Depreciation posting AFAB - status canceled

Hi,
I run Depreciation posting AFAB as test run. Processing completed without errors.
Next I run AFAB .I have diagnosis
u201CThe last posting run in period 010 2009 was terminated by an error.
Before any more posting runs are performed, you must restart the posting
run for period 010 2009u201D
Next I executed AFAB using the Restart parameter. Process has again statusu201Dcanceledu201D.
In Job Log is written u201CLine item 001 already exists in document Company Code 10001111 2009u201D
I add, I executed change the year AJRW before them
Could any one please help on this error?
Rgds Stenwa

I've done it with REPEAT , my error:
Last posting run terminated (Restart in period 2009 010)
    Message no. AA730
Diagnosis
    The last posting run in period 010 2009 was terminated by an error.
    Before any more posting runs are performed, you must restart the posting
    run for period 010 2009.
Procedure
    Start the posting run for period 010 2009 again using the restart
    parameter.

Similar Messages

Asset Depreciation Posting - AFAB

Hi,
I have executed Depreciation with Test run in AFAB Transaction Code, it says Document Created. But when i execute the Depreciation run through Back ground process, it is not upadating the Depreciation GL account. Please guide me on this regard.
Thanks
Sivanand

Dear,
Sivanand.
Please check the T.code AFBP which is more reliable than SM37 log. If you have any inputs please provide as said in rest one thread so that any one can guide you to understand the situation.
AFBP shows the depreciation posted log. The report accesses the ANLP log table that was created during the depreciation posting run, and makes it possible to later ananlyze details of depreciation and account assignment per asset. By double-clicking on the document number, you can also jump to all accounting documents that were generated.
I hope this help clears you the issue. If you have any doubts please share.
Regards,
Pankaj A Bhalerao.

Error in Depreciation Run - AFAB

Hi All,
When i run the depreciation posting(AFAB), except one document others got posted.The error document says that it cant be posted as it is blocked by other user.
Depreciation documents are generated automatically by the system during the batch processing and how can it be blocked?
Plz help me out in this .
Thank You
Regards
Andrew

Hi,
To check which master data is blocked go to the session of AFAB and select the programme and go to the Job Log button in SM37 transaction code which will give the list of the error and who has blocked it.
Hope this helps,
Thanks and Regards,
Gokul.

Posting depreciation run (AFAB) for profit center

I have 3 plants and each plant is created as separate profit center.
All plants want to run and post depreciation independently. So i wanted to know if AFAB (depreciation posting) can be executed profit center-wise.
Please advice

There are no SAP notes.
Because we are looking something beyond the original design of the system.
You can post the depreciation per company code, but not for profit center. In AFAB, you cannot get profit center selection screen.
As a statistical object, finally your profit center gets the postings, which you can view them in the report.
But, if you want to run AFAB based on profit center selection criteria, then, it is NOT possible. There is NO SAP notes for that.

Error when run Depreciation Posting Run AFAB

Hi,
I found error when run Depreciation Posting Run for period 7 2007.
FYI. I had run Unplanned Depreciation (TCode: ABAA) with document date 31.10.2007 and posting date 31.10.2007, trans. type 640. After that, i want to run Depreciation Posting Run (TCode: AFAB) with fiscal year: 2008, posting period: 7, reason for posting run: repeat. Select on Test Run. Then i found error message as below.
Error Message:
Documents manually posted within dep.doc.number range
Message no. AA728
Diagnosis
In the number range interval for the document type for posting depreciation, a document has been posted which was not created within the framework of depreciation posting. The last document posted by depreciation posting was assigned the number .
Procedure
Contact your Systems Specialist. When changing the number range interval for the document type in depreciation posting, you have to specify a new interval in which no documents exist. Using organizational measures, you can guarantee that there are no documents apart from those created by depreciation posting in this number range.
Can any one help how to solve this issue?

Hi Paul,
Now I go to TCode: FBN1 - Accounting Document Number Ranges, then i want to change the range for year 2008.
No Year From No          To No           Current No          Ext
03 2001   0300000000   0399999999   -                          /
03 2002   0300000000   0399999999   -                          /
03 2003   0300000000   0399999999   -                          /
03 2004   0300000000   0399999999   -                          /
03 2005   0300000000   0399999999   -                          /
03 2006   0300000000   0399999999   -                          /
03 2007   0300000000   0399999999   -                          /
03 2008   0300000000   0399999999   -                          /
03 2009   0300000000   0399999999   -                          /
Referring back to Asset Accounting, the Reference Document: 19.
Do it mean that my FI doc. no is 0300000019 ? I bit confuse on this..
Can you guide me more details on it?
Thanks in advance.
Edited by: Nur Aman Abdul Manap on Apr 15, 2009 2:09 AM

Depreciation posting run ( afab)

Dear All,
While Depreciation posting run using tran. code ( afab ) i.e SAP Standard transaction,
to execute in foreground Following message appear .
! This processing can only be carried out as background processing !!
If I run in background program run successfully.
It is possible to run the program in forground.
Previous SAP version ECC 5.0 this program was run foreground also.
Please reply me any solution for the same.
Reagrds,
Santosh

When we run the program in Background following Error obseved in some documents.
NOT POSTED 2 3000 SKGE 23602 ERROR00001 Ordinary deprec. 451,317.00- 0.00 -451,317.00 451,317.00- INR
NOT POSTED 3 5000 HOGE 11402 ERROR00001 Ordinary deprec. 361,699.00- 0.00 -361,699.00 361,699.00- INR
Now Please suggest How to rectify this Error.
But in SAP 4.6 , Program run in foreground and we will get the Exact Error message and system response as to How the Error can be corrected.
In Background with Spool nothing has to be done.
Regards,
Santosh

Testrun error in posting depreciation run (AFAB)

Dear All,
I got testrun error when I posting depreciation run (AFAB) so I have checked acc.dep as technical massage everything look find. I think it need more config in somewhere. Anyone please suggest me how to fix this.
Account 'Acc.dep. accnt.for ordinary depreciation' could not be found.
     Message no. AU133
Diagnosis
     When creating the accounting document, the system could not find account
     'Acc.dep. accnt.for ordinary depreciation' for company code CC00.
Procedure
     Enter this account in the account determination for Asset Accounting.
Thank you so much in advance.
Best Regards,
Utarat.P

Hi Utarat,
additionally usefull information in the following link:
Error AU133 Account 'Contra account: Acquisition value' could not be found
Regards Bernhard

Park and Post for Depreciation Run - AFAB

Hello Experts,
We have around 15,000 assets in our company code. We have requirement that, asset management team will check the depreciation and execute the depreciation for all 15000 depreciation. However at this time, FI postings should not be available.
Later the finance team will re-check the depreciation on test check basis and post it to FI. Trial balance will be updated.
In short, I require park and post for depreciation run in SAP.

Hi Meena,
You can verify planned depreciation in Asset report S_ALR_87011990 and do not tick depreciation posted check box and give report date as the last date of the month you want to verify.
It will give depreciation planned details up to the month in the field dep for the year.
After verifying this you can run AFAB then check the same T code and this time tick depreciation posted check box. Now it will give you depreciation posted.
There is no parking concept in Asset module.
Hope it solves.
Regards,
GSR

How to revrse the documnt posted through the Depreciation run AFAB

Hi,
Please advise, how to revrse the documnt posted through the Depreciation posting using tcode AFAB.
Thanks & Regards
Jai

Hi JayChandra
Hope I gave my reply vide your earlier todays thread Re: How to reverse the document posted through AFAB(Depreciation run)
Please check The answer is
You can not reverse
Make your correct changes in Asset Master/Depreciation data and rerun AFAB
System posts the difference

Reverse the planned depreciation posted through AFAB

Hello Experts,
Kindly give me the solution to reverse the posted depreciation through AFAB ASAP.
Our financial year is January to December.
We want to reverse the depreciation posted for the month of 03,2011

Hi
You can use one process as mentioned below
Step 1: Create a Depreciation Key having Zero as depreciation percentage
Step 2 : Assign that Depreciation Key into Asset Master
Step 3: Then go to Depreceiation TCode AFAB & Select the Repeat Run Radio Button for the selected Asset
Step 4: Run the Depreciation
Hope through this process you can solve your problems
Regards
Praveen

AFAB - Depreciation Posting Run Error

When I tried to execute the Depreciation Posting Run, I get the error message "Internal error with background job scheduling RAPOST2000"
Hv anyone face this problem before? Pls help!
Thanks.

Thanks~ I checked with my colleague, he told me that the user is lost few objects in the role. This included the User Authority and the program objects.
After he added the objects to the user's role. The issue is settle.
Thanks~!

Depreciation Posting in AFAB (urgent Pls)

Hi All,
pls let me know y the depreciation posting is not hapenning when it is showing Document created in Test run. It is not showing any errors nor is it posting. urgent pls.
Chatura.

Hi,
Thanks for replying. It did not create any RABUSH Session .
1) I created an Asset and gave the Depreciation Start date as 01.09.07.
2) then i posted an entry in F-90 with transaction type 100, on 01.09.07.
3) The periods are kept open only.
4) The number Ranges for AF Document exists.
5)i did an unplanned posting run for 1 to 8 periods. for 9th period i did the Repeat run . It generated an accounting entry with AF document type.
6) now if i'm trying to do the test run for 10 th period it shows that the Document is created but in the repeat run it is neither posting the document nor is it showing the error.
I was not able to analyse the reason.
Pls help me out. Also pls let me know where to select the direct FI posting in asset accounting. Points will be awarded infull if the issue is solved.
Regards,
Chatura.

Depreciation posting through background

Hi,
When i am trying to run depreciation through AFAB with repeat option for specific assets, with output device LP01 and option immediate it shows message "Background message was scheduled for program RAPOST2000". Secondly in the tcode sp02 it shows spool no. but status as " - " & it does not post any entry for depreciation. When I click on spool no. it shows refer to error log & list contain no data
Regards
Sanjay

Hi,
This is common problem faced during depreication runs.
Please check the error log in detail, it will mention which asset numbers are having problem, or any account determination is not assigned to a GL code.
After doing corrections, schedule in background again.
Thanks & Regards
Sanjay Marathe

Depreciation Posting Run Error

i'm trying to run depreciation posting for company code X from AFAB. but during test run i got the following error message;
"Field Bus. Area is a required field for G/L account MEYA 2572530000"
however all asset's "field area" are filled by a value. what may cause this problem.
thank you for your help

hi,
pls make business area as a optional in the field status variant by using t.code obc4
Thanks
phaneendra

T code reqd for External No range which is reqd at the time of posting AFAB

Hi Gurus,
While i am running AFAB,the system shows that i have to give external no range for doc type.I have given no range in FBN1 but system denies.Can pl provide T code for external no range which is reqd for Depn run.
Pl advise.
Regards,
Samar

Hi Guru,
Thanks for your reply.
After running AFAB,follwing error comes:
"Create document number range 24 using external number assignment.
Message no. AA759
Diagnosis
Processing had to be terminated, since you set up the document number range 24 for the year 2008 with internal number assignment.
System response
You should create a document number range with external document numbers for periodic depreciation posting, since the document numbers are not assigned from Financial Accounting, but by the posting program of Asset Accounting. The external number assignment, therefore, should not be understood as manually entering the document number. It is only external from the point of view of the Financial Accounting application.
Procedure
Change the number range 24 from internal to external number assignment in Asset Accounting Customizing."
Now pl advise me how i can change no range from internal to external.
Regards,
Samar

Depreciation posting AFAB - status canceled

Similar Messages

Maybe you are looking for