Depreciation run 'stuck' in a closed period

Dear experts,
I have the following issue (PROBLEM )
Depreciation ran in Jan - no issues. Dep keys for 2 assets were updated in Feb from 0000 to an automatic key Z..., as a result depreciation was recaclulated as of Jan. Then user, by mistake, ran depreciation for Jan again to 'catch up' deprn on these 2 assets. He got an error log - period 01 is closed, which makes sense. In aw01n Jan now shows as green - posted, but when you drill down you see that Jan depn has not been posted and you see the error log again
Now the user is trying to run depn for Feb and gets the following message: Sorry, you had a run that was cancelled in Jan, you have to restart Jan first before posting Feb. There is no way Jan can be opened.
What I've tried:
changed key back to 0000, run AFAR to recaclulate deprn back to zero for these 2 assets, hoping to re-run AFAB for Jan for these 2 assets to get zero and have depn unstuck...didn't help.. still get an error message - period 1 is closed.
Please advise...

Thanks Bernhard -
What is the difference between XBUKZ: 1 Restart Batch-Input and XBUKZ: 0 Restart Setup ANLP. And how to restart TABA? thought that new depreciation run uses the "direct" update of the depreciations via the accounting interface, not batch input like old depreciaton run, so was surprised to see description of XBUKZ: 1
Another question: if the period is opened wouldn't it be easier to run depreciation in period 1 in restart mode?
I was considering to delete records from ANLP - planned derpn and to be posted depreciation... tested it, works okay (delete records, restart depn in closed period 1, no errors, no documents posted, period 2 planned depreciation can be posted. Not sure what is better from the SOX point of view - open closed period or update internal table in prod....:-(
Thanks a lot for your reply...
Elena

Similar Messages

FI-AA : Problem in Depreciation Run and Year end closing.

i am doing asset year end closing and new fiscal year open, i followed the steps as followings..
Step 1 Did depreciation run using T-code AFAB- no error
step 2 checked depreciation run in AFAR was correct(no error)
step 3.did actual run of new fiscal year open using tcode AJRW.
step 4 : did actual fiscal year closing t-code AJAB.
but now the problem is still i am not able to see any asset reports when open the report meg. says "fiscal year change not done for company code xxxxx"
problem due to is any patch need to be executed? or due to any other application error?, pls advice to solve this my issue.
with best regards,

Hello
Choose Periodic processing ® Fiscal year change.
Enter the company code and the new fiscal year.
Choose Program ® Exec. in background.
Process the assets with errors that were identified during the fiscal year change (Tools ® Assets with errors).
Reg
*Assign points if useful

Depreciation run for left out periods

Dear Friends,
For the FY 2008, the depreciation run has been completed till period 8. Now from period 9 to 12 i have to run depreciation. Please help me out to find out how can i do so.
Which peirod should i input in posting period field and which radio button has to be activated (ie. planned posing run, repeat, restart, or unplanned posting run) in tcode AFAB.
Now i want depreciation amount to be reflected into each and every month respectively. ( ie. sep, oct, nov, and dec) instead of all amounts to be posted into single month say dec.
Thanks and Regards,
Payal

please search or read the documentation first. this has been covered 9,452 times before.

Can SAP run the depreciation for closed Period and posting to diff month?

My client forgot to run the depreciation for Jan 2011, and now the Jan period has been closed and report also done.
My solution was to re-open the Jan and does the depreciation, once completed reclassify Jan depreciation posting to Feb 2011 manually.
I am just wandering whether SAP can handle this different way.
Can SAP performs Jan (Closed Period) depreciation and post to Feb period automatically or any other suggestions?
Cheers

Hi
Yes, you can do that
Follow this thread... Unable to post depreciation- Error AA730
Using ABF1, you can do it
Br, Ajay M

Adding asset in the previous period and depreciation run

Hi Experts,
I want to know whether we can add an asset for the previous period and run the depreciation.
I will try explaining with an example.
Let us say,I forgot to add an asset and i want to add an asset now with date as 1st July 2008. Is it possible? If it is possible will the system calculate the depreciation from July or will it calculate from the date the asset has been added?
Please explain.
Thanks,
Sasidhar

Hi
It will allow you to add a new asset in the closed period with few conditions
Since you have given in your example as july 2008, check whether your FI year is open. Then check the asset period whether its opened are closed
If all the periods are not resticting you, you can go a head with adding an asset
Your depreciation will be calculated from the date of purchasing, that means only the calculationg will happen from that period and not the accounting entry
You will have only one planned depreciation from july to current period as per your example. So when your running the planned depreciation run for the current period, the entire depreciation will get posted now
You can do repeat run only for one period prior to the current planned period and not at any prior period
So with your example of july 2008, if your running AFAB monthly, repeat run may not work
Warm Regards
Bala

Depreciation Run for closed fiscal year

Hi All,
We bought some assets on 2005 through direct purchase and these assets are in under operation, but not having the asset master record in the SAP system.
Now we have decided to bring these assets into the system as the capitalised date is 10 Nov 2005 and for this purpose, we had created the asset master record and applied the t.code: ABNAN to post the values to these assets.
<b>"My concern is about how to provide the depreciation run to these assets for the closed fiscal year from 2005 to until Nov 2007.The present closed period in the production system is 2006".</b>
I request you to all kindly give your values on the above mentioned issue.
Thanks with regards,
Ran

Hi
Just give the dep start date as 10 Nov 2005 and run the dep for the current posting period the depreciation will get posted for the year 2005 and upto the current period,in the current posting period.
As the past reriods are all closed you cannot post dep in the year 2005.
You will have the whole dep for that particular asset posted in the current posting period.
Hope this helps
Good Luck
Hari

Depreciation run after adjustment in period 14,2007

Hi,
My user has posted adjustment to an asset in period 14. All other periods are closed. Period 13 is already closed and cannot be opened again. And actually, we have run depreciation in period 13.
However, when we want to run depreciation in period 14, system prompt error message and ask to restart run depreciation in period 13.
I am in version ECC5.0.
Now I am confused as the depreciation run is automatically released and therefore, we cannot release the batch in foreground and change the period manually.
How can I resolve this problem?
Thanks.
Rgds,
Nik

Hi Nik,
we solved a similar problem as follows:
1.) Open period 13 again
2.) Run depreciation with "restart" in period 13
3.) Cancel FI document in period 13
4.) Close period 13
5.) Post FI document in period 14 manually
Maybe this will help you solve your problem!
Best regards,
Walter

Depreciation Run executed for a period but no posting found

Dear Experts,
I have checked a few of the FA in the Fixed Asset Master, and confirmed that they have not been depreciation run yet for period "2009-02". My current period is set to "2009-02" as well.
But when I tried to run depreciation run for "2009-02", I always get no posting.
What could have cause this problem?
Much Thanks in Advance!
Warmest Regards,
Chinho

Hi Chinho,
1, please make sure there is APC value for the asset. Means:
acquisition was created for the asset. You can check it from FA master data->document tab
Or the asset was imported into system with a APC value.
2, If the acquisition/import was done before current fiscal year, please make sure 'fiscal year change' to current fiscal year was done.
Regards,
Ivy Zhang
SAP Business One Forums Team

Depreciation run with special period

We require 2 set of FS reports:-
1.) FS as at 14/12/2007
2.) FS as at 31/12/2007
We have use the following period to derive the the reports
1.) Period 12 (Transactions 1st - 14th Dec 2007)
2.) Period 14 ( Transactions 15th - 31st Dec 2007)
Q1.)Should Dec depreciation run on period 14?
Q2.) If yes, will the depreciation run capture the depreciation from 1st - 31st Dec 2007?
Q3.) We have tried to run Dec depreciation in period 14 but error "According to the posting cycle, you should post period 012 next."
Pls advise
1.) Steps to run Dec 2007 depreciation in order to capture the whole month depreciation.
2.) Which period to open in OB52.
Kindly assist as this is urgent. Points will be rewarded. Thank you

Dear Hari,
Thank you for the helpful points. Rewarded.
FYI, our cut off date is 14th Dec 2007. Any transactions after this date will go to period 14. In OB52, we set only period 14 open to block user from posting to other periods. Will this affect the depreciation run (given scenario where we run AFAB for period 12)?
When we run AFAB for period 12, this is the error we get:
Period 12 is not allowed
Message no. F5567
Diagnosis
The period entered (12) is different from the period calculated (14) and is also not in the interval for special periods (013 to 016).
System Response
Error.
Procedure
Correct the value entered for the posting period.
What shoud we do?

Depreciation run For Period 2

Dear All,
Currently am configuring a simple scenario of asset configuration fop book depreciation
i have done the depreciation run ( Both Test Run & Back ground Processing ) for the period 1 and the posting was done successfully
when i went for the depreciation run for the 2nd period no documents are generated ( Tried Test Run ) and no error message is displayed
Can any one help me solving this issue
Regards
Arun.R

Run the report in test mode without Error Analysis and List assets on.
When this not helps look to your asset if there is plaaned depreciation for period 2

Posting an unplanned depreciation run for the previous period

Hi SDN forum,
May I just ask if it's possible to run an unplanned posting run for a previous period wherein the depreciation run has already been executed?
The scenario is more like a "repeat unplanned posting run"
I can't seem to include this unplanned depreciation whenever I select the repeat run for the previous period.
Please help.
Thanks

Hi
Through T.Code: ABAA you can able to post unplanned dep for previous period.
Executing AFAB for previous
1 - open FI Periods (OB52)
2 - Post Unplanned Dep T.Code: ABAA
3 - Run AFAB with Repeet run & Test run
you feel it is ok with test run execute production run
Regards
Viswa

Error in Depreciation run for 7 th period

Hi Guruu2019s
When we run depreciation run year 2008 for period 7 has failed with the following error :
Account 'Accumulated dep. account unpl. deprec.' could not be found.
however it has posted to few assets and not posted to few assets, when I checked in the log for posting run there is a message saying that u201Cthere are error in the posting run.after correcting, restart the run.
u201C2documetns were createdu201D
If I go to previous log for posting there is no error message and it says with green signals that 3 documents were created. From 1 to 6 periods, in every log says that 3 document were cresated
Only this particular run says 2 documents were created.
Any advise?
Thanks in advance
Regards
Sunitha,

It looks like that in period 7, you do the first "unplanned depreciation". That's explain why the error only happen in period 7.
The problem happens because GL account for "unplanned depreciation" is not created.
Try to check in t-code : AO90 => Choose your Chart of Account => Choose Account determination for asset class in which you did the unplanned depreciation => Choose Depreciation => Check all GL accounts assignment in "UNPLANNED DEPRECIATION ACCOUNT ASSIGNMENT".
Then check in t-code :FS00 whether the GL Accounts (in "UNPLANNED DEPRECIATION ACCOUNT ASSIGNMENT) are exist or not.
If the GL accounts are not exist then you should created the GL accounts first. Afterwards, try to running the AFAB again using "Restart".
Good luck.

Depreciation run show different period

My OAAQ result is 2008, I create and capitalize one asset in Apr. 2009, the depreciation method is straight line, The planned depreciation for May 2009 is 9 dollars. but when I run AFAB,
it shows no result (the list contains no result), the detail is :
Posting date : Date created: 22.12.2009 Period: 2009/001/01
I also run depreciation for Jan 2009, the same result.
how can I do AFAB?

Hi,
from your description you run the depreciation run for period 1. Execute it in period 5 (if this is may) as an unplanned depreciation run, that´ll should do.
Regards,
Markus

Closing fiscal yr 2007 without depreciation run

Hi All,
Can anybody suggest me how can I close fiscal year 2007 in AA without depreciation run ( as we have posted Depreciation through BDC directly to hit GL).
thanks,

Dear ap
can we run depreciation in 16 period for all (1-12 period)in a single run through AFAB. as we have allready close 2007 as per audit .
thanks
with reagrds

Effects of reopening closed periods in Asset Accounting.

Hi SAP Gurus,
My client wants to open the closed periods in Asset accounting. I have used T Code OAAQ and changed the last closed period.
I would like to know what are the effects of opening the closed periods.
Will it effect the already posted depriciation and what further steps should I take after the entries are passed.
Even after I opened the period both in FI and AA it still is giving me a message that I cannot post to this year.
Can you kindly suggest.
Thanks in advance,
Hari

If you post any entries to the asset , the depreciation will change in asset accounting and will not match with the general ledger unless depreciation posting run is executed.
However, since you have already executed depreciation posting, AFAB selecting repeat run in the last period or special period if your company code have special periods.
Caution: It will change the P&L and Balance sheet balances.
Please check the Post Capitalization Option (ABNAN) for asset values missed in the past for capitalization

Depreciation run 'stuck' in a closed period

Similar Messages

Maybe you are looking for