to apply to a certain pattern. This patterm is a synchronous request - response by where an immediate response to the client / calling service is provided. By this I mean a client / service will call a SOA composite, the callled composite will receive the message and reply imemdiately with some tracking information and then the called service will carry on its processing. However in terms of the client / callee service the interaction is complete. (e.g. do not provide further updates).
    The above is an adaptation of Fire and Forget however we desire to pass back some meaningful trascking / support information to the client.
    Following implementation of this in development, we have noticed that the interaction is essentially blocked until all services are complete. Therefore A --> B --> C, even though B has responded to A and then called C, A remains running until all composites are complete
    I'd envisage this is related to transactions and threads etc, however I was wondering if there were any properies thats could be set to alleviate this problem. I have considered using bpel.config.transaction etc.
    Currently placing a checkpoint (by no means ideal) after the reply resolves the issue. Presumeably as this forces dehydration
    Any thoughts would be appreciated
    Regards Dave

    Hello Dave,
    From my point of view, you should pass the message (immediately after receiving) to a intermediate storage (AQ, JMS, FILE/FTP) and then reply back with required info to the client. Let process C poll the intermediate location for incoming messages and perform rest of the processing. So calls will be like -
    A--> B --> Storage (JMS/AQ/FILE/FTP)
    Storage --> C
    Above solution would be good in case the frequency of messages from client is high. I don't know whether it fits in your requirement but this is an option.
    Regards,
    Anuj

  • Adobe Acrobat 9 Pro deployment issue

    Hello. I am having a deployment issue with Adobe Acrobat 9 using Altiris. I create the rip which is bassically an image of the install. My facility has pruchased 50 seats for this software so I know we are covered for the users that we have to use this software. The issue that I am having after I make the rip, and deploy it to a machine it asks for the CD key again in order to use. Am I having an issue with my installation or is Adobe put some kind of security into their software so that when you try to make a rip of the installation is asks for teh CD Key again after the install? Is this an issue that can be resolved?

    SOLUTION:
    The issue was somehow related to DPI (START > Settings > Control Pannel > Display > Settings Tab > Advanced button). Eventhough the DPI was set to normal, I switched it to LARGE, restarted the machine, logged in after the reboot, changed it back to normal size, restarted again, logged in once more, checked the Printer Preferences and PRESTO --- a properly displayed window.

  • Deploy issue from JDeveloper 10.1.3.5 to OAS 10.1.2

    I have written an application using ADF on JDeveloper 10.1.3.5 and need to deploy it to our OAS 10.1.2. I have run the adfinstaller on the linux server to upgrade the ADF libraries to the correct versions, updated the web.xml files to have the correct versions, changed to J2SE 1.4.2_19 for the application and have still got deployment issues.
    Error
    An error occurred while redeploying application "FormsSiebelIntegration". See base exception for details.
    Resolution:
    See base exception for details.
    Base Exception:
    java.lang.UnsupportedClassVersionError
    com/sun/faces/application/ApplicationAssociate (Unsupported major.minor version 49.0). com/sun/faces/application/ApplicationAssociate (Unsupported major.minor version 49.0)
    Removing the jsf-impl.jar file allows the application to deploy, but when running on the app server I get the following errors:
    OracleJSP: oracle.jsp.parse.JspParseException:
    /codename.jspx: Line # 6, <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces" xmlns:afh="http://xmlns.oracle.com/adf/faces/html">
    Help! I'm starting to have total mind block as to what to do next.
    Error: Unable to load taghandler class: http://java.sun.com/jsf/html

    I had already applied all of this before trying to deploy.
    The error seems to be a versioning error in the jsf-impl.jar file as the ApplicationAssociate class is found there. I have changed the JDK and J2EE to 1.4.2 and 1.3 respectively, rebuilt everything, updated all the settings to the right versions for 10.1.2 but it still keeps failing on the deploy.

  • A very urgent deployment issue about DBAdapter

    Hello All,
    I have a very urgent deployment issue about DBAdapter.
    That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
    During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
    Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
    I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
    This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
    I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
    By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
    Anyone could help and many thanks.
    Kerr
    Message was edited by:
    Kerr

    Hi Kerr,
    The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
    When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
    Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
    Hth,
    Sjoerd

  • Can't restore my iPhone 3gs. Tried 4 different Macs and 1 PC, all issue error response, mostly

    can't restore my iPhone 3gs. Tried 4 different Macs and 1 PC, all issue error response, mostly errror 2001 snd the PC cited error #21. Even tried different USB cable.
    It started by not turning on and it still does not unless plugged in. Then once it displayed a colorless grey screen that said "no service" and the battery symbol said 100 %. After resetting the iPhone it now is recognized as an iPhone in recovery mode.

    sounds like it's time to bring your phone in for evaluation

  • Re: Deployment Issues

    Hi Dale;
    We have the similar situation. We wrote an application to be able to send
    alert message before we shut down the Forte application. When we upgrade our
    applications, we will send alert message to all users before we shut down the
    Forte application through ECONSOLE which forces all users to log out, and then
    overwrite the files.
    Our client files are sitting at one of our network servers instead of
    individual user's PC, so the user accesses the files through network. So we
    are facing the same issue that we have to shut all users down before we
    upgrade our applications. If you install those files on your individual user's
    PC, you may try to use "compatible level" to update your application.
    Hope this helps.
    Lu Wang
    Eli Lilly and Company
    [email protected]

    My problem lies more in the way that we update the Forte software. We are
    controlled enough with a new distribution from the application side that
    there are not problems there.
    My question is: how is everyone updating their client PC's from say Forte
    R2 to R3. This was not a problem before because we didn't have very many
    clients. Now we have quite a few and we can't just copy the proper files
    because of the registry updates that are required.
    Does anyone have any suggestions? Can I run the Forte client software off
    the Novell server?
    Thanks,
    Tony
    -----Original Message-----
    From: Lu Wang X1 <[email protected]>
    To: Dale V. Georg <[email protected]>
    Cc: Forte Users <[email protected]>; Gardner, Steve
    <[email protected]>
    Date: Wednesday, November 19, 1997 11:17 AM
    Subject: Re: Deployment Issues
    You are right. Through econsole, we can only shut down the serverpartitions,
    even though we can uninstall the application, as long as the clientpartition
    is running, we can't overwrite the files. We were probably lucky that nouser
    was running the application when we upgraded it.
    Since our applications can capture the system alert message, probably wecan
    make changes to our application to be able to shut itself down when it
    receives certain type of alert message. Just a thought. Don't know ifthere
    is any better way to handle it.
    Lu
    "Dale V. Georg" <[email protected]> on 11/19/97 03:02:27 AM
    Please respond to "Dale V. Georg" <[email protected]>
    To: Lu Wang X1/AM/LLY
    cc: Forte Users <[email protected]>, "Gardner, Steve"
    <[email protected]>
    Subject: Re: Deployment Issues
    On Tue, 18 Nov 1997 11:04:53 -0500, Lu Wang X1 wrote:
    Hi Dale;
    We have the similar situation. We wrote an application to be able to send
    alert message before we shut down the Forte application. When we upgradeour
    applications, we will send alert message to all users before we shut down
    the
    Forte application through ECONSOLE which forces all users to log out, andthen
    overwrite the files.If I remember correctly, econsole will only forcibly close down the
    server partitions, not the client partitions.
    Our client files are sitting at one of our network servers instead of
    individual user's PC, so the user accesses the files through network. So
    we
    are facing the same issue that we have to shut all users down before we
    upgrade our applications. If you install those files on your individualuser's
    PC, you may try to use "compatible level" to update your application.We did think about using the compatibility level at one point, but that
    introduces extra maintenence whenever a new version of the application
    is rolled out. On the other hand, if that's the cost of a smooth and
    reliable upgrade, then it may be worth paying.
    Dale
    ================================================
    Dale V. Georg
    Systems Analyst
    Indus Consultancy Services
    [email protected]
    ================================================

  • Immediate Response required for Fire-and-forget OSB pattern.

    Hi,
    I have a BPEL process (fire-and-forget pattern) which runs for few minutes, but want to send an immediate response back to the caller. The important condition is to have a Proxy implemented as a WSDL-based service type.
    For this, I am calling BS (of BPEL process) in request pipeline and sending a changed $body in response pipeline; but the OSB response document us null, though in response pipeline, I do see $body getting replaced.
    Any pointers will be really helpful.
    Thnx,
    Nikhil

    like AbhishekJ said
    if you defined your operation in the wsdl for the proxy service oneway and in the testconsole you do see the body is getting replaced after the routing is executed it's mostly like because of the oneway operation on your proxyservice itself, make it synchronous and do a test again?
    or put a replace with some static xml in the response pipeline, remove the route and see if if still returns null
    then you're pretty sure it's the oneway operation in the proxy wsdl itself

  • Ear deployment issue.

    Hi,
    i am using jdev Studio Edition Version 11.1.1.4.0
    I have created EAR of my application and trying to depoly it on Weblogic server.
    I have following entry in weblogic-application.xml
    <library-ref>
    <library-name>adf.oracle.domain</library-name>
    </library-ref>
    [03:12:39 PM] ---- Deployment started. ----
    [03:12:39 PM] Target platform is (Weblogic 10.3).
    [03:13:07 PM] Retrieving existing application information
    [03:13:07 PM] Running dependency analysis...
    [03:13:07 PM] Building...
    [03:13:28 PM] Deploying 3 profiles...
    [03:13:29 PM] Moving WEB-INF/adfc-config.xml to META-INF/adfc-config.xml
    [03:13:30 PM] Wrote Archive Module to /home/kpophale/CDMR/13June/frontend/ConsoleApps/AppsInventoryManagerUi/deploy/AppsInventoryManagerUi.jar
    [03:13:38 PM] Wrote Web Application Module to /home/kpophale/CDMR/13June/frontend/ConsoleApps/AppsInventoryManagerUi/deploy/AppsInventory.war
    *[03:13:38 PM] Removing the following prohibited entry from the EAR: lib/trinidad-api.jar*
    *[03:13:38 PM] Removing the following prohibited entry from the EAR: lib/trinidad-impl.jar*
    [03:13:38 PM] removed bundleresolver.jar from lib because it cannot be part of an EJB deployment
    [03:13:54 PM] Wrote Enterprise Application Module to /home/kpophale/CDMR/13June/frontend/deploy/AppsInventoryManager.ear
    [03:13:55 PM] Entering Oracle Deployment Plan Editor
    [03:15:53 PM] Deploying Application...
    [03:16:41 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application AppsInventoryManager on AdminServer.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
         java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
    [03:16:41 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application AppsInventoryManager on AdminServer.: [Deployer:149145]Unable to contact 'osb_server1'. Deployment is deferred until 'osb_server1' becomes available.; nested exception is:
         java.rmi.UnknownHostException: Could not discover administration URL for server 'osb_server1'.
    [03:16:41 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application AppsInventoryManager on AdminServer.: [Deployer:149145]Unable to contact 'soa_server1'. Deployment is deferred until 'soa_server1' becomes available.; nested exception is:
         java.rmi.UnknownHostException: Could not discover administration URL for server 'soa_server1'.
    [03:16:41 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application AppsInventoryManager on AdminServer.: [Deployer:149145]Unable to contact 'adf_server1'. Deployment is deferred until 'adf_server1' becomes available.; nested exception is:
         java.rmi.UnknownHostException: Could not discover administration URL for server 'adf_server1'.
    [03:16:41 PM] [Deployer:149193]Operation 'deploy' on application 'AppsInventoryManager' has failed on 'AdminServer'
    [03:16:41 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application AppsInventoryManager on AdminServer.: Failed to load webapp: 'trellis-AppsInventoryManagerUi-context-root'.
    [03:16:41 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'trellis-AppsInventoryManagerUi-context-root'
    *[03:16:41 PM] Caused by: java.lang.NoClassDefFoundError: org/apache/myfaces/trinidad/webapp/UIXComponentELTag*
    [03:16:41 PM] See server logs or server console for more details.
    [03:16:41 PM] weblogic.application.ModuleException: Failed to load webapp: 'trellis-AppsInventoryManagerUi-context-root'
    [03:16:41 PM] #### Deployment incomplete. ####
    [03:16:41 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    I am getting above exception while i am trying to depoly the my ear. please see bold lines.
    Please give me some guide line .
    Regards,
    Kiran.

    Hi John,
    Yes I have. I even tried on two seperate WebLogic installations. I noticed, even when I create just an ear file (not deploy to server), it gives me the same warnings about removing trinidad. Is there something i'm missing in JDeveloper?
    For my installations:
    On one Middleware home: I installed: WLS 10.3.5, ADF 11.1.1.5, then ADF 11.1.2 Patch 12611176. configured domain with all ADF/JRF libraries, followed by upgradeADF WLST command. I got same deployment issue.
    On another middleware home: I even just installed JDeveloper 11.1.2, configured a new domain with all librearies. I got same deployment issue.
    FYI: I also added the two Trinidad JSP Tag Libraries to my View Controller Project. I got same error.
    Thank you,
    Gavin
    Edited by: GavinWoods on Feb 14, 2012 6:25 AM

  • EPMA Deployment Issues (Rollback Database)

    I have seen some posts where users were able to rollback their EPMA databases. This could be helpful when running into deployment issues. Can anyone outline the steps that are needed to rollback an EPMA database?
    Thank you

    spring_patel wrote:
    i really appreciate you trying to solve my problem..
    but i think...my estion is fairly simple and straight forward...and i've provided every detail of my problem(if uv'e read my opening post of this thread)....
    and as far as that link goes...i've already checked it b4 u guys mentioned it... as it is provided right there in the tutorial i've provided link of...
    and i've tried my options b4 making use of this forum...and i didnt find a solution that's why i'm taking ur help..
    nevertheless...i repeat my question...
    there's a tutorial at this link...[http://www.netbeans.org/kb/docs/java/gui-db.html]...in it is described how to create a java desktop database applicaiton...
    at the end of the tuorial there is a section called: "Building and Deploying the Application"
    in that section they have instructed to exit netbeans IDE and try and run the application outside it...which is not happening
    the reason they say is that i've to start Java DB from outside of the IDE...that is wat my problem is ..
    i dont know how to start Java DB from outside the Netbeans ide...You are not telling us anything.
    If I tell you "my automobile doesn't work" how do you know what is wrong. Instead I need to tell you one of the following.
    1. The engine didn't start.
    2. The wheel fell off.
    3. The engine caught fire.
    4. When I went to the driveway the car wasn't even there.
    When you "run" something then something happens. When I run notepad from a console window if notepad is not in the path then I will get an error about command not found. if it is in the path then the command executes and notepad pops up. Even if I don't see notepad pop up I know that the command seemed to execute from the command window.
    The above are examples of describing what you did and what did happen. In detail.
    "It doesn't work" provides neither detail about how you ran it nor what did happen when you did attempt to run it.

  • Deployment issue: compatiblity issue with ODP, instant vs full client on PC

    After a lot of deployment issues with full client, we thought we had the solution with Instant Client.
    It worked great for a while, but now some of our users have full Oracle 11 client installed after installing our Instant Client because of other software that requires full client.
    As soon as they install full client, our Instant Client breaks:
    Exception has been thrown by the target of an invocation. (mscorlib)
    The type initializer for 'Oracle.DataAccess.Client.OracleClientFactory' threw an exception.
    The provider is not compatible with the version of Oracle client (Oracle Data Provider for .NET)
    Our instant client is compiled with 2.111.6.20, the client is installing a different version (though I tried installing exactly same version does not seem to work either)
    I've been experimenting to redirect the version to another assembly but no success.
    How can I make Instant Client and Full client co-exist? The whole idea of using Instant was to be independent of other software who needs ODP.NET...
    What do you do when 2 apps need different versions of ORacle ODP.NET (e.g. 2.111.6.0 vs. 2.112.1.0)?
    Note that I don't have source code access to "our" app, so if it is at all possible through configuration, that is a prefered solution.
    I also don't control our customers deployment strategy, they roll out apps over 1000's of PC's

    According to documentation at [http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/featConfig.htm]
    >
    Configuration File Support
    For customers who have numerous applications on a computer that depends on a single version of ODP.NET, the Windows Registry settings for a given version of ODP.NET may not necessarily be applicable for all applications that use that version of ODP.NET. To provide more granular control, ODP.NET Configuration File Support allows developers to specify ODP.NET configuration settings in an application config, web.config, or a machine.config file.
    If a computer does not require granular control beyond configuration settings at the ODP.NET version level, there is no need to specify ODP.NET configuration settings through configuration files.
    The following is an example of a web.config file for .NET Framework 2.0 and higher:
    <?xml version="1.0" encoding="utf-8" ?>
    <configuration>
    <oracle.dataaccess.client>
    <settings>
    <add name="DllPath" value="C:\oracle\bin"/>
    <add name="FetchSize" value="131072"/>
    <add name="PromotableTransaction" value="promotable"/>
    <add name="StatementCacheSize" value="10"/>
    <add name="TraceFileName" value="C:\odpnet2.trc"/>
    <add name="TraceLevel" value="63"/>
    <add name="TraceOption" value="1"/>
    </settings>
    </oracle.dataaccess.client>
    </configuration>

  • EJB deployment issue in websphere

    EJB deployment issue in websphere
    I have created an EJB project in eclipse and created a stateless session bean successfully.
    I created Enterprise application project and added the EJB project.
    I tried to check it using Universal test client.
    When I click the JNDI explorer>>sample.HelloWorldEJBHome
    I get error IWAD0401E Unknown type of JNDI object
    But when I install an EJB jar using administrator console after exporting the jar file for the EJB project
    It is working file
    I like to reduce the number of steps by right clicking the server publish and test.
    Do any one have come across the same issue please help me
    Thanks in advance.

    Hi,
    i have not done any changes to any process. I have created new DC and created new process.
    new DC is not getting deployed with error "Adapter com.sap.glx.adapter.internal.Transformer didn't comply with configuration". If you will check error log above then you will find it their.

  • Hi complex issue, need an immediate response

    hi have d1,d2 as dimensions and f1, f2, f3 as facts all the two dimensions are connected to all the three facts and there are sub dimension to d2->d3->d4 and d4 is joined to d1 as well, now i have to join d2<->d4, how to do the modelling in physical and bmm layers.
    Thanks in Advance.

    Hi,
    Make the joins as is required in the physical layer and then in the BMM layer follow the star schema design, by adding the tables into the General tab.
    Refer-
    http://www.varanasisaichand.com/2012/05/denormalizing-physical-tables-in-bmm.html#!/2012/05/denormalizing-physical-tables-in-bmm.html
    http://gerardnico.com/wiki/data_modeling/snowflake
    Hope this helped/answered
    Kind Regards
    MuRam

  • OBIEE 11g RPD deployment issue.

    I have installed OBIEE 11.1.1.5.0 32 bit on windows7.
    I am getting issue while deploying RPD.
    I clicked on Lock & Edit button and it enabled the "Browse" button.
    I clicked "Browse" button and selected the new RPD file but it is not taking new rpd file.
    I noticed following as soon as I select the new RPD file:
    1. For a second my "New RPD file name" and "Update Button" appears under "deployment" tab but
    2. Page automatically refreshes and comes back with blank (in "Repository File" field) and "Update Button" disappears.
    Please help me..
    Thanks..

    Cnu,
    Thank you for your response.
    It refreshes and come back with blank in "Repository File" field(and "Update Button" disappears).
    I was following steps from below URL:
    http://obiee101.blogspot.com/2010/08/obiee11g-deploying-new-rpd.html
    In my case I am NOT seeing a screen like "screenshot 7" in above URL.
    Few following things I noticed but not sure any clue for problem that I am facing:
    1. "core applications" is down (with red down arrow) in my EM..
    2. "Repository File" field is in Gray Color(after I clicked on "Lock & Edit" button) and it would NOT let me type any text(I tried to enter my RPD path manually). It would let me type the "Repository Password".
    Really appricieate any help...
    Thanks,

Maybe you are looking for

  • Backup on flash drive

    Hi all, Does anyone has made a backup of Oracle Database XE (ARCHIVELOG ON/OFF) directly to a flash drive(thumb drive, dvd,etc).? Is it better to backup on the local disk first and only after that to copy the backup files to the external device? Or i

  • Safari is freezing my computer

    Today I opened a video on FB, and a message said I needed two new plug-ins to run the video. I downloaded those. Since, Safari has locked up again and again. Not only is Safari freezing but my whole operating system. I've had to shut down and re-boot

  • Yet another Exit Code: 6!!!1

    I'm trying to install the English (NorthAmerican) trial of CS5 premiere to see if I can actually get the darned thing to run before I go ahead and drop the money for it.  I get to about 40/45% in the installer when installing premiere, and my list of

  • How to select a bookmark in Word from abap?

    Hi, We are looking for a way to select a specific bookmark from a Word document (opened before from abap, using methods of class I_OI_DOCUMENT_PROXY). The bookmark needs to be replaced by a specific value. We tried call method 'execute macro' .... wi

  • Please let me know if Java.exe and Javaw.exe is embedded in Oracle.

    What versions of Java.exe or Javaw.exe is embedded in Oracle. If java executables are embedded, then please inform what versions of Oracle have Java executables embedded.