Deployment of Acrobat 7.0 Pro using Zenworks on users with user only privileges

I'm ready to just slam this Server !!! ... I've created an Adobe .MST (slient install)
After the installer start, i get "You do not have sufficient privileges to run this installer setup will now terminate".
All the IDES users have either (Power User or User) privileges ...
Is there a Work Around???
all files are saved on Novell Network
Server called= Goofy
Volume= Disney

It is interesting that you say it is an Adobe bug (or at least that is the implication I got). Part of the problem with VISTA has been that there are a lot of programs that do not work. That is also why many businesses and individuals are still using XP and refused to upgrade. VISTA has a service pack out, but I hear it still has lots of problem. MS has fixed VISTA where there own software was concerned, such as putting the help system back in that they had removed. I am not trying to say that VISTA is not the way to go, but that the blame for things not working should not be put on other software developers.
The $1500 must be for CS, since an upgrade to AA8 from AA7 is only $159. In today's market, AA7 is actually an old man with AA8 being out for quite a while. Six months ago you could still get XP Pro for about $190. I understand it is now almost $800, but I really don't track the prices. I am getting a new machine with VISTA on it in a week or two and plan to look at it a bit (called give it a chance). However, I fully expect to remove VISTA and install XP Pro. To me, that cost is a lot better than upgrading all of my software because of the changes in Windows.
So which system has the bug, Adobe or VISTA. I think you will find a lot of folks who say it is VISTA (that is not to say that Adobe doesn't have some issues also). Hope you get your system working satisfactorily.

Similar Messages

Deploying Adobe Acrobat 7.0 pro using Executive Sitekeeper

Good morning all,
I need help creating a command in Executive software's Sitekeeper to uninstall Adobe Acrobat 5.0 from our user community so that I can deploy adobe acrobat 7.0 pro to our user community using Sitekeeper.
Thanks
Lloyd

what does sitekeeper need to know in order to uninstall software? can it take standard command line stuff?

Deployment of Acrobat 7.0 Pro using Novell Console1

I'm trying to use Zenworks to deploy my MST file .... it's save on my network drive ...I want to use UNC coding... can anyone help me? ..
if possible, Please provide all entries ... My novell Object requires three lines under ... Run options > Applications.
Path to file:
Parameters:
Working Directory:

what does sitekeeper need to know in order to uninstall software? can it take standard command line stuff?

Why r we not use tablespce begin backup with read only tablespace

why r we not use tablespce begin backup with read only tablespace

Please learn English prior to posting. The schools in India are not that bad!
Please RTFM.
Please stop asking doc questions at lightning speed.
Please go figure
Sybrand Bakker
Senior Oracle DBA

Can I use my iphone 5s with wifi only if I don't have a cell phone plan

Can I use my iphone 5s with wifi only if I don't have a cell phone plan

Yyou will need a SIM card to activate it.
It does not have to be an active SIM card.
Once you have activated it, it should work just fine.

How to use a Socks5 Proxy with authentification only on specified sites? Any Addons?

Hey, I want to use a Socks5 proxy that requires authentification but only on specified sites.
Unfortunately, Foxyproxy does not support such proxies.
Is there an addon or some hidden Firefox feature that allows this?

Thanks for the suggestion but I'm looking for a convenient way to avoid blocked content on YouTube and co. I figured this would be superior to all those unblocker extensions since I have access to a fast proxy anyway.

Using jquery to user only allow numbers in single line text field with infopath 2010 form

Please provide me right solution for the same.
I have already used below script, but this is not working
<script type="text/javascript">
   $(document).ready(function () {
var input = document.getElementById('ctl00_m_g_85322960_0783_4665_a3e7_41708ddd7c1c_FormControl0_V1_I1_T3');
input.onkeydown = function(e) {
    //var k = e.which;
    /* numeric inputs can come from the keypad or the numeric row at the top */
     if (e.shiftKey || e.ctrlKey || e.altKey) {
e.preventDefault();
} else {
var key = e.keyCode;
if (!((key == 8) || (key == 46) || (key >= 35 && key <= 40) || (key >= 48 && key <= 57) || (key >= 96 && key <= 105))) {
e.preventDefault();
</script>

Hi,
As Matt mentioned, it is OK to change field type to number if you want only number can be entered in the textbox. If you want to treat them as string in the backend, you can use CONVERT function to change its data type in the code.
If you insist on jquery, try to change condition paremeter in IF to:
key >
31 &&
(key <
47 ||
key > 57)
The order number of numbers (0 ~ 9) is from 48 to 57 (in Dec).
Miles LI TechNet Community Support

E63: Use chat/facebook etc with wifi only?

Hello again,
I get the feeling I'll be on this forum a lot while I work out how to use my phone
Earlier in the day I was web browsing on my E63 phone. I had gone to the browser by selecting my WLAN network, connecting it and from there going to 'start browsing'. Afterwards I checked my credit and it was still the same (around the $8 mark).
Later on, however, I went to the web by using the shortcuts on the home screen (Web and Facebook). I also used the built in chat program (the one under Installations) for a short time. When I checked my credit next it was pretty much at $0.
I am assuming (but I'm not sure) that when I used either the web/Facebook shortcuts and/or the chat application, they connected via my service provider (Optus) instead of through my WiFi.
Is there any way to a) work out which of these things was responsible for eating all my credit and b) make it so that the web and chat shortcuts automatically connect through wifi and not through my service provider? There may be an obvious answer somewhere but I couldn't find it in the manual, so any help would be greatly appreciated.
Sorry that was so long, I'm just hoping I can figure this out. I bought this phone so I could chat and use the web through wifi so I wouldn't have to pay for it, and if I can't do that it will almost have been a waste

Hi,
Thanks for your reply. I have managed to fix the problem by deleting the other access points and only having my WLAN, so it always asks before connecting (if I need the other ones I can always reenable them by saving the settings again from the original message).
If anyone else is interested, I found this discussion to be helpful as well:
/t5/Eseries-and-Communicators/Nokia-E63-Internet-data-amp-Wifi/m-p/720366

Acrobat reader 9 pro

Hello,
who knows where I can find on Acrobat Reader 9 Pro exemplary prensentation (work sheet) for brochuers etc.?
I am looking for something like from MAC pages or iWork also for the PC.
Thanks for information
Werner

There is no product called Acrobat Reader 9 Pro. The is Adobe Reader (which only views and prints pdf files) and Adobe Acrobat Pro (which also creates, and can alter pdf files). You cannot really compare Mac pages or iWork for a Mac with Acrobat. The closest thing to the iWork for the Mac is either Microsoft Office (commercial) or Open Office (open source).

Using Adobe Customization Tool XI to deploy Acrobat STD and PRO

Hello,
I'm using Adobe Customization Tool XI to build Adobe Acrobat STD and PRO packages.
It seems that none of my changes stick during deployment.
Example: I open AcroStan.msi with the tool. Make all necessary changes and generate transform file. I then exit without saving changes to AcroStan.msi file.
After that I test the installation in C:\Test folder with the following command:
msiexec /i acrostan.msi TRANSFORMS=test.mst
Installation window pops up since I didn't use silent installation switches, but none of the information I have provided are available, it defaults to out of the box experience asking for serial number as well.
Am I doing something wrong?
Luke

I have created .mst file named test and put it in c:\New Folder along with all source files, including AcroStan.msi
Command line:
c:\new folder>msiexec /i AcroStan.msi TRANSFORMS=test.mst /qb (I've used QB to watch the progress).
It failes with this error attached below.
We can close this subject though.
I've started testing this on different machines and they all work fine.
I have many VMs to test on, and the one I have picked to start with is causing the above error so I'm going to link this issue with the OS.
Other VMs and desktops are working great.

Mac User Cannot Use Form Created in Windows Acrobat 9.0 Pro

I have created a form and emailed it to a Mac user. He does not know what version of Acrobat he has or even if he is using a full version of Acrobat or Acrobat Reader (I tried to walk him through to check his version, but he could not find it).
He is using a laptop that is about 5 years old.
Anyway....I created this form in Acrobat 9.0 Pro. It works great for me...when I type in the fields, the text falls perfectly on the lines; the autocalculate works perfectly, and the RESET button works perfectly. When he opens the file, the text shows all below the lines, the autocalculate does not work at all, and neither does the RESET button. He sent it to another person, and they too could not use the form.
I have enabled the PDF so it can be filled out by Reader users and it is not in PDF/A mode, but it still is not working for him. I went to the library where they have a Mac and I was able to open it through Acrobat Reader 9 and again, I was able to fill the form out and it worked perfectly for me.
Would anyone be available (with a Mac) through email so I could send you the file to see if any Acrobat pros might be able to tell me what is wrong with it? I am absolutely frustrated to the points of tears over this. If you do not want to place your email here, I will give you mine so you can email me first ([email protected]); just let me know here that you are emailing me so I know to check email rather than check here.
Thank you!
Laura

He's probably not using either Acrobat or Reader. The Mac comes with a built-in PDF viewer named Preview and it has limited support for PDF forms. It even corrupts them when it saves. It should definitely be avoided. Fortunately Reader is freely available, you just have to get him to install it.

How can I execute an action in Acrobat XI Pro using PowerPoint VBA?

I am using Acrobat XI Pro and PowerPoint that came with Office 2013 running on Windows 8.
I have an action in the Action Wizard that executes JavaScript code. It works fine when I click Tools | Action Wizard | Actions | <my script>, and Start in Acrobat XI Pro.
I would like to be able to execute the same action using VBA in PowerPoint. Is this action considered a "menu item" in Acrobat? If so then I understand I can use AcroApp.MenuItemExecute to execute a menu item. What "menu item name" should I use? If not, is there another way to execute the same action using VBA in PowerPoint?
Thanks.
Regards,
John

No, it isn't a menu item. This area is a little complex, but it's the things which are, or which used to be on the menu. I don't think that there is a way to automate running actions, and I think this is entirely deliberate. However, there is an interface to execute JavaScript code, which is described in the Acrobat SDK.

I used to be able to see a preview of my scan which i can no longer see only the adobe acrobat symbol I am using Adobe pro 9 can this be changed??

I used to be able to see a preview of my scan which i can no longer see only the adobe acrobat symbol I am using Adobe pro 9 can this be changed??

Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
Then, drag the address panel up to wherever you want it.
You may also want to add it to the New Message window in the same way.

What levels of Acrobat are needed to use forms created in Acrobat Pro 9?

What levels of Acrobat are needed to use forms created in Acrobat Pro 9? I want to use my form as a job ticket but want to know what levels of adobe reader are needed for the end users to be able to fill out & submit the forms without any problems.

Reader 7 and higher should be able to fill out forms and submit if the pdf format allows Reader 7 to fill out the form. However, without problems is a different issue. Submission of forms via email is ALWAYS a problem. It is always better to post the form on a website and have the form filled out on the web and have the data stored or sent to a database for further action.

Does a client need Acrobat 9 Pro, to use a form created with the program?

Do you need to have Adobe Acrobat 9 Pro, in order to use and/or view forms and portfolios created with Adobe Acrobat 9 Pro?
If so, is there a free version that I can direct clients to download, so that they will be able to use and or view documents I am creating with Acrobat 9 Pro?

Will the user be able to save the form with the data he/she entered?
That depends upon if the file is specially Reader enabled. For some forms Acrobat Standard or higher is needed to file and save form data.

Deployment of Acrobat 7.0 Pro using Zenworks on users with user only privileges

Similar Messages

Maybe you are looking for