Deployment proplems for PRD-System with CTS (Web AS JAVA)
Hello!
We have a 3-Step-Landscape for deployment:
DEV
QoS
PRD
Using the portal i have an environment which shows an instance of SAP GUI for HTML, where i can choose
*CTS Browser
*STMS Queues
I can deploy EAR archives to the DEV System and transport it to the PRD. But the step to the PRD-System ist hanging. The protocol is showing, that there is still a session active:
Deployment
Transportauftrag : DE0K900382
System : DZ1
tp Pfad : tp
Version und Release : 372.04.04 700
Deploy Service called with following parameters:
CommunicationData-Type:0
CommunicationData-Address:http://bbmagz1:50018
CommunicationData-Host:bbmagz1
CommunicationData-Port:50018
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:0
Deployable-Id:/usr/sap/trans/data/DE0K900382/avitumtec-ear-1.0.ear
class java.rmi.RemoteException:Another Session=[Local port:0, Host:bbmagz1, Port:50018, SessionID:1]
>>>is still valid - cannot create a new one
Deployment
Endedatum und -zeit : 20080922093201
Beendet mit Returncode: ===> 12 <===
I read that there could be some deployment problems, because SDM is Single-Threaded. We already restarted the PRD-System, but that was without any effect. Can s.o. tell me what i can do, or what i have to say to our Administration people, that the running session will be killed?
With best regards
Hi All,
Any responses here?
Do we have a setting to control the session ID using which for deployment port 50018 would be connected while import.
Regards,
Karan Shah
Similar Messages
-
Registering ABAP system with SLD Web AS JAVA
Hello,
I'm trying to register an ABAP only system with an SLD that resides on a JAVA-only system. When registering the ABAP system in RZ70, I enter the gateway host of the JAVA-only system and the gateway service as "sapgw<instance>". However, when looking at the java-only system, I don't see that the gateway is even running.
The JAVA only system is running on Windows 2008.
A couple questions:
1) Is "sapgw<instance>" the gateway service on a java-only system?
2) If the gateway is running, does it show in the services or in the SAP MMC?
3) I've tried starting the gateway manually using "gwrd -force pf=<start profile>" and the dev_rd log says"***LOG S00=> GwInitReader, gateway started ( 2980) [gwxxrd.c 1757]
ERROR => [CreateOsShm] CreateFileMapping(5,4 KB) failed with Err=5
EIO*: Input/output error OR: Access is denied. [shmnt.c 2174]
ERROR => ShmCreate: Create (5,4096,1) failed [shmnt.c 506]
Is this the right way to start the gateway?
Any help would be greatly appreciated.
Thanks,
Dale DingmannHi Dale,
could you please tell us which Release your AS Java is? I have an AS Java 7.01(UsageType EP) on an AIX machine with a local SLD to which an AS ABAP 7.01 should register. I am not sure whether I can use the solution mentioned above or whether I have to install a standalone gateway.
System Landscape Directory Planning Guide (March 2010, page 43) quotes quite a similar solution but without Information concerning the release. This information also belongs to a standalone SLD. The last three scentences of SAP Note 1057720 quotes that for releases up to and including Release 7.0 one has to install a standalone gateway. In higher releases however "the SCS of the AS Java installs an RFC gateway and configures it as the default in the SLD". Is AS Java 7.01 a higher release than 7.00 and how can I check wheter there is an installed Gateway on SCS instance or not?
Can someone clarify that point?
Best Regards -
How to browse for a folder with ABAP WEB DYNPRO
Hi,
I want to browse for a folder in my local file system with ABAP
WEB DYNPRO. I am looking for a functionality which the function module
TMP_GUI_BROWSE_FOR_FOLDER gives.
Regards,
VinayHI Karl
Good evening, I am Maruti from London. I would like to paractise ABAP WebDynpro.I am not sure which Vesrion of SAP R/3 supports for ABAP WebDynpro applications. Can you please suggest me .
Thank you
Maruti
[email protected] -
Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com -
What Kind of microcontr​oller is needed for alarm system with PIR sensors
Hi ! I'm student at Technical University Varna ,
Bulgaria . I'm interessted to create my own alarm system with Labview,
but I'm not sure what kind of controller i need and what kind of PIR
sensors. Thank YouThis is duplicate post:
What Kind of microcontroller is needed for alarm system with PIR sensors -
SSO for application systems with local users?
Hi all, I'm new to Oracle Identity Management. My company is going to implement SSO for inhouse applications. However, some applications have their own local users (e.g. admin, guest, etc.) who have to login to the application system through the same interface. We put all organization users in an Oracle enterprise Directory server, which is the authentication backend of the Access Manager. After implementing webgate, such local users can't get authenticated. I'd like to know if it's possible to configure particular users/applications to bypass SSO and use local authentication? Thanks.
Rgds
/ST wongPossible solution is to create a new entry point for local users. Create two proxies one for actual user entry and another for local user. You can restrict n/w access to proxy with local login so that only few hosts based on your requirement who needs to access system with local accounts. This way you will have two web sites for single application.
-
App.server load balancing for SAP System with 1 PS
Hi,
In SAP CPS 7.0 (Build M26.12) I have a SAP system with Central Instance + 10 App.servers, but all instances are managed by 1 ProcessServer.
After activating the "App.server load balancing" setting in SAP system definition the application servers are becoming visible in CPS with their load factors (number of BGD wp's on app.servers) and load numbers (number of active jobs on app.servers).
This is so far fine, but the additional functionality is not working as I would expect, I have issues with 2 functionalities:
1. Based on documentation after activating also the XAL connection the CPS should submit the job on app.server with best performance based on XAL monitoring data filling the TARGET_SERVER parameter.
This functionality is not working for me at all
2. A useful functionality after activating the "App.server load balancing" setting is that the ProcessServer is going to "Overloaded" status when all BGD wp's of SAP system are occupied, thus restricting submitting new jobs during overload situation. But I had an issue also with this functionality, after SAP system recovery from overload situation, the CPS still remained in Overload status (so no new jobs were submitted).
As a workaround I had increased the treshold values for loads on all app.servers for this SAP system, what was fine for several days, but after a while I believe this was a reason of unexpected performance issues in CPS, therefore I have deactivated the 'App.server load balancing" setting at all for this ProcessServer.
I would appreciate your feedbacks with this functionality.
Thanks and Regards,
Ernest LiczkiHi Preetish,
This connect string option is to loadbalance RFC connections. These are balanced upon login, once you are connected to a particular application server (AS) you stay on that server until you reconnect.
Since CPS uses multiple RFC connections, this will result in the connections being distributed over the available AS resources which is fine as long as they are generally evenly loaded. If you have certain AS hosts that are continuosly more loaded than the rest, then you probably don't want the CPS RFC connections to end up on these servers.
The original question is about loadbalancing of batch jobs over the available AS resources, and this is done independent of the RFC connection load balancing. Even if all CPS RFC connections are pinned to the DB/CI host, you can still loadbalance jobs over the available SAP AS hosts, either by using SAPs builtin balancing, or the CPS algorithm by activating the checkbox as indicated in the first entry in this thread.
Finally, to reply to Ernest's question: I believe there are some fixes on the app load balancing in the latest release, M26.17 should be available on the SWDC now.
Regards,
Anton.
Edited by: Anton Goselink on May 29, 2009 9:06 PM -
Create a Connection on TREX for 2 systems with same SID
Hello world,
Here is my case,
We have a PRO systems With SID=PRO On Host= production , and a Sandbox system with also SID=PRO On Host=SANDBOX
now i need to create a connection in TREX in parallel so when i add the 2nd one it just edits the 1st one that i have already made
So is it possible to create 2 connection of same SID but diffrent Hosts In parallel?
If Yes how ?
Thanks In Advance...
Ahmed SalamHi Ahmed,
it could be possible from the TREX perspective , however such configuration isn't supported . The reason for this is that the SAP applications create indexes using the ABAP system ID and client as a part of the index names (f.e. esh:e10002~e10002~acc_sid~sid). As it's not possible to create an index with the same name 2nd time, you will not be able to use the TREX instance with two systems with same SID.
Best regards,
Mikhail -
ORA-02065: illegal option for ALTER SYSTEM with "_mutex_wait_scheme"
Hello,
I have the Oracle version 11.2.0.2.0 in Windows. I'm trying to set starting parameter "_mutex_wait_scheme".
I am trying with the following command:
ALTER SYSTEM SET "_mutex_wait_scheme" = 1 SCOPE = SPFILE;
But I have the following error:
ERROR at line 1:
ORA-02065: illegal option for ALTER SYSTEM
Could tell me what is the command that I use to change that parameter?
Best regards!Hello,
The syntax you used is correct,
alter system set "_MUTEX_WAIT_SCHEME" = 1 scope = spfile sid='*';
but it seems that there is a problem with this parameter in version 12.2.0.2
Check if you have installed patch 12431716
%ORACLE_HOME%\Opatch\opatch lsinventory -all | find "12431716"
If it is not installed you can install the latest bundle patch (Windows Patch Bundle 27 - 11/2013) that should contain that fix.
Regards
1588876 - Oracle Enhancement to add different "Mutex" wait schemes
This fix is included in 11.2.0.2.2 PSU but there is a problem with the parameters in that release. If using 11.2.0.2.2 PSU then it is advisable to get the patch for bug 12431716 to allow this fix to be controlled by the _mutex_* parameters as documented above. -
What Kind of microcontroller is needed for alarm system with PIR sensors
Hi ! I'm student at Technical University Varna ,
Bulgaria . I'm interessted to create my own alarm system with Labview,
but I'm not sure what kind of controller i need and what kind of PIR
sensors. Thank YouHi xellos,
I'm not sure what you need, but if my feelings is right, than what you want to do is sort of motion detector based on PIR sensor and some ucontroller. It this is what you need, than once again, such a question is rather suitable for other discussion forums, like LabVIEW Embedded.
However, in general you can go for ARM or Blackfin when thinking about embedded platform. See following links to get more ingormation on ARM and Blackfin with LabVIEW:
NI LabVIEW Embedded Module for ARM Microcontrollers
NI LabVIEW Embedded Module for ADI Blackfin Processors Development Kit
With choosing sensor, I suggest simple googling - with relativly little effort you can find many sensors. And you can pick on specification and requirements you have (just to note, National Instruments is not producing and usualy not selling sensors).
Regards,
Stefo -
BIOS recovery process for HP systems with AMI BIOS?
Hi,
I'm trying to fix an HP a6718uk model PC which has an M2N78-LA motherboard and (I think) and AMI BIOS. A BIOS update that came through HP Update has failed, and the machine will not boot.
As it's out of warranty the HP Repair Centre want £200.00 to fix it, even though a simple BIOS recovery process should be sufficient - does anyone know the BIOS recovery process for these systems? Everything I've read (not specific to these boards) says you should be able to put a BIOS update (called AMIBOOT.ROM) on either a floppy, CD, or USB memory stick, and boot holding down Ctrl-Home and it will perform the recovery, but I've not been able to get this to work successfully. HP don't supply a standalone update so I've extracted the file from the BIOS update SP.exe on the HP support site.
Any help would be most appreciated!
Cheers,
Andrew
This question was solved.
View Solution.Brilliant idea - I tried AMIBOOT.BIN and that didn't work, but then took the Hex Editor to the file - it's HPBIOS.ROM
Renamed the file to HPBIOS.ROM and all now works.
To recap for anyone reading the thread, this was from an HP machine with a corrupt AMI BIOS, to get it back, extract the ROM file from the SP.exe file from the HP website, rename it from VLE5.22 (or whatever the file is that ends in a numeric) to HPBIOS.ROM and copy onto a floppy diskette. Put the floppy in the internal diskette drive (in my case a Sony OEM drive attached using a grey floppy ribbon cable) and boot the machine. You may need to hold down Ctrl-Home, but not 100% sure. After a long while the machine will give 4 or 5 beeps, and reset itself. Once it's done that it will boot normally.
Thanks for your help David - much appreciated.
Cheers,
Andrew -
DBACOCKPIT Connection for SAP systems with SAP Router
Hello!
We are trying to integrate all the remote SAP systems and their databases (primarily Oracle) into DBACOCKPIT of SAP Solution Manager 7.1.
Our SAP Solution Manager is running on Windows with Oracle 11.2.0.2
The most SAP systems (Unix and Windows) can only be reached from SAP Solution Manger over the SAP Router connection.
It means no direct ping from Solution Manager server to the Server of managed system will work.
Question
Is it possible to integrate such SAP systems (with SAP Router) into DBACOCKPIT of Solution Manager?
According to sap note 1265134 only the DBCON-connection will be required.
By doing so (tcode SOLMAN_SETUP), we get TNS errors.
Do we miss some additional steps (adapting tnsnames.ora of SOLMAN with the entry of managed system), etc.?
Thank you!
regardsSAP-SDN wrote:
> We of course can reach these systems via SM59.
>
> The question still is whether or not the several SAP systems with Oracle that can be reached from Solution Manager over SAP Router can be integrated into DBACOCKPIT of SAP Solution Manager in order to gather/ analyze performance data?
Systems can be reached via SM59, then what's the problem ?
In fact, this 'is' the standard procedure. This is as normal as you could have Solution manager in same 'network' with rest of the remote systems.
Answer should be yes, you can manage several remote sap systems from sap solution manager dbacockpit.
Thanks -
Deploy pre-compiled client proxy with a web service
When a web service is deployed on an OAS server, the page at the endpoint URL includes a link to a proxy jar file (<endpoint url>?proxy_jar). I have a proxy jar that I've built and I'd like to be able to include it in my war file so that the proxy jar URL will download it instead of the server-generated one. Is there a way to do that?
I did something similar with the wsdl file: I included it in the war file in the same folder and filename as the web service interface class, but that didn't work for the proxy jar file.
-PeterHi Peter,
You cannot replace the proxy jar generated by the Oracle Web Services runtime with your own version. If you want to provide your own version, you will have to handle it as a classic resource in your .ear file, and advertize the location of this resource using some other mechanism.
-Eric -
Test Connection fails for VC system of type Web Service
Hi All
I ve created a VC system of the type Web Service in Portal. In this VC system, I have given Url of the Enterprise Service that I want to use in VC.
(for eg: http://erp.esworkplace.sap.com/sap/bc/srt/wsdl/sdef_ECC_SALESORDER002QR/wsdl11/ws_policy/document?sap-client=800)
In the next step, I did user mapping for the VC user that will be consuming this Enterprise Service.
The system was created successfully but when I did Connection Tests , I got the following exception:
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Do I need to do any more configurations before I can use such ES portal system in my VC work studio ?
I understand that I have provided little information about the exception thrown by Portal.
I kindly request you to feel free in asking any other details about the same.
Regards
Kapil S KambleHi Natty
thanks for your immediate reply.
I followed your instructions and created iView of the type URL and set the fetch mode property to 'server side' as told.
Initially, I gave 'http://www.sap.com' as the Url and I was successful in opening the site.
Later, when I gave Enterprise Service url and tried to preview the iView, I got the following exception:
*'http://erp.esworkplace.sap.com/sap/bc/srt/wsdl/sdef_ECC_SALESORDER002QR/wsdl11/ws_policy/document?sap-client=800
Error # 401'*
I ll need to give username and password. But how do i give them as parameters?
Please note, these parameteres are appended to the Url. So, I fear that if url of Enterprise service is changed, then it wont open.
what do you think ?
Kapil -
EJB Deployment Problem for Stateless Session with Multiple ejbCreate
In weblogic server if I use multiple ejbCreate with different parameters it is found
to raise error with error message :
<Error deploying application cart:
Unable to deploy EJB: cart.jar from cart.jar:
In EJB CartBean, the stateless session bean class must define a single ejbCreate
method that takes no parameters.
at weblogic.ejb20.compliance.EJBComplianceChecker.check(EJBComplianceChecker.java:256)
at weblogic.ejb20.compliance.EJBComplianceChecker.checkDeploymentInfo(EJBComplianceChecker.java:220)
at weblogic.ejb20.ejbc.EJBCompiler.complianceCheckJar(EJBCompiler.java:453)
at weblogic.ejb20.ejbc.EJBCompiler.checkCompliance(EJBCompiler.java:410)
at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:203)
at weblogic.ejb20.deployer.Deployer.runEJBC(Deployer.java:296)
at weblogic.ejb20.deployer.Deployer.compileEJB(Deployer.java:676)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:843)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
at weblogic.j2ee.Application.addComponent(Application.java:160)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at ......
Code example...
public void ejbCreate() throws CreateException {}
public void ejbCreate(String person) throws CreateException {
// code here
public void ejbCreate(String person, String id) throws CreateException {
// code here
the code above is found ok in J2ee Ref. Implementation and able to deploy. Why this
is not deployable in Weblogic(tried in 6.1).is it a required condition for stateless
session bean
to have only single ejbcreate with no parameters ?
Can somebody explain? and is there a way out to overcome this constraint if so in
weblogic
with regards
Ganeshan KalembethStateless session beans may define only a single create() method with no
suffix
and no arguments.
Michael Jouravlev wrote:
"Ganeshan Kalembeth" <[email protected]> wrote in message
news:3ce28a88$[email protected]..
In weblogic server if I use multiple ejbCreate with different parametersit is found
to raise error with error message :
<Error deploying application cart:
Unable to deploy EJB: cart.jar from cart.jar:
In EJB CartBean, the stateless session bean class must define a singleejbCreate
method that takes no parameters.
atweblogic.ejb20.compliance.EJBComplianceChecker.check(EJBComplianceChecker.ja
va:256)
atweblogic.ejb20.compliance.EJBComplianceChecker.checkDeploymentInfo(EJBCompli
anceChecker.java:220)
atweblogic.ejb20.ejbc.EJBCompiler.complianceCheckJar(EJBCompiler.java:453)
at weblogic.ejb20.ejbc.EJBCompiler.checkCompliance(EJBCompiler.java:410)
at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:203)
at weblogic.ejb20.deployer.Deployer.runEJBC(Deployer.java:296)
at weblogic.ejb20.deployer.Deployer.compileEJB(Deployer.java:676)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:843)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
at weblogic.j2ee.Application.addComponent(Application.java:160)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at ......
Code example...
public void ejbCreate() throws CreateException {}
public void ejbCreate(String person) throws CreateException {
// code here
public void ejbCreate(String person, String id) throws CreateException {
// code here
the code above is found ok in J2ee Ref. Implementation and able to deploy.Why this
is not deployable in Weblogic(tried in 6.1).is it a required condition forstateless
session bean
to have only single ejbcreate with no parameters ?
Can somebody explain? and is there a way out to overcome this constraintif so in
weblogic
with regards
Ganeshan KalembethRTFM EJB 2.0 Spec, chapter 7.8
Maybe you are looking for
-
If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad by getting it off my iCloud?
-
MacBook hdmi lcd display - help needed!
Hi all, I'm connecting my MacBook to my 32" Vizio lcd via hdmi (using a mini-dvi to dvi adaptor & dvi to hdmi cable). When I mirror displays, one of two things happen: (1) either the Vizio display is too small and has black bars around it, or (2) the
-
Previously I bought an ebook and I keep its address in my favorite link, and it worked. However, after a year, when I click that link, abobe home appears and it seems to ask me to buy monthly services. How can I read that e book again? Thank you very
-
What SAP Business Objects Web Services to use with XI3.0
I'm new to BO and is tasked to install it. What I've installed already is the BOE XI3.0 version and now want to install Xcelsius 2008 Enterprise. What I can not figure out from the Xcelsius manual or SDN or OSS is what the Business Objects Web Servic
-
Undeploying BPEL Process Using ANT
All, I want to Undeploy a bpel process using an ANT script, is there any command for that? Its a bit urgent.