DeployWebGate is not created after installing OHS webgate on Solaris sparc

Hi frends,
I am having trouble installing an OHS webgate 11.1.1.5 on Solaris sparc 64 bit. The install goes through OK and everything looks like it works however I don't have deployWebGate folder in webgate/ohs/tools/ so I can't do any configuration.
There are no errors in the install log !
Any help urgent.
Thanks

Hi,
Can you provide the name of the WebGate installation executable that you are running? Also, do you see a "deployWebgate" (lower case "g") directory under webgate/ohs/tools ?
Regards,
Colin

Similar Messages

  • PE 9 will not load after installing Elements 10

    Installed Elements 10 on Vista 64-bit.  Did not uninstall Elements 9.  Now PE 9 will not load; get window Adobe Premiere Elements.exe - No Disk.  There is no disk in the drive. Please insert a disk into drive\Harddisk2\DR2.  Tried disk 2 of 3 from package, nothing happens.

    Tried twice, PE9 still locked up both times - I think the intent is to have me try PE10, because that did work!!!
      From: Steve Grisetti
      Sent: Monday, January 02, 2012 7:09 PM
      To: cptiger
      Subject: PE 9 will not load after installing Elements 10
            Re: PE 9 will not load after installing Elements 10
            created by Steve Grisetti in Premiere Elements - View the full discussion

  • HT201366 CAC readers not working after installing security update 2013-003?

    Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

    For CAC issues, see:
    MilitaryCAC's Mac OS X support landing page
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
    Have you tried deletting the plists for MAS?
    This page might help you out...
    http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
    Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
    Let me know how you get on?
    Thanks.

  • Not working after install

    macbook pro not working after install OS Mountain Lion

    Hey kennichols,
    Thanks for the question. Based on the information you provided, the following resources may help to resolve your issue:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Thanks,
    Matt M.

  • Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

  • Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

    Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
    The system shows everything is ok.
    Please any help greatly apreaciated.
    Thank you
    Valentin

    ValentinT, welcome to the forum.
    There are no drivers available for Windows 8.  I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected.  It seems that the Sound is one area that gets changed when updating to Win 8.1.  At least, this is what happened to me.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Photoshop CS4 will not launch after installing Yosemite.

    Photoshop CS4 will not launch after installing Yosemite. All the other CS4 apps open. I upgraded Java. Genius Bar could not get it to launch.

    Here's the fix I found, by way of an explanation...
    Snow Leopard prompted me on my first startup with the following error:
    "There is a conflict with the _______ font file. This font file contains a font name that conflicts with a system font required by Mac OS X to display onscreen text. You should move this font file to the Trash."
    The fonts it said were conflicting: Helvetica, HelveticaNeue.dfont, Lucida Grande, and Monaco. I figured Snow Leopard probably wanted to replace these fonts with newer versions, and so I clicked "Move to Trash" on all four.
    Apparently 10.6 trashed these fonts but didn't replace them. This was causing Photoshop to crash on load.
    So I restored my ~/Library/Fonts folder from a backup made just before upgrading and this time after a reboot I said "Allow Conflict" on all four dialog boxes and launched Photoshop... everything is back to normal!
    Not sure what kind of "conflict" it's referring to, but apparently moving these font files to the trash as OS X prompted me to do broke a number of apps. Should I report this as a bug?
    Thanks for the ideas!

  • MIGO should not create after PO Delivery Date

    Hi,
    We have a PO with multiple line items and diff. Delivery Dates...
    We want that during MIGO Process, Posting Date should not exceed to PO Delivery Date.
    Means, if PO Delivery Date is 05.07.2014, then MIGO should not created after this date...
    Please suggest.

    If you want to achieve the scenario with standard settings, then you can use the field "Latest GR date".
    Just put the same date as delivery date in this field. Then  system will not allow to do GR if the Posting date is exceed with compare this date in MIGO.
    You can find the latest GR date in Delivery tab in PO. Also you can maintain the field as mandatory in PO to avoid the field value blank as per your requirement.
    Also if you want to change Latest GR date along with delivery date, just take the steps which is explained in this document Mass changes from one field to another field.
    **Edited by: Dëv Päträ

  • How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8

    How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8 . I am using WaveMaker application for web development

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong

  • All the Google toolbar buttons(other then print) are not visible after installing Firefox 4

    Google toolbar buttons (other then print) are not visible after installing Firefox 4 for Mac.

    Yes - there is a fix... called IE9... http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages

  • Internet not working after installing "StarTech Thunderbolt Docking Station" driver

    My Internet is not working after installing "StarTech Thunderbolt Docking Station" driver although "Ethernet" and "wireless" say they're connected, still there is no internet.
    I have bought a "StarTech Thunderbolt Docking Station" as I need to use 2 thunderbolt based pieces of equipment on my "MacBook Pro"; which are a 2nd monitor as well as a Thunderbolt driven Audio Interface.
    When I first plugged all my equipment to the "StarTech Thunderbolt Docking Station" everything was working fine, all pieces of equipment worked as well as Ethernet from both the computer and the docking station were working perfectly.
    However, when I inserted the "StarTech Thunderbolt Docking Station driver CD" and installed the drivers, the internet on my computer has stopped working. Although the Ethernet says it is "connected" (same goes for "Thunderbolt Ethernet" when cable is connected to it) still the internet does not work. Even my wireless internet is not working anymore. Furthermore, also after installing the Docking Station drivers, my iTunes is crashing whenever started.
    Please help, this is really urgent.
    I've been looking for answers all around but can't seem to find any.
    I'm using OSX Mavericks 10.9.2
    I've tried fixing stuff with Network preferences, like changing IP address, renewing DHCP leace.
    I also tried typing IP address, Subnet Mask, Router and DNS Sever manually... Nothing seems to be working.
    Note: I know someone could suggest to "uninstall" the Thunderbolt Station driver, however, I can't find an "uninstallation file", even the CD that came with the docking station does not have it.

    I had exactly the same problem today, and I was lucky enough to solve it.
    Here's what helped me:
    First, I found a hint to Suspicious Package in this thread.
    With Suspicious Package installed, I was able to identify the script in StarTech's installer pkg. It' called "postflight".
    Amongst other things, postflight runs this command:
    sudo mv usr/share/sandbox/mDNSResponder.sb usr/share/sandbox/_mDNSResponder.sb
    A quick check in Apple's knowledge base revealed, that the mDNSResponder is essential to use DNS (i.e. to resolve server names like www.apple.com) and bonjour.
    I moved th mDNSResponder back to where it belongs:
    sudo mv usr/share/sandbox/_mDNSResponder.sb usr/share/sandbox/mDNSResponder.sb
    After a reboot, everything worked fine again.
    I have no idea, why StarTeck disables an essential tool. Let's assume it's an error ...
    But after this experience, I didn't want the StarTech ethernet driver on my machine (I had installed it just for curiosity, anyway - yes, I know, I shouldn't have ...), so I removed the kext the installer had copied to my system:
    sudo mv /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8 2580.kext /Users/myusername
    (You see I didn't delete the kext directly, I just moved it away and tried another reboot. Now everything works fine, so I'm going to delete the kext entirely and paint a big red cross on StarTech's installer disk.
    Hope this helps.

  • Wifi connection with 4s not working after installing new software ios6

    wifi connection with 4s not working after installing ios 6.

    Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
    Then go to Settings > General > Reset Network Settings  and try connecting again when the phone restarts.

  • Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"

    Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"
    provide solution.

    Well I didn't enter a hostname from my ISP, but I did need to enter as a Host Domain the sub-domain (CNAME) that we use for our server. Don't know all the proper terminology, but I hope that's clear enough to someone to help. As soon as I did that, it worked again.
    Thanks for the tip,
    W

Maybe you are looking for