Deployment Wizard Not Allowing Certificate Update

Hey, everyone!
I needed to add new SANs to our Lync Server SSL (ucupdate-r2 subdomain for Polycom CX700 with old firmware). I logged into our GoDaddy account and I requested the new SAN. I validated it through email and then downloaded the CRT file.
I then launched the Deployment Wizard and chose to rerun the "Request, Install or Assign Certificates." In Certificate Wizard, I select Import Certificate and select the new GoDaddy SSL. It imports just fine. Next, I select the Default Certificate
and then Assign. The new SSL doesn't appear in the list of available certs, though.
I don't know if the server is just confused since they're technically the same cert but with a couple extra SANs.
So I launched MMC and went looking for the newer version of the cert. It wasn't there, so I imported it into Personal > Certificates, which is where the previous certificate is located. It imported fine, except the new one doesn't have indicate that a
"private key corresponds to this certificate."
I still relaunched the Certificate Wizard from the Deployment Wizard, but the cert is again now listed.
I'm not sure what to try now.
Could someone please help?
Thanks!
-Eric

Hi,
Check if
you have the proper Certificate Chain for GoDaddy specially the intermediate
CA.
Last week
I renewed a GoDaddy cert and the intermediate CA changed.
David

Similar Messages

HT4972 Why 2nd generation IPod Touch is not allowed to update with newer IOS?

Why 2nd generation ipod touch not allowed to update its OS to IOS 5 or later? This limitation made that IPod more or less useless as updated apps cannot be installed.

Be sure to backup your current apps. They can not be downloaded again, Earlier iOS apps are becoming increasingly difficult to find. You may want to look at VintApps, new in the Apple app store, that makes this much easier.
https://www.facebook.com/VintApps313
Although there are thousands of available apps to choose from, they will definitively not be the latest greatest.
I wrote my 99 cent app specifically to help solve this kind of problem. I need to add that "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Windows tells me "an unknown program wants to change this computer; windows does not allow firefox updates to complete.

What can i do about this problem? I click "more details" and find out that the 'unknown program' is firefox. I click to install; but windows does not allow the updates to complete. I let the update window run for over an hour one day... it still did not complete.

Check that you do not run Firefox as Administrator. 
Right-click the Firefox desktop shortcut and choose "Properties". 
Make sure that all items are deselected in the "Compatibility" tab of the Properties window. 
* Privilege Level: "Run this program as Administrator" should not be selected 
* "Run this program in compatibility mode for:" should not be selected 
Also check the Properties of the firefox.exe program in the Firefox program directory.

Sharepiont Content Deployment Wizard not working on SP 2013

Hi, I was wondering if someone else has come across this issue. I was trying to use the SharePoint Content Deployment Wizard on SharePoint 2013. However, when I launch the product, I receive the following error: "SpContentDeployment
Wizard has stopped working". Is there anything i can do in this case to get the sofware to work in my environment? Here is the output from the details section:
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: spcontentdeploymentwizard.exe
Problem Signature 02: 4.0.1.0
Problem Signature 03: 4ba7fc57
Problem Signature 04: SPContentDeploymentWizard
Problem Signature 05: 4.0.1.0
Problem Signature 06: 4ba7fc57
Problem Signature 07: f7
Problem Signature 08: f1
Problem Signature 09: System.IO.FileNotFoundException
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 4105
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=190175
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
thanks,
Sherazad

Hi,
You can download the source code from codeplex, then build the solution.
If the issue still exists, you can debug the source code or you can post the issue to the
ISSUES, you will get more help and confirmed answers from there.
http://spdeploymentwizard.codeplex.com/workitem/list/basic
Best Regards
Dennis Guo
TechNet Community Support

Will not allow iOS updates

will not allow iOS updates

If you mean that you don't have a Settings > General > Software Update option on it, then that only appears when you have iOS 5+ installed, if you have iOS 4 as your tagline suggests then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases if you are on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
An iPad 2 will update to iOS 6.0.1 (which is the only version that is 'signed' by Apple for it), so you will lose the built-in YouTube app and the Maps app will change.

Not allowed to update apps. Why?

My App store on my Iphone does not allow me to update my apps all of a sudden.I used for a year already and one morning it tells me I have to go to my Swedish store "Your account is not valid in the US store, you must switch to the Swedish store before purchase". What went wrong and what can I do to update my apps?
Thank you for your help.

Forum software glitch regarding the automatic TimeOutLength of ±30 minutes - affects only posting a new question as a Reply has a facility to reset the TimeOutExpiration automatically. Try again - ÇÇÇ

Will not allow app updates on iPad2 and iPhone4s but will allow new apps

Updated iPad 2 and iPhone 4S. But it will not allow me to update existing apps. Does anyone know how to help? Thanks

Nope... Just joking what you could try to do is reboot the device hold off button and home button for about 5 seconds. If it doesn't work then go on to iTunes and make a back up of the device and then go to setting>general>reset (at the bottom of the page)>erase all content and settings.. Then once that has happened go on to iTunes and reinstall the backup..
Thanks Dan

Changed my email at iTunes, now phone will not allow apps updates

changed my email at iTunes, now phone will not allow apps updates

Hello rblacktx,
If you changed your Apple ID (which is an email address), then you should be able to sign out of your iTunes Store account and sign back in with the updated information. Take a look at the resources below:
Change your Apple ID - Apple Support
http://support.apple.com/en-us/HT202667
Sign in with a different Apple ID on your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT203983
Have a great day,
- Judy

Do not allow insert update or delete of records

hii
i have a status field which when set to X should not allow any dml on that record (ie should disable those records whose status field is X )
how do i do it ?
plzz help me
mandar

Hii
i did the following in the pre_record trigger
if (:candidates.status='T')then
--set_block_property('candidates',insert_allowed,property_false);
set_block_property('candidates',update_allowed,property_false);
set_block_property('candidates',delete_allowed,property_false);
else
--set_block_property('candidates',insert_allowed,property_true);
set_block_property('candidates',update_allowed,property_true);
set_block_property('candidates',delete_allowed,property_true);
end if;
is there any problem with this code
(it is working fine for me ?
what is the difference if i write it in when new record instance ?
plzz help me
mandar

MacBook Pro randomly shutting down, but not allowed to update

Hello, I have a MacBook Pro 13 inch and it just recently has started shutting down at very random times. I saw another discussion about downloading an update to fix it, but when I went to download the update it said that my computer did not need the update. Any suggestions/help???

“If your MacBook is shutting down intermittently, please contact AppleCare for service.”
Good luck,
Clinton

Custom Report - Show Deployed, But Not Installed, Security Updates

I'm trying to create a custom report that will show all patches that have been deployed, but have not been installed for a particular collection. Any ideas?

Answered my own question.
This will pull all Security Updates that have been Deployed but are still Required (not installed) for the All Systems collection (SMS00001). You can directly modify the code to limit it to the All Servers or All Workstations depending on your site code. You
can also change the CategoryInstanceName filter to see different Update Classifications.
select distinct
sys.Name0,
ui.BulletinID as BulletinID,
ui.ArticleID as ArticleID,
ui.Title as Title,
catinfo.CategoryInstanceName as Vendor,
catinfo2.CategoryInstanceName as UpdateClassification,
CASE ((ui.IsDeployed))
When 0 Then 'No'
Else 'Yes' End as 'Deployed',
CASE((ui.Severity))
When 2 Then 'Low'
When 6 Then 'Moderate'
When 8 Then 'Important'
When 10 Then 'Critical'
Else 'NA' End as 'Severity'
from v_UpdateComplianceStatus css
join v_UpdateInfo ui on ui.CI_ID=css.CI_ID
join v_R_System sys on css.ResourceID=sys.ResourceID
join v_ClientCollectionMembers ccm on ccm.ResourceID=sys.ResourceID
join v_CICategories_All catall on catall.CI_ID=ui.CI_ID
join v_CategoryInfo catinfo on catall.CategoryInstance_UniqueID = catinfo.CategoryInstance_UniqueID and catinfo.CategoryTypeName='Company'
join v_CICategories_All catall2 on catall2.CI_ID=ui.CI_ID
join v_CategoryInfo catinfo2 on catall2.CategoryInstance_UniqueID = catinfo2.CategoryInstance_UniqueID and catinfo2.CategoryTypeName='UpdateClassification'
where css.Status=2
and ccm.CollectionID='SMS00001'
and ui.isDeployed=1
and catinfo2.CategoryInstanceName='Security Updates'
and catinfo.CategoryInstanceName = 'Microsoft'
order by sys.Name0, ui.ArticleID
select distinct
sys.Name0,
ui.BulletinID as BulletinID,
ui.ArticleID as ArticleID,
ui.Title as Title,
catinfo.CategoryInstanceName as Vendor,
catinfo2.CategoryInstanceName as UpdateClassification,
CASE ((ui.IsDeployed))
When 0 Then 'No'
Else 'Yes' End as 'Deployed',
CASE((ui.Severity))
When 2 Then 'Low'
When 6 Then 'Moderate'
When 8 Then 'Important'
When 10 Then 'Critical'
Else 'NA' End as 'Severity'
from v_UpdateComplianceStatus css
join v_UpdateInfo ui on ui.CI_ID=css.CI_ID
join v_R_System sys on css.ResourceID=sys.ResourceID
join v_ClientCollectionMembers ccm on ccm.ResourceID=sys.ResourceID
join v_CICategories_All catall on catall.CI_ID=ui.CI_ID
join v_CategoryInfo catinfo on catall.CategoryInstance_UniqueID = catinfo.CategoryInstance_UniqueID and catinfo.CategoryTypeName='Company'
join v_CICategories_All catall2 on catall2.CI_ID=ui.CI_ID
join v_CategoryInfo catinfo2 on catall2.CategoryInstance_UniqueID = catinfo2.CategoryInstance_UniqueID and catinfo2.CategoryTypeName='UpdateClassification'
where css.Status=2
and ccm.CollectionID='SMS00001'
and ui.isDeployed=1
and catinfo2.CategoryInstanceName='Security Updates'
and catinfo.CategoryInstanceName = 'Microsoft'
order by sys.Name0, ui.ArticleID

Unable to Open .pdf and not allowed to update the Reader

I work for a State Agency that sends out .pdfs created with Adobe Acrobat Pro 9 to other State Agencies as an email attachment.
We put security on the .pdf allowing only printing of the document.
We have been doing this for years with no problems; however, we recently added a new branch of agencies to receive them. Many of these agencies are unable to open the .pdf.
I suggested they update to the Reader X, but they say they are unable to update the Reader because, "Our IT department does not have the capability to upgrade my adobe without it affecting the daily operation of my case management system." Apparently, they have lots of forms that they will be unable to use if they upgrade.
So, my question is: Is there some other way the agencies can view and print the .pdf we are sending to them?
Thank you so much for your help!

Wendy7390 wrote:
When they try to open the .pdf, they get an error message that says the file is damaged. I have not gotten a more detailed error message than that.
That could be enough.
Some email systems use encoding on files to make the transfer a little faster. When they are decoded at the receiving end, they can become corrupt.
One way to test if this is the issue would be to Zip the file first, email it, and see if they can unZip the file and open it. If that works, then encoding is the problem. Not sure what can be done about that other than to Zip all files or post the files to a server and send them a link.
I also seem to remember a conversation a long time ago about some newer files not being readable in Reader 5 and it tossed up that same error message but unfortunately, I'm depending on memory for that one and can't seem to find that old thread.
But try a testing a Zip file and see if that works first.

Not allowing to update RG23A part 1

Hi All,
I have done a GR with capturing the excise. but after this i captured the excise with J1IEX, reference to GR, but when i am going to update the excise register with T-code: J1i5 with reference to GR (material document), system showing the message "List contain no item".
and now allowing me to upated the part 2 register (post excise)
but if I capture the excise while doing the GR, it is capturing and allow me to post excise.
Thanks
Pankaj Garg

hi
plz check the dates and Classification ROP
also check other data and try using the Material doc no
regards
kunal

Changing one instance of a recurring meeting does not allow an update to be sent to all attendees

The Outlook Community seems to think this an Exchange problem, although I'm skeptical:
Have a user that is executive admin, handles many calendars and sets up many recurring meetings that have several attendees. It would appear that occasionally something "wonky"
is going on with one or two of them. The behavior is sporadic not constant across all recurring meetings.
What happens is this:
1) User creates a recurring meeting on HER personal calendar, and invites 4 sometime more attendees (some within our domain
others outside our domain)
2) User sends out meeting request and people accept request. New recurring meeting is added to their calendars.
3) Time passes sometimes months.
4) An attendee of the recurring meeting can't make the normal time and request that the meeting time be changed for THAT SINGLE OCCURANCE, of the meeting, just that one time, all remaining
occurrences of the meeting should remain in their normal time slots.
5) User opens up the recurring meeting on her calendar. Chooses "Open this occurrence" (not open the series)
6) Meeting shows that she is still the organizer. User changes the time of the meeting.
7) User only has the option to SAVE & CLOSE the meeting, there is no "SEND UPDATE" button to notify all the other attendees that this occurence of the meeting has had it's
time changed.
8) If user clicks SAVE & CLOSE, the meeting DOES change on her calendar but again no notification goes out to any other attendees and of course meeting time remains the same old uncorrected
time on their calendars.
In a nutshell, where is the SEND UPDATE button, it is missing from this meeting entry.
All users are using Office 2010 some (some with SP1)
Exchange environment (Exchange Server 2007 Service Pack 3 Rollup 8V2)

Hi Vtcrusade,
Attendees only receive the notification when meeting organizer update the meeting request.
If she is the meeting organizer, she should have Send UPDATE button.
Thanks,
Evan
Evan Liu
TechNet Community Support

I have been using OS X Lion until last night. Now using OS X Yosemite. But I am not allowed to update my iPhoto or iMovie. How can I fix this?

I have been using OS X Lion for years. Last night I updated to OS X Yosemite. Now I cannot update either my iPhoto nor iMovie. How do I fix this? Telling me to go to the Support at App Store is not helpful as they are oriented to my MacBook Pro and not toward the theft of my iPhoto or iMovie. Is there any way around the App Store mismanagement of AppleID for these applications?

What happens when you try to download the new iPhoto and iMovie? Do you get any message and if so what is it? What do you mean by "theft of my iPhoto or iMovie"? Who do you think stole them?
One trick to try is to move the iPhoto and iMovie apps to the Trash in the Dock but don't empty as yet. Then go to the App Store and try to download the apps again.

Deployment Wizard Not Allowing Certificate Update

Similar Messages

Maybe you are looking for