Depreciaton run terminated(restart period 2011 002

Hi Everyone,
I have an issue with the Asset Dep run for the period 3, It is not creating any documents in dep run in the T code AFAB.
Please clarify
thanks in advance
Sree

Hi everyone,
Actually If we have assigned the Accounts in table T095b in Ktaafb, that would solve the problem of posting of depreciation to the the correct area, But the user does not want to do so he want s to check  how to remove the transactions that were posted wrongly. If we configure those GL, I think system may pass debit and credit entries to nullify the account.
thanks
Sree

Similar Messages

  • Last posting run terminated (Restart in period 2011 010) _ Depre posting

    Hi
    I am trying post depreciation for the month of October 2011 for an asset.
    I am getting the following error:
    Last posting run terminated (Restart in period 2011 010)
    Message no. AA730
    Diagnosis
    The last posting run in period 010 2011 was terminated by an error. Before any more posting runs are performed, you must restart the posting run for period 010 2011.
    Procedure
    Start the posting run for period 010 2011 again using the restart parameter.
    I checked OB52 and the settings look ok.
    Any idea what might be the reason for the error?
    Thank you in advance
    Regards
    Vedavatee

    i checked in TABA
    and found:
    Client         Co Code    Fiscal year     Posted up to  No. of posting runs FROM Doc.No.     To doc.no.     Document posted
    123     ABCD     2011     008     01          0000000001     0000000001              N
    123     ABCD     2011     009     01          0000000001     0000000001              N
    123     ABCD     2011     009     02          0000000001     0000000001              N
    123     ABCD     2011     009     03          0000000001     0000000001              N
    123     ABCD     2011     010     01          0000000001     0000000001              1

  • Depreciation Run -"Last Posting run terminated Restart in period 03 2010"

    Hello Friends,
    Please help me for this. I am trying to run depreciation for a CoCd 2002 in
    production. When I do AFAB
    for FY 2010 Period 04. It gives a error message "Last Posting run
    terminated, restart in period 2010 003"
    Diagnosis*
    The last posting run in period 003 2010 was terminated by an error.
    Before any more posting runs are performed, you must restart the
    posting run for period 003 2010.
    Procedure
    Start the posting run for period 003 2010 again using the restart
    parameter.
    After this I run AFAB (03 2010) using the Restart radio tab, it runs ok in
    Test and w/o Test (i.e in backgrond),
    when I check SM37 - it shows a program RAPOST2000 is finished. Then I am
    able to run AFAB for (04 2010)
    in test and background also. Again a program is there in SM37.
    But when I try to run for period 05 2010 - it again shows the earlier error
    " "Last Posting run terminated, restart in period 2010 003""
    You see the error message comes again.
    Can someone suggest me a solution. Do I need to go sm35 and process the
    Batch I/P session . Why this error is
    coming up?
    Regards,
    George

    Hi George,
    please look at table-field TABA-XBUKZ.
    If there is a  "1" it means "Restart" necessary.
    If you have the restart sign you have to solve the error and after the restart the TABA-XBUKZ shoudl change to "X".
    regards Bernhard

  • Last posting run terminated (Restart in period 2010 001)

    HI,
    There is the challenge issue for Depreciation run in AFAB,
    While running the depreciation for the month of jan month system never allowing to post.
    After the upload of assets through BDC, this is the first time we are trying to run  the depreciation
    Also, in the test run, some times documents are created and for the same input parameters, if the test run is executed again, the below error appears.
    Job started
    Step 001 started (program RAPOST2000, variant &0000000000027, user ID TRAINING1)
    Last posting run terminated (Restart in period 2010 001)
    Spool request (number 0000010067) created without immediate output
    Job finished
    Can somebody help on this issue...
    Thanks & Regards
    Rajesh Kumar.S
    09620791110

    Hi Rajesh,
    Please check the depreciation (production run) log in AFBP by inputing Company Code Fiscal Year and period. This will provide you mored details of the error as to why the depreciation run went into error.
    After the errors are rectified, please run AFAB in restrat mode, this will resolve your issue.
    Thanks!!!
    Murlidhar Khatri

  • Last posting run terminated (Restart in period 2008 12)

    One Week ago we upgraded from SAP 4.6 to ECC6 and implemented recommendation in note 890976 (in transaction FBN1 I have set the accounting doc. 03 to internal number range determination). The first period (11) we executed the depreciation run for appeared to run successfully but for the second period (12) we are receiving the message "Last posting run terminated (Restart in period 2008 012)". This message will appear each time we run the depreciation for period 12.
    When I run transaction ARMO, I get the error "Document number 2100 300000001 2008 was already assigned
    Message no. F5152"
    In Transaction FBN1, we can no longer set the number range to external and the current status for company 2100 is 300000000.
    Can any one assist with resolving this issue?
    Thanks,
    Nicholas

    Ran some test in our QA system and found the solution. Changed the status number from 30000000 to 30000050 using transaction FBN1. Everything appears to be working now.
    Edited by: Nicholas Archer on Sep 15, 2008 11:56 AM

  • Posting run terminated AFAB

    Hi All,
    When I post dep. with AFAB for the period 3 the error follows:
    LAST POSTING RUN TERMINATED(Restart in period 2011 002)
    When I restart post dep in AFAB
    Background job is in finished status with no list, but it say's "document posted in restart" but no document is created.
    Thanks in advance,
    Sreeni

    Hello Sreeni,
    I assume you re receiving message AA730, isn't it?
    as note 174300 describes error AA730 is caused by improper handling
    of the incorrect depreciation posting run.
    Please review the Consistency Check Report FI-AA Customizing
    and correct the errors.
    Go to the IMG ->
    Financial Accounting -> Asset Accounting -> Preparing for Production
    Start up -> Check Consistency ->Consistency report: FI-AA Customizing
    Please review carefully the attached notes 174300, 193984 (this
    note describes possible reasons of issues and how to correct it).
    br, Guido
    Edited by: GUIDO BONI on Apr 11, 2011 4:03 PM

  • Message no. AA730 Last posting run terminated

    Hello,
    I loaded incorrectly assets (asset class land) with depreciation key but for a land there is no account determination.
    I´ve deleted the incorrect assets and when I run the depreciaton I´m receiving the error message Message no. AA730 Last posting run terminated Start the posting run for period xxxx again using the restart parameter.
    When I run the Restart there is the error message Message no. AU101 - There is no data record which meets the selection conditions specified.
    Is there any correction programm.
    Thanks

    Hi, it´s testing client but I can´t to delete the line item within one company code. I´ve found out the table ANLP has still value even I deleted the assets. Is there any transaction or program to delete ANLP entries with determination of Fixed asset No (one asset No not all table). I cant to go and delete directly in a table.
    Thank you a lot

  • Error "Last posting run terminated"

    Hi Experts,
    When I tried to run the depreciation for Nov, I encounter the error "Last posting run terminated.  Restart in period 2009 010",
    But when I tried to restart the depreciation for October, I encounter the error Account 'Expense account for ordinary depreciat.' could not be found for area 01.  When I checked the assets, I can see in AW01N, that it has already posted a depreciation for October.  Why then would it ask for an expense account for period 10 when it has already posted a depreciation last October.
    Thanks to advise.
    Regards,
    Thess

    Dear,
    Just check account assignment in AO90 if G/L for 'Expense account for ordinary depreciat.' has not been changed. And also see the change document for more clarity.
    Regards,
    Chintan Joshi.

  • Posting only possible in periods 2011/11 and 2011/10 in company code 4000

    Hi All Experts,
    I have encountered with this error while doing MIGO.
    Posting only possible in periods 2011/11 and 2011/10 in company code 4000
    Message no. M7053
    Diagnosis
    The posting date entered is not within one of the permitted posting periods (current period/previous period).
    This can be due to one of two reasons:
    The correct current period has not been set in the system.
    For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
    You have entered a wrong date in the field "Posting date".
    Procedure
    Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed.
    I have checked OB52, OB29, OB37, MMPV, MMRV. All possible T.codes and threads I tried from SDN itself, still no luck ! In OB52 I have opened 2011 & 2012 year open absolute.
    Would like to share MMRV settings :-
    Current Period : 11 / 2011
    Previous Period : 10 / 2011
    Last period in prev year : 12 / 2010
    We have India based client so fiscal year variant is Apr to March copied from V3.
    Will be very much appreciable experts guidane !
    Regards,
    Sharvari Joshi.

    Hi All Experts,
    I raised the OSS, and here which I got the reply from SAP.
    There is a possibility to run the report RMMMINIT to initialize posting
    periods. Please bear in mind that the valuation data of the previous
    period could get affected.
    If you decide to proceed with the process, please review the
    documentation of program RMMMINIT.
    Please also review attached note 70545 regarding the initialization
    process. Although this note is NOT valid for your release, it provides
    good information on the use of initialization for correction purposes.
    Additionally, please review attached note 369637 in this regard as well.
    PLEASE FIRST PERFORM THIS IN A TEST/DEVELOPMENT SYSTEM PRIOR TO MOVING
    TO PRODUCTION AS YOUR VALUATION DATA FROM PREVIOUS PERIOD WILL BE
    AFFECTED. If you are satisfied with the results, then you can move it
    to production. Please perform this at your own risk as this hotline
    will not support any problems arising out of it.
    Related the error message MM016 please follow the steps from note
    487381:
    To reserve the parameter use transaction SU01 for the user's name who
    executes the RMMMINIT program. The parameter must be set as follows:
    Parameter Value
    MMPI_READ_NOTE YYYYMMDD (for the current date)
    I am not able make out any meaning out of it. Can anyone please understand me this ?
    Help will be appreciated !
    Reagrds,
    Sharvari Joshi.
    P.S : Steps from my side which I performed , I changed the parameters for my ID in SU01 to current date 2011.11.16 (YYYYMMDD) and running MMPI still same error.

  • 10.3.9 - Unable to run Terminal

    When I attempt to run Terminal, the icon appears ever so briefly in the dock, then disappears. Any ideas where I should start my troubleshooting to figure out why the app won't run?

    Welcome To  Discussions ENDelt260!
    Have you ever been able to load Terminal?
    Navigate to HD > Users > Your Account > Library > Preferences:
    In there, locate and move to the Trash, this file com.apple.Terminal.plist.
    Run Repair Permissions.
    Restart the Mac.
    Try Terminal again.
    ali b

  • Getting this:You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?

    I am getting this message: You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?
    is there a way to install this update?

    Hello
    More information would be useful, for example which Mac OS are you running.
    On the left menu item  About this Mac provides useful information.
    Also did you use Software Update to determine the update?
    Using Software Update can ensure you download and install the correct package for your particular Mac and OS version.

  • 10.6.7 and 2011-002 built in or seperate install?

    Hey guys,
    This should be a simple question, but is the 2011-002 security patch or the 001 included in the 10.6.7 update? Or is it a seperate install?
    I would  think its a seperate install but when i run apple update (i am running 10.6.7 server) it does not show the update.
    Thanks!

    There is no server sec update for SLS.  Leopard has a security update for both client and server (and they are BIG files), but SL just has the client 2011-002

  • I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

    I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
    The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
    PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

    Office 2011 is not compatbile with Exchange 2003.
    I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
    http://answers.microsoft.com/en-us/mac

  • This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on a terminal server

    Hi All,
    I have Citrix VDI (Virtual Desktop Infrastructure) Implemented
    in my company and installed few Applications on App Server lets say.... MS Office 2013, filzialla, putty, etc...
    I assigned these apps to the users through CITRIX STUDIO, when I try to use these apps. on VDI everything is working fine only when i tried to open Word, Excel or Powerpoing, outlook it throws error as 
    ""This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on
    a terminal server"" and apps gets closed.
    Please help me on this ASAP.
    Thanks & Regards,
    Sachin Shinde

    Hi,
    As mentioned in ths article below, run for Office 365 products on to a Remote Desktop Session Host server is not supported. You can install Office products for Office 365 to a virtual desktop, but the virtual desktop must be assigned to a single user.
    http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx
    Regards,
    Melon Chen
    TechNet Community Support

  • Dump error while running termination action

    I'm facing a dump error while running termination action, please, if some one wud help me out of this error. here when im termination action the system is opening action infotype when given the date of termination and try to save, system shows a warning message that "Record valid from 08.08.1995 to 31.12.9999 delimited at end" then I press enter and system is asking me to save. when I do so, rather than it taking me to another screen its throwing a dump error.
    Runtime Errors         SYNTAX_ERROR
    Date and Time          21.10.2008 18:54:05
    Short dump has not been completely stored (too big)
    Short text
         Syntax error in program "SAPLCACS_BU_PARTNER ".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
         The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
          include "LCACS_BU_PARTNERU44 " in
         line 19:
         "The key of internal table "LT_BUT0BK" contains components of type "X" "
         "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
         "r such tables in a Unicode context."
         The include has been created and last changed by:
         Created by: "SAP "
         Last changed by: "SAP "
         Error in the ABAP Application Program
         The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
         The following syntax error was found in the program SAPLCACS_BU_PARTNER :
         "The key of internal table "LT_BUT0BK" contains components of type "X" "
         "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted for
    "r such tables in a Unicode context."
    ger Location of Runtime Error
    Program                                 SAPLBUD_CHECK
    Include                                 LBUD_CHECKF01
    Row                                     1.129
    Module type                             (FORM)
    Module Name                             RLDEL_CHECK
    ce Code Extract
      SourceCde
    9
    0 *------ ... Funktionsbausteine ermitteln -
    1   CALL FUNCTION 'BDT_TBZ1F_GET'
    2     EXPORTING
    3       iv_objcn  = gc_objcn_bupa
    4       iv_objap  = gc_objap_bupa
    5     TABLES
    6       et_tbz1f  = lt_tbz1f
    7     EXCEPTIONS
    8       not_found = 1
    9       OTHERS    = 2.
    0   READ TABLE lt_tbz1f INDEX 1.
    1   IF sy-subrc = 0.
    2     CALL FUNCTION 'BUP_PARTNER_GET'
    3       EXPORTING
    4         i_partner    = is_but100-partner
    5         i_cp_exclude = gc_x
    i_is_exclude = gc_x
    PORTING
    e_but000_int = ls_but000_int
    CEPTIONS
    OTHERS       = 1.
    ... Funktionsbausteine aufrufen -
    T lt_tbz1f WHERE     ztpkt =  'RLDEL'
                 AND NOT fname IS INITIAL.
    Datümer alt = neu = SPACE => Löschung, sonst Update -
    (Einschränkung der Gültigkeit)
    FUNCTION lt_tbz1f-fname
    PORTING
    i_partner        = is_but100-partner
    i_partnerguid    = ls_but000_int-partner_guid
    i_role           = is_but100-rltyp
    i_dfval          = is_but100-dfval
    i_calltp         = iv_calltp
    i_valid_from     = is_but100-valid_from_dats
    i_valid_from_old = iv_valid_from_old
    i_valid_to       = is_but100-valid_to_dats
    i_valid_to_old   = iv_valid_to_old
    PORTING
    e_result         = lv_result.
    ... Ergebnis merken, wenn höher als bisheriges Zwischenergebnis-
    v_result > gv_wu_result.                          "#EC PORTABLE
    wuresult = lv_result.
    F.
    ... Ergebnis ist 'Nicht löschen': Zeitpunkt abbrechen -

    HI Mallik,
    for termination action the operation that i've set is
    lis9  0001
    cop  0002
    lis9  0007
    cop  0008
    lis9  0014
    lis9  0015
    lis9  0587
    so just want to know if the set format for termination action is right
    and other option is that if there is some change to settings of infotype charateristics in table v_t582A this may cause change in the date that is cause of error.
    can u please suggest the above alignment of operations and infotype is right and provide me the idle settings for infotype characteristics which may solve my query.
    thanks mallik.

Maybe you are looking for