Deployment problems with dtd

i've been trying to deploy on as but i get the following error:
oracle.oc4j.admin.internal.DeployerException: Error initializing ejb-module; Exception Failure to initialize EJBQL descriptors: com.sun.enterprise.deployment.xml.ParseException: Server returned HTTP response code: 403 for URL: http://java.sun.com/dtd/ejb-jar_2_0.dtd
but if i try to deploy on the embedded i got no error, btw im using jdeveloper 10g as ide

We had the exact same issue 403 forbidden for ejb-jar.xml files that have EJBQL. Our workaround was to put the dtds on the local filesystem. You can find the dtds in the oc4j.jar under home.
Replace http://java.sun.com/dtd/ejb-jar_2_0.dtd with file:///[LOCATION_OF_DTDS]/ejb-jar_2_0.dtd and then try to deploy again.
Hope this helps

Similar Messages

Deploying problem with remout OC4J (10.1.2)

Hello!
I have a problem with PDK-Java Portlet deployng. I'm relatively new in this field.
I use Jdeveloper 10g (10.1.2). I have read in the Jdeveloper help how to deploy portlet on remout Application Server.
I start the following comand in server's console where OC4J installed:
java -jar ${ORACLE_HOME}/j2ee/home/admin.jar ormi://myserver:3204 my_pass -deploy -file Oc4jDcmServlet.ear -deploymentName Oc4jDcmServlet
and get the Error: Unable to find java:comp/ServerAdministrator: Lookup error: javax.naming.AuthenticationException: Invalid username/password for default (adminuser);
I login to Enterprise Manager 10g Application Server Control by the same user(adminuser) and the same password (my_pass).
Anybody know how to resolve this problem?

did you change the admin password after installation?
Oracle doesnt change all passwords, the password entered during installation of OC4J is the password you have to use for deployment from JDEV
atleast, thats my experiance

JAXB problem with DTD file

Hi All,
I just started to learn JAXB and I come to a point in which I need to run xjc on a dtd file and jxs file. The problem is that is gives me an ERROR :
"parsing a schema...
[ERROR] The markup in the document preceding the root element must be well-forme
d.
line 1 of checkbook.dtd
This is my dtd file:
<!ELEMENT checkbook ( transactions, balance ) >
<!ELEMENT transactions ( deposit | check | withdrawal )* >
<!ELEMENT deposit ( date, name, amount )>
<!ATTLIST deposit category ( salary | interest-income | other ) #IMPLIED >
<!ELEMENT check ( date, name, amount, ( pending | void | cleared ), memo? )>
<!ATTLIST check number CDATA #REQUIRED category ( rent | groceries | other ) #IMPLIED >
<!ELEMENT withdrawal ( date, amount ) >
<!ELEMENT balance (#PCDATA) >
<!ELEMENT date (#PCDATA ) >
<!ELEMENT name (#PCDATA) >
<!ELEMENT amount (#PCDATA) >
<!ELEMENT memo (#PCDATA) >
<!ELEMENT pending EMPTY >
<!ELEMENT void EMPTY >
<!ELEMENT cleared EMPTY >
What is the problem with it?
Need your help and THANKS in advance
A.B

Try adding dom4j.jar (http://www.dom4j.org/) to your classpath and compiling with the -dtd switch. E.g.:
xjc -dtd foo.dtd
-- Ed

General install and deployment problem with WLS clustering on two boxes

Hi,
I've come across a general installation problem with WLS with a cluster spanning two different physical machines and two Managed Servers, one Managed Server per physical machine.
The problem is, starting from scratch, you install WLS on both physical machines. You can then use the config wizard to create the domain, cluster and managed servers, but this is a manual typing in process.
So we've now got a WLST Script which we run with "java weblogic.WLST domaincreate.py domain.properties". This is good as it creates the domain, cluster, managed servers and JMS modules.
Now the trouble is, it doesn't do anything to the 2nd physical machine which will be running only the 2nd Managed Server.
One dirty way to get around this in order to start the 2nd managed server was to copy the domain directory to the 2nd server, but I'm sure this is bad practice and what you can actually do is improve the WLST script to actually, but the same as the config wizard and dump the nessary information to the 2nd physical machine in order so you don't need to copy the domain directory across so that it will startup straight after running the WLST.
Any help appriecated.
Surfbum.

Hi I think I've found the answer. You can build a managed server template using the pack command.
http://e-docs.bea.com/common/docs90/pack/tasks.html

Deployment problem with finder method

I have a problem deploying an application that was working prior to my adding a finder method to one of the entity beans. Here is the Descriptor from the EJB Module that i created (which appears to be ok):
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<display-name>RFXModule</display-name>
<enterprise-beans>
<session>
<display-name>RFXManager</display-name>
<ejb-name>RFXManager</ejb-name>
<home>au.com.alphawest.trader.rfx.business.management.RFXManagerHome</home>
<remote>au.com.alphawest.trader.rfx.business.management.RFXManagerRemote</remote>
<ejb-class>au.com.alphawest.trader.rfx.business.management.RFXManagerBean</ejb-class>
<session-type>Stateful</session-type>
<transaction-type>Container</transaction-type>
<ejb-local-ref>
<ejb-ref-name>ejb/rfx/RFXDocument</ejb-ref-name>
<ejb-ref-type>Entity</ejb-ref-type>
<local-home>au.com.alphawest.trader.rfx.business.data.RFXDocumentLocalHome</local-home>
<local>au.com.alphawest.trader.rfx.business.data.RFXDocumentLocal</local>
<ejb-link>RFXDocument</ejb-link>
</ejb-local-ref>
</session>
<entity>
<display-name>RFXAttachment</display-name>
<ejb-name>RFXAttachment</ejb-name>
<local-home>au.com.alphawest.trader.rfx.business.data.RFXAttachmentLocalHome</local-home>
<local>au.com.alphawest.trader.rfx.business.data.RFXAttachmentLocal</local>
<ejb-class>au.com.alphawest.trader.rfx.business.data.RFXDocumentAttachment</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>RFXAttachment</abstract-schema-name>
<cmp-field>
<field-name>name</field-name>
</cmp-field>
<cmp-field>
<field-name>type</field-name>
</cmp-field>
<cmp-field>
<field-name>attachmentContents</field-name>
</cmp-field>
<primkey-field>name</primkey-field>
</entity>
<entity>
<display-name>RFXDocument</display-name>
<ejb-name>RFXDocument</ejb-name>
<local-home>au.com.alphawest.trader.rfx.business.data.RFXDocumentLocalHome</local-home>
<local>au.com.alphawest.trader.rfx.business.data.RFXDocumentLocal</local>
<ejb-class>au.com.alphawest.trader.rfx.business.data.RFXDocumentBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>au.com.alphawest.trader.rfx.business.data.RFXDocumentPK</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>RFXDocument</abstract-schema-name>
<cmp-field>
<field-name>documentGUID</field-name>
</cmp-field>
<cmp-field>
<field-name>creationDate</field-name>
</cmp-field>
<cmp-field>
<field-name>creatorGUID</field-name>
</cmp-field>
<cmp-field>
<field-name>description</field-name>
</cmp-field>
<cmp-field>
<field-name>dueDate</field-name>
</cmp-field>
<cmp-field>
<field-name>emailAddress</field-name>
</cmp-field>
<cmp-field>
<field-name>faxNo</field-name>
</cmp-field>
<cmp-field>
<field-name>locked</field-name>
</cmp-field>
<cmp-field>
<field-name>notes</field-name>
</cmp-field>
<cmp-field>
<field-name>organisationName</field-name>
</cmp-field>
<cmp-field>
<field-name>ownerGUID</field-name>
</cmp-field>
<cmp-field>
<field-name>requestId</field-name>
</cmp-field>
<cmp-field>
<field-name>subject</field-name>
</cmp-field>
<cmp-field>
<field-name>telephoneNo</field-name>
</cmp-field>
<cmp-field>
<field-name>unitGUID</field-name>
</cmp-field>
<cmp-field>
<field-name>buyer</field-name>
</cmp-field>
<cmp-field>
<field-name>organisationGUID</field-name>
</cmp-field>
<cmp-field>
<field-name>sourceId</field-name>
</cmp-field>
<ejb-local-ref>
<ejb-ref-name>ejb/rfx/RFXDocumentAttachment</ejb-ref-name>
<ejb-ref-type>Entity</ejb-ref-type>
<local-home>au.com.alphawest.trader.rfx.business.data.RFXAttachmentLocalHome</local-home>
<local>au.com.alphawest.trader.rfx.business.data.RFXAttachmentLocal</local>
<ejb-link>RFXAttachment</ejb-link>
</ejb-local-ref>
<ejb-local-ref>
<description>A line item attached to this document</description>
<ejb-ref-name>ejb/rfx/RFXLineItem</ejb-ref-name>
<ejb-ref-type>Entity</ejb-ref-type>
<local-home>au.com.alphawest.trader.rfx.business.data.RFXLineItemLocalHome</local-home>
<local>au.com.alphawest.trader.rfx.business.data.RFXLineItemLocal</local>
<ejb-link>RFXLineItemBean</ejb-link>
</ejb-local-ref>
<query>
<description>Find the rfx documents related to the given supplier through it's line items</description>
<query-method>
<method-name>findBySupplierId</method-name>
<method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
<ejb-ql>SELECT OBJECT(d) FROM RFXDocument AS d, IN(d.lineItems) l WHERE l.supplierGuid = 'DummySupplierGuid'</ejb-ql>
</query>
</entity>
<entity>
<display-name>RFXLineItem</display-name>
<ejb-name>RFXLineItem</ejb-name>
<local-home>au.com.alphawest.trader.rfx.business.data.RFXLineItemLocalHome</local-home>
<local>au.com.alphawest.trader.rfx.business.data.RFXLineItemLocal</local>
<ejb-class>au.com.alphawest.trader.rfx.business.data.RFXLineItemBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.math.BigDecimal</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>RFXLineItem</abstract-schema-name>
<cmp-field>
<field-name>itemId</field-name>
</cmp-field>
<cmp-field>
<field-name>rfxGuid</field-name>
</cmp-field>
<cmp-field>
<field-name>contractCode</field-name>
</cmp-field>
<cmp-field>
<field-name>supplierGuid</field-name>
</cmp-field>
<cmp-field>
<field-name>productCode</field-name>
</cmp-field>
<cmp-field>
<field-name>description</field-name>
</cmp-field>
<cmp-field>
<field-name>quantity</field-name>
</cmp-field>
<cmp-field>
<field-name>units</field-name>
</cmp-field>
<primkey-field>itemId</primkey-field>
</entity>
</enterprise-beans>
<relationships>
<ejb-relation>
<ejb-relation-name>RFXDocument-RFXAttachment</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>RFXDocument</ejb-relationship-role-name>
<multiplicity>One</multiplicity>
<relationship-role-source>
<ejb-name>RFXDocument</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>attachments</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>RFXAttachment</ejb-relationship-role-name>
<multiplicity>Many</multiplicity>
<cascade-delete/>
<relationship-role-source>
<ejb-name>RFXAttachment</ejb-name>
</relationship-role-source>
</ejb-relationship-role>
</ejb-relation>
<ejb-relation>
<ejb-relation-name>RFXDocument-RFXLineItem</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>RFXDocument</ejb-relationship-role-name>
<multiplicity>One</multiplicity>
<relationship-role-source>
<ejb-name>RFXDocument</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>lineItems</cmr-field-name>
<cmr-field-type>java.util.Set</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>RFXLineItem</ejb-relationship-role-name>
<multiplicity>Many</multiplicity>
<cascade-delete/>
<relationship-role-source>
<ejb-name>RFXLineItem</ejb-name>
</relationship-role-source>
</ejb-relationship-role>
</ejb-relation>
</relationships>
<assembly-descriptor>
<container-transaction>
<description>This value was set as a default by Sun ONE Studio.</description>
<method>
<ejb-name>RFXAttachment</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
<container-transaction>
<description>This value was set as a default by Sun ONE Studio.</description>
<method>
<ejb-name>RFXDocument</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
<container-transaction>
<description>This value was set as a default by Sun ONE Studio.</description>
<method>
<ejb-name>RFXLineItem</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
<container-transaction>
<description>This value was set as a default by Sun ONE Studio.</description>
<method>
<ejb-name>RFXManager</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
I get the following error message when i try to run the EJB Module through the Sun One Verifier Tool:
Error: ** Error trying to process file: java.lang.RuntimeException: No method found for XML query element: Ambiguous or invalid <query-method>
java.lang.RuntimeException: No method found for XML query element: Ambiguous or invalid <query-method>
at com.sun.enterprise.deployment.xml.EjbNode.parseQueries(EjbNode.java:700)
at com.sun.enterprise.deployment.xml.EjbNode.completeLoadingDescriptor(EjbNode.java:671)
at com.sun.enterprise.deployment.xml.EjbBundleNode.completeLoadingDescriptor(EjbBundleNode.java:524)
at com.iplanet.ias.deployment.EjbBundleXmlReader.load(EjbBundleXmlReader.java:249)
at com.iplanet.ias.deployment.EjbBundleXmlReader.loadStdAloneModule(EjbBundleXmlReader.java:162)
at com.sun.enterprise.tools.verifier.Verifier.openEjbJar(Verifier.java:2421)
at com.sun.enterprise.tools.verifier.Verifier.loadEjbJar(Verifier.java:1318)
at com.sun.enterprise.tools.verifier.Verifier.loadJar(Verifier.java:866)
at com.sun.enterprise.tools.verifier.gui.MainPanel.run(MainPanel.java:187)
at java.lang.Thread.run(Thread.java:536)
Look in file "RFXModule.jar_verified.xml" for detailed results on test assertions.
Any help would be greatly appreciated.
Mark Hesketh

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

MDM Business Package : Deployment problem with SDM GUI

Dear Experts,
I want to deploy the MDM Business Package on to the j2ee engine.However, when i go to the SDM GUI and select the first SDA(com.sap.mdm.tech.mdm4j.sda) file for deployment, it just hangs and nothing happens after that.I feel something is wrong with the SDM GUI.
Please let me know any possible solutions/alternatives to this problem.
Thanks,
Karambir Singh

Hi Karambir,
1) Are you trying to deploy the sda from your local machine or from a network drive? If a network drive, try copying it to your local machine and then deploying it.
2) If the SDM is connecting to a remote application server, it can sometimes take a long time to get a response.
3) Can you deploy other deployable archives via the SDM, or is only mdm4j.sda causing a problem?
Walter

OSB project deployment problem with MFL file

Hi,
I have created a OSB project to transform a xml message into a text file. For this I have created a mfl and the necessary proxy/business service. I can generate the sbconfig.jar from OEPE tool. But while trying to deploy the sbconfig.jar (generated from OEPE toll) in the OSB server the following error is coming:
<Sep 30, 2013 3:19:06 PM CEST> <Error> <ALSB Console> <BEA-494002> <Internal error occured in OSBConsole : com/bea/nonxml/util/NonXMLSchemaGenerator.genXsdFromMfl(Ljava/lang/String;Ljava/io/Reader;)Ljava/lang/String;
java.lang.Exception: com/bea/nonxml/util/NonXMLSchemaGenerator.genXsdFromMfl(Ljava/lang/String;Ljava/io/Reader;)Ljava/lang/String;
        at jsp_servlet._jsp._main.__errorpage._jspService(__errorpage.java:134)
        at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
        Truncated. see log file for complete stacktrace
Caused By: java.lang.NoSuchMethodError: com/bea/nonxml/util/NonXMLSchemaGenerator.genXsdFromMfl(Ljava/lang/String;Ljava/io/Reader;)Ljava/lang/String;
        at com.bea.wli.common.mfl.MflExecutor.create(MflExecutor.java:76)
        at com.bea.wli.sb.resources.mfl.MflExecutor.create(MflExecutor.java:72)
        at com.bea.wli.sb.resources.mfl.MflEntryHelper.validate(MflEntryHelper.java:90)
        at com.bea.wli.sb.resources.mfl.MflTypeDef.validate(MflTypeDef.java:54)
        at com.bea.wli.config.validation.ResourceValidator.validateContents(ResourceValidator.java:118)
        Truncated. see log file for complete stacktrace
>
[INFO ][alloc ][Mon Sep 30 15:19:11 2013][00464] [YC#33320] Pending requests
Can someone please help me out regarding this problem and let me know the reason.
I am using 11.1.1.5.0 version of OSB.
Please let me know if you need any further details.
Thanks.
Rahul

Hi Ahul,
     It may cause because of the following problem,
1) Make Sure that your MFL is working perfectly
2) Make sure that your OSB Server is Running with out any error..
Let me know still your facing the problem
Regards,
Kiran

[deployment] problems with a big application

Hi, I try to deploy a big application using EJB and web modules. All seem to be fine but I get that error when initializing something after d?ployment of my modules:
28050 catalog INFO [[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel
.Default (self-tuning)'] openjpa.MetaData - Parsing class "be.star.design.model.
catalog.entity.UserRole".
28070 catalog INFO [[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel
.Default (self-tuning)'] openjpa.MetaData - Parsing sequence "genUserRole".
<25-avr.-2007 10 h 22 min 44 s CEST> <Error> <ServletContext-/config> <BEA-00000
0> <action: null
javax.ejb.EJBException: nested exception is: <4|true|0.9.7> org.apache.openjpa.p
ersistence.ArgumentException: You have supplied columns for "be.star.design.mode
l.catalog.entity.User.userRestrictions", but this mapping cannot have columns in
this context.
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(Remote
BusinessIntfProxy.java:57)
at $Proxy102.getUser(Unknown Source)
at be.star.webconfig.plugin.InitCatalogDBPlugIn.createUser(InitCatalogDB
PlugIn.java:361)
at be.star.webconfig.plugin.InitCatalogDBPlugIn.createBasicParameters(In
itCatalogDBPlugIn.java:339)
at be.star.webconfig.plugin.InitCatalogDBPlugIn.init(InitCatalogDBPlugIn
.java:412)
Truncated. see log file for complete stacktrace
>
<25-avr.-2007 10 h 22 min 44 s CEST> <Error> <HTTP> <BEA-101216> <Servlet: "acti
on" failed to preload on startup in Web application: "config".
javax.servlet.UnavailableException
at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServle
t.java:880)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:336)
at javax.servlet.GenericServlet.init(GenericServlet.java:241)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(St
ubSecurityHelper.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
Truncated. see log file for complete stacktrace
>
Any ideas ?
Is it a struts problems ?
Incompatibility ?
Thanks

There is something wrong with your PC
I am using the same config while I work on TV Animations with
fla files > 150 MB in size and more than 3000 frames in 30
scenes, 128 KBPS sound etc. - Cakewalk - No Hour Glass.
I am using original Intel Motherboard - 945 HT

Web Module Deployment Problem with Weblogic [Deployer:149026]

Dear Friends,
I've been facing a problem during deploying an Web Module on Weblogic 8.1. The name of my webmodule is 'MyOraWebModule'.
When I first developed, deployed and tested it in Weblogic 8.1, it was deployed and worked fine. But on the next day, when I tried to redeploy it, the deployment failed. This thing not just happens only once.. it is happeing always i.e. if I develop a new webmodule and deploy/redeploy it, it will work fine ONLY ON THE FIRST DAY (i.e. the day when the web module is created), but on the next day, it shows the following error if I try to redeploy it. The error is:
Task 3 failed: [Deployer:149026]Deploy application MyOraWebModule on myserver.
Deployment failed on Server myserver
Exception:weblogic.management.ApplicationException: prepare failed for MyOraWebModule
Module: MyOraWebModule Error: Context path 'MyOraWebModule' is already in use by the module: MyOraWebModule
Any suggestion or, guideline from you will be highly appreciated.
With Thanks,
... Chisty

Not sure if you are still looking for the answer. I have a similar problem, I have a work around on it but still trying to identify what the issue is. I have deployed multiple web application modules on weblogic 8.1 and on the redeploy I was gettig the exception weblogic.management.ApplicationException: prepare failed for USER_DEFINED_MODULE_NAME
Context path '/' is already in use by the module. when this exception is thrown I observed that the targets attribute of tag WebAppComponent is initialized to the server name. If I stop the server, make the value of the targets attribute to be empty string in config.xml and start the server, the server starts fine. And I could continue. Not sure why this is so since the targets attribute is used to identify on what servers the application needs to be deployed.
Any input on why the weblogic 8.1 is behaving this way when the targets attribute is defined with a value would of great help.
thanks,

HOT deployment problem with WebLogic 5.1sp11

Hello!
We trying to deploy our EJB (jar contains 5 EJB's) with WebLogic EJB DeployerTool.
When we registered our jar in the weblogic.properties file - everything is OK.
This ejb cotains correct EJB's which are made in EJB 1.1 standard.
In the WebLogic EJB DeployerTool I attach proper WeaWeblogic application server
(it works on another computer, but tool found our server confidently. Then I opened
my jar file. Tool parsed file and found all beans.
After all I'm trying to run Tools/Deploy and I have the error message showed below.
If somebody knows how to manage with this problem, help!
weblogic.ejb.common.DeploymentException: Problem creating deployment ftp://172.16.2.108:21C:/tmp2/StaffShell.jar
from ftp://172.16.2.108:21C:/tmp2/StaffShell.jar; nested exception is:
     java.lang.NullPointerException:
Start server side stack trace:
java.lang.NullPointerException
     at sun.net.www.ParseUtil.decode(ParseUtil.java:27)
     at sun.net.www.protocol.ftp.FtpURLConnection.getInputStream(FtpURLConnection.java:108)
     at java.net.URL.openStream(URL.java:798)
     at weblogic.ejb.internal.EJBJarDeployment.initializeJarFile(EJBJarDeployment.java:322)
     at weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:191)
     at weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:166)
     at weblogic.ejb.internal.EJBDeploymentImpl.<init>(EJBDeploymentImpl.java:172)
     at weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:100)
     at weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:94)
     at weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:332)
     at weblogic.ejb.common.EJBManager_WLSkel.invoke(EJBManager_WLSkel.java:144)
     at weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAdapter.java:347)
     at weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandler.java:96)
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:15)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
End server side stack trace
java.lang.NullPointerException:
Start server side stack trace:
java.lang.NullPointerException
     at sun.net.www.ParseUtil.decode(ParseUtil.java:27)
     at sun.net.www.protocol.ftp.FtpURLConnection.getInputStream(FtpURLConnection.java:108)
     at java.net.URL.openStream(URL.java:798)
     at weblogic.ejb.internal.EJBJarDeployment.initializeJarFile(EJBJarDeployment.java:322)
     at weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:191)
     at weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:166)
     at weblogic.ejb.internal.EJBDeploymentImpl.<init>(EJBDeploymentImpl.java:172)
     at weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:100)
     at weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:94)
     at weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:332)
     at weblogic.ejb.common.EJBManager_WLSkel.invoke(EJBManager_WLSkel.java:144)
     at weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAdapter.java:347)
     at weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandler.java:96)
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:15)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
End server side stack trace
Deployment failed.

Is SP11 jars in the client classpath or not, before launching DeployerTool.
If yes, then it looks like a bug. You might want to report this problem to
[email protected]
Kumar
"Anton Nazarov" <[email protected]> wrote in message
news:[email protected]...
>
Hello!
We trying to deploy our EJB (jar contains 5 EJB's) with WebLogic EJBDeployerTool.
When we registered our jar in the weblogic.properties file - everything isOK.
This ejb cotains correct EJB's which are made in EJB 1.1 standard.
In the WebLogic EJB DeployerTool I attach proper WeaWeblogic applicationserver
(it works on another computer, but tool found our server confidently. ThenI opened
my jar file. Tool parsed file and found all beans.
After all I'm trying to run Tools/Deploy and I have the error messageshowed below.
>
If somebody knows how to manage with this problem, help!
weblogic.ejb.common.DeploymentException: Problem creating deploymentftp://172.16.2.108:21C:/tmp2/StaffShell.jar
from ftp://172.16.2.108:21C:/tmp2/StaffShell.jar; nested exception is:
java.lang.NullPointerException:
Start server side stack trace:
java.lang.NullPointerException
at sun.net.www.ParseUtil.decode(ParseUtil.java:27)
atsun.net.www.protocol.ftp.FtpURLConnection.getInputStream(FtpURLConnection.ja
va:108)
>
at java.net.URL.openStream(URL.java:798)
atweblogic.ejb.internal.EJBJarDeployment.initializeJarFile(EJBJarDeployment.ja
va:322)
>
at weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:191)
at weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:166)
atweblogic.ejb.internal.EJBDeploymentImpl.<init>(EJBDeploymentImpl.java:172)
>
atweblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:100)
>
at weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:94)
at weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:332)
atweblogic.ejb.common.EJBManager_WLSkel.invoke(EJBManager_WLSkel.java:144)
>
atweblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAda
pter.java:347)
>
atweblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandle
r.java:96)
>
atweblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
5)
>
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
End server side stack trace
java.lang.NullPointerException:
Start server side stack trace:
java.lang.NullPointerException
at sun.net.www.ParseUtil.decode(ParseUtil.java:27)
atsun.net.www.protocol.ftp.FtpURLConnection.getInputStream(FtpURLConnection.ja
va:108)
>
at java.net.URL.openStream(URL.java:798)
atweblogic.ejb.internal.EJBJarDeployment.initializeJarFile(EJBJarDeployment.ja
va:322)
>
at weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:191)
at weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:166)
atweblogic.ejb.internal.EJBDeploymentImpl.<init>(EJBDeploymentImpl.java:172)
>
atweblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:100)
>
at weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:94)
at weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:332)
atweblogic.ejb.common.EJBManager_WLSkel.invoke(EJBManager_WLSkel.java:144)
>
atweblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAda
pter.java:347)
>
atweblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandle
r.java:96)
>
atweblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
5)
>
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
End server side stack trace
Deployment failed.

Java Stored Procedure Deployment Problem with JDev 3.1.1.2

Dear JDeveloper Team:
I am having a problem deploying a test Java stored procedure to the database. In the Deployment Profile Wizard Connection tab, it displays no connection in the connection dropdown even though I have defined some connections that have been sucessfully connected to the database.
Please help.
Thanks,
Tom

Tom,
Verify that your Connections are valid as follows:
Double Click on the Connections folder of JDeveloper Navigator.
This opens up the Connection Manager.
Make sure you have defined JDBC Connections.
Pick your connection of intrest and select Edit... and then press the Test button to test the conneciton.
If this is a valid JDBC connection, then it should appear later when you run the deployment wizard.
-John

XML load using PL/SQL (XSU) problem with dtd file.

Hi,
I'm trying to load a xml file and receives this errormassage:
SQL> exec loadxml;
In Exception
ORA-29532: Java call terminated by uncaught Java exception:
oracle.xml.sql.OracleXMLSQLException: Error opening external DTD
'Businesscard.DTD'.
Any idea what I can change? Below is the things I've done and also how the xml file looks
and the dtd file.
Regards
Jorgen
CREATE DIRECTORY XML_DIR AS 'C:\XML';
CREATE TABLE XML_TEMP (key NUMBER, f_lob BFILE);
INSERT INTO XML_TEMP VALUES (1,BFILENAME('XML_DIR','TeleAdressVKI0209021728.xml'));
CREATE TABLE XML_DOC (
Key1 VARCHAR2(32),
Key2     VARCHAR2(32),
Key3 VARCHAR2(32),
Terminate     VARCHAR2(3),
LegalName     VARCHAR2(420),
PopName          VARCHAR2(420),
StreetName     VARCHAR2(60),
StreetNumber     VARCHAR2(10),
PostNumber     VARCHAR2(10),
PostAdress VARCHAR2(30),
CordinateLevel     VARCHAR2(32),
xCor          VARCHAR2(10),
yCor VARCHAR2(10),
PoiCategory VARCHAR2(32),
Telephone VARCHAR2(30));
CREATE OR REPLACE PROCEDURE loadxml AS
fil BFILE;
buffer RAW(32767);
len INTEGER;
insrow INTEGER;
BEGIN
SELECT f_lob INTO fil FROM xml_temp WHERE key = 1;
DBMS_LOB.FILEOPEN(fil,DBMS_LOB.FILE_READONLY);
len := DBMS_LOB.GETLENGTH(fil);
DBMS_LOB.READ(fil,len,1,buffer);
xmlgen.resetOptions;
insrow := xmlgen.insertXML('xml_doc',UTL_RAW.CAST_TO_VARCHAR2(buffer));
DBMS_OUTPUT.PUT_LINE(insrow);
IF DBMS_LOB.FILEISOPEN(fil) = 1 THEN
DBMS_LOB.FILECLOSE(fil);
END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('In Exception');
DBMS_OUTPUT.PUT_LINE(SQLERRM(SQLCODE));
IF DBMS_LOB.FILEISOPEN(fil) = 1 THEN
DBMS_LOB.FILECLOSE(fil);
END IF;
end;
The xml file look like this:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE Cards SYSTEM 'Businesscard.DTD'>
<Cards>
<Comment>TeleAdress initial</Comment>
<OldFile>xxxx</OldFile>
<NewFile>xxxx</NewFile>
<Card>
<Key1>95352</Key1>
<Key2>159651</Key2>
<Key3>3807868</Key3>
<Terminate>no</Terminate>
<Cardholder>
<LegalName>
<Name>
<Full>AXFOOD DIREKT AB</Full>
</Name>
</LegalName>
<PopName>
<Name>
<Full>WILLYS LEGPRIS AB</Full>
</Name>
</PopName>
</Cardholder>
<Location>
<Address>
<StreetInfo>
<StreetName>BAGARBYVDGEN</StreetName>
<StreetNumber>61</StreetNumber>
</StreetInfo>
<ZipCode>19134</ZipCode>
<City>SOLLENTUNA</City>
<Coordinate>
<Level>1</Level>
<xCor>1620480</xCor>
<yCor>6592717</yCor>
</Coordinate>
</Address>
<Business>
<POI>
<POIId>46</POIId>
<POIId>84</POIId>
</POI>
<InfoRow>
<Subscriptions>
<TelAddress>08 6234540</TelAddress>
</Subscriptions>
</InfoRow>
</Business>
</Location>
</Card>
<Card_Count>1</Card_Count>
</Cards>
the dtd file looks like this:





<!ELEMENT     Cards     (Comment,OldFile?,NewFile,Card*,Card_Count)>
     <!ELEMENT     Comment                         (#PCDATA)>
     <!ELEMENT     OldFile                         (#PCDATA)>
     <!ELEMENT     NewFile                         (#PCDATA)>

<!ELEMENT     Card     (Key1, Key2, Key3, Terminate, (RegNo?, Cardholder, Row*)?)>
     <!ELEMENT     Key1          (#PCDATA)>
     <!ELEMENT     Key2          (#PCDATA)>
     <!ELEMENT     Key3          (#PCDATA)>
     <!ELEMENT     Terminate     (#PCDATA)> 

<!ELEMENT     Cardholder     (RegNo, OrgType, LegalName, PopName?, Location)     >
     <!ELEMENT     RegNo          (#PCDATA)>
     <!ELEMENT     OrgType          (#PCDATA) >

<!ELEMENT     LegalName          (Name)>

<!ELEMENT     PopName          (Name+)>

<!ELEMENT     Location          (Adress+, Unit*, Business)>

<!ELEMENT     Unit          (UnitNo, UnitName?, Status, HQ, SNI1?, SNI2?, SNI3?, WorkPlaceNo, WorkPlaceName?)>
     <!ELEMENT     UnitNo          (#PCDATA)>
     <!ELEMENT     UnitName     (#PCDATA)>
     <!ELEMENT     Status          (#PCDATA)>
     <!ELEMENT     HQ          (#PCDATA)> 
     <!ELEMENT     SNI1          (#PCDATA)>
     <!ELEMENT     SNI2          (#PCDATA)>
     <!ELEMENT     SNI3          (#PCDATA)>
     <!ELEMENT     WorkPlaceNo     (#PCDATA)>
     <!ELEMENT     WorkPlaceName     (#PCDATA)>

<!ELEMENT     Business          (POI?, InfoRow*)>

<!ELEMENT     POI          (POIId+)>
     <!ELEMENT     POIId          (#PCDATA)>

<!ELEMENT     InfoRow          (Number,Heading*,Name?, Address?, Text?, HomePageAddresses?, EMailAddresses?, Subscriptions?)>
     <!ELEMENT     Number          (#PCDATA)>

<!ELEMENT     Heading          (LevelNo, LevelName)>
     <!ELEMENT      LevelNo          (#PCDATA)>
     <!ELEMENT     LevelName     (#PCDATA)>

<!ELEMENT     Name          (Full,First?,Middle?,Last?)>
     <!ELEMENT      Full          (#PCDATA)>
     <!ELEMENT     First          (#PCDATA)>
     <!ELEMENT     Middle          (#PCDATA)>
     <!ELEMENT     Last          (#PCDATA)>

<!ELEMENT     Address               (Type, StreetInfo?,TextBeforeZipCode?,ZipCode?,City?,AReg?,
                         Municipality?,County?,Country?,Coordinate?)>
     <!ELEMENT     Type               (#PCDATA)>
     
     <!ELEMENT     StreetInfo          (PostBox?, StreetName?,StreetNumber?,Entrance?, CO?)>
          <!ELEMENT     PostBox               (#PCDATA)>
          <!ELEMENT     StreetName          (#PCDATA)>
          <!ELEMENT     StreetNumber          (#PCDATA)>
          <!ELEMENT     Entrance          (#PCDATA)>
          <!ELEMENT     Co               (#PCDATA)>
     <!ELEMENT     TextBeforeZipCode     (#PCDATA)>
     <!ELEMENT     ZipCode               (#PCDATA)>
     <!ELEMENT     City               (#PCDATA)>
     <!ELEMENT     AReg               (#PCDATA)>
     <!ELEMENT     Municipality          (#PCDATA)>
     <!ELEMENT     County               (#PCDATA)>
     <!ELEMENT     Country               (#PCDATA)>
     
     <!ELEMENT     Coordinate          (Level, xCor,yCor)>
          <!ELEMENT     Level          (#PCDATA)>
          <!ELEMENT     xCor          (#PCDATA)>
          <!ELEMENT     yCor          (#PCDATA)>

<!ELEMENT     Text          (InfoText+)>
     <!ELEMENT     InfoText          (#PCDATA)>

<!ELEMENT     HomePageAddresses          (HomePage+)>
     <!ELEMENT     HomePage          (#PCDATA)>

<!ELEMENT     EMailAddresses          (EMail+)>
     <!ELEMENT     EMail          (#PCDATA)>

<!ELEMENT     Subscriptions     (ClassifiedCode?, Type, TelAddress, TextAfter?)     >
     <!ELEMENT     TelAddress     (#PCDATA)>
     <!ELEMENT     TextAfter     (#PCDATA)>
<!ELEMENT     Card_Count               (#PCDATA)>






I've got the same problem,
How to define the directory in witch the DTD is????
We need something like DBMS_XMLSave.setdirectoryDTD, that doesn't exist.
ben
ERREUR ` la ligne 1 :
ORA-29532: appel Java arrjti par une exception Java non interceptie :
oracle.xml.sql.OracleXMLSQLException: Error opening external DTD
'annoncesv22.dtd'.
ORA-06512: ` "SDEV.SIMPORT", ligne 205
ORA-06512: ` ligne 1

Deployment problem with glassfish v2

hi,
when i am trying to deploy a WAR file on glassfish v2 following errors are coming.....
Timestamp Sep 11, 2008 14:30:26.006
Log Level SEVERE
Logger javax.enterprise.system.tools.deployment
Name-Value Pairs ThreadID=17;ThreadName=Thread-682;_RequestID=b8995ab4-b83a-4c5f-a476-acd3863f6428;
Record Number 1424
Message ID Exception occured in J2EEC Phase com.sun.enterprise.deployment.backend.IASDeploymentException
Complete Message Error expanding archive C:\Users\ADMIN\AppData\Local\Temp\systemcontrol53465.war; please see the server log file for more information at com.sun.enterprise.deployment.backend.J2EEModuleExploder.explodeJar(J2EEModuleExploder.java:359) at com.sun.enterprise.deployment.backend.WebModuleDeployer.preDeploy(WebModuleDeployer.java:131) at com.sun.enterprise.deployment.backend.ModuleDeployer.doRequestFinish(ModuleDeployer.java:171) at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:191) at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:108) at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:919) at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:279) at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:788) at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:187) at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:223)
but the page is running perfectly fine in my IDE.i have observed that this problem occurs when i use any .js file in my project.
Please help

As the stack trace states ("please see the server log file for more information"), you should look at the server log to get more details on what is causing this.

Deployment problem with update

Hi,
I'm new in SAP NetWeaver Developer Studio etc. So I installed a local test environment on my pc and everything works fine. Then I created the first test project (Calculator) deployed and tested it. No problems. Looks good. Then I tried to make a simple change (changed text) in the JSP file and deployed it. The deployment succeeded but the changes are not visible in the browser. I exported the EAR file and looked in the contained JSP file; there are the changes available. So I guess something runs wrong during deployment to the J2EE environment?!
Any ideas where I failed ???

Hi,
I'm new in SAP NetWeaver Developer Studio etc. So I installed a local test environment on my pc and everything works fine. Then I created the first test project (Calculator) deployed and tested it. No problems. Looks good. Then I tried to make a simple change (changed text) in the JSP file and deployed it. The deployment succeeded but the changes are not visible in the browser. I exported the EAR file and looked in the contained JSP file; there are the changes available. So I guess something runs wrong during deployment to the J2EE environment?!
Any ideas where I failed ???

Hot deployment problems with weblogic 7.0 sp2

Hi Guys
I am trying out hot deplyment of a j2ee application on WebLogic Server 7.0 SP2
Approach 1
The application is deployed in exploded ear format from the folder
d:/work/testbed/ear. The appropriate entry in config.xml looks like this.
<Application Deployed="true" Name="Testbed"
Path="D:\tools\bea702\projects\testbed\applications\testbed"
StagedTargets="" TwoPhase="false">
<EJBComponent Name="SessionBeans" Targets="myserver" URI="SessionBeans.jar"/>
</Application>
Creating or touching the REDEPLOY file in META-INF folder doesnt cause hot
deployment to occur
Approach 2
Copied the ear file to the applications folder. Creating or touching the
REDEPLOY file in META-INF file caused the application to be redeployed.
However the weblogic console is constantly spitting out this message.
Undeploying EJB Component SessionBeans
<Sep 29, 2003 9:53:46 PM IST> <Notice> <Application Poller> <149400> <Activating application: Testbed>
<Sep 29, 2003 9:53:46 PM IST> <Notice> <Application Poller> <149404> <Activate application Testbed on myserver - Completed>
Undeploying EJB Component SessionBeans
<Sep 29, 2003 9:53:51 PM IST> <Notice> <Application Poller> <149400> <Activating application: Testbed>
<Sep 29, 2003 9:53:52 PM IST> <Notice> <Application Poller> <149404> <Activate application Testbed on myserver - Completed>
Undeploying EJB Component SessionBeans
<Sep 29, 2003 9:53:57 PM IST> <Notice> <Application Poller> <149400> <Activating application: Testbed>
<Sep 29, 2003 9:53:57 PM IST> <Notice> <Application Poller> <149404> <Activate application Testbed on myserver - Completed>
It seems that the application is getting undeployed and reactivated every 5
seconds.
Questions
1) Any reasons why approach 1 didnt work
2) What could be causing this constant undeployment and reactivation
Thanks for your time
anand

I think I figured out what is causing the application to be redployed every 5
seconds. It seems that if the application is deployed in the weblogic domains
applications folder you should NOT create a <Application element. Weblogic
automatically recognizes all applications in this folder and deploys them.
Removing the application entry (as shown in Approach 1) from the config.xml
and hot deploying by touching the REDEPLOY file did the trick.
One question still remains. Is hot deployment only possible when I copy the
exploded ear to the domain "applications" folder
Thanks for your time
anand
ps : The idea of trying it without the <Application element came from trying
out hot deployment in Weblogic 8. WLS8 first deploys the application in the
applications folder, followed by the application configured in the
<Application element. Since both the applications were essentially the same it
gave me a JNDIException saying that some entity is already bound with the same
name. Weblogic 7 however doesnt complain at this point.
- anand
In article <[email protected]>, Anand Raman wrote:
Hi Guys
I am trying out hot deplyment of a j2ee application on WebLogic Server 7.0 SP2
Approach 1
The application is deployed in exploded ear format from the folder
d:/work/testbed/ear. The appropriate entry in config.xml looks like this.
<Application Deployed="true" Name="Testbed"
Path="D:\tools\bea702\projects\testbed\applications\testbed"
StagedTargets="" TwoPhase="false">
<EJBComponent Name="SessionBeans" Targets="myserver" URI="SessionBeans.jar"/>
</Application>
Creating or touching the REDEPLOY file in META-INF folder doesnt cause hot
deployment to occur
Approach 2
Copied the ear file to the applications folder. Creating or touching the
REDEPLOY file in META-INF file caused the application to be redeployed.
However the weblogic console is constantly spitting out this message.
Undeploying EJB Component SessionBeans
<Sep 29, 2003 9:53:46 PM IST> <Notice> <Application Poller> <149400> <Activating application: Testbed>
<Sep 29, 2003 9:53:46 PM IST> <Notice> <Application Poller> <149404> <Activate application Testbed on myserver - Completed>
Undeploying EJB Component SessionBeans
<Sep 29, 2003 9:53:51 PM IST> <Notice> <Application Poller> <149400> <Activating application: Testbed>
<Sep 29, 2003 9:53:52 PM IST> <Notice> <Application Poller> <149404> <Activate application Testbed on myserver - Completed>
Undeploying EJB Component SessionBeans
<Sep 29, 2003 9:53:57 PM IST> <Notice> <Application Poller> <149400> <Activating application: Testbed>
<Sep 29, 2003 9:53:57 PM IST> <Notice> <Application Poller> <149404> <Activate application Testbed on myserver - Completed>
It seems that the application is getting undeployed and reactivated every 5
seconds.
Questions
1) Any reasons why approach 1 didnt work
2) What could be causing this constant undeployment and reactivation
Thanks for your time
anand

Deployment problems with dtd

Similar Messages

Maybe you are looking for