Depreciation in group currency shows huge differences with local currency

hi,
i am posting depreciation for SG01(Singapore CC).System posts 100 SGD local currency and 20000 MYR in Group currency. I maintain currecncy rates and I checked the rates are correct.Inspite of maintaining the rates correctly.sap posting 20000k as group currency.
Sap should post 100 SGD and 300 Group currency.why system is posting the group currency as 20000.whether any config i am missing or anything i have to maintain.
Any help is greatly appreciated.
Thks
cra

Check translation ratios between SGD and MYR in TCURF table

Similar Messages

Is there a matrix showing the difference with features of agent vs. agentless in SCOM 2012?

Is there a matrix showing the difference with features of agent vs. agentless in SCOM 2012?

Agent monitoring requires an agent installation on the target machine
Agentless monitoring
An agentless-managed computer is a Windows-based computer that is discovered by using the Operations console. You assign an management server or agent-managed computer to provide remote (proxy) agent functionality for the computers.
Agentless-managed computers are managed as if there is an agent installed on them. Not all management packs work in agentless mode.
Agentless versus Agent-based server monitoring
http://thwack.solarwinds.com/community/solarwinds-community/geek-speak_tht/blog/2013/02/11/agentless-versus-agent-based-server-monitoring
Roger

FCTR calculations not showing in Group currency after SPRUNConversion

Hi,
We are working on legal consolidation. We are following a two step process, in the first step the LC is getting converted into Reporting Curencies and the FCTR differences are being calculated and stored in defined FCTR accounts through script logic.
In the second step we are converting the Reporting currencies into a Group Currency using SPRUNconversion. After this step all the RC's are getting into GC except the FCTR accounts. We have checked the properties of these accounts (Ratetype etc) and they are all properly set. The values of FCTR in reporting currencies are also getting deleted. Any help on why this is happening.
Thanks,
Prasanth.

Hi Abhinav,
Its not mandatory to follow a two step process, we are doing so because of clients requirement.
Usually the standard currencies you want to use for reporting are marked as 'R'. To use a Group currency define a group in your currency dimension and mark that currency_type as 'G' and give it a currency (usually one of the reporting currencies).
You can then run SPRUNConversion with the third parameter (currency) blank and run it once again with the Groups name that you defined as GC. This will show your LC values in reporting currencies and Group currencies.
Thanks,
Prasanth.

Can we writeoff/any other solution for difference amount in group currency?

Hi All,
One of the G/L account are getting difference between Local Currency (Co. Code Currency - CAD) and Group Currency (USD) as follows. Our Client wants to clear this amount in Group Currency (USD). Can any one help me out on this?
Problem description: at month end of february 2008 the Cumulative balance needs to be zero (blank) and it is zero in the local currency (CAD)
whereas it is showing an odd amount of USD 528 for the same, which we want to get rid of somehow, to make it show as blank. in USD also for the month end february 2008.
Hence please suggest any method to write off that balance/ reverse / any other alternative. so that both in USD and CAD it would be blank for month end february 2008
To view: FS10N with currency USD and with currency CAD

Hi Prasad,
In Logistics Invoice Verification, when you enter an invoice in foreign
currency, the system automatically translates the foreign currency
amounts to local currency. The system calculates the exchange rate using
the following rule:
1.If the buyer entered a fixed exchange rate in the purchase order, the
system uses this rate to translate the amounts to local currency.
2.If an exchange rate was entered in Invoice Verification, the system
uses this rate to translate the amounts to local currency.
3.If an exchange rate was entered neither in the purchase order nor in
Invoice Verification, the system uses the exchange rate pre-defined in
Customizing for Financial Accounting valid for the posting date.
Exchange Rate Differences
If a purchase order is entered in foreign currency,the amounts are
translated from foreign currency into local currency at goods receipt.
If you enter the invoice for the purchase order in the foreign currency,
this can lead to currency translation differences between the goods
receipt and the invoice receipt.
How these differences are posted depends on how your system is
configured in Customizing for Invoice Verification
Exchange Rate Rounding Differences
When an invoice is posted in a foreign currency, the amounts are translated into local currency.Since the system rounds off the amounts in each posting line, this can lead to rounding differences due to the currency translation.
These differences are posted to an expense or income account.
Addition in transaction OB22 for the second local currency, it should be defined 'Translation taking transaction currency as a basis' is defined.
Pls. also refer to note:335608 Trnsln of 2nd and 3rd lcl crcy fm 1st lcl/trns crcy.
I hope the above information helps you out......
Best Regards,
Gladys Xing

Currency translation differences with an effect on earnings

Product Version: SAP R/3 46.C
Componente: EC-CS-CSF-E Currency Translation
In currency translation program of ECCS (tx CX40) the prior year portion of translation differences that affects earnings is posted in current period in the earnings retain item (ER) which according to SAP documentation "Currency translation differences with subsequent consolidations" is correct, however when we run the currency translation on subsequents periods this amount is posted again generating a multiplying of differences on each period.
In accordance with section u201CBu201D of SAP note 553586, the carryforward item (retain earnings) was assigned to translation key 5, to avoid multiplications of this difference in every execution of currency translation for current period. This correction was applied successfully, however the problem is now generated when we run the currency translation in every subsequent period.
SAP notes 582815 and 553586 was applied succesfully.
We also verified SAP note 1045402 changing the translation key 5 to 1, for balance carryforward item (retained earnings) this avoids the difference effect on subsequents periods, but generates a translation differential effect undesired on this item, since this is a historical item that not must be altered by currency translation.
Additionally we read SAP note 509509 and we think that this issue corresponds whit symptom 2 of that note.
Step by Step:
Transaction: CX40
Setting of Translation SET in translation method:
1.- MARS-GAP-Monetary:
1.1.- Items of balance sheet
1.2.- Translation Key 1
1.3.- Item for differences: income statement item with an effect on earnings
2.- MARS-GAP-NonMonetary
2.1.- Items of balance sheet
2.2.- Translation Key 6
2.3.- Item for differences: income statement item with an effect on earnings
3.-MARS-MOR-Monetary
3.1.- Items of P&L
3.2.- Translation Key 5
3.3.- Item for differences: income statement item without an effect on earnings
4.-MARS-MOR-NonMonetary
4.1.- Items of P&L
4.2.- Translation Key 6
4.3.- Item for differences: income statement item without an effect on earnings
5.- MARS-HIST
5.1.- Items of balance sheet
5.2.- Translation Key 6
5.3.- Item for differences: Balance sheet item without an effect on earnings
6.- ANI-BS-FX
6.1.- Items of differences SET MARS-HIST and Carryforward Item for special items in transaction CXD3, the same item for the balance carryforward (retained earnings)
6.2.- Translation Key 5
6.3.- Item for differences: Balance sheet item without an effect on earnings (the same item for the SET MARS-HIST)
7.- ANI-BS
7.1.- The special balance sheet item in Transaction CXD3
7.2.- Translation Key 5
7.3.- Item for differences, the same item
8.- ANI-IS
8.1.- The special income statement item in Transaction CXD3
8.2.- Translation Key 5
8.3.- Item for differences, The same item
Note:
1 .- According to the point A of the note 553586 was included the FS Item 484051011(difference item for SET MARS-HIST) in the conversion SET ANI-BS-FX
2 .- According to Section B of the note 553586 was included the account for carried forward 481000001 the special accounts set up in the transaction CXD3 in the conversion SET ANI-BS-FX
3 .- According to Section C of note 553586 are included special accounts set up in the transaction CXD3 390000 and 251200, in the conversion SET ANI-IS and ANI-BS respectively.
When run the currency translation in the new year 1-2011, the prior year portion of translation differences that affects earnings is posted in current period a credit to earnings retain and debit to account difference in SET for this account. This amount is same on special balance sheet item 251200, in tx CXD3, also found on the statistical FS item.
Then in subsequent periods, 2 - 2011 it posting another credit to earnings retain and debit to account difference in SET for this account, generating a multiplying of differences on each period, even though the difference for this account (ER) in the log of the translation currency is equal to the difference posted to the previous period, show this in transaction CX34 for items of translation (1) for this account until 1-2011.
Edited by: Ana Brito on Jul 25, 2010 8:10 PM

Hi,
just a information how I did a workaround about this:
The opening (movement type 100) of the balance sheet item "differences of currency translation" is customized with "don't change...".
Every increase to "differences of currency translation" works with e.g. movement type 120 and will be carried forward to 100.
Maybe this is a scenario you can use...
BR

Realized exchange rate difference in local and group currency

Hi Friends,
For a company code with local currency as Euro and group currency as USD, the setting in TR code OB22 for group currency is: Translation taking first local currency as a basis. When the open items are cleared, SAP posts difference in local currency and group currency. Sometimes, document currency is also group currency i.e. USD. The realized exchange difference is posted in Euro but it is not converted from Euro to group currency. Instead, system just calculates difference in group currency by comparing the value in group currency at the time of original transaction and when the transaction is cleared. Does anyone have dealt with such requirement and is there a way to be able to translate realized exchange differences from local to group currency?
Thanks and regards,
Pinky

>Sometimes, document currency is also group currency i.e. USD.
Can you explain, it's because of your settings or because of SAP?

Difference in Local currency and Group currency Balance

Hi,
I have a query where ...
Company code has 2 currencies ;Group currency is USD and Document Currency is GBP
This GL account is zero balance account . It has alredy set up in Document spitting customization setting
Through FB03 normal view we can see the zero balance but while displaying the document general ledger view with option of group currency ; it is showing zero balance for the local currency and balance amount for group currency USDu2026
Can I get any suggesion where should I need to check for this?
Thanks in Advance

Hiten,
We are on ECC6.0. For us the problem is ongoing production orders.
Based on SAP notes about excluding zero balance orders from settlement process, I tried to close such orders but system does not allow it as it sees the parallel currecy balance.
Thanks,
Sanjay Wagh

Unable to clear GL due to Val difference between Local and group currency.

hi,
We have an open item managed Revaluation G/L account in our company code which has a local currency USD.There are some documents posted to this account in both USD and CAD. But when we analyze the docs posted in CAD we found a valuation difference in the local currency(USD) and the Group currency(again USD). I am not sure of the reason for this. But due to this difference we are unable to clear this account. Please let me know if anyone can think of how to clear this particular GL account.
Rgds,
Raj/
Edited by: raj3875 on Oct 8, 2009 11:37 PM

We have an issue even with document currency in USD. there is a valuation difference between Local currency (USD) and Group currency (USD).
For example:
Doc currency = 0 USD
Local Currrency = 171,000 USD
Group currency = 0 USD
Because of this I am not able to clear the account. Not sure why there is a difference inspite of the same currency. I try to clear it in F-04 but I get the below error:
Posting is only possible with a zero balance; correct document
Message no. F5060
Regards,
Raj

Problem with depreciation area (Incorrect currency exchange rate is used)

Good day to all SDN forumers!
I'm having a problem with one depreciation area that we set up. The reason why we configured this depreciation area is for us to enable to monitor all asset postings in another (group) currency aside from the local currency. We set it up in such a way that the depreciation would not post and would thus only "convert" the asset postings to group currency using the table rates in table TCURR (via OB08).
The problem is despite having defined an exchange rate for the current period, the system still picks up the exchange rate for 01/01/2001 which is incorrect. This affected all reports which displays incorrect values whenever I view the postings using the 2nd depreciation area we set up. Is there a way we can correct this?
I'd really appreciate your comments and suggestions guys. Thanks a lot and more power!

Update:
I created a new depreciation area by copying an existing area and updated some of the configuration. The problem is still there though, since the depreciation area still reflects the <b>incorrect</b> rate (similar to that of the previous depreciation area) whenever I access it using Asset Explorer. What's surprising is that even though I've already set the exchange rate (e.g. USD to EUR) to match that of the asset's capitalization / acquisition date, the posted values still do not reflect what I defined in table TCURR. Instead, it reflects the exchange rate used by the old depreciation area. Help anyone? We are already in a production client and transfer/retirement of all the assets is not an option the client would like to undertake.
Edited by: Patrick on Nov 6, 2008 4:45 AM

Group Currency - adding with local 2nd currency

Dear All,
If I can select 30 as Group Currency system automatically picks as "EUR" as a Group Company is Europe. The first Local Currency is INR. I want to bring the USD as the 2nd local currency.
USD added the Country Code settings in IN and it shows as Hard Currency while I am trying to bring the 2nd local currency.
I need to add USD as 2nd local currency to Indian Company with the description of Group Currency.
Need valuable help and guidlines from the experts.
Thanks in advane.
Regards,
SS

Hi,
Click on pencil Icon in Application menu, if you couldn't find then you are not authorized to change.
This change will be at client level and it is cross client change.
Regards,
Raj

GL Balance not showing in F.01,,when choose group currency 30

Hi gurus,
When we run the report : F.01 (Balance Sheet / P&L Statement) with Currency type: 10 (Company Code Currency - INR) report is showing all GL balances.
But if we run the same report: selecting Currency Type 30 (Group Currency-USD) no GL Account balance is not updating in the report F.01.
Can you please let me know what will be the problem ?
Thanks,
Samar

Hi ,
It is not related to foreign currency gain/loss a/c.My users when he runs Trial Bal through F.01,he use "Currency type 30 and found no GL balance is coming.But when he uses Currency type 10 then all balances are coming.
Kindly advise.
Regards,
Samar

Problem with Group Currency

I looking for help!!
We do a initial loading of financial postings with LSMW. We had a big problem!!
The postings were made without the amount at the group currency.
Now we show it at the reports of Controlling, too late for change the postings.
We need a solution for change this without do a new posting. Someone can help us?
The values at the local currency ARS are correct, we have just the problem with the group currency EUR.

IF the posting were made with out group currency, There is no way you will get the group currency. What you need to do is just load the balances in group currency using the tcode FBB1 and leave document and local currency fields zero.
Assign points if helpful

Clearing F-03 is not happening due to difference in Group Currency

I am doing a mannual clearing f-03 for cenvat clearing account. All SPRO settings including OB09 are maintained and working fine; but when I try to post the doument it show that there is a small difference in Group Currecny figures. When I simulate the transaction in Group Currency figure, there is very very small difference against the Exchange Fluctu.Accounts figure.
System is not automatically calculating this Group Currency figures (foreign) correctly due to which difference get arise.
Even though in Local currency (INR) figures are matching I am not able to post the clearing document.
Is there any way out ? Whether any SAP Note I have to apply to resolve the issue. (Presently on ECC 6 EHP 3)
If require I can send the screen shot too.
Regards
Sandeep

If your OB09 settings are appropriate, the clearing difference in group currency should automatically go to the gain/loss account you have defined in OB09. Can you copy/paste the OB09 settings here? Do you have an account specified for the realized gain/loss in OB09 or just for unrealized gain/loss? That could be one reason.
Another thing that you may want to check is if the realized gain/loss account is created as a cost element. If yes, you need a cost object (cost center, most likely) for this realized gain/loss account (in OKB9).

Exchange rate difference posted to Group currency only during MIRO

Hi SAP Gurus,
We're activating parallel currency in ML and USD is the group currency. GR/IR clearing acct is managed in local currency only.
OB22
Crcy Type 30    Group currency                               Currency   USD
Valuation        Legal Valuation
ER Type    M     Standard translation at average rate
Srce curr. 1     Translation taking transaction currency as a basis
TrsDte typ 3     Translation date
Please find below scenario:
Co code currency: ZAR
PO: ZAR
Upon GR:
Posting date- 04/14/2009 exch. rate 1ZAR= 0.11099 USD
Entry: debit Expense - 4,078.19 ZAR/ 452.64 USD
          credit GR/IR acct -   4,078.19 ZAR/ 452.64 USD
Upon IR:
Posting date- 04/20/2009 exch. rate 1 ZAR= 0.11279 USD
Entry: debit GR/IR acct - 4,078.19 ZAR/ 452.64 USD
          credit Vendor acct - 4,078.19 ZAR/ 460.02 USD
automatic additional debit Expense - 0.00 ZAR/ 7.38 USD
Here are my questions:
1.) Where would I check the setting for the GL account used in the automatic line entry posted in group currency during IR? (3rd line item above)
2.) Can this be changed? Say instead of the original acct assignment, the management want to change it to FX gain/loss account
3.) How?
I have checked several notes (331910,etc) but I can't seem to find the answers to my questions.
Appreciate your help. Thanks!
Regards
Dru

Just an update to this issue- I just found out that the system is pointing to KBS when posting the
exchange rate difference in group currency upon IR, hence, PO account
assignment is adopted. I'd like to rephrase my question- is there any
way we can change SAP behaviour such that it will point to other
transaction key (e.g. KDG) other than KDM? Bottomline is we want it
charged to other GL account not the one in the PO.
Thanks so much for your assistance.
Regards,
Dru

Document is not showing up group currency in the GL line item display

Greetings,
Could you please advice me as to why document is not showing up the group currency in the line item disply, when all other document posted to that GL are showing it.
Your prompt reply will be appreciated.

Hi
select screen layout and copy gorup currency field.
Hope it will work
Regards
Murali

Depreciation in group currency shows huge differences with local currency

Similar Messages

Maybe you are looking for