DeployTool deletes files and directories

Hi All,
I have been facing serious issues with the DeployTool, once on Windows 2003 and the other on Solaris 9.
On Windows 2003, while I was trying to deploy an EAR file using the DeployTool, the deployment failed. And it then subsequently not only deleted the WebAS files and directories but also the system files. I had to reformat the system and install WebAS 6.40 SP9 again on it.
Now on Solaris 9 (with WebAS 6.40 SP9), when I was undeploying an application using the DeployTool, then again it deleted some directories in the user home directories, including the user and WebAS profile and environment scripts. M still to get the system back in place.
Is this a known issue with the DeployTool and if yes what wud be the recommended way to proceed in either case?
regards,
Vishal

You probably should rename the files.
A * is specifically not allowed in a file name. What's happening is that the file is stored with the unicode representation of the character. Unicode-aware apps like the Finder can deal with this but most other apps (including the file sharing daemons) cannot and that's why you see the unusual file names.
You're going to run into all kinds of other problems, too. Renaming your files i the best bet.

Similar Messages

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

How to select file and directories to ZIP

HI,
I'm doing an application that would zip a file and directories. here's an exmple:
fileName = FileNameTest.csv
folderName = FileNameTest_A
folderName = FileNameTest_B
The foldername is taken from the fileName with "_A" and "_B" at the end. The file and directories are located in a directory where there can also be other files and directories in it. What I want to do is to zip only the above file and directories.
Any help will be greatly appreciated!
Thanks!

Not a very clear specification. What do you want the resulting zip entries/files/paths to look like?

File Chooser is displaying names of the Files and Directories as boxes

Hi All,
Actually i am working on an application in which i have the requirement to internationalize the File Chooser in All Operating Systems. The application is working properly for all languages on MAC OS, but not working properly for the language Telugu on both the Ubuntu and Windows OS. The main problem is, when i try to open the File Chooser after setting the language to TELUGU all the labels and buttons in the File Chooser are properly internationalized but names of Files and directories in the File Chooser are displaying as boxes.
So please provide your suggestions to me.
Thanks in Advance
Uday.

I hope this can help you:
package it.test
import java.awt.BorderLayout;
import java.awt.Frame;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.util.Locale;
import javax.swing.JButton;
import javax.swing.JDialog;
import javax.swing.JFileChooser;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
import javax.swing.UIManager;
* @author Alessandro
public class Test extends JDialog {
     private JFileChooser fc = null;
     private Frame bfcParent = null;
     public Test(Frame parent, boolean modal) {
          super(parent, modal);
          this.bfcParent = parent;
          if (fc == null) {
               fc = new JFileChooser();
               fc.setAcceptAllFileFilterUsed(false);
               fc.setLocale(Locale.ITALIAN);//i think you should use english
               //these are in telugu
               UIManager.put("FileChooser.openDialogTitleText", "Open Dialog");
               UIManager.put("FileChooser.saveDialogTitleText", "Save Dialog");
               UIManager.put("FileChooser.lookInLabelText", "LookIn");
               UIManager.put("FileChooser.saveInLabelText", "SaveIn");
               UIManager.put("FileChooser.upFolderToolTipText", "UpFolder");
               UIManager.put("FileChooser.homeFolderToolTipText", "HomeFolder");
               UIManager.put("FileChooser.newFolderToolTipText", "New FOlder");
               UIManager.put("FileChooser.listViewButtonToolTipText", "View");
               UIManager.put("FileChooser.detailsViewButtonToolTipText", "Details");
               UIManager.put("FileChooser.fileNameHeaderText", "Name");
               UIManager.put("FileChooser.fileSizeHeaderText", "Size");
               UIManager.put("FileChooser.fileTypeHeaderText", "Type");
               UIManager.put("FileChooser.fileDateHeaderText", "Date");
               UIManager.put("FileChooser.fileAttrHeaderText", "Attr");
               UIManager.put("FileChooser.fileNameLabelText", "Label");
               UIManager.put("FileChooser.filesOfTypeLabelText", "filesOfType");
               UIManager.put("FileChooser.openButtonText", "Open");
               UIManager.put("FileChooser.openButtonToolTipText", "Open");
               UIManager.put("FileChooser.saveButtonText", "Save");
               UIManager.put("FileChooser.saveButtonToolTipText", "Save");
               UIManager.put("FileChooser.directoryOpenButtonText", "Open Directory");
               UIManager.put("FileChooser.directoryOpenButtonToolTipText", "Open Directory");
               UIManager.put("FileChooser.cancelButtonText", "Cancel");
               UIManager.put("FileChooser.cancelButtonToolTipText", "Cancel");
               UIManager.put("FileChooser.newFolderErrorText", "newFolder");
               UIManager.put("FileChooser.acceptAllFileFilterText", "Accept");
               fc.updateUI();
     public int openFileChooser() {
          fc.setDialogTitle("Open File");
          fc.resetChoosableFileFilters();
          int returnVal = 0;
          fc.setDialogType(JFileChooser.OPEN_DIALOG);
          returnVal = fc.showDialog(this.bfcParent, "Apri File");
          //Process the results.
          if (returnVal == JFileChooser.APPROVE_OPTION) {
               System.out.println("Hai scelto di aprire un file");
          } else {
               System.out.println("hai annullato l'apertura");
          return returnVal;
     private static void createAndShowGUI() {
          JFrame frame = new JFrame("FileChooser");
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          JPanel jp = new JPanel(new BorderLayout());
          JButton openButton = new JButton("Open File");
          final Test test = new Test(frame, true);
          openButton.addActionListener(new ActionListener() {
               @Override
               public void actionPerformed(ActionEvent e) {
                    test.openFileChooser();
          openButton.setEnabled(true);
          jp.add(openButton, BorderLayout.AFTER_LAST_LINE);
          //Add content to the window.
          frame.add(jp);
          //Display the window.
          frame.pack();
          frame.setVisible(true);
     public static void main(String[] args) {
          //Schedule a job for the event dispatch thread:
          //creating and showing this application's GUI.
          SwingUtilities.invokeLater(new Runnable() {
               public void run() {
                    //Turn off metal's use of bold fonts
                    createAndShowGUI();
}bye ale

Deleted files and photos

If deleted files and photos even from the bin, is it possible in anyway to take them back without any cost issues?
Thanks

It may be possible to recover some erased ones, but you must quit using the Computer immediately, because the OS will think it can write to those freed blocks on the disk.
Either boot this one in Target mode...
http://support.apple.com/kb/HT1661
And recovering from another Mac, or booting this Mac from another HDD, then using Data Rescue...
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
rccharles on file recovery...
"Stellar Phoenix Macintosh - Mac data recovery software, recovers data from damaged, deleted, or corrupted volumes and even from initialized disks."
They have a trial version, so I guess you can see if your data can be recovered...
http://www.stellarinfo.com/mac-data-recovery.htm
FileSalvage is an extremely powerful Macintosh application for exploring and recovering deleted files from a drive or volume. FileSalvage is designed to restore files that have:
    * been accidentally deleted.
    * become unreadable due to media faults.
    * been stored on a drive before it was re-initialized/formatted.
http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1

Traversing files and directories underneath a directory

I'm looking at some sample code about traversing files and directories underneath a directory. I'm trying to understand exactly what the code is doing. I see that dir.list() is building a string array of filenames and directory names. Then it tests each to see whether it's a directory. If it's a directory then is looks and each file and or directory in that directory.
But I don't understand how it keeps going below just the second level directory. The two lines of code I'm not sure I understand are:
1) process(dir);
2) visitAllDirsAndFiles(new File(dir, children));
Can anyone help me to understand exactly how this code block can traverse beyond just the second directory level?
// Process all files and directories under dir
    public static void visitAllDirsAndFiles(File dir) {
        process(dir);
        if (dir.isDirectory()) {
            String[] children = dir.list();
            for (int i=0; i<children.length; i++) {
                visitAllDirsAndFiles(new File(dir, children));

No, I guess they might be assuming somethings. Here is the page with the sample code:
[http://exampledepot.com/egs/java.io/TraverseTree.html]

I have recently changed to an iMac from a Windows PC. How do I delete files and format the memory card in my helmet cam?

I have recently changed to an iMac from a Windows PC. How do I delete files and reformat the memory card in my helmetcam?

If you return the memory card to the helmetcam, it may choose to reformat it before use; back to some FAT-16 or FAT-32 format many of these third-party cards and cameras use. Unless you were going to use it for Mac OS X and format it with HFS+ or in a partition map for Mac data, etc.
If not, the easiest way to reformat the card may have been in the camera itself. I've formatted several kinds of camera cards, drives, USB flash drive, and others. The means varies with the intended purpose. Sometimes the default is the best; since it is platform neutral if the device is seen by both players.
Good luck & happy computing!

How to bundle all files and directories in a package?

how to bundle all files and directories in a package?
i plan to put all image files, .class files and some other files together.and then double click the package to execute the program.
should i use jar?is there a link for tutorial or example?
thanks in advance

http://java.sun.com/docs/books/tutorial/jar/

What files and directories are shipped with the Oracle Agent ?

Hi:
- Could someone please outline the intent of all the files
and directories that are shipped with the Oracle agent?
- I think this was documented somewhere but I cannot
recall where I saw this previously.
- Another question: if I wanted to add a logfile for my plug-in
(for debugging/troubleshooting)
under which directory should this logfile be placed ?
Thanks
John

http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/structure.htm#i1028189 should help you understand the directory structure of OEM Agent.

Listing Files and Directories

On our internal web page we have some links to various areas
like Office Forms, Safety, etc... The supervisors that maintain
these documents have access to shares that allow them add, remove,
and update the files as needed. Since the content in each changes
fairly often we're currently using CFDIRECTORY with the LIST action
to display the contents to the users on the web page.
Some of the areas now contain quite a few documents and the
supervisors would like to be able to group their documents in
subdirectories. I know I can I can use RECURSE="yes" to have the
web page list the contents of these folders, but the supervisors
would like the end users to see the subdirectories as well so
things are less confusing and cluttered on both ends.
So is there any way in CF to set up these pages so that
subdirectories can can be navigated and the documents selected? If
possible, I'd like something that can handle this dynamically so
that I don't have to constantly change the code every time a
supervisor decides to add/remove a directory.
We're currently running CF8 Standard.
Thanks!

Vidikron wrote:
> On our internal web page we have some links to various
areas like Office Forms,
> Safety, etc... The supervisors that maintain these
documents have access to
> shares that allow them add, remove, and update the files
as needed. Since the
> content in each changes fairly often we're currently
using CFDIRECTORY with the
> LIST action to display the contents to the users on the
web page.
>
> Some of the areas now contain quite a few documents and
the supervisors would
> like to be able to group their documents in
subdirectories. I know I can I can
> use RECURSE="yes" to have the web page list the contents
of these folders, but
> the supervisors would like the end users to see the
subdirectories as well so
> things are less confusing and cluttered on both ends.
>
> So is there any way in CF to set up these pages so that
subdirectories can can
> be navigated and the documents selected? If possible,
I'd like something that
> can handle this dynamically so that I don't have to
constantly change the code
> every time a supervisor decides to add/remove a
directory.
>
> We're currently running CF8 Standard.
>
> Thanks!
>
Pretty much what you got should do it. The simplest change
would be to
output entire directory structure on your current page, just
nesting the
files and directories.
I would just create a looping output that uses the fields of
the record
set to output the directories and the files with-in them
probably as a
nested set of <ul> unordered lists.
If you want to break up this user interface into distinct
units which
only list the contents of a current directory then just do
the output as
you have it without using recursion. But make the
sub-directory
listings links that when clicked repopulate the current page
listing the
contents of the selected directory.
Neither should take a great deal of rework to your current
interface.

I am trying to open space in my macbook hard drive, so I deleted files and after emptying the trash bin the amount of Gigs didn't increase, why? Where can I go and delete those files?

I am trying to open space in my macbook hard drive, so I deleted files and after emptying the trash bin the amount of Gigs didn't increase, why? Where can I go and delete those files?

Did you do a secure empty trash? SHIFT COMMAND DELETE, they will be over wriiten. Are you deleting docs as they aren't much space, videos,pictures,music use much more space.
You can move those fiels to an external "archive" drive to save them then delete them from your internal drive.

Document containing the SAP Files and Directories

hi,
Pls let me know the link where i can get the file and directories of location of all sap files such as disptacher logs, profiles etc

Dear Balaji,
Run transaction Al11.
There you can see the directory structure of SAP files.
Regards,
Arun
PS: Reward points are welcome

My Macbook Air can delete files and folders and take them to Trash Can but cannot delete from Trash Can . Cannot empty trash securely.

My Macbook Air can delete files and folders and take them to Trash Can but cannot delete from Trash Can . Cannot empty trash securely.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

[Solved] File browser that supports mixed files and directories

Are there any file browsers that show files and directories together, in the way that macs do? Most of the time I like the seperated structure, but for some things I'd like to be able to sort by, say, date modified, and have all the newest files and directories together. I'm hoping I'm just overlooking an option somewhere (I'm using nemo now), but this is kind of a tricky thing to google.
EDIT
Just looked again and noticed the option, right there in front of me. Oops. Still, andyone happen to know how to make this a property of a single directory, and not global?
Last edited by ce1984 (2014-04-25 02:05:16)

ls - just don't use
--group-directories-first

I want to delete files and settings iPhone, but ask me a key and I have no the key

I want to delete files and settings iPhone, but ask me a key and I have the key

If you don't remember the restrictions passcode, you will have to put the phone into recovery mode and restore it as a new device. Do NOT restore from your backup. The restriction settings are part of the backup.

DeployTool deletes files and directories

Similar Messages

Maybe you are looking for