Deployment target

In my iphone ,pad universal application , i have set the minimum deployment target iOS 5.1 in xcode->target->genral->deployment target ios 5.1.
My interface builder documents are-
open in -xcode 5.0
Build for project deploment- default deployment target 5.1
view as- ios 7.1 and later.
I have to fix it's deployment target from lower 5.1 to higher 7.0, how we will do it .
Due to updation of ios 7 to ios 7.0.4, i am having trouble in app launch. Apple review team send us rejection issues like-
However, we found that your app exhibited one or more bugs, when reviewed on both iPad running iOS 7.0.4 and iPhone 5s running iOS 7.0.4, on both Wi-Fi and cellular networks, which is not in compliance with the App Store Review Guidelines.
please give us solution if it's possible to set the higher limit of deployment target for xcode 5.0.1 iphone,ipad application.
thanks.

Apple didn't appear to say anything about your deployment target. Apple said there were bug.

Similar Messages

What is the significance of the Assembly Deployment Target and Feature Scope?

Hello,
We have created a project as Farm Solution (not sandbox).
Under project properties we can see an option for Assembly Deployment Target : GAC or WebApplication.
I know that GAC will deploy the dll to windows\assemblies and WebApplication will deploy to website/bin folder.
Now, we add a feature to the project; in here we can see a dropdown for scope with options as: Farm; Web; Site; WebApplication. I know that depending upon what option is chosen; the feature can then be activated by going to the respective manage features
option via SharePoint front end UI.
Can you tell me what is the significance of the Assembly Deployment Target and Feature Scope?

>>Can you tell me what is the significance of the Assembly Deployment Target and Feature Scope?
Feature scope can be decided based on the type of artifacts you will be building
Check the below link for what type of artifacts can be build at different levels of scopes
http://msdn.microsoft.com/en-us/library/ms454835(v=office.14).aspx
wrt to Assembly Deployment Target depends on what type of components you are deploying through your solution which will be specified in manifest.xml. There are advantages
if you deploy the components to web application rather GAC like all Apppools will not get recycled, avoiding IIS reset etc. But if you have 3rd party dlls and feature receivers which need to deployed along with the solution then its advisable to deploy to
GAC
http://trentacular.com/2009/06/sharepoint-differences-between-global-and-web-application-targeted-solution-deployment/
https://www.captechconsulting.com/blog/james-brocato/sharepoint-without-the-gac
Hope this helps.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Change deployment target

Hi everybody,
I had OBIEE 11.1.1.7 deployed on Weblogic 10.3.6.
Later I added ODI 11.1.7 to the same domain.
I created a new server (odi_server1) which host ODI related deployments (odi_agent and odi_console).
Today I noticed odi_server1 also hosts all the deployments from OBIEE (ie anlytics, bioffice, bipubblisher, etc.).
I dont need / want these duplicate deployments, so I tried to retarget the deployments with weblogic.Deployer. ie
java weblogic.Deployer -adminurl http://localhost:7001 -user weblogic -password mypassword -name bioffice -deploy -targets bi_server1
as pointed out here here
but I get error "no source specified or operation".
Any clue about why I get duplicate targets?
How can I remove them?
Regards,
Corrado

Hi Corrado,
How did you add the new servers..? using domain configuration wizard, or have you used cloning..?
Regards,
Mohab

JMS sub-deployment targeted to cluster

Hello,
I have read at the Oracle documentation that we can use a sub-deployment within a JMS module targeted only to a single JMS Server. But I have an application that create JMS resources with deploy descriptors (Application modules) and target the sub-deployment to a cluster with two machines, each machine has a JMSServer. It seems to work (I see them on the JNDI tree on both machines). This is the jms.xml:
Do you also use sub-deployment targeted to a cluster or I shouldn't? Thank you in advance ;)
I am using webLogic version 10.3.4.0
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-jms xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-jms"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://xmlns.oracle.com/weblogic/weblogic-jms http://xmlns.oracle.com/weblogic/weblogic-jms/1.1/weblogic-jms.xsd">
     <wls:quota name="InboundMessageQuota">
          <wls:bytes-maximum>1000000</wls:bytes-maximum>
          <wls:messages-maximum>10000</wls:messages-maximum>
     </wls:quota>
     
     <wls:connection-factory name="InboundMessageConnectionFactory">
          <wls:sub-deployment-name>InboundMessage</wls:sub-deployment-name>
          <wls:jndi-name>jms.InboundMessageConnectionFactory</wls:jndi-name>
          <wls:security-params>
               <wls:attach-jmsx-user-id>false</wls:attach-jmsx-user-id>
          </wls:security-params>
     </wls:connection-factory>
     
     <wls:uniform-distributed-queue name="InboundMessageQueue">
          <wls:sub-deployment-name>InboundMessage</wls:sub-deployment-name>
<wls:delivery-params-overrides>
<wls:delivery-mode>Non-Persistent</wls:delivery-mode>
</wls:delivery-params-overrides>
<wls:delivery-failure-params>
<wls:redelivery-limit>0</wls:redelivery-limit>
</wls:delivery-failure-params>
          <wls:jndi-name>jms.InboundMessageQueue</wls:jndi-name>
     </wls:uniform-distributed-queue>
</wls:weblogic-jms>

Technically, cluster targeting a distributed destination is supported, and it'll work as long as your can be absolutely assured that the cluster will never host additional JMS servers - perhaps from future projects, or due to integrating third party products. Otherwise, your distributed destinations will end up creating instances on JMS servers where they don't belong - a common mistake that can be tough to diagnose and untangle. I highly recommend staying with the best practice of using a subdeployment that references exactly the intended JMS servers. Note that a subdeployment can reference more than one JMS server.
See [url http://download.oracle.com/docs/cd/E17904_01/web.1111/e13738/best_practice.htm#JMSAD455] WL JMS Configuration Best Practices
Hope this helps,
Tom

IPad Packager - iOS Deployment Target problem

Hello,
I've been working on an iPad app (using CS5), got everything in place, i.e. apple dev account, all my details cleared to sell apps, got my development app working great on my iPad.
BUT...
When I'm trying to upload the finished version using Application Loader I get the following message:
This bundle is invalid. When supporting iPad only, the iOS Deployment Target must be 3.2.
There is no way to set the deployment target in the flash CS5 settings, I've looked on various forums but can't find any answers to this. Can't believe I've got to this last step and I'm hit with this. Are adobe bringing any fixes out for this?
Any Ideas please???
cheers
K

Awesome -- I wish I could mark as "Answered" for this post -- Kevkong1971 I really really really appreciate being shown that post. Of course you can search and search but if you don't find the right one..... Well thanks..
I thought I would distill the answer and post again for those who need it. Here is the proceedure I followed (gleaned entirely from the work of others) And yes, it does work. I have both of my "iPad" only apps now up for Apple's review.
Here you go:
this is a copy and paste of something I popped up on my personal weblog---------
The following post addresses the “you must target a minimum of IOS 3.2” when you try to publish an app you’ve written with Adobe Tools and targeted “iPad Only”.
So thanks to the guys on the Adobe Forums, there are a lot of posts so I hope to distill it down for anyone who needs and also for myself (for future apps!)
Step 1: Copy your .IPA file to a MAC
Step 2: Rename file to .zip
Step 3: Extract contents of .zip
Step 4: Pull out the “yourApplication.app” file from the “Payload” folder you extracted
Step 5: Right click on .app file and select “show package contents”
Step 6: Edit the info.plist file
Step 7: Change the “MinimumOSVersion” entry to 3.2
Step 8: Close and Save
Step 9: Download THIS .PY Python script you will need to make your .xcent file authentic
Step10: write your .xcent file using pico or your favorite pure-text editor. Just create this file from scratch and name it yourApplication.xcent As Follows:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>application-identifier</key>
    <string>10DIGITCODE.YOUR.DOMAINAND.APPLICATIONNAMEHERE</string>
    <key>get-task-allow</key>
    <true/>
</dict>
</plist>
step 11: assuming the .py file you just downloaded and .xcent file you just created above are in the same directory execute the following in the terminal:
python gen_entitlements.py 10DIGITCODE.COM.YOURDOMAINAND.APPNAMEHERE yourAppName.xcent
OK So far so good. Now you have a valid .xcent file, and you have fixed your .plist. Now you have to put them together and resign with your credentials. To do this execute the following in your terminal:
/usr/bin/codesign -f -s "iPhone Distribution: YOUR NAME" "--resource-rules=/Users/yourusername/Desktop/yourAppName.app/ResourceRules.plist" --entitlements "/Users/yourusername/Desktop/yourAppName.xcent" "/Users/yourusername/Desktop/yourAppName.app"
Note: The “iPhone Distribution: YOUR NAME” needs to match your distribution certificate in your keychain. Open KeyChain and make sure you type it exactly as it is in there.
step 12: Right click the .app file and select “compress”
step 13: upload your app!!!
Hope that helps someone!!
Cheers,
Tommy

Xcode 4.6 minimum supported deployment target

Hi there.
Before updating to xcode 4.6 i want to ask if 4.3 is still the minimum supported deployment target for iOS.I dont want to be suprised afte updating.
Thank you.

For reference: Xcode Versions ~ iOS - As of 1.28.13

Lowering deployment target of an existing iOS app

I am wondering if it is possible to lower the deployment target of an existing iOS app in the app store.
We want the initial release of our app to only target iOS 7+ users. We would then take time to ensure the iOS 6 version was up to par and ideally would be able to submit an update that lowers the deployment target to support iOS 6+ users.
Does anyone know if this is possible? My collegue is concerned that the update will be rejected because of a past experience where he tried to narrow the supported devices from "Universal" to just "iPhone".

I don't see why there would be a problem other than the code required to make it work.
I'd like to see a verbatim copy of your friend's message from Apple because I also don't see why dropping support for some devices would cause rejection.

Use of Build Specifications for TestStand deployment Target

Hi everyone,
I currently use NI Internet Toolkit in one of my VI to build a code module for TestStand.
The matter is that de deployment target doesn't have the NI Internet Toolkit.
So I would like to build the VI in such a way the deployment target wouldn't need the Toolkit to use the VI.
Does anyone knows a way to that ?
Thanks to all...
Solved!
Go to Solution.

I got some matter with my outputs types (string array):
- It generates an error while creating the dll with .NET interop.
- Couldn't manage with share library .dll cause of array bounds couldn't be specified (array of array of char).
Thus I just change my data type to be of simple types, and it working quite well...
Thanks to Mr Dennis Knutson !

One off deployment target in ATG 10 Merch-Ui

Hi All,
We have migrated our application from ATG 9.3 to ATG 10.2
We had configured One-Off deployment targets in the Merchandising landing page but after migrating our application to 10.2 we can no longer see One-Off deployment targets in the Merchandising landing page.
Can you please let us know how can we configure the same in ATG 10.2?
Moreover, we had created additional custom tabs for certain set of assets (for ex: products) to be accessible via Asset editor page but the custom tabs are also not available in the asset editor page.
We can see that the viewMappings have been configured in the ViewMappingRepository but the custom tabs are not visible in the UI.
Is there any other customization we need to perform for above mentioned issues?
Can you please let me know incase anyone has faced such issues and what could be the possible resolution for it?
Thanks in advance\
Gaurav

Thanks for the reply Gareth,
I went through the doc mentioned and it clearly says that "One-off deployments can be launched at any time from an ATG Content Administration project".
But as per our project requirement we had drop-down for One-Off deployment target in ATG 9.3 Merchandising landing page itself.
Same requirement is to be met in ATG 10.2, however One-Off deployment target drop-down is not available in Flex-UI based Merchandising landing page.
And in the Constraints section following is mentioned:-
• A one-off target site is not available for deployment assignments in a workflow. In order to make that site available for workflow deployments, you must delete the target and recreate it.
So if follow this step and make site available for workflow deployment, it would defeat our purpose of deploying the project to One-Off deployment target.
I hope I have cleared my point.
Do let me know incase you can throw some light on issues mentioned above.
Thanks\
Gaurav

Unable to deploy target module

Hi,
if I open Control Center Manager and try to deploy a module it fails.
Looking at logs i find
2008/01/06-23:46:34-CET [15D17D7][OWB1.OWB1] Attempting to create adapter 'class.Oracle Database.11.1.DDLDeployment'
2008/01/06-23:46:37-CET [15D17D7][OWB1.OWB1] java.sql.SQLException: Eccezione IO: The Network Adapter could not establish the connection
I have no idea why.
I can log on directly to the target schema.
If I edit the location and press "test connection" it works.
Oracle 11 running on Windows Vista on a single developement machine .
Kind regards,
Corrado

Hi Oleg,
that's OK, but I'm currently using an all-in-one developement machine.
I've Oracle 11 server with OWB on a single Vista computer.
So I should have a single tnsnames.ora.
Anyhow I noticed there's a second tnsnames.ora.
Despite the "good one" in ORACLE_HOME\network\admin there's a second one in ORACLE_HOME\owb\network\admin, filled with references to what seems oracle developement machines.
Here it is
# TNSNAMES.ORA Network Configuration File: d:\oracle\905228\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
dwlin165.us.oracle.com =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dwlin165.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ora1010.us.oracle.com)
DWSUN42 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = dwsun42)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dev920.us.oracle.com)
dwlin12 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = dwlin12)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = iasdb.dwlin12.us.oracle.com)
ORA1010 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = stadq33.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ora1010.us.oracle.com)
Hope OWB isn't using this... :(
Kind regards,
Corrado

RT, When deploying, target screen fills with hex (?) codes and target becomes unresponsive.

When I try to deploy a realtime VI the target freezes and the target screen shows a bunch of unmeaningful hex codes. This does not happen all the time.
When I step into the VI the problems occur the first time the timed-loop tries to run.
Any thoughts?

I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42)

Assembly Deployment Target : WebApplication

Hi all,
i have a Empty SharePoint Project without anything, I change on the project properties the: Assembly Deploymnet Target to WebApplication.
Now I publish the solution to c:\ drive and I add the solution :
$SolParameters = [PSCustomObject]@{
      Identity = 'SP_WebApplicationV3.wsp'
      Literalpath = 'C:\SP_WebApplicationV3.wsp'
      WebApplication = 'http://srv2013/'
Add-SPSolution $SolParameters.Literalpath
I can Add the Solution.
No I want install the solution:
Install-SPSolution -Identity $SolParameters.Identity -WebApplication $SolParameters.WebApplication -Force
and I get following error:
Install SPSolution: The Solution "sp_webapplicationv3.wsp" assemblies installed in the directory "bin". The "bin" directory is
outdated, and installed in this directory assemblies are no longer partial trust, but they are full
Trustworthiness granted. This solution should be updated so that their assemblies in the global assembly cache instead
(GAC) to be installed. If you install fully trust this solution and it continues in the legacy directory "bin"
want to give the "-FullTrustBinDeployment" parameter to suppress this warning.
Line: 1 Char: 1
+ Install SPSolution -Identity $ SolParameters.Identity -WebApplication $ SolParamet ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     + Info Category: InvalidOperation: (Microsoft.Share ... Install Solution: SPCmdletInstallSolution) [Install-SPSolution], SPC
    mdletException
     + FullyQualifiedErrorId: Microsoft.SharePoint.PowerShell.SPCmdletInstallSolution
can anyone maybe help me?
thanks in advance!
Best regards
Ahmad
SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

I found the solution:
add -FullTrustBinDeployment to the Install-SPSolution:
Install-SPSolution -Identity $SolParameters.Identity -WebApplication $SolParameters.WebApplication -FullTrustBinDeployment
-Force
SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

Multiple Deployment Targets and Performance

Hi,
We have several apps. deployed to a managed server. Then I was asked to create a second manageed server instance on the same host. I deployed all apps. to this new managed server (as well as keeping it deployed on the original managed server).
In looking at the performance monitor, it seems that the original managed server is taking most of the hit. Do I need to shutdown and restart the servers to see a more even distribution?
Thanks,
Paul

Just try it, it's easy enough and quicker than waiting for a response to your question. :)
Tell us if it worked though!

Error RTC-5346 in registering target location in OWB Deployment manager.

Hello!
Dear experts, I've got DB 10GR2 and I downloaded OWB 10.1. I've installed OWB successfully and began to look through the samples. And during my trying to register a target location (when I looked through the sample "Deploying targets") Ive got an error : RTC-5346 :the oracle database location 10.1 is not equal to target version 10.2. As I mentioned before, my DBs version is 10.2 and OWBs version is 10.1. May be it is the matter?
So, what would you suggest me in such a situation? Do I have to fulfill any patches or something like that?
Thanks in advance,
Alexey.

Detlef,
your right. Apparently, the information I got only applied to OWB 10g versions 10.1.0.2.0 and 10.1.0.3.0 which are not certified against an DB 10g R2, because of BUG 4537766...
For 10.1.0.4.0 there is indeed no problem.
Grtz.
Philip.
Message was edited by:
[email protected]
Message was edited by:
[email protected]

Deployment error with LabVIEW 8.0 using a Desktop PC as a RT Target

Hello!
I am attempting to use LabVIEW Real-Time 8.0 with a desktop PC as the RT Target.
Everything appears fine when I look at the computer using MAX. I can fiddle with the Target’s IP, install software and transfer files between my Windows machine and the RT machine without any difficulties.
To get started with LabVIEW I have followed the instructions in NI’s document: "Getting Started with the LabVIEW Real-Time Module".
( A copy may be found at this location: http://www.ni.com/pdf/manuals/371375a.pdf )
My difficulties arise under the "Creating a Real-Time Project and Application" subsection, which begins on page 8 of the document.
I follow the instructions to create a project using the Real-Time Project Wizard and all goes well – I can connect to the target without issue in LabVIEW and monitor its performance with the Real-Time System Manager – until I try to deploy and run the VIs on the RT Target.
The deployment process fails nearly without exception every time I try to deploy any of the dependent VIs using the Project Explorer (I say nearly because maybe 1/100 times a VI is deployed successfully). I believe all the permissions have been properly set (in both LabVIEW and Windows) to allow the host and the target to communicate and collect data so I am not sure what the problem is.
Interestingly enough, VILIB dependencies always deploy successfully -- And the intrigue does not end there! If I build a standalone Real-Time application (like that detailed on pages 18-21 of the manual linked above) I am able to deploy to the RT Target. Setting the application to run on startup, the RT computer successfully reboots and is able to generate a sine wave and I can view using the host VI on My Computer.
I would like to be able to build and deploy VIs freely using the Project Explorer but am not sure how to achieve this seemingly simple goal. If anyone has encountered a problem similar to mine even feels that they know if the problem is related to hardware or software the help would be much appreciated.
Thanks,
Tom

Bob,
My System uses Windows XP. I use MAX 4.0.0.3001 to install software on the Real-Time computer. I am using LabVIEW 8.0 to deploy VIs to the Real-Time System. Also, if its any help, I am a D-Link DGE-550T Gigabit Ethernet Adapter.
The Remote System uses LabVIEW Real-Time 8.0. Note that a fair amount of software to add functionality to the system has also been installed here from My System via MAX.
Here is an example of how my Deployment fails:
I follow the instructions in "Getting Started with the LabVIEW Real-Time Module" and create a project using the Real-Time Project Wizard. (The contents of such a program may be viewed in a picture that is included in the ZIP file I have attached.)
I open the LVPROJ window and proceed by connecting to my RT device. I right click on the target and choose 'Connect'.
A Deployment window will pop up and display the following text:
Deploying RT (successfully deployed target settings)
I close the window and proceed to deploy my primary VI titled 'target - multi rate - variables - fileIO.vi. I right-click on the target and choose to deploy. Again, a deployment window will pop up - this time with the following text:
Deploying My Computer
Deploying variables - network - RT.lvlib
Deploying variables - network - RT.lvlibistop \\192.168.1.2\ variables - network - RT\stop.
Deploying variables - network - RT.lvlibidata \\192.168.1.2\ variables - network - RT\data.
Deploying RT (successfully deployed target settings)
Deploying support - acquire data.vi (3.20K)
Deploying Trim Whitespace.vi Failed to download Trim Whitespace.vi
The deployment usually, but NOT always, fails on Trim Whitespace.vi. In any case, the deployment will always fail for some VI and continue to fail in the same manner until My System is rebooted. Attempting to individually deploy any of the VIs also fails the vast majority of the time and if any VI fails it will continue to do so (...until a hard reboot, in which case it may or may not fail assuredly).
Attached to this post is a ZIP containing all the files associated with this RT Project (not including the libraries of dependencies associated with LabVIEW, of course).
If you feel that more information about hardware or software in use would be useful, please ask.
Thanks,
Tom
Attachments:
LabVIEW RealTime Project.zip ‏193 KB

Deployment target

Similar Messages

Maybe you are looking for