Depreciation Document and its number range
Hi
Currently we are in process of migrating system from ECC 5.0 to Ecc6.0.
ECC 5.0 for depreciation document number range was external. So when we copied the existing system to upgrade, system number ranges were copied as external for Ecc6.0
When we are trying to run AFAB (Depreciation Run), it is giving error like number range should be internal. So i have to change that.
When i go to FBN1 and trying to remove flag for external, it is not allowing. It is display status for that column. I have authorisation to change FBN1.
Can any one guide me to how to remove that flag.
Thanks and Regards
Ramarao.p
When you have a authorization problem you have first to solve that, it is possible the remove it (it is then removed for all the years for that number range, not only the last year!!)
The steps are:
FBN1 Change intervals, remove the flag Ext
SE16 Table TABA. Select the current fiscal year and you will see the last used document (when you want to do depreciation for old fiscal years you have to fill in the number ranges to)
FBN1 Change status, fill in the last used number.
Similar Messages
-
I'm now using a javabean in my jsp page to parse xml;when my xml file's size is
about 10k,it just work fine;when my xml file's size became 50k,it throws the followng
Exception:
Failed to open xml document,Failed to retrieve Public id or system id from the
document. Decrease the number of char between the beginning of the document and
its root element. But when I run this javabean in JBuild ,it works fine no matter
how big the xml file becomes;
Why? the error message is in the attachment.The prologue must be included at the top of the document, followed by the root
element.
joden2000 wrote:
> what does this exception mean:decrease the number of char between the beginning
> of the document and its root element? When my xml file is about 10k,it works
> just fine,when it becomes 50k ,the exception show.How can I deal with this?
-
New Document Types and new Number Ranges
Hi,
Plz tell me How to configure New Document Types and new Number Ranges for Services and Asset Purchases.
How can i maintain Services with or without Master data.
Plz tell how much services are there and how to configure step by stepHi
New document type can be configured in SPRO - SAP IMG- Material management - Purchasing - Purchase order - Define number rabges / define document types.
With out service master straightaway you can create the Service PO with account assigment.
AC03 - Create service master record.
ML10 - Model service specifications
Then Service conditions ML33 or ML39 or ML45
Create the PO and then do the service entry in ML81N
Regards,
Raman -
Generation of Billing Document with odd number range.
Hello SAP folks,
There is specific issue related to billing document which are generated on Production server. There are billing document which are created on a date lets say 06.01.2009 and number ranges are assigned to it. But when another Billing doc is created on some later date, then how come the number of that billing document be less number range produced on 06.01.2009.
Billing doc -- > 95906218 dated 06.01.2009
Billing doc -- > 95906249 dated 13.01.2009
Billing doc -- > 95906264 dated 06.01.2009
Could anyone throw any light on the reason for this topic ???
Regards,
Sarthakhow come the number of that billing document be less
One possible reason could be the user would have executed via VF04 and selected for collective billing. Based on ascending order of delivery documents, invoice would also have been generated. This means, you have to check the corresponding delivery for the following:-
95906249 dated 13.01.2009 and
95906264 dated 06.01.2009
If my assumption is correct, the date what you had indicated is nothing but "Actual GI Date" from delivery. Having said this and also as stated above, delivery would have been created first for the billing document dated 6th and followed by the other delivery on 13th.
thanks
G. Lakshmipathi -
Hi,
How can in the system FI and SD number range for billing documents be made same.
thanks
RekhaHi,
FI and SD number ranges can be made same for billing documents. SD number range should be made internal and FI number range should be made external.
Thanks
G.Bharathi -
Hi,
How can in the system FI and SD number range for billing documents be made same.
thanks
SekharHi,
FI and SD number ranges can be made same for billing documents. SD number range should be made internal and FI number range should be made external.
Thanks
G.Bharathi -
Erase a document and its show a message asking for a password
I try erase a document and its show a message asking for a password of the administrator, and them the document don't go to the trash. How can I solver this?
I alredy try change the definitions and preferences of the finder and don't solve the problem.Choose your Home folder "Get Info" (command-i) and be sure you have "read & write" in the Sharing & Permissions section. Check under "General" section to be sure it isn't locked. If that is correct, launch Applications/Utilities/Terminal and at the prompt copy & paste this command…
mkdir ~/.Trash
Press return.
If you get a message that the folder already exists, copy & paste these commands...
sudo chown $UID ~/ .Trash
Press return.
Enter your admin password (it will be invisible)
Press return.Then enter
chmod u+rwx ~/.Trash
Press return. Log out and back in, or restart. -
Internal and external number range for a deivce
Hi Experts..
We have a client requirement where in we need to have both external and internal number ranges defined for the device.
But while creating a device it always takes external number range and never takes internal number range.
What is the possible reason for it and how can i rectify it.Hi Arvind
do u mean even when an externam name is provided in the device creation and still the screen does not accept it?
let me know
kr
raj -
Define groupings and assign number ranges
Hi,
I want to ask about customizing
In Recacust --> business partner --> Relevant setting for BP in RE context --> number range --> Define groupings and assign number ranges
There are Internal Standard Grouping column and External Standard Grouping column.
What is that for ? if i set both of them to active, what's the effect ?
Thank youHi,
If I tick the "ext.std grping" in one of BP grouping (for example in grouping 0002). Grouping 0002 will be used as standard grouping. The BDT selects this standard grouping if a business partner number was assigned to a business partner when the latter was created, but not a grouping.
Then,,, when i try to delete external grouping that used as the standard grouping, there was a message "External standard grouping 0002 must not be deleted"
How to un-tick this "ext.std grping" ?
I think this affected the BP creation. Now, I can't create BP, there always an error message "GET_BUSINESS_SYSTEM_ERRORAn error occurred when determining the business system"
Thank You -
Im trying to save my cv as a word document and its not giving me the option to do when i save as
im trying to save my cv as a word document and its not giving me the option to do when i save as
Nathan,
You don't say what version of Pages you are using or what version of the OS you are using. In general though, you can Export to Word format either from the File menu or the Share menu, and under some circumstances, when you Save, you can check a box to Save a Copy as: Word. Export is the best option from the point of view of being reliably available in either File or Share menus.
Jerry -
Invoice and Accounting Number ranges
Hi,
I have a requirement where the invoice number and the accounting document number should be same. Ie: If I generate an invoice with number 101. The same number should be populated for the accounting document as well.
Regards,
SamHi Sam,
Yes. The path is SPRO -> Sales & Dist -> Billing -> Billing Documents -> Define number ranges for billing documents.
I dont think you can have an external number range for a billing document. Infact the provision is not available in the billing document type config screen.
Regards
Nadarajah Pratheb -
Same Document type, Different number ranges
All SAP Gurus,
I want to assign Different number based on movement types, but the problem is that both the number ranges (101 for purchase order and 122 return delivery to vendor) are having the same document type (WE).
Is it possible to assign different number ranges to them?
Please give ur valuable suggestions.
RegardsIn Std SAP , It is Not Possible..
-
To create document type related number range
Dear Experts,
I want to maintain number range document typewise say ABC, XYZ, LMN.
For these document type i want to maintain internal numcer range.
Please suggest.
ThanksDear all,
Go to SAP customizing implementation guide--> cross application component-> Document management--> control data--
.> Define ducument type.
Select document type for which internal number range has to be assigned and click on Details
nuber range assignment should be '1'
Then select the Internal number range for which your are going to assign say 04/05/06/08 etc
Then come back
Go to SAP customizing implementation guide--> cross application component-> Document management--> control data--> Define number range for document number
here for assinged number maintain required number range.
Thanks -
Internal and External number ranges
Hi,
If we have already created an internal number range and posted few SA documents. Then can we change the internal number range to external number range or vice versa(i.e external to internal number range)
Regards
AdnanHi Kalyan,
Thanks for the information. but just now i have tried changing the external number range to internal number range. It was successful. But i was not able to change internal number range to external number range
However, when i changed the number range from external to internal i had to also change the current number (so that the document numbers already posted should not conflict)
Regards
Rogers -
MIRO and MIGO number range for new financial year
All SAP Gurus,
We want same number range to be continued for MIGO and MIRO documents.
Is it needed to create the number range for MIGO and MIRO for new financial year or same number range will be continued automatiaclly?
Regards,hi,
The number range to be applied for the MIGO And MIRO documents depends on the YEAR which you have feed while maintaining the number range...If you want a new number range for next year, then you can maintain it from above transactions...Or if you wanna continue wid the same then can use the same number range as well...
As suggested maintain the number range get it applied, but remember if you maintain the number range as 2010 then that number range will be valid for the given year only...but if you give the number range 9999 then it will be valid upto 9999 year...
Hope it helps..
Regards
Priyanka.P
Maybe you are looking for
-
How to rename with inverse rating in the filename?
This is a question about sorting and renaming. I have a bunch of sports images in Lightroom that are all tagged with an appropriate rating or 1-5 stars. Because they are sports images, some are sequences of images taken at 8fps. I want the images to
-
I have a Mac Pro Mid 2010 and 2012 both running OS 10.8.5. Both using ATI Radeon HD 5770 1052 MB vid cards. Using the standard Display that came with the Macs, everytime I'm working in Ilustrator CS5 or 6, the Document I am working on gets transparen
-
Firewire Drive to Thunderbolt via Apple adapter speed issues.
Hi, My old MBP recently died (plastic at the back started to melt) while doing lots of editing so have bought a new MBP Retina display. As it only has USB3 and Thunderbolt ports, I purchased the apple Firewire 800 to Thunderbolt adpater to connect th
-
Determine Business partner number based on the user id
Hi all, Is there a way to determine the BP number of an employee based on the user id. The employee is created as a BP with role Employee in the system. I'm checking USR02 and BUT000.. But i find no link between them. Thank you, Preethi
-
Hi! How can I show a HTML-Page in Internet Explorer by clicking a Menu Item or a button? Thx!