Depreciation not displaying line items

hi all,
While running depreciation run in test mode no line items are displayed and no errors are there if we see error log what could be the reason plz. tell me and in if run in real mode the values are posted but books are not updated plz. help me

hi
please check whether you have run the correct period for the fiscal year.

Similar Messages

FS10N - Not displaying line items for Archiving document

Hi Experts,
When we are double clicking on the FS10N accont display balance report to get line item reprot, it is not displaying archived document data. We have also deleted secondary indexes for those archived document.
We are able to get same report while using FBL3N with Archive info structure loaded with data.
Please suggest how to do FS10N archive enabled?
Thanks,
SamirV.

Hi Samir,
You should look at the following SAP notes and implement the corrections:
792515
776164
and 831568 (if you use business areas)
Regards,
Eli

Displaying line items, although not activated in FS00

Hi everyone!
I've got a question about line items.
I had created a GL account, and in it's master record I didn't activated Display line item. But, when I call transaction for displaying GL account's line items (FAGLL03), I can see line items?
How is that possible?
I know that there are some special cases, for example expense accounts: for every expense account there is a cost element in CO, and no matter settings in FS00, for expense account there is always line item display. Similary, reconciliation accounts always have open items management, irrespective of settings in FS00.
But this is just regular account, with very few settings in master record: its balance sheet account, the account currency is local currency, sort key 001 and field status group G001. And that's all.
Can somebody explaine this?

Guys. In addition to above my problem. I was facing this problem due to some graphics issue on my laptop. I was not able to see most of the fields because of Graphics Driver installed on my laptop. ( Later on I got this solution. ).
This seems very unrealistic to hear but my experience is true.
I hope in future if some one will have this issue please check out driver compatibility specially Graphics. This problem may suppose to encounter with Dell.
Anyways Z layout also worked fine as suggested by Guest FICO.
Thank you all.
Regards,
Sharvari Joshi.

Not able to display line item 20 in contract

I could not able to display line item 20 in the contract document.
line item 10 and 30is there however there is no line item 30. What could be reason and how to enable the same.
MRS

It may also possible if user forgot to enter the line item 20 and jump to line item 30 after 10 as below.
Then system will show as like this

Display line items not possible!

Hello
I've a very strange situation on the productive system:
I have a company code that registers and display account line items, while the second cannot display them, even if I've configurated the same aspects in account fields for the two company codes. That means they have the same
- flag on display line items AND
- sort key 001 - POSTING DATE
why??
thanks a lot in advance,
Chiara

No, the answer was not that one, but thanks anyway.
Finally I found the answer in
Forum: Message MSITEM033 in New GL - Cannot Display GL Line Items
note OSS:
- 1323960 Incorrect entry '/' in SKB1-XLGCLR and BSEG-XLGCLR
- 1149500 Clearing open items by batch input selection
- 1437341 Note 1437341 - Correction of BSEG/Index tables after note 1323960
regards,
Chiara

How to display line items twice in a single page in sap script

HI,
I am working on check printing. I copied the standard driver program and form to Zprogram and ZForm. Which are RFFOUS_C(print program) and F110_PRENUM_CHECK(Form Name).
I want to display the line items twice in the same page and sub sequent pages.
Currently I am able to display line items only once.
Example:
PAGE1.
line item1
line item2
line item3
line item4
line item5
line item1
line item2
line item3
line item4
line item5
line items 1 to 5 which are in main window.
How to achive this problem.
Regards,
vinod

Hi
I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more.
Best regards
JD

S_ALR_87012165 not showing line items

hi
i am using the report vendor balances and line items with t-code S_ALR_87012165. it is not displaying the line items in production but the same is giving correct in development server.
I am looking for some settings by which i can see the favorable results.
Thanks

Hi,
In the report S_ALR_87012165 there is a output control field, which controls the display results.
In that haave you checked the Display line items.
Kindly revert back if you are facing some other issues.
thanks and regards
Praveen.J

Error display line items

Hi Gurus,
please help me on this error.. what to do?
No line item display possible for account 41000010 1000
Message no. F4430
Diagnosis
You have determined that displaying line items is not to be possible for G/L account 41000010 in company code 1000.
Procedure
It is presumably a clearing account (incoming check account, GR/IR clearing account) which has its own reports for analysis.

Hi,
Intally GOTO FS00 and tick the line item display and then GOTO SE38 and give program RFSEPA01 and execute .
then GIVE co code and GL account number
Documemt 1-999999999
hope this solve your problem
regards,
Santosh kumar

Display line items in Cells of a table- Smartform

Hello All,
Can any one help me achieving the below requirement.
I have a requirement of printing invoice with a smartform. I am displaying line items from a TABLE node by looping VBRP's internal table. There are 12 cells and the 5 th cell contains a number of Dicount rates.
I am displaying these discount rates from LOOP node by looping KONV's internal table within that CELL. The 7 th Cell has got 2 values which are required to be: one aligned to the TOP right corner of the cell and the other to the bottom right side of the cell.
Now the issue description is:
CELL-5: Contains unknown number of values for display within the cell to be positioned as MIDDLE justified for an item(POSNR) of the main item table.
CELL-7: Contains two fixed values :KWERT to be at Top right of the CELL-7and NETWR at the bottom right of CELL-7
I have managed to display the sub items in CELL-5 in the middle by giving values to SPACE BEFORE/SPACE AFTER sections of PARAGRAPH FORMAT in SMART STYLE.
Requirement: Irrespective of number of sub items in CELL-5 the 2 values in CELL- 7 to be aligned as one at the top right and the other to the bottom right cell flexibly . Same applies to other items(POSNR) of MAIN VBRP item table.
The ROWS of the MAIN Table to be flexible enough to shrink the space when then are less number of subitems in   CELL-5.
Values in Cell-7 should be adjusted according to contents in CELL-5.
Thanks in advance for your valuable suggestions.

Hi,
Do one thing while filling the 5th cell , count the number of values(counter) in it for each record and fill new internal table (Itab_cell7) as follws.
DATA : FLAG,
counter1 type n.
DO COUNTER TIMES.
counter1 = counter1 + 1.
CLEAR FLAG.
IF counter = 1.
    WA_CELL7-VALUE = KWERT.
    APPEND WA_CELL7 TO ITAB_CELL7.
    FLAG = 'X'.
ENDIF.
IF counter1 = (counter1 - 1).
    WA_CELL7-VALUE = KWERT.
    APPEND WA_CELL7 TO ITAB_CELL7.
    FLAG = 'X'.
EXIT.
ENDIF.
IF FLAG NE 'X'.
WA_CELL7-VALUE = ''.
APPEND WA_CELL7 TO ITAB_CELL7.
ENDIF.
ENDDO.
Adjust the code if need as per your data.
In cell 7 under loop node print ITAB_CELL7 values in a text. and prepare a paragragh for alingment.
if it does not work for send me the XML file for your smartform.
Regards,
Antim

FS10N GL Balances not showing line item details

Hi Expert,
i am unable to see the posted document in FS10N. i ve check the Button in FS00 Line Item display.. and save it.
again i did but FS10N display line item not showing .. see the error message below.
No items selected (see long text)
Message no. MSITEM033
Diagnosis
No line items meeting your selection criteria could be read. This could be for the following reasons:
1. No corresponding items have been posted.2. You are not authorized to display this data.3. The items have already been archived.4. Migration from classic General Ledger Accounting to new General Ledger Accounting: In migration phase 1, postings are only made to the account for the non-leading ledger

Big hello for you too my friend My 2 babies are taking all my attention! I am missing my old times here!
See, you have to understand when you have posted your GL account in 2013 you had only balance information stored. It means you have no data stored in table BSIS. When you activated Line item display this issue stands.
You won´t create entries in BSIS if you check that flag. Thus you only will have items from now on.
Have a test. Post new entries and check. they will appear.
Check also
LINEITEMS MISSING IN FBL3N AND FS10N
Best Regards!

Problem in display line items in FS10N

Hi all,
I have checked ,check box in G/L account "Line items display " in FS00 in current period ( 4 / 2014 )after that line items get displayed in FS10N for this period .
There is problem in displaying line items for same G/L account with previous all periods such as 3/2014,2/2014,1/2014.
I have tried report "RFSEPA01" it works fine if we enter document number for selection with other parameters ,but it gives error if we run report with just Company code and G/L account .
Please provide any other way to get item details for previous periods or is there any update on report "RFSEPA01".
Please let me know why this issue occurred, if we activated the line item display for the particular G/L account in between the Posting period
Thanks,

Hi,
You can check below two programs
RFSEPA01 - for line item display
RFSEPA02 - for open item display
Steps to follow:
1. Block the G/L account from posting
2. Run both programs
3. Unblock the G/L account
this will make the earlier posted items visible.
Regards,
Jyoti

IPhone will not display calendar items more than one day in advance.

iPhone will not display calendar items more than one day in advance.
I used to have a droid and loved the calendar on the main screen that used to show me the next few appointments coming up - so far I have only figured out how to put in to show for next day or 2 days or etc....
is there any way to show tomorrow and next few days in notification, or is there a good app out there that will greet me. dont have 4s to ask just a 4
i used google calendar and they all show up in calendar but REALLY need the functionality to see what is coming up, kind of like what you see in outlook or any other email program.
please help out this noob.

Is this what you're doing:
OS X Yosemite: Recover your entire system

Display Line Items - Define Line Layouts?

I cannot understand what Define Line Layouts means in SPRO.
Financial Accounting -> General Ledger Accounting -> Line Items -> Display Line Items -> Define Line Layouts
I can see that there is some Line Layout Variant (D0,D1D2...), with some Fields, but i cannot understand where this fields or Line Layout Variants are used, in what transactions i can see changes if a made some. This variant reflects line layouts when i post something (f-02, ,f-03, f-04, f-51...) or when i want to see account items or balances ???.

Hi,
You can use these line layouts in the display of line items in various transactions and you can default a particular line layout for a user master, so that by default the line items comes in that layout for that user.
Go to FB00 > Doc Display tab and there you can assign the line layout
And then when you see the doucment say in FB03, you will see the line items in that format.
Regards,
SDNer

USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

Greetings;
This seems to an ongoing issue (see related discussion link). We've been experiencing the same update lag since last Friday. The new additions to the Collection appear and are accessible in both the iPad and iPhone applications, but even though they additions appear in "Quick View", the material doesn't appear in the Collection itself. Apple is aware of the issue and is investigating. All the best...
Syd Rodocker
Tennessee State Department of Education
https://discussions.apple.com/message/15461971#15461971

Discussion Forum does not display the items in Answered question ,Unanswered question views.

Hi All,
Discussion Forum does not display the items in Answered question ,Unanswered question views. Please find the below screen
what is the difference between Answered and unanswered view?
I have marked the discussion as question .
have replied for the question those discussion are visible in Unanswered view and the answered view is showings as no item to show.
Below screenshot is answered questions view.
Can you please help on this .
Thanks in advance ,
Sunitha

The discussion in which at least one of the replies is marked as "Best Reply" will show in the "Answered Questions" section.
Blog | SharePoint Learnings CodePlex Tools |
Export Version History To Excel |
Autocomplete Lookup Field

Depreciation not displaying line items

Similar Messages

Maybe you are looking for