Deployment of Application on mobile client failing.

HI,
I have created a simple webdynpro application and uploaded it to the DOE via SDOE upload archive transaction. Created MCD then assigned it to my devices.After synchronizing from my client i am getting message as 'Error in installation' and on client trace i can see the message as 'deployment failed, unrecoverable error'. In the SDA file-> mcd.xml file i cannot see mbo_name,dependency,trans_guid etc.
could it be a problem?
Appreciate your help!!
Thanks & Regards
Devendra

Hi Nipun,
I have used Mobile Application for Laptops.
I can see the following error message in NWA.
DOE KEYMAP_SERVICE_AV Invalid Task. Node DEPLOYMENT_STATUS.
Do you have any idea about this?
Regards
Devendra

Similar Messages

Software Center Application Uninstallation Button Greyed Out and Deploying an Application with Uninstall switch Fails

Hi,
I tried everything I could find on the internet but no luck so far. I can successfully deploy MS Visio 2013 to the clients. I also want to be able to uninstall it from the clients. On the client machine Uninstall button is greyed out. This deployment is
installed as "Available" and there is only one deployment type within that MS Visio 2013 Application.
I tried the following uninstall commands in my deployment:
setup.exe /uninstall
setup.exe /uninstall
VisPro
/config .\vispro.ww\uninstallvisio.xml
“\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe” /uninstall VisPro /config "\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml"
\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe /uninstall VisPro /config \\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml
I checked Product ID from Setup.xml and I know it is correct. My uninstallvisio.xml' content is below:
<Configuration Product="VisPro">
<Display Level="basic" CompletionNotice="yes" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="SETUP_REBOOT" Value="Never" />
</Configuration>
Last night, I downloaded and installed Cumulative Update 1 for SCCM 2012 R2 and I haven't tried the deployment after the update,yet. I will try it today but please let me know what else to check.
Yavuz Selim Atmaca

After I updated SCCM Server and test client pc with CU1 , I tried to deploy visio as Required. It installed successfully. Then I uninstalled visio by deploying the application with Uninstall Action.
After that I tried to deploy visio as "Available" to see if Software Center Uninstall button works. However visio deployment does not come to Software Center's Available Applications List. I check the status of the deployment under the Deployments monitoring
node and it says Success "Already Compliant". I dont know what it means. Does config manager thinks that visio already installed?
Yavuz Selim Atmaca
2 or 3 hours later that -Succes "Already Compliant"- status of the deployment under the Deployments monitoring node is vanished automatically and Software Center application list showed the new deployment. I installed it and uninstalled it succesfully.
So, you are right Solution is the CU1 but I am still wondering why my available deployment took so time to be visible in Software Center althought I didn't enter any schedule to be available.
Yavuz Selim Atmaca

Cisco Anyconnect Secure Mobility Client Fails to Install

I've followed and contributed to posts about this problem here: https://supportforums.cisco.com/thread/2057631
But this problem isn't only isolated to 2.5 client, so I thought a new discussion might attract a bit more attention and feedback.
For 5 or 6 users when I try to install the client as new as version 3.0.11042 (any version, not just the newest) I get a failure:
CustomAction VACon64_Install returned actual error code -536870348 (note this may not be 100% accurate if translation happened inside sandbox)
Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action VACon64_Install, location: C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\VACon64.exe, command: -install "C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\\vpnva64.inf" VPNVA
MSI (s) (44:94) [16:15:05:629]: Product: Cisco AnyConnect VPN Client -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action VACon64_Install, location: C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\VACon64.exe, command: -install "C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\\vpnva64.inf" VPNVA
Before it rolls back, I try to run the command manually which appears to do something, but doesn't fix the problem.
This is the step that is trying to install the service VPNVA, but it fails.
I have cleaned up all the files I know how (which registry entries might I also try?) and rebooted several times, but no luck.
The documented Cisco solution, and what i've been telling frustrated users one after another is "re-image your machine"
Does someone have an idea of what else I can try?

Thank you.
The workaround works. Yes, using Windows 8.1.
An HOW TO on how to set this for everyone who is not that computer savvy...
1. Go to the Start Screen of Windows 8.1 and look for the Cisco Anyconnect Secure Mobility Client icon (or just type it on the Start Screen).
2. Right click the icon and select 'Open file location'.
3. Right click the Cisco Anyconnect Secure Mobility Client (Shortcut) and select 'Properties'
4. Select the 'Compatibility' Tab.
5. Check the box 'Run this program in compatibility mode for:' and select 'Windows 8' in the drop down.
6. Click 'OK' to close the window.
7. Log off and log on again (or reboot the computer).
Note to point 5. If there are multiple users are using the PC with different user accounts and they're using the Cisco Secure Mobility Client as well, then go to 'Change settings for all users' and there apply point 5. To do so you'll need administrative rights to the computer though.

Lync2010 Mobile client, fail to sign out

Hi,
Has anyone seen this type of issue before ?
Lync2010 Mobile client on IPAD and iPhone push notifications are working, can sign in to client, -- however most times when i sign out- my presence is still showing.
has anyone seen this type of issue before with lync2010 mobile on Iphone/Ipad. User logs in , sign out but presence is still showing as available.
Thank you,

Hi,
Did the issue happen only for you or for multiple users?
Did the issue also happen for Android or Windows Phones?
Please update to the latest version for Lync client on IPAD and iPhone and test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Deploying jdeveloper application to apps server fails

I'm trying to deploy application from jdeveloper to apps server 10.1.2.02
connection to apps server is successful. but deployment fails with foll error
---- Deployment started. ---- Sep 10, 2007 4:51:49 PM
Target platform is Standard J2EE.
Wrote EJB JAR file to D:\Program\JDeveloper\jdev\mywork\HDFCCustWeb\website\deploy\ejb1.jar
Elapsed time for deployment: 1 second
---- Deployment finished. ---- Sep 10, 2007 4:51:50 PM
---- Deployment started. ---- Sep 10, 2007 4:54:37 PM
Target platform is Oracle Application Server 10g 10.1.2 (Windows) (howsora9).
Wrote EJB JAR file to D:\Program\JDeveloper\jdev\mywork\HDFCCustWeb\website\deploy\ejb1.jar
Wrote EAR file to D:\Program\JDeveloper\jdev\mywork\HDFCCustWeb\website\deploy\ejb1.ear
Invoking DCM servlet client...
D:\Program\JDeveloper\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar D:\Program\JDeveloper\jdev\lib\oc4j_remote_deploy.jar http://howsora9:18100/Oc4jDcmServletAPI/ ias_admin **** redeploy G:\Oraappsr2 D:\Program\JDeveloper\jdev\mywork\HDFCCustWeb\website\deploy\ejb1.ear hdfccustweb
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy G:\Oraappsr2 D:\Program\JDeveloper\jdev\mywork\HDFCCustWeb\website\deploy\ejb1.ear hdfccustweb UNDEFINED
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = 0a0000b746b40e54065c96c04298b795b7b5e8caef3b
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=0a0000b746b40e54065c96c04298b795b7b5e8caef3b
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (-8)
#### HTTP return code was -8
Exit status of DCM servlet client: -8
Elapsed time for deployment: 13 seconds
#### Deployment incomplete. #### Sep 10, 2007 4:54:50 PM

Try deploying directly from the OAS EM Web interface - it might provide a more detailed error message.
If you are using JDev 10.1.3 my guess it might be that your deployment descriptor files are using J2EE 1.4 syntax instead of J2EE 1.3 syntax which is what OAS 10.1.2 expects.

Deploying Configuration Manager 2012 2R Client fails

I have installed a test SCCM 2012 R2 environment.
When I try to install SCCM client to machines by using the push installation method it fails. I have read several threads but the problem still exists.
- Application Catalog web service point
- Application Catalog website point
- Component server
- Fallback status point
- Management point
- Site database server
- Site server
- Site system
I have verified in the Site Settings that "Use a fallback site" is marked.
Connections between server and workstations are working correctly.
Here is the log file:
Any ideas?
5D7B5EFED927D6E5C8B22A82D976EF2F13096CBE21C887107445E21FDC2B500A36B2B5C523D56880EE221221F</Property><Property Name="AuthSenderMachine">W2K12;W2K12.test.com;</Property><Property Name="MPSiteCode">SCCCM1</Property></Hook></Hooks><Payload
Type="inline"/></Msg>']LOG]!><time="07:02:51.146-120" date="03-17-2014" component="ccmsetup" context="" type="0" thread="1960" file="httphelper.cpp:1724">
<![LOG[Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags=""><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="SCCCM1" MasterSiteCode="SCCCM1"
SiteLocality="FALLBACK" IISPreferedPort="" IISSSLPreferedPort=""/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="SCCCM100002" FullPackageVersion="2" FullPackageHash="BFC11E099E8F451107B43E0DBEFD93B01DB2D6453DA74F8A2CB94B73D676C1CD"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30357988;2667639552" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>']LOG]!><time="07:02:51.146-120"
date="03-17-2014" component="ccmsetup" context="" type="0" thread="1960" file="siteinfo.cpp:221">
<![LOG[Failed to get DP locations as the expected version from MP 'W2K12.test.com'. Error 0x87d00215]LOG]!><time="07:02:51.177-120" date="03-17-2014" component="ccmsetup" context="" type="2"
thread="1960" file="ccmsetup.cpp:11261">
<![LOG[Sending Fallback Status Point message to 'W2K12', STATEID='101'.]LOG]!><time="07:02:51.177-120" date="03-17-2014" component="ccmsetup" context="" type="1" thread="1960" file="ccmsetup.cpp:9756">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x8004100e]LOG]!><time="07:02:51.177-120" date="03-17-2014" component="ccmsetup" context="" type="2" thread="1960"
file="ccmsetup.cpp:9838">
<![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="07:02:51.177-120" date="03-17-2014" component="ccmsetup" context="" type="0" thread="1960" file="ccmsetup.cpp:9887">
<![LOG[State message with TopicType 800 and TopicId {65AD345C-60B6-48B9-999F-021939BF8E1B} has been sent to the FSP]LOG]!><time="07:02:51.177-120" date="03-17-2014" component="FSPStateMessage" context="" type="1"
thread="1960" file="fsputillib.cpp:752">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="07:02:51.177-120" date="03-17-2014" component="ccmsetup" context="" type="0" thread="1960" file="ccmsetup.cpp:8835">

Is the ConfigMgr client distributed to 100% of all targeted distribution points? Have you created boundaries, added them to a boundary group and assigned a DP?
Torsten Meringer | http://www.mssccmfaq.de
A boundary group hasn't been assigned to a DP.
Thank you very much!

Error 500 while running the application on Mobile Client

Hi all,
I have made a smart sync project using the XML file of SYNCBo's.
When I synchronize in my MI client,the application name is appearing on the homepage.
But when i click on the application I get the following error trace::
Error: 500
Location: /MIAPP2/start
Internal Servlet Error:
java.lang.NullPointerException
     at com.sap.ip.me.smartsync.data.RowManager$1.elementCount(RowManager.java:115)
     at com.sap.ip.me.smartsync.data.SyncBoCollectionImpl.(SyncBoCollectionImpl.java:27)
     at com.sap.ip.me.smartsync.data.SyncBoDataFacadeImpl.getSyncBos(SyncBoDataFacadeImpl.java:129)
     at miProjectPackage.dataaccess.SmartSyncDBAccess.getRowInstances(SmartSyncDBAccess.java:94)
     at miProjectPackage.dataaccess.TableContentProvider.getTableWithSyncBoNames(TableContentProvider.java:83)
     at miProjectPackage.MiProjectClass.showSyncBoNames(MiProjectClass.java:236)
     at miProjectPackage.MiProjectClass.doHandleEvent(MiProjectClass.java:71)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doGetNotThreadSafe(AbstractMEHttpServlet.java:347)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doGet(AbstractMEHttpServlet.java:689)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.service(AbstractMEHttpServlet.java:313)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
     at java.lang.Thread.run(Thread.java:534)
Im new to MI .Can anybody suggest where am i wrong?
Juhi..

Dear Juhi,
The "app name" thing is what I tried telling you yesterday. I advice you to reset the client data from settings link in client, sync a couple of times, check the status of the undeployed app in the Web Console / NWA, and if problem persists, remove assignment of the new app, sync couple of times, and then add app again.
By the way, have you got the name thing right? See the Application name, not the project name should be the same with the name of the war/sda file and the app/component name in the j2ee engine. I had wanted you to see the following text in your NWDS help - > SAP Net. Dev. Studio Doc.->MI Dev./MDK ->Go and create ->First Example JSP:
The class SystemInfo extends AbstractMEHttpServlet which extends javax.servlet.http.HttpServlet itself. The method doHandleEvent does:
Implemented Classes in the Servlet for the Example
We create a class SystemInfo that extends the class AbstractMEHttpServlet and implements Constants. Constants is an interface in which we define all relevant variables for the application. All variables used in Constants are written in uppercase characters. So anytime you see an uppercase variable used in class SystemInfo you will find the definition in interface Constants.
The class SystemInfo extends AbstractMEHttpServlet which extends javax.servlet.http.HttpServlet itself. The method doHandleEvent does:
public String getApplicationName()
This method has to be overwritten. It returns the name of the MI client application. The name specified here has to be the same used for the WAR file name and the name of the application specified in the MI Webconsole.
Regards,
Veera

Deploying Oracle Applications over mobile phones

Hallo!I am an Oracle Newbie studying for the Oracle 10g Administration course.
I am just curious.If one wanted end users to access Oracle Applications e.g E-Business Suite,Discoverer,Siebel etc over mobile phones such that Oracle Forms and Reports could be loaded over a mobile phone,what would this entail?
What kind of configurations would need to be done on the Application Servers plus on the mobile phones themselves to realize this?Will you need J2ME plus other s/w to do this?
Please give me a very brief overview as to the applications needed and configurations to be done to achieve this.
Thanks.

1) >>>>I ftp-d my rdf file to the default demo directory
"OraHome1/j2ee/OC4J_Demos/applications/reportsDemo/web/examples/Tools/emp.rdf"
<<<<<
The name of the file is "emp.rdf" and you are giving request for "employees.rdf".
The important thing is the location of file should be in env variable "REPORTS_PATH"
( to be set in $OH\bin\reports.sh)
Thanks
The Oracle Reports Team

How to debug a Mobile client application

Hi,
How to debug a mobile client application on the laptop, where we dont have any .NET 2003 application installed. (not an MDW)
If we get any error on the application, which could be a UI error on laptop, and if everything is working fine on the MDW, is there any way to debug the application on Mobile client?
Also, please provide me links or tips on how to debug the mobile application, on MDW as well.
Regards,
Praveen.

Hi,
to be able to debug on a local machine you would need at least to install the UI/BOL class files and the project files and make some local settings.
But anyway on all clients there should be the same MSA installation like it is on the MDW so in case of an issue it is normally caused by local (inconsistent) data.
I would suggest to access the laptop IDES database by changing your MDW odbc settings and perform the debug session on the MDW.
Debugging in VB .net is similar to VB6 but you have to notice that changing of the code is NOT possible when being in debug mode.
Regards,
Wolfhard

ADF Mobile Client : Error while trying to import javax.microedition.*

Hi,
JDev throws errors at compile time when I try to deploy a sample ADF Mobile Client application.
These errors are related to javax.microedition.io.* imports.
Error(11,29): package javax.microedition.io does not exist
Error(12,29): package javax.microedition.io does not exist
Error(180,9): cannot find class HttpConnection
Error(191,27): cannot find class HttpConnection
Error(191,42): cannot find variable Connector
Error(250,49): inconvertible types
Error(303,40): cannot find variable HttpConnection
Any pointers as to how these errors could be resolved?
Is there a JDev Wireless extension that should be installed to resolve these J2ME related errors?
For JDev 10g, I could locate one such extension called JWE here : http://www.oracle.com/technology/products/iaswe/archive/developer/index.html
I could not find any similar extension for JDeveloper 11.1.3.
Regards,
Prasad.

Hi, just want to make sure - did you install the ADF MObile Client extension yet? Please go to JDev-Help-Check for Updates-Official Oracle Extensions and Updates, and find Oracle ADF MObile Client Extension in the list. Check it, download it, and then restart JDev. Sounds like the extension was not installed, so it's not able to load any J2ME libraries.
If you have downloaded the extension already, please go to project properties-libraries and classpath, and then see if the sample app is referencing some third party libraries, for example something from RIM. If so, please double check the path to the library.
Once you installed the extension, you can also access the ADF Mobile Client developer guide - it contains all the documentation around what you need to install first. Please take a look and see what you need to install - at a minimum, you need to install BlackBerry JDE if you want to deploy to BlackBerry, and Windows Mobile Emulator if you want to test the app on Windows Mobile. Lastly, if you need to synchronize data, then you also need Oracle Database Lite MObile Server installation.
Thanks,
Joe Huang

Additional software manages deployment of applications

I'd like to utilize "Additional software manages deployment of applications" option in Client Settings (using SCCM 2012 R2).
Need to write a SDK to manually kick off the deployment for certain collections with a 24/7 business hour and zero maintenance window.
Anyone has ideas or if a class is available to do this? I need the ability to start the deployment on individual machine one by one and not entire collection.

Hi, katiedonut.
If your intent is to immediately start a deployment then the 3rd party deployment facility activated by that setting may not be appropriate as it is basically an entire replacement of the whole Application/Updates facility within the client.
That seems a bit heavyweight for what you're trying to do.
You may be better served by having a scheduled task or listener service that runs on the client that can invoke the installation methods in the root\ccm\clientsdk classes (these are also what Software Center uses) if you have a time sensitive need to
run something right away.
If you do need to go the native 3rd party client route that the "Additional software" setting enables you'll need to work with an account manager or CSS as we don't publish this on MSDN.
Let me know if you have any more questions.
Check out my Configuration Manager blog at http://aka.ms/ameltzer

JBO-27122 error in ADF mobile client application for blackberry

Hi,
I am trying to develop a simple ADF mobile client application for blackberry. Currently, working only with Blackberry 9700 simulator. I am using the following for development:
- Jdev 11.1.1.3
- Oracle database lite 10.3.3
I have done all the steps as given in the oracle demo. But when I try to run the application in blackberry simulator, the page shows the following error:
ERROR: failed to change page
oracle.jbo.server.DBTransactionImpl.createPreparedStatement: JBO-27122: SQL error during statement preparation. Statement: select po_header_id from po_headers_all where po_header_id=1
[oracle.jbo.server.DBTransactionImpl.createPreparedStatement] Encountered exception executing query on ViewObject: header1
[oracle.jbo.server.DBTransactionImpl.createPreparedStatement] Error retrieving BindingContainer : 'mobile_twoPageDef'
oracle.adfnmc.java.sql.SQLException:
oracle.adfnmc.java.sql.SQLException:net.rim.device.api.database.DatabaseException: select po_header_id from po_headers_all where po_header_id=1 : SQL logic error or missing database
Unable to create/prepare native statement with SQL select po_header_id from po_headers_all from po_header_id=1
Unable to create PreparedStatement with SQL select po_header_id from po_headers_all from po_header_id=1
Please suggest what could have been wrong while developing or deploying the application.
P.S. : The view object (header) shows data successfully when run in the application module. Also, a .db file gets created in the SD card folder. The synchronisation is a success when mSync.exe file is run in the <Oracle_Home>/Mobile/Server/Sdk/bin.

Sorry my content got repeated.
you can go through this thread FOD mobile db sync with base adf server db not working
there is link that you can follow for synchronization (check second last message)
Edited by: Nikhil Gokhale on Apr 17, 2011 3:55 AM

Deploy to Application Server Failed on a distributed environment

Hi All,
I am trying to configure new Hyperion verion 11.1.2.2 on distributed environment but during configuring calculation manager to application server failed and getting error message like "Deploy to Application Server Failed". I am not sure what is issue and how to fix it. I have tried to read log files but I am not able to undersantd where to look and debug this issue.
My Hyperion Environment over view as a below:-
1- I have used Microsoft VMWARE to build my Hyperion Enviornment
2- I have created 1 window server 2003 domain and made 4 clients of that domain. (All these systems have windows server 2003 installed). I have given name to each client server i.e. System A, System B, System C, System D
3- I have installed SQL 2005 and created databases for all Hyperion components i.e. Shared services, calculation manager, epma on a system A
5- I have installed and configured foundation services and weblogic server on a system B. (In this system I have installed and configured shared services, weblogic, workspace, and able to deploye application server on a same system)
6- On a system A I am able to complete installation for hyperion Performance Management Architect and Calculation Manager and able to finish all type of configuration for these two components but as soon as system trying to configure any related to APPLICATION SERVER services it fails to configure. On a configuration summary page system shows everything is configured but APPLICATION SERVER says FAILED wrtten on a red color letters.
I have explored log files and found that Calculation Manager application server failed to deploy or Deploy to Application server failed.....
Since, I am not sure where to look and how to debug this issue I am requesting to all hyperion friends to help and guide me to debug as I have been trying to install this product since last friday and still no out put....
I will be really thankful if someone share his or her wisdom to help me....
Thank you to all in Advance.....
Thanks,
Safi

Did you install all the WebLogic web applications on the foundation machine as well as the machine they are going to be deployed to.
"On the machine on which you plan to administer the WebLogic Server, you must install all Web applications for all applications you plan to deploy on any machine in the environment. (The WebLogic Administration Server is installed and deployed on the Foundation Services machine.)"
Cheers
John
http://john-goodwin.blogspot.com/

Jax-ws deployed in standalone client fails with nullpointerexception

I have a project which has deployed successfully as a standalone client with deployed jar files wlfullclient.jar, etc. When I add the jax-ws functions that I require, the deployed client fails with a nullpointerexception that is generated from the constructor of the Service class. The project runs successfully within the JDeveloper 11.1.1.5 environment and on a weblogic 10.3 server platform, but fails when I deploy as a standalone client with the wlfullclient.jar. I'm using JDK 1.6.0_24. In testing, the error occurs when I replace the {WLHome}\server\lib\weblogic.jar entry in the classpath with the wlfullclient.jar.
I tested from another angle by creating my jax-ws functions in a standalone deployment, and it works successfully communicates with the webservices. No additional entries on the classpath besides my deployed jar. I then added to my deployment a simple JMS context lookup:
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY, contextFactoryProvider);
ht.put(Context.PROVIDER_URL, urlString);
Context context = new InitialContext(ht);
This test runs without error in the JDeveloper environment. As soon as I add the wlfullclient.jar in the standalone environment, I get the following exception:
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/xml/ws/spi/ProviderImpl
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:630)
at java.lang.ClassLoader.defineClass(ClassLoader.java:614)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
at java.net.URLClassLoader.access$000(URLClassLoader.java:58)
at java.net.URLClassLoader$1.run(URLClassLoader.java:197)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
at javax.xml.ws.spi.FactoryFinder.safeLoadClass(FactoryFinder.java:150)
at javax.xml.ws.spi.FactoryFinder.newInstance(FactoryFinder.java:30)
at javax.xml.ws.spi.FactoryFinder.find(FactoryFinder.java:90)
at javax.xml.ws.spi.Provider.provider(Provider.java:83)
at javax.xml.ws.Service.<init>(Service.java:56)
Interestingly, there is a class com/sun/xml/internal/ws.spi/ProviderImpl in the {JAVA_HOME}/jre/lib/rt.jar file, and I suppose this is what is used by the jax-ws classes when the wlfullclient.jar is not present on the classpath.
So, what is it that I am missing in how to get the jax-ws classes and the jms classes to work in the standalone deployment environment (outside of the JDeveloper environment).
Edited by: user3653687 on Jan 9, 2012 1:38 PM
Edited by: user3653687 on Jan 9, 2012 2:49 PM

Here is how I solved this problem to execute the application from a jar file (using Oracle Fusion Middleware 11.1.1.5.0 distribution). The key seems to be to extract the contents of the wseeclient.zip file into the same directory as the wlfullclient.jar and ws.api_1.1.0.0.jar files and then ensure that these 2 jars are on the classpath.
In JDeveloper, create a project that has the jms/jax-ws classes.
Put the following text entries to form the classpath (along with other dependent jars, e.g. org.eclipse.persistence...) into a file which will be included in the manifest for the client jar. Be sure to separate entries with a space.
lib/wlfullclient.jar lib/wseeclient.jar lib\ws.api_1.1.0.0.jar lib\org.eclipse.persistence_1.1.0.0_2-1.jar
In the Edit Deployment Profile Properties, select Include Manifest File, specify the main class to execute, and Add the classpath file to be included in the manifest.
Deploy the jar file.
In a deployment area, create the directory that will contain all the classpath jars (e.g. ./lib).
Within the directory ./lib, extract all files from wseeclient.zip (found in {weblogic home}/server/lib)
Copy wlfullclient.jar into the directory ./lib from the {weblogic home}/server/lib
Copy ws.api_1.1.0.0.jar into the directory ./lib from {oracle middleware home}modules
Copy org.eclipse.persistence_1.1.0.0_2-1.jar (for jaxb support) itno the directory ./lib from {oracle middleware home}/modules
Copy the deployed client jar to the deployment area and execute, e.g.:
java -jar ClientTest.jar myArguments

Install anyconnect secure mobility client 3.1 failed on Mac 10.8.2

Hi guys
I tried to install cisco anyconnect secure mobility client 3.1 on my Mac laptop, the OS version is 10.8.2,
though above error occured, the client app canbe found at /Applications/Cisco , but I cannot use it to connect to my VPN network.

Attached the install logs , hope it's helpful
Mar 5 23:21:07 localhost Installer[1345]: Cisco AnyConnect VPN Client 3.1.02026 Installation Log
Mar 5 23:21:07 localhost Installer[1345]: Opened from: /Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg
Mar 5 23:21:07 localhost Installer[1345]: Product archive /Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg trustLevel=202
Mar 5 23:21:12 localhost Installer[1345]: InstallerStatusNotifications plugin loaded
Mar 5 23:21:15 localhost Installer[1345]: ================================================================================
Mar 5 23:21:15 localhost Installer[1345]: User picked Standard Install
Mar 5 23:21:15 localhost Installer[1345]: Choices selected for installation:
Mar 5 23:21:15 localhost Installer[1345]:           Install: "Cisco AnyConnect VPN Client"
Mar 5 23:21:15 localhost Installer[1345]:           Install: "(null)"
Mar 5 23:21:15 localhost Installer[1345]:                     cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg : com.cisco.pkg.anyconnect.vpn : 3.1.02026
Mar 5 23:21:15 localhost Installer[1345]:                     cisco_anyconnect-3.1.02026.pkg#anyconnect_config.pkg : com.oracle.CiscoAnyConnectVPNClientConfig : 3.1.02026
Mar 5 23:21:15 localhost Installer[1345]: ================================================================================
Mar 5 23:21:15 localhost Installer[1345]: It took 0.00 seconds to summarize the package selections.
Mar 5 23:21:15 localhost Installer[1345]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Mar 5 23:21:15 localhost Installer[1345]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg
Mar 5 23:21:15 localhost Installer[1345]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#anyconnect_config.pkg
Mar 5 23:21:15 localhost Installer[1345]: Set authorization level to root for session
Mar 5 23:21:19 localhost runner[1348]: Administrator authorization granted.
Mar 5 23:21:19 localhost Installer[1345]: Will use PK session
Mar 5 23:21:19 localhost Installer[1345]: Starting installation:
Mar 5 23:21:19 localhost Installer[1345]: Configuring volume "Macintosh HD"
Mar 5 23:21:19 localhost Installer[1345]: Preparing disk for local booted install.
Mar 5 23:21:19 localhost Installer[1345]: Free space on "Macintosh HD": 388.55 GB (388547031040 bytes).
Mar 5 23:21:19 localhost Installer[1345]: Create temporary directory "/var/folders/0y/kj2nvp7j4yq_sy9m3cxn52wr0000gn/T//Install.1345Wuq5ze"
Mar 5 23:21:19 localhost Installer[1345]: IFPKInstallElement (2 packages)
Mar 5 23:21:19 localhost Installer[1345]: Using authorization level of root for IFPKInstallElement
Mar 5 23:21:19 localhost installd[345]: PackageKit: ----- Begin install -----
Mar 5 23:21:19 localhost installd[345]: PackageKit: request=PKInstallRequest <2 packages, destination=/>
Mar 5 23:21:19 localhost installd[345]: PackageKit: packages=(
    "PKLeopardPackage ",
    "PKLeopardPackage "
Mar 5 23:21:19 localhost installd[345]: PackageKit: Extracting file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandboxManager/1.sandbox/Root, uid=0)
Mar 5 23:21:20 localhost installd[345]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandboxManager/1.sandbox/Root
Mar 5 23:21:34 localhost installd[345]: PackageKit: prevent user idle system sleep
Mar 5 23:21:34 localhost installd[345]: PackageKit: suspending backupd
Mar 5 23:21:34 localhost installd[345]: PackageKit: Executing script "./preinstall" in /private/tmp/PKInstallSandbox.sjtRin/Scripts/com.cisco.pkg.anyconnect.vpn.yM72U9
Mar 5 23:21:34 localhost install_monitor[1359]: Temporarily excluding: /Applications, /Library, /System, /bin, /private, /sbin, /usr
Mar 5 23:21:34 localhost installd[345]: PackageKit: Shoving /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandboxManager/1.sandbox/Root (4 items) to /
Mar 5 23:21:34 localhost installd[345]: PackageKit: kextcache -system-caches
Mar 5 23:21:36 localhost installd[345]: PackageKit: kextcache -update-volume / -Installer
Mar 5 23:21:52 localhost installd[345]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.sjtRin/Scripts/com.cisco.pkg.anyconnect.vpn.yM72U9
Mar 5 23:21:52 localhost installd[345]: ./postinstall: Setting ownership and permissions on installed files
Mar 5 23:21:52 localhost installd[345]: ./postinstall: Determining import locations
Mar 5 23:21:52 localhost installd[345]: ./postinstall: Installer package path: /Users/rioliu/Downloads
Mar 5 23:21:52 localhost installd[345]: ./postinstall: Installer volume path:
Mar 5 23:21:52 localhost installd[345]: ./postinstall: Installer DMG path:
Mar 5 23:21:52 localhost installd[345]: ./postinstall: nothing found to load
Mar 5 23:21:53 localhost install_monitor[1359]: Re-included: /Applications, /Library, /System, /bin, /private, /sbin, /usr
Mar 5 23:21:53 localhost installd[345]: PackageKit: releasing backupd
Mar 5 23:21:53 localhost installd[345]: PackageKit: allow user idle system sleep
Mar 5 23:21:53 localhost installd[345]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “cisco_anyconnect-3.1.02026.pkg”." UserInfo=0x7fcb0430e880 {NSFilePath=./postinstall, NSURL=file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg, PKInstallPackageIdentifier=com.cisco.pkg.anyconnect.vpn, NSLocalizedDescription=An error occurred while running scripts from the package “cisco_anyconnect-3.1.02026.pkg”.} {
    NSFilePath = "./postinstall";
    NSLocalizedDescription = "An error occurred while running scripts from the package \U201ccisco_anyconnect-3.1.02026.pkg\U201d.";
    NSURL = "file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg";
    PKInstallPackageIdentifier = "com.cisco.pkg.anyconnect.vpn";
Mar 5 23:21:53 localhost Installer[1345]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “cisco_anyconnect-3.1.02026.pkg”." UserInfo=0x7fa25caa4ba0 {NSFilePath=./postinstall, NSURL=file://localhost/Users/rioliu/Downloads/cisco_anyconnect-3.1.02026.pkg#vpn_module.pkg, PKInstallPackageIdentifier=com.cisco.pkg.anyconnect.vpn, NSLocalizedDescription=An error occurred while running scripts from the package “cisco_anyconnect-3.1.02026.pkg”.}
Mar 5 23:21:53 localhost Installer[1345]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Mar 5 23:21:53 localhost Installer[1345]: IFDInstallController 5CE28DD0 state = 7
Mar 5 23:21:53 localhost Installer[1345]: Displaying 'Install Failed' UI.
Mar 5 23:21:53 localhost Installer[1345]: 'Install Failed' UI displayed message:'The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.'.
Mar 5 23:37:53 localhost Installer[1557]: @(#)PROGRAM:Install PRO

Deployment of Application on mobile client failing.

Similar Messages

Maybe you are looking for