Depoyed com.businessobjects.pct.masteriview.par but iview template missing
Hi
I have successfully deployed the com.businessobjects.pct.masteriview.par in Portal
I had taken the PAR file from the installation KIT folder of SAP Integration KIT
I have ONLY deployed the PAR and deployment was successful
I am using SAP EP 7.0 SP21
After the deployment I can not see the BusinessObjects Integration Kit -iView template in the iView creation template
I have refresh the browser, logoff and login number of times, clear the browser cache and history also.
Any suggestion what I need to do to get the BusinessObjects Integration Kit -iView template
Regards
Janak Mehta
Hi,
Do check the below forums for more details:
Do not see BusinessObjects Enterprise Integration Kit - iView template
IView Template Missing
Hope this may help you.
-Noor.
Similar Messages
-
BusinessObjects Portal Integration - iView Template Missing
Hello
I have installed my BusinessObjects for Portal as follows:
1. We already have BI 7.0 on SQL 2005 on BIDEMOSER SERVER.
2. Installed BusinessObjects Enterprise 3.1 , Crystal Reports 2008, SAP GUI 7.1 and SAP Integration Kit on this new server name : BODEMOSER.
3. We already have EP 7.0 on Oracle 10.2 on EPDEMOSER SERVER.
I have installed the BOE 3.1 and Integrated with the BI Server and imported the roles and all the functions are working fine between BO and BI.For Portal Integration i have transferred the masterview file from BODEMO SERVER com.businessobjects.pct.masteriview.par to the EPDEMOSER SERVER.
And it was uploaded in the EPDEMOSER SERVER System Administration--> Support --> uploaded successfully.And I have followed the SSO configuration as per te guide. And values in the Web.xml files are properly as per the guide.
After the uploading the masterview par file i could not able to view the iView template in the System.I have cleaned the cookes and all temp files.
As per the guide I have created an folde name BI_BO and SYstem name as BI_BO_DEMO.Now when I started creating a iView Template by right clicking the System name BI_BO_DEMO and provided the following parameters for each Property Category.
CRYSTAL Enterprise server:
Host Name of Crystal Enterprise Server : BODEMOSER.srv.com:8080
Path of Crystal Enterprise Server : /SAP
Protocol of Crystal Enterprise Server : http
User Management
Authentication Ticket Type : SAP Logon Ticket
Logon Method : SAPLOGON TICKET
User Mapping Fields
User Mapping Type
Connector
Application Host : BIDEMODER.srv.com
Gateway Host : BIDEMODER.srv.com
Gateway Service : sapgw00
Logical System Name : BIDCLNT001
Remote Host Type : 3
SAP Client : 001
SAP System ID : BID
SAP System Number : 00
Server Port
SNC Library Path
SNC Mode - Select -01
SNC Name
SNC Partner Name
SNC QOP (Security Level) : 0
System Type : SAP_BW
Trace Mode : 0
System Alias
Created a System Alias as : SAP_BW
And tested the connection where it gives as
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Whether i should install the BO Integration kit in EP portal also or any Portal Inetgration kit is available.
Regards
BalaHi,
1. Whether Integration kit for SAP should be installed in EP Server also ( which has been installed in BO server for BI and the SSO for BI and EP STRUSTSSO2 also works fine.
- the portal is acting as the frontend for viewing content and yes there needs to be trust between your portal and your BW system
2. the connector parameter and the iview template object parameter as correct as per the distributed enviorment.
When i checked with portal; admin they asked doubt what should be crystal enterprise server ( BO) and the what is the server should connector parameter should have.
- the Crystal Enterprise parameter do not influence the connector properties and do not lead to the point that the connector settings fail. the Crystal Enterprise parameters are only relevant when viewing SAP BusinessObjects related content.
Make sure you connector settings work even without the Crystal Enterprise parameters first.
ingo -
Iview Template missing for Webdynpro-Java application
Hi All,
I wanted to create an iview out of my webdynpro component . I followed
the steps given in the following document ---
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0c7b2f25-0c01-0010-f2a2-f8a65a9dcad9
But unfortunately i couldn't find any template to create iview from webdynpro-java
application . Can any one help me out ? Is there any customization for the same or
this feature is not available for CE7.1--Sneak Preview version ? Any suggestion will
be of great help to me.
Thanks and Regards
AshisHi Ashis,
please refer to thread
Has anybody created Iview from "Webdynpro Java" component in CE7.1 ?
and by the way...there is a portal included under ../irj
greetings jens -
Hello Experts!
I've installed MDM 5.5 SP6 along with the portal content that came from the same download. The portal content files I installed are listed below.
BPMDMAPPLI06_0.sca
BPMDMTECHN06_0.sca
MDM_WEB_UI550.sca
MDMJAVAAPI06_0.sca
When I try to get a new MDM system I get the exception below. I've looked and searched the portal content and this iView (com.sap.pct.mdm.tech.systems.MDMSystemWizard) does indeed appear to be missing. Is there something else I need to install? The SCA files all deployed without errors.
Steps to recreate this error:
System Administration => System Configuration => Portal Content => (landscape directory)
=> Right-Click => New System (from template) => choose MDM System template => Next
Thanks,
John
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: iView not found: com.sap.pct.mdm.tech.systems.MDMSystemWizard
at com.sapportals.portal.prt.deployment.DeploymentManager.getPropertyContentProvider(DeploymentManager.java:1937)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:222)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)Restarting the J2EE engine resolved this problem.
-
Hi All,
I have a BI 3.5 System. I have Netweaver 2004s System. I am calling a BI query in Visual Composer. I want to save tableview details in PDF file. I am writing following formula for this.
"pcd!3aportal_content!2fcom.sap.pct!2fplatform-add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bexwebanalyzer?QUERY="& STORE@REPORTNAME & "&BI_COMMAND_1-EXPORT_FORMAT=PDF&BI_COMMAND_1-SHOW_EXPORT_DIALOG=X&BI_COMMAND_1-null="
When I deploy my VC application I get the output in Table. When I click on PDF button i get following error:
<b>Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: pcd:portal_content/com.sap.pct/platform-add_ons/com.sap.ip.bi/iviews/com.sap.ip.bi.bex.
Exception id: 05:22_06/03/07_0035_3677550
See the details for the exception ID in the log file</b>
Thanks & Regards,
sheetalHi Sheetal,
did you check the logifle? - You can also have a look into the NetWeaver Administrator for the log - you find it under http://<server>:<port>/nwa
best Regards,
Marcel -
Having GP point to customer iViews and not "com.sap.pct" default iViews
We are tailoring the SAP-delivered ESS Life and Work Events Guided procedures, and have now successfully built a couple of them. However, when we execute these procedures, they point to the SAP-delivered ESS iViews, and not to the copies we have made
e.g. pcd:portal_content/com.sap.pct/every_user/.............../com.sap.pct.erp.ess.employmentverif INSTEAD OF
pcd:portal_content/com.COMPANYNAME//com.sap.pct.erp.ess.employmentverif
I have searched high and low throughout the available documentation, and have not seen how I can point to our customied iViews.
Any insight will be gratefully acknowledged.
Sincerely
RobProblem solved.
I was defining the actual webdynpro as the callable object. What I should have done was invoke a Portal Iview, NOT the dynpro. In doing that, I brought up the personalized iview, and everything worked like a charm. -
EP6: com.sap.pct.crm.generics.ValueHelp not found
Hi at all,
We are tring to setup crm default scenario in EP6.
To do this we have imported the relative business package from iviewstudio.com (Business Package for SAP CRM 4.0 50.2)
The Bsp part of the application seems to work fine but we get an error following the link that should open a pop-up to help the user selecting values
The error is described here:
<i>Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: /global/services/service-iviews/local/com.sap.pct.crm.generics.ValueHelp.</i>
This Iview was imported correctly from the business package (I've checke the import logs).
I've looked on the server and I've found the related classes/jar (generics.jar).
I've looked also log (using the logviewer application) files but there nothing releted to this.
Does anyone have an idea to solve the problem? or something else to check?
Thanks in advance,
Bye
FabioHi Giovanni,
It looks like a permissions issue, you might want to refer to the permissions of
1. The role that you are creating, see to it that you have everyone group assigned to it and enduser checked.
2. As you are connecting to CRM system, you might be have created a system using which you are accessing the CRM system, check for the permissions of that as well.
Hope this helps.
Cheers,
Sandeep Tudumu -
Hi,
I have upgraded my EP from EP 6.0 SP 9.0 to EP 6.0 SP 19.
I have undeployed the following first
com.sap.pct.mdm.appl.packages.mdm_550
com.sap.pct.mdm.tech.packages.mdm_550
com.sap.pct.mdm.tech.systems
com.sap.pct.mdm.tech.wizards
com.sap.pct.mdm.appl.masteriviews
com.sap.mdm.tech.connector
com.sap.mdm.tech.mdm4j
com.sap.mdm.uwl
com.sap.mdm.uwl.config
When trying to deploy BPMDMTECHN06_0.sca, I am getting the error. Can any one tell me the reason.
Starting Deployment of com.sap.pct.mdm.appl.packages.mdm_550
Aborted: development component 'com.sap.pct.mdm.appl.packages.mdm_550'/'sap.com'/'SAP AG'/'5.50.20071025121041.0000'/'0', grouped by software component 'BP_MDM_APPLICATION'/'sap.com'/'SAP AG'/'1000.5.50.6.0.20071025122621''/'0':
Caught exception during module deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.pct.mdm.appl.packages.mdm_550.. Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive .\temp\deploy\work\deploying\com.sap.pct.mdm.appl.packages.mdm_550.epa: The following objects could not be locked: [pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm.appl.mdm_550/com.sap.pct.mdm.appl.iviews/com.sap.pct.mdm.appl.bupa/com.sap.pct.mdm.appl.bupa.result_set|Administrator]
com.sap.portal.prt.sapj2ee.deployment.PortalDeploymentException: Failed to deploy archive .\temp\deploy\work\deploying\com.sap.pct.mdm.appl.packages.mdm_550.epa: The following objects could not be locked: [pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm.appl.mdm_550/com.sap.pct.mdm.appl.iviews/com.sap.pct.mdm.appl.bupa/com.sap.pct.mdm.appl.bupa.result_set|Administrator]
at com.sap.portal.transport.deploy.PackageDeployServiceImpl.deployArchive(PackageDeployServiceImpl.java:215)
at com.sap.portal.transport.deploy.PackageDeployServiceImpl.deployArchives(PackageDeployServiceImpl.java:363)
at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.deploy(PortalRuntimeContainer.java:163)
', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception during deploy: Failed to deploy archive .\temp\deploy\work\deploying\com.sap.pct.mdm.appl.packages.mdm_550.epaIt seems like few objects are still locked. I faced this problem once.
Please restart the WEBAS and then proceed again. Restart will release all held locks on the objects.
Please award points if helpful
Regards
Saurabh -
Disabled standard role com.sap.pct.pdk.JavaDeveloper
Hi - I've logged an OSS but if anyone can help me quicker it ould be most appreciated;
the role com.sap.pct.pdk.JavaDeveloper can be found in the portal
content location
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Roles/com.sap.pct.pdk.JavaDeveloper
when i double click on that role it shows only one Workset called
Examples and within it a workset called OBN Examples
I searched the SDN and found this post:
/community [original link is broken]
forumID=53&threadID=19464&messageID=162992
which sounded exactly right. sure enough the role was assigned to the
administrator.once i removed it, the role is now not working for any of
my logons - test users or Administrator.
in addition we do not have the object com.sap.pdk.JavaDeveloper in our
system.
help
andysorry, probably haven't explained it well enough.
it used to have lots of entry points, yes. but none of them were visible in the portal catalogue, except one "Examples"
the linked post describes exactly the same problems. when i followed the recommended steps "remove the role from the Administrator account" in that post, the role stopped working, apart from the "Examples" workset. Apparently we are not using NWDI and apparently this has some relevance, in that we can't create the system alias for the webDynpro as the post also recommends.
to recap - the standard role, since unassigning it from the administrator account, now does not function for any user. only the workset "Examples" is visible in the role. this was the case before. trying to view the other objects in the role is the reason I was working on it., since we have a requirement to add the Portal Logviewer in to the content developer role, without giving them the whole of the PDK/PRT maintenance applications. it now transpires that they were not displaying and were hidden becasue they are not Iviews, but are components accessed directly.
Does it need to be rebuilt? if so , how?
thanks ,
andy -
hi
Friends
in sap portal>portal content->content admin>end user content->employee self service--->line_manager
under iview--->com.sap.pct.erp.mss.requisitionrequest_statusoverview WHENEVER I AM CLICK INTO THAT IVIEW
SHOWING ERROR
Target URL of Broken Delta Link: pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.common.bp_folder/com.sap.pct.erp.common.iviews/com.sap.pct.erp.common.isrstatusoverview
please help me
rafi shaikHi,
I know this is an old thread but I could'nt find this subject into any other thread and I got the same problem recently.
When you are performing the export, choose '*' as filter.
Then, you should be able to get this temporary object into an .epa
Import it in your target system, it should work fine.
Best regards,
VijayKalluri -
Location of com.sap.portal.dsm.par in SP23 of NW2004
Hi all,
For an issue discovered in SP22(SAP Note 1235253), SAP has provided a work around. Thats to take a file com.sap.portal.dsm.par from SP23 and deploy using SDM.
But i am not sure in which SDA/SCA this particular file is present.
Please let me know the SDA/SCA file where i can find com.sap.portal.dsm.par.
Regards
VenkateshHello,
What I want to do is to put the logon page in the light framework page so that the users can login from the anonymous portal. After I customize the logon page I want to create aniview in the detailed navigation.
If you want to see the jsp files that the com.sap.portal.runtime.logon.par file you have to go to the file system and copy the .par.bak file , rename it to .zip and all the files are there.
But my question is if this is a par file that is deployed in the portal , why I cant create an iview from this par file? From other forums I have read they say that creating an iview from this par file it will put the logon page where you want. But when I try to create an iview from PAR File the com.sap.portal.runtime.logon doesn't appear in the list of available par files.
Please help me on this and will give rewarding points.
Thanks
Luis -
Hi!
I am facing with either authorization or some other problem within interaction between BEx Analyzer and Portal.
When try to check the functionality of the object
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexanalyzer
via "Preview"
I get the following error:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template
Can some one help me to solve my problem?
What are the steps to integrate BEX Integration into SAP EP?
I am on SAP EP 7.0 SPS 17.
Thank you very much!
regardsHi Holger,
As you aptly said its the authorization problem. The role which we are assigning to the user must have permissions set. Please make 'Everyone' user with end user permissions and for the everyone group also. After this restart your server. Also pls chk for the full Domain name URL thru which we are accessiong portal
Please check SAP Note 890314 .
This will surely help you.
hope this was useful.
Regards
Shaila -
Package com.businessobjects.samples does not exist
<p>I am trying to run a jsp with parameters passed to a rpt file but Iam getting an error: package com.businessobjects.samples does not exist, import com.businessobjects.samples.*; //[ /Sample Reports/E2ECompliance-SelectionPage-viewer.jsp; Line: 6]<br /></p><p>Does anybody know where this package is and why eclipse or the jsp is not finding it. I can run other jsp examples fine.</p><p>Thx</p><p>Vibhi</p>
U will find them in pojosamples.jar.
If you have any doubts regarding usage of pojo, contact me at [email protected] -
Com.sapportals.pct import issue
hi,
One of my programs uses the flollowing libraries.
import com.sapportals.pct.util.pdv.IDataViewer;
import com.sapportals.pct.util.pdv.PDVDynPage;
import com.sapportals.pct.util.pdv.source.ISource;
but it complaints that it cannot find com.sapportals.pct
can anybody direct me where I can import this from.
thanks a lot.Hi,
For future reference use this very helpful tool called class locator.
Once configured, it will automatically locate the jar you need for you.
You can download it from <a href="http://sourceforge.net/project/showfiles.php?group_id=69863">here</a>
Hope it helps,
Roy -
Hello,
I am trying to export / package Design Studio SDK, i am able to test / run it successfilly in eclipse but, getting error "Unable to find: Installable Unit [ id=com.businessobjects.mds.olap.protocol.ess_japi version=14.0.0.201504131108 ]" while packaging design studio SDK. when i am exporting the project it is failing at 78% and getting the above error. PFA screen shoot for the same.
Detailed Error:
C:\Users\Saurav\workspace\SDK_Packaging\package.SDK_Packaging.group.group.group.xml:88: The following error occurred while executing this line:
C:\Users\Saurav\workspace\SDK_Packaging\package.SDK_Packaging.group.group.group.xml:2369: Unable to find: Installable Unit [ id=com.businessobjects.mds.olap.protocol.ess_japi version=14.0.0.201504131108 ]
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:551)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:444)
at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:105)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.GeneratedMethodAccessor200.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:392)
at org.apache.tools.ant.Target.performTasks(Target.java:413)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.eclipse.ant.internal.core.ant.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.eclipse.ant.internal.core.ant.InternalAntRunner.run(InternalAntRunner.java:672)
at org.eclipse.ant.internal.core.ant.InternalAntRunner.run(InternalAntRunner.java:498)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.ant.core.AntRunner.run(AntRunner.java:378)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.runScript(FeatureExportOperation.java:422)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.doExport(FeatureExportOperation.java:285)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.doExport(FeatureExportOperation.java:223)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.run(FeatureExportOperation.java:107)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:53)
Caused by: C:\Users\Saurav\workspace\SDK_Packaging\package.SDK_Packaging.group.group.group.xml:2369: Unable to find: Installable Unit [ id=com.businessobjects.mds.olap.protocol.ess_japi version=14.0.0.201504131108 ]
at org.eclipse.equinox.p2.internal.repository.tools.tasks.AbstractRepositoryTask.prepareIUs(AbstractRepositoryTask.java:186)
at org.eclipse.equinox.p2.internal.repository.tools.tasks.MirrorTask.execute(MirrorTask.java:60)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.GeneratedMethodAccessor200.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:392)
at org.apache.tools.ant.Target.performTasks(Target.java:413)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
at org.eclipse.ant.internal.core.ant.EclipseSingleCheckExecutor.executeTargets(EclipseSingleCheckExecutor.java:30)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:442)
... 26 more
ThanksHello All,
Thanks for giving time for this thread. I have solved this issue. Actually when we create Feature Project by default all Pugins and Fregemets will be added to featured project(i guess in some eclipse version since SAP has not mentained any Note for this), we need to delete unnecessary plugins from the featured project. Just select all and right click and delete. Then again add SAP Sample SDK.
Even thought it will packaged properly and will create zip file and you will be able import it to the Design Studio but you cann't select and install it to the Plateform from Design Studio, make sure for this you have Unchecked Ckeckbox: Unpack the plug-in archive after the installation.
I think this will help.
Thanks
Maybe you are looking for
-
How do I remove the grid map over an object when working in 3D?
I am working through Adobe's Photoshop CS6 Classroom in a Book, Section 12 - Working with 3D Images. So far I have found it all fairly straight forward and very useful. I am at a point where I am applying textures and materials to my objects, however
-
hi all. please i need to read data seperated by coma from a text file and insert it in oracle database. how can i do this thanx
-
Hi, please help me after I updated my c7 software to symbian anna my front camera is not working, I am getting error "unknown error occurred, please restart the camera, if problem persist then restart the phone" and after restarting still I am gettin
-
When I right click on one repository, there is nothing dispalyed. It means that I can not use Login function in which I can do some configuration. Could anyone tell me why it is happened. My MDM Edition is MDM 5.5 SP04.
-
Is the iPhone 5 Unlocked Overseas?
Hello there, does anyone know if my iPhone 5 is locked or unlocked? I'm in a different country (Venezuela), and I'm looking to purchase a new SIM card. However, before doing so I would like to know if this will work. Thank you!!!ark Mark