Deployment of KB2936068 update Rollups

Hi Team,
we have around 1000 server which are running in domain environment, I am doing patching of these servers via WSUS.
WSUS detected two RollUp Update KB2936068 , Now i am not sure whether I need to install these Rollup in our enviournment, Since lot of application is running in my environment , I am not sure what would be impact if i will install these Rollup
Updates
Can any one help me , How can i identify whether these rollups are necessary to install in my environment or not . what are pros and cons ? does this impact any way on internet explorer or any application.
Rollup Update Details:-
================
Cumulative Update for Internet Explorer 10 for Windows Server 2012
KB2936068)
Update Rollups
Cumulative Update for Internet Explorer 10 for Windows Server 2008 R2 Service Pack 1 for x64-based Systems
KB2936068)
Update Rollups
==================================================================================
Regards, Triyambak

Hi,
In this case, I recommend you create a test group, install this update and audit the status.
If there is no problem you can deploy it on more servers.
At last, to all the servers.

Similar Messages

Can I stop Update Rollups from downloading to WSUS?

Previous we had Update Rollups configured and now we'd like them gone. Originally the goal was to stop Silverlight but now we want all the Update Rollups to not be present in the WSUS server.
Here is what I tried based on results O found here via Google: I disabled the classification, ran the cleanup wizard, stopped Update Service, did a deletion of the WSUScontent contents, started the Update service, then did a wsusutil reset. The WSUSContent
folder was rebuilt over the weekend and now when I add the view for Update Rollups they are back again.
What did I do wrong?
Please let me know.
Thank you!

It sounds like you are saying once a product classification is synchronized, it is stuck in the WSUS database, and there is no option to prevent that classification from synchronizing in the future.
Is that accurate?
No, it's not accurate, and it's not what I said.
Once an update has been synchronized, it is synchronized. Synchronization is the act of getting NEW
updates from Microsoft. Your choices in Products and Classifications determines which
NEW updates you get from Microsoft.
So.. if you don't want to get any more NEW Update Rollups, you uncheck "Update Rollups" and you will get no more NEW Update Rollups. But the ones you already have aren't going anywhere.
If you don't want to get anymore NEW Windows Vista updates, then you uncheck "Windows Vista" and you will get no more NEW Windows Vista updates. But the ones you already have aren't going anywhere.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Easiest way to install update rollups for exchnage 2010

Dear Mates,
i have downloaded the update roll ups from RU 1 to RU 7 for my test environment exchange 2010 and i would like install all the update roll ups in all my exchange servers (8 No's). what is the easy method to install all the RU's in single command, or
batch file or from any scripts, instead of double click on each files (RU's)and giving next next next...etc....it should automatically install the RUS
Guide me , if there is any way to achieve this

Hi rush2ramki
Thank you for your question.
I agree with Andy.
Notice:
you can follow the order to update : Client Access server, Hub Transport server, Mailbox server
If you have multiple Active Directory sites and have deployed a Client Access server in the proxy sites that aren't Internet-facing, apply the update rollup to the Internet-facing Client Access servers before you apply the update rollup to the non-Internet-facing
Client Access servers.
You can refer to the following :
http://technet.microsoft.com/en-us/library/ff637979(v=exchg.141).aspx
If there are any questions, please let me know.
Best Regard,
Jim

SCOM 2012 SP1 Update Rollups

Hi All,
I am planning to deploy patches on SCOM server. We are on SCOM 2012 SP1 as of now. As you know Microsoft has been released UR1, UR2, UR3, UR4, UR5 and UR6 for SCOM 2012 SP1.
Do I need to deploy each UR one by one on SCOM server or UR6 will have all fixes?
If I go for directly UR6 then does this patch contains all fixes which are available till UR5?

http://blogs.technet.com/b/server-cloud/archive/2014/04/23/system-center-2012-sp1-ur6-and-system-center-2012-r2-ur2-now-available.aspx
Customers can now download the latest update rollups for both System Center 2012 SP1 and System
Center 2012 R2. Update rollups provide a cumulative package of fixes for each System Center component and are available from Microsoft Update. Alternatively, they can be manually downloaded from the Microsoft Update Catalog.

How install update rollup patch on Bulk agents?

Hi Experts,
I need to update UR5 on 8000+ agents. Do we have powershell cmdlet to install Update Rollup on Bulk agents?
Please suggest method to install UR5 patch bulk no. of agents.
Expecting your reply!!
Thanks in advance!
Regards
Karthick

For deploy agent using script, you can refer below link
http://www.systemcentercentral.com/opsmgr-2012-installing-opsmgr-2012-agents-from-the-command-line-sample-script/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Update rollup KB3000850

Hi,
Can somebody clarify what an Update Rollup is all about? And what is the difference with a service pack? This what I found on technet.
Service packs
Cumulative sets of all hotfixes, security updates, critical updates, and updates created since the release of the product. Service packs might also contain a limited number of customer-requested design changes or features.
Update rollups
Cumulative set of hotfixes, security updates, critical updates, and updates packaged together for easy deployment. A rollup generally targets a specific area, such as security, or a specific component, such as Internet Information Services (IIS).
At this moment, my assumption is:
-An update rollup contains only patches that are not published via WSUS (I checked the kb numbers in the Rollup and don't find these in our WSUS)
-A service pack contains all patches, so those published via WSUS and those in the rollups...
Is my assumption correct?
Is it recommended to install these update rollups or should we see this as optional updates?
Thanks

Hi,
Update rollup is an update package. It is smaller than Service Pack and generally Service Pack is for updating new features - SP will not release so frequently (Update Rollup generally will be released every several months).
Here is the description of "Update rollup":
Definition: A tested, cumulative set of hotfixes, security updates, critical updates, and updates that are packaged together for easy deployment. A rollup generally targets a specific area, such as security, or a component of a product, such as Internet
Information Services (IIS).
http://support.microsoft.com/kb/824684/en-us
Generally Hotfixes are specifically for fixing an issue, which is an optional patch. Every some time Microsoft will release an update rollup which contain some important updates and hotfixes which is confirmed that they can help resolve some common issues
occurs in the past time. So it is recommended to install Update Rollup for all computers.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

FYI Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413) Stops SCVMM service starting

I just applied update:
Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413)
and (KB2965414) but it failed to install.
After a reboot I could not login to the VMM and the service would not start
An event id 0 was reported with:
Service cannot be started. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
   at System.Reflection.RuntimeModule.GetTypes()
   at System.Reflection.Assembly.GetTypes()
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
   at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
   at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
   at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)
   at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
After I removed the update the VMM was able to start, no reboot required.
When I have time I will try to apply both updates again successfully and see if the issue still occurs.
Vista Ultimate Dell XPS M1330

FYI. I've had the same issue after I installed Update Rollup 3 (KB2965413), seeing the exact same error on event log. Tried to start the service manually, getting service unable to start error. This is a machine running
with Windows Server 2012 Standard. Solution for me is simple. I just install
KB2965414 (Update Rollup 3 for SCVMM 2012 R2), reboot the server, and the SCVMM service auto start up by itself.

Issue with Update Rollup 5 for Exchange 2010 SP3 - Mailboxes that were auto mapped not working

Below is my response in another thread but creating a new one in the hopes that someone has the same issue and a solution besides mine below.
Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

Not sure why it was suggested to use the auto mapping feature to grant permissions because that is the component that is causing the issue. Also, there is nothing wrong with the auto configuration because the user can access their own mailbox just fine and
also select mailboxes in their Outlook that were NOT auto mapped.
With that said, here is how I fixed them all.
Remove the permissions using the Exchange Console. Don't forget Send As
Wait about 15 minutes. The mailbox should disappear from the users Outlook
Open an Exchange PowerShell window and run the following command:
.\add-mailboxpermissionsnoautomap.ps1 -Identity mailbox -User user -AccessRights FullAccess
Have the user add the mailbox to their Outlook using the manual process.
All is well....
If you don't have the PS script add-mailboxpermissionsnoautomap.ps1, you can download it. I stumbled across it a few years ago and use it all the time. If you can't find it, just use the Exchange built in command for adding mailbox folder permissions but
specify automap $false.
The idea here is to grant the user access without auto mapping.

Error installing DPM Agent in Update Rollup 5 for System Center 2012 R2 Data Protection Manager

I have updated my main DPM server to Update Rollup 5 for System Center 2012 R2 Data Protection Manager and all went well.
All Protected servers updated and rebooted and continued protection - EXCEPT one;
Physical Windows Server 2012 R2 Datacenter.
Tried Manual install - no luck
Removed Protection Agent / rebooted / re-installed - no luck
Installed all updates / re-install - no luck
this seems to be the only indicated problem in MSDPMAgentInstall.LOG.....
Property(S): PATCHMediaSrcProp = C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\RA\4.2.1292.0\DPMProtectionAgent_KB3021791.msp
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3021791' could not be installed. Error code 1603. Additional information is available in
the log file C:\Windows\\Temp\MSDPMAgentInstall.LOG.
MSI (s) (04:34) [09:24:23:772]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft System
Center 2012 R2 DPM Protection Agent Update - KB3021791. Installation success or error status: 1603.
MSI (s) (04:34) [09:24:23:772]: Note: 1: 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent -- Configuration failed.
MSI (s) (04:34) [09:24:23:772]: Windows Installer reconfigured the product. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success
or error status: 1603.
Any help would be greatly appreciated.

Hotfix for known issue with Update Rollup 5 for System Center 2012 R2 Data Protection Manager
http://www.microsoft.com/en-us/download/details.aspx?id=45914&WT.mc_id=rss_alldownloads_all
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points

Install or not install - exchange 2010 update rollup 4 sp3

Hi guys!
We have Exchange2010 SP3 with update rollup 2.
Users with IE11 are having problems with OWA opening only in light mode. I have read on the internet that CU 4 solves this problem but on the other hand this CU makes additional problems with outlook 2007 clients.
Some of the comments of this issues from other companies are: In Outlook 2007 if you choose to change the current view with Arrange By 'Categories' the following is noticed: - Items that you set unread or read are not changed until you refresh the view
- If you open an unread email by doubleclicking, it's status stays unread until you refresh the view. - New mail items are not automatically seen until refresh. This is a very annoying issue, and our servicedesk already received a lot of calls for this issue
Is there any workaround to fix IE11 OWA light mode and not corrupt Outlook 2007 user clients?
bostjanc

It happens as MSIE token is removed from the user-agent string in IE11. This made the Exchange team provide an update on the Exchange side to fix this issue. The workaround is to use Compatibility Mode in IE11 for OWA. As for the fixes:
2003: Use workaround, no fix will be released
2007: Use workaround until a fix is released, currently a fix is tentatively planned for release in E2007 SP3 RU12
2010: Install
E2010 SP3 RU3 or use workaround
2013: Install
E2013 CU3 or use workaround
O365: Issue is already fixed, no action is required
Thanks,
Jason
Jason Apt, Microsoft Certified Master | Exchange 2010
My Blog

Exchange 2010 SP3 Update Rollup 6 breaks first OWA login (timezone selection) on SBS 2011

The Exchange 2010 SP3 Update Rollup 6 broke the OWA for Users who access OWA for the first time and have to set a timezone. They get this error:
Request
Url: https://xxxxx:443/owa/languageselection.aspx
User: xxxxxx
EX Address: /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=xxxxx
SMTP Address: xxxxxx
OWA version: 14.3.195.1
Exception
Exception type: System.ArgumentNullException
Exception message: Value cannot be null. Parameter name: value
Call stack
Microsoft.Exchange.Clients.Owa.Core.Utilities.RenderDirectionEnhancedValue(TextWriter output, String value, Boolean isRtl)
Microsoft.Exchange.Clients.Owa.Core.LanguageSelection.RenderTimeZoneSelection()
ASP.languageselection_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer)
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
System.Web.UI.Page.Render(HtmlTextWriter writer)
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
This Server is an SBS2011.
The update broke nothing on a "normal" 2008R2 with exchange 2010.
Uninstalling RU6 helped but thats obviously not the desired way.
Removing the RenderTimeZoneSelection() call from languageselection.aspx obviously helped but then there is no timezone dropdown displayed anymore. The timezone dropdown is working normaly in other places like ecp. Afaik this error occours only in the languageselection.aspx
file which is displayed for "new" OWA users. (Users without a timezone set)
my workaround was to set the language and timezone for these mailboxes via exchange shell.

Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

DPM 2012 R2 Rollup 4, Update Rollup 7 for Exchange Server 2010 SP3 backups with eseutil check fail

Hi,
It could be a coincidence, but ever since installing Update rollup 4 onto DPM 2012 R2, (which was at UR3 I believe) I haven't been able to complete an Exchange express full backup or consistency check with verification using Eseutil checked. If I have the
eseutil check enabled I get the following error:
Type: Consistency check
Status: Failed
Description: Data consistency verification check failed for LOGS of Exchange Mailbox Database Mailbox Database 2011112513 on SERVER.xxx. (ID 30146 Details: The process cannot access the file because it is being used by another process (0x80070020))
Disabling the eseutil verification allows it to succeed, but I'm not happy to continue with that for too long.
I've had this running for many years and this is the first real issue with exchange, its a single stand alone exchange database.
Any ideas?
Thanks,
Andreas

Andreas,
the error is stating that something else has a handle to a file or files during the ESEUtil check. Typically this is AV. I have also seen where the Exchange limits are exceeded and that causes the issue.
Please ensure you have the DPM AV exclusions for the DPM server and I would advise the DPMRA.exe on the PS. You can also trying disabling or removing AV as a test.
DPM AV exclusions -
http://technet.microsoft.com/en-us/library/hh757911.aspx
You may also want to test using eseutil against the logs outside DPM and see if that fails with similar issue. Let us know. Thanks
Regards, A.Nadar, This posting is provided "AS IS" with no warranties, and confers no rights.

Exchange 2010 SP1 Update Rollup 6 to Exchange 2010 SP3

Hi there,
I am planning to install Exchange 2010 SP3 next week and after reading some of the related comments on this site I got a little worried.
Our current Exchange environment consists of the following:
1 x CAS/HT Server
2 x Mailbox Server (members of a DAG)
The OS of the 3 servers is Windows Server 2008 R2 SP1. All servers are running Exchange 2010 SP1 Update Rollup 6.
The Execution Policies on our Exchange servers are set as follows:
– CAS/HT Server:
Scope ExecutionPolicy
MachinePolicy Undefined
UserPolicy Undefined
Process Undefined
CurrentUser Undefined
LocalMachine Unrestricted
– Mailbox Servers:
Scope ExecutionPolicy
MachinePolicy Undefined
UserPolicy Undefined
Process Undefined
CurrentUser Undefined
LocalMachine RemoteSigned
Please note that we do not have any Group Policies that defined the PowerShell script execution policy.
I would be very grateful if you (or any of the kind readers) could help me with following questions:
1- Do I have to change the execution policy on our Exchange servers before installing SP3? If I have to change a policy, what should I change? And how would you recommend I should do this?
2- After installing SP3 on a server, can I install the latest rollup update on this server before moving to the next server? For example, can I do the following:
i. Install SP3 followed by RU 5 on the CAS/HT server -> Apply the our custom settings
ii. Install SP3 followed by RU 5 on the first mailbox server
iii. Install SP3 followed by RU 5 on the second mailbox server
Many thanks,
M

Hi Amit,
Many thanks for the swift reply.
That's correct. We didn't set the Powershell execution policy via Group Policy. We only configured the execution policy of "LocalMachine" to "Unrestricted" on the CAS/HT server using the "Set-ExecutionPolicy" command on the server.
The mailbox servers' execution policies have not been changed and are set to those values by default.
I must admit, I go event more confused when I read the "http://support.microsoft.com/kb/2668686" and "http://support.microsoft.com/kb/2810617" articles.
But it looks like I shouldn't worry as our current Powershell execution policies shouldn't affect the upgrade. Right?

Help! oracle report out of order after update Rollup for windows 2000 sp4

hello once again
i haven't received any solution of my problem, so i am again uploading it.
----PROBLEM IS GIVEN BELOW-----
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
defining page size in files like wide180.PRT in printers folder in oracle directory.
Is there anyway to print the report without uninstalling windows patch?
thanks

I don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
Search google for printing issues with this patch
Search Microsoft forums for Windows 2000
And if you have metalink account, search metalink forum, document/note or open a SR for this.

Update Rollups - Order of installation and on which servers?

Hi, this may seem like a basic question to many, but I'm going to ask it anyway ;-) !!
We have SCSM 2012 Sp1 installed across 4 servers-
* 2 x load balanced Manager servers
* SQL server for Service Manager DB
* DW server
I would like to install Update Rollup 4 into our environment and looking at the instructions, it simply says to close down all connections to the system and run the update. However, I would like to know if there's any particular order of servers which I
need to run the update and whether it applies only to the Manager servers or does it also need running on the DW??
Cheers,
Max.

There is a good and helpful blog post available for upgrading to SCSM 2012 SP1 from Microsoft:
Upgrading to System Center 2012 SP1-Service Manager (SCSM) at Microsoft
If there are no special comments in the UR instructions I would follow this order in the blog post:
SCSM DW
SCSM Management server (primary first)
SCSM Portal
SCSM consoles
Hope this helps.
Andreas Baumgarten | H&D International Group

Deployment of KB2936068 update Rollups

Similar Messages

Maybe you are looking for