Deployment issue with EPMA & Planning in 11.1.2

Hi
I installed the following applications of Hyperion suite:
Essbase
EPMA
CalcManager
Planning
During configuring i configured each product separately since i wanted to configure separate DB for each of them.
The configuration went with no issues. But now when i log-in into workspace and go to Navigate, i only see administer.
There is no option for EPMA and Planning applications.
Did i miss any step?
I have used IIS as my webserver because Oracle HTTP gave me some error while deploying (unable to initiate OPMN). Is it some issue with IIS
I have installed my applications on Win XP SP3, IIS 5.1 and its a 32bit machine

Hi
Please redeploy only the Web Server under shared service. It has to be redeployed once EPMA and others are configured.
Thanks
Rupak
Mantra to Win | WinMantras.com | http://hyperion.winmantras.com

Similar Messages

Issue with Hyperion Planning 11.1.2 EPM

Hi All,
I am facing an issue with Hyperion Planning 11.1.2 which was working till yesterday. When i login into the and go to navigate --> Administor --> Dimension Library i am getting an error which iam not able to understand. kindly help me out. i checked all my EPM services and they are up and working and also i have restarted them but no use. Can someone help me out what should i do. I have also logged in http://<machine name>:19091/awb but getting the same below error.
can someone help me out.
org.apache.jasper.JasperException
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:510)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     com.hyperion.awb.web.util.HttpFilter.doFilter(HttpFilter.java:19)
     com.hyperion.bpm.LocalizationServletFilter.doFilter(LocalizationServletFilter.java:69)
root cause
java.lang.NullPointerException
     com.hyperion.bpm.logon.CSSAuthenticate.authenticateSSOUser(CSSAuthenticate.java:334)
     com.hyperion.bpm.logon.CSSAuthenticate.getAuthenticatedUser(CSSAuthenticate.java:130)
     org.apache.jsp.index_jsp._jspService(index_jsp.java:182)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     com.hyperion.awb.web.util.HttpFilter.doFilter(HttpFilter.java:19)
     com.hyperion.bpm.LocalizationServletFilter.doFilter(LocalizationServletFilter.java:69)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.17 logs.
Edited by: [email protected] on Jul 18, 2009 10:38 PM

Hi,
First question, has anything changed since it worked like admin accounts.
Reboot the machine.
Next, just start the "Hyperion Foundation Shared Services - Web Application" service
Can you log into Shared Services ?
If you can, then start "Hyperion EPM Architect - Web Application" service
Go to http://localhost:19091/awb/ Does the web page display ?
If not then you it looks like EPMA needs reconfiguring.
Next start "Hyperion EPM Architect - Process Manager" service, make sure the service starts and it should start another 4 services.
Next refresh http://localhost:19091/awb/ and try and login.
Cheers
John
http://john-goodwin.blogspot.com/

Deployment issue with Planning & EPMA 11.1.2.0

Hi
I installed the following applications of Hyperion suite:
Essbase
EPMA
CalcManager
Planning
During configuring i configured each product separately since i wanted to configure separate DB for each of them.
The configuration went with no issues. But now when i log-in into workspace and go to Navigate, i only see administer.
There is no option for EPMA and Planning applications.
Did i miss any step?
I have used IIS as my webserver because Oracle HTTP gave me some error while deploying (unable to initiate OPMN). Is it some issue with IIS
I ahve installed my applications on Win XP SP3, IIS 5.1 and its a 32bit machine

Did you reconfigure the web server after you finished configuring all of the products?

Import profiles issue in EPMA Planning

Hello All,
We are working on Hyperion 11.1.2.1. We are using EPMA planning application. We have SQL server as our staging Area. We are having issues with our new Profiles and also with the old profiles. We have an Account dimension member 'xxxx' having TB as Flow, Exchange Rate Type as "Average" in the staging library and also in the EPMA shared library.
When we import the profile we are getting error message saying "All 'Hierarchy' property updates for member 'xxxx' were rolled back due to a validation error; please correct the properties in error indicated in the validation message and re-import the 'Hierarchy' section for this member to apply all member property updates. ValidationMessage: 'Property value 'Average' is invalid for the 'ExchangeRateType' property."
When try to import the new profile we are getting more no of errors than the old proflie.
Can anyone suggest what might be the issue.

Try checking the following document on MOS -
Importing Dimension to EPMA from ADS File With "Replace" Option Results In Corruption [ID 1076883.1]
Its for 11.1.1.3 but sound like you are running into a similar kind of issue.
Thanks,
hyperionEPM
Please mark answers as correct or helpful for others to find them easliy.

SAP DS 1.3: Performance issues with crosstab planning (IE only)

Hi everyone,
because im currently developing a custom component for DS 1.3, I got in touch with the planning feature of design studio. Planning currently only works in a crosstab.
Here I recognized a significant performance issue with the internet explorer:
If you simply type in a new value into a cell in a crosstab, it takes ~10s to confirm it (not constant! Sometimes it takes 2s, sometimes 15s). During this 10s, it seems like the IE crashed - no response at all. Sometimes there is also a warning message on bottom ('... script is slowing down the application ...').
Tested the same scenario with Chrome and FF - takes less than 1s to confirm.
Whats going on here ...? Anyone experienced the same issues?
My testing environment:
Windows 8.1
IE 11 (also tested emulated Ie 10 and IE 9 - same problem)
DS 1.3.0.3.201405141058
Local mode
Application only contained a simple crosstab, data source based on BW 7.3 query
Of course I deactivated all custom components while testing...
Kind regards
Wladimir

Hi Tammy,
Thanks for your reply. Of course, my IE is updated to latest version (11.0.9600.17207).
Hopefully SP1 will fix this bug...
Kind regards
Wladimir

Issue with setting Planning Data Source

I keep getting error when I try to set up the data source
the Oracle database = orcl
The data base schema EPMAPLAN
Password = EPMAPLAN
when i log on i to Oracle Database
Sys as SYSDBA
Password = Password01
so what what should be the Database Source Name = ORCL Correct ????
Server = win-392h1l307n1 or localhost
Databse = ORCL
User Name = ????????????
Password = ?????????
I try all the combinations
Please advise

Duplicate post - Issue with setting up planning data source
Cheers
John
http://john-goodwin.blogspot.com/

Jdeveloper Deployment issue with OC4J

I am using JDEVELOPER with Standalone Version of OC4J. I am trying to deploy the application EAR file generated using JDEVELOPER deploymnent wizard in to Standalone instance of OC4J. I am having issue with the Application server connecton wizard.
I do not know the 'admin' password of the OC4J standalone instance. I am able to start the instance with 'java -jar oc4j.jar'. I am able to access the instacne with
http://localhost:8888.
I am having issue with the Application server connecton wizard. It requires 'admin'
password to create a connection with the app server. The deployment could not succeed without the password.
I would appreciate feedback and suggestons.
Thanks.
Palani

This will reset the password to welcome for you (I've had this problem too - it happens if OC4J doesn't shutdown properly)
java -jar oc4j.jar -install
Enter an admin password to use: welcome
Confirm admin password: welcome
Installation done

Load issues with integrated planning

I have a cube XYZ. Sometimes some key figures are wrong and they should be manual changed. I use a real time cube for adjustment. I loaded all data from cube XYZ to real time cube. I changed some key figures with integrated planning. Now I have to load correctional data to XYZ. If I use delta, in first request all data will be loaded to XYZ. In this case, I have double data in XYZ.
My question: how can I load only correction data to XYZ?

Hi,
After you have loaded from XYZ to the real time infocube, you make a initialization without data transfer back to XYZ. This means that the change pointer is reset.
Then you change the records in the real time infocube. These changes will be put in a new request which equals the delta queue (because you reset the change ponter).
Make a delta load from the real time cube to the XYZ cube => only the changes are moved.
Hope this answer helps
Best regards,
Keld

EPMA 11.1.1.3 manual deployment issues with WEBLOGIC in EAS and WEBANALYSIS

Hi all,
As we are working on 64 bit machines, we have to deploy hyperion products manually with WEBLOGIC. other than EAS and WEBANALYSIS, all the products are working fine.
we have followed all the steps related to manual deployment. but still we r getting JAVA related error. so if anything else that we need to perform other than normal manual deployment steps, please let me know.
NOTE: EASDOCS, HBRLAUNCHER, are working but EAS is not been deployed.
Regards

Is your WebLogic 32-bit or 64-bit WebLogic? What specific O/S and version are you using? Some of the products make use of 32-bit native libraries's for JNDI and there are not 64-bit native libraries available unless you are using the AIX or Solaris Platform and even then not all products are supported for 64-bit.
If you were to use 11.1.2 it supports most of the product suite in 64-bit on most platforms.
Refer to support matrices at: http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
Regards,
John A. Booth
http://www.metavero.com

HFM deployment issue on EPMA - The application already exists

The first time I deploy the HFM application everything works fine until I try to redeploy after deleting the application. I have tried registering the application to SS and then try deleting it from there but that does not work. Here is my deployment abort details:
Submitted Time : Saturday, March 21, 2015 3:38:22 PM
Last Updated Time : Saturday, March 21, 2015 3:38:33 PM
User Name : hypadmin
Process Name :
Thread : 0
Server :
Detail : Initiating Product Action...
Generating Headers and Callback Information...
Generating Application Data...
Posting Product Request...
Waiting For Status Updates...
PRODUCT_UPDATE: Update from product
Financial Management is transforming metadata from EPMA...
Creating Application...
The application already exists.
Please help and thank you.
Gideon Seroney

Got around this issue by creating a classic application over the epma app, provision admin then delete it from consolidation admin.
Unfortunately it seems that the epma application should never have been registered like a classic app. Always perform 'deploy' and never 'register' since it get stuck in SQL data tables. Unless you are a DBA I would not suggest monkeying with the tables to begin with.
Thanks!

Deployment Issues with Custom TS variables set for client

Good Day folks!
I have come across an interesting issue that I have not been able to find a quick fix as such I am looking for some ideas where to trouble shoot my issue moving forwards.
So the Issue:
I have a TS that deploys a Windows 8.1 SOE image, this is done first by using a PXE boot PE image for an “unknown” systems to load a Custom HTA. This HTA allows me manually add the system to SCCM and add it to a required deployments collection that has the
8.1 SOE deployed to it.
The HTA also sets a few custom variables for the system resource things like system location, Machine Domain etc.
Once the HTA has run the system then has a delay to allow for the resource to show up tin the 8.1 deployment collection and then closes.
Now all this appears to work fine, the system is added to the collection, reboots and the deployment runs from start to finish without error.
I can also check the system resource and the variables are present.
The problem I have found is that the custom variables for this resource are not being used by the TS after reboot.. upon further investigation I found that these variables are not even being retrieved ( ran a VB script to save all the variables from the
TS to a txt file to check this ) Because of this the TS is bypassing some needed TS Tasks.
A few interesting things to note:
System appears to be added again when AD discovery is run…. So it causes a Duplicate.
Client Dose connect to SCCM server after deployment but is not receiving deployments ( is getting some policy )
Worked with SCCM 2012 but not 2012 R2
So it appears that when the system reboots from the HTA PE step it has identified itself as an unknown system again…. Even though it has been manually added…
I am interested to know if first of all if others would agree with this and second how SCCM while running a TS matches itself up to a system to retrieve the custom set variables before client install etc... Or a good place to start looking
to dig up more information! Or anything else!
Thanks
Stuart.

Have you taken a look at this hotfix?
http://support.microsoft.com/kb/2907591
We had to apply it in order for our variables to be seen.
joeblow

Deployment Issue with Rules file

Hi,
We have Rules file issue after the deployment in Development and Re7 environment.
We have modified/created the rules file and after the deployment if we execute the rules file from the treatment then we got the error message like mentioned below.
MAXL> Import database PGC_CHE.Pgc_che data from data_file
"/pgcre701/pgc/subsidiary/che/tfi/pgc_nature_for_data_che.txt" using server rules_file "DO_MX_05" on error
write to "/pgcre701/pgc/trc/PGC_150310_103739_pgc_nature_for_data_che.err";
ERROR - 1019006 - Unable to Read
[/logiciel/epm11/user_projects/epm_inst4/EssbaseServer/app/PGC_CHE/Pgc_che/DO_MX_05.rul], Created Using A
Previous Version.
ERROR - 1241101 - Unexpected Essbase error 1019006.
If the same rules file opened through EAS console from SVN trunk or local and save as this rule file into Essbase server(through EAS console) then the rules file working correctly from the treatment process launch like mentioned below.
MAXL> Import database PGC_CHE.Pgc_che data from data_file "/pgcre701/pgc/subsidiary/che/tfi/pgc_nature_for_data_che.txt" using server rules_file "DO_MX_05" on error write to "/pgcre701/pgc/trc/PGC_150310_134622_pgc_nature_for_data_che.err";
OK/INFO - 1019061 - Reading Rule SQL Information For Database [Pgc_che].
OK/INFO - 1019025 - Reading Rules From Rule Object For Database [Pgc_che].
OK/INFO - 1003040 - Parallel dataload enabled: [1] block prepare threads, [1] block write threads..
OK/INFO - 1003037 - Data Load Updated [18800] cells.
OK/INFO - 1003053 - Data Load Elapsed Time with [DO_MX_05.rul] : [1.16] seconds.
OK/INFO - 1241113 - Database import completed ['PGC_CHE'.'Pgc_che'].
Could you please help us on this point ?
Thanks in advance for your help.
Essbase server 11.1.2.3.501 server LINUX red hat

Hi John,
it's not quite that
I will provide more detail:
In fact, we are 3 server Essbase : development, acceptance and operational there are a lot the new version of Essbase 11.1.2.3.501.
The maxl treatment are launch since a other server : a treatment server that are a client maxl and ESSCMD in the same version.
Before that, I'm migrate all the application and database from all alder server Essbase to this new architecture Essbase.
All application and DATABASE (in BSO) was migrated by expot-import process, the all object (csc, rul, rep ...) was transfer by copy in each directories of database.
The test after migration are very satisfying.
Now, we are on process of life on the Essbase server 11.1.2.3.501.
The back office of India used the usually process to developed the lot.
They take the source on SVN application (take the rule), deployed the rule on the development server, modify the rule and have this error.
This error not appear after migration with the same rule ...
I am skeptical
Tx to your help on this subject.

Issue with FR Planning Connection

Hi All,
We are using ASO Planning Application of version 11.1.2.3. We are unable to use Essbase connection for ASO Planning application and hence we are using Planning connection in FR. With this we are unable to see Hierarchies in Parent-Child Relation. When we trying to open a FR Report, it is displaying the members in a Flat hierarchy. Pls. help
Thanks,
PVR

Which version? It would be good idea to check the latest patchset readme released for the version and check if any known issues are fixed.

Deployment Issue with MDM Java API exposed as Webservice using EJBS

Hi Experts,
I am implementing MDM Java APIS in Stateless session bean.Exposed that bean as Webservice and using that webservice in
Webdynpro through Adaptive Webservice Model.
I am facing following issue:
Webservice works fine after deployment,after some number of execution webservice stops working and gives exception.After
Redeployment of the Webservice, it starts working again works fine some number of execution.
I am Using new MDMJava API.
MDM Server Details: MDM 5.5 SP06
I am using following code for connetion
//////////////*************Getting Connection************///////
          ConnectionPool pool = null;
          String sessionId = null;
          try {
               pool = ConnectionPoolFactory.getInstance("Server Ip");
          } catch (ConnectionException e1) {
               System.out.println(e1.getMessage());
//////////////*************Repository Session************///////
CreateRepositorySessionCommand repSeession =
               new CreateRepositorySessionCommand(p_pool);
          repSeession.setRepositoryIdentifier(p_repId);
          try {
               repSeession.execute();
          } catch (CommandException e2) {
               System.out.println(e2.getMessage().toString());
          String repIID = repSeession.getRepositorySession();
          //     Authenticate Repository
          AuthenticateRepositorySessionCommand autRepSeesion =
               new AuthenticateRepositorySessionCommand(p_pool);
          try {
               autRepSeesion.setSession(repSeession.getRepositorySession());
               autRepSeesion.setUserName(p_user);
               autRepSeesion.setUserPassword(p_Password);
               autRepSeesion.execute();
          } catch (CommandException e3) {
               System.out.println(
                    "RepSession Seesion" + e3.getMessage().toString());
          return autRepSeesion.getSession();
//////////////*************user Session************///////
GetRepositoryRegionListCommand regionListCommand =
               new GetRepositoryRegionListCommand(p_pool);
          regionListCommand.setRepositoryIdentifier(p_repId);
          try {
               regionListCommand.execute();
          } catch (CommandException e) {
               System.out.println(e.getMessage().toString());
          RegionProperties[] regions = regionListCommand.getRegions();
          //                                 create a user session
          CreateUserSessionCommand UsersessionCommand =
               new CreateUserSessionCommand(p_pool);
          UsersessionCommand.setRepositoryIdentifier(p_repId);
          UsersessionCommand.setDataRegion(regions[0]);
          // use the first region
          try {
               UsersessionCommand.execute();
          } catch (CommandException e) {
               System.out.println("UserSession" + e.getMessage().toString());
          String UsersessionId2 = UsersessionCommand.getUserSession();
AuthenticateUserSessionCommand authUserCommand =
               new AuthenticateUserSessionCommand(p_pool);
          authUserCommand.setSession(UsersessionCommand.getUserSession());
          authUserCommand.setUserName(p_userId);
          authUserCommand.setUserPassword(p_password);
          try {
               authUserCommand.execute();
          } catch (CommandException e) {
               System.out.println("User Seesion" + e.getMessage().toString());
          return authUserCommand.getSession();
//////////////*************Destroy Session************///////
     DestroySessionCommand destroySessionCommand =
               new DestroySessionCommand(p_pool);
          destroySessionCommand.setSession(p_repsession);
          try {
               destroySessionCommand.execute();
          } catch (CommandException e) {
               e.printStackTrace();
          destroySessionCommand.setSession(p_Uesrsession);
               try {
                    destroySessionCommand.execute();
               } catch (CommandException e) {
                    e.printStackTrace();
Do we need to relase the connection pool object also?
Can anyone help me with the code how that can be achived?
Please Reply if anyone has come accross similar issue or know what can be the solution.
Thanks in Advance.
Regards Shruti
Edited by: Shruti Shah on Dec 18, 2008 12:52 PM

Hi Nitin,
Thanks for the prompt Response.
Even I am guessing that its becose of Connection pool.
I am destroying session as follows
               DestroySessionCommand destroySessionCommand =
               new DestroySessionCommand(p_pool);
          destroySessionCommand.setSession(p_repsession);
          try {
               destroySessionCommand.execute();
          } catch (CommandException e) {
               e.printStackTrace();
          destroySessionCommand.setSession(p_Uesrsession);
               try {
                    destroySessionCommand.execute();
               } catch (CommandException e) {
                    e.printStackTrace();
But I didnot find any method by which i can close realsse connection from connection pool.
It would be great if you can help me how close or realese those connection.In MDM Console i am able to see those sessions even after destroying them.
Regards Shruti.

Cisco security manager deployment issue with invalid command

Running CSM 3.3.1, to manage an 800 series pre-configured router.
The router has a number of policy ACL's and class-maps configured. When the config is imported to CSM a number of warnings are seen reporting that some of the interfaces are unprotected by ACL's, which is correct, no serious errors are reported and the device is succesfully imported.
But, when I look at the configuration within CSM non of the ACL's or the class maps are shown.
Also, when I configure some feature on the router, during the deployment phase I get an error indicating that there is an invalid protocol under one of the class maps associated with an interface. The protocol in question is bittorrent. This error prevents depolyment of my changes. In fact this causes my client to hang, eventually if I close the application windoes reports that the issue is caused by javaw.exe faiing to respond.
If I take out the bittorrent protocol under the class map then all seems well.
So, I though flexconfigs would resolve this, enabling me to import the config with the unsupported command. I created a flexconfig with the class map and the invalid protocol. When I re-imported the device there is still a lot of configuration features that are on the router but are missing in CSM.
I'm not sure how to resolve this, the router was not configured through CSM in the first place.

Update to this, the CSM is also altering firewall configurations, if I import a configuration from an ASA running 8.0.4 code, then compare that configuration to that running on the same ASA there are quite a few differencies. Some of these are not items that CSM reports as requiring Flexconfig support, which concerns me.
This is not the first time I've seen this occur, customer is concerned about the reliability of the way this system handles configurations, and I cannot explain why it exhibits this process.
Anyone else seen this, and found a work around?

Deployment issue with EPMA & Planning in 11.1.2

Similar Messages

Maybe you are looking for