Depuis la version IOS 7.1.1 je ne peux plus recevoir mes mails

Bonjour.
DEPUIS la mise à jour je ne PEUX en plus de recevoir mes mails. du mon de Fournisseurs d'Accès J'ai et al Depasse près d'Une heure à refaire les reglages MAIS rien N'y non devant le fait. J'ai contacte le Soutien d 'd'd'Apple MAIS l'après Avoir refait TOUTES les Mêmes manipulations rien N'y fel. J'ai contacte Microsoft et EUX m'ont répondu Que ça venait de la nouvelle version de. Que DOI je faire? Attendre non changeur nouveau Correctif de ous de smartphone? ça de voiture commencent à me gaver sérieusement CE genre de Problème.
Cordialement.

Bonjour,
This is asked many times, but Apple has never supported reverting back to an older version of iOS after an upgrade.  The files for the older version are removed from the server when a new version is released.
Désolé

Similar Messages

  • Depuis que j'ai enregisté la Cs6 je ne peux plus utilisé le bridge 64 bits

    je me suis procuré la suite Cs6 version étudiant. J'ai rencontré des difficultés pour obtenir mon numéro d'installation. En attendant de l'obtenir j'ai unstallé la Cs6 sur mon ordinateur et je l'ai utilisée pendant la période de 30 jours. cette période a expiré. j'ai obtenu finalement mon numéro est j'ai donc validé mon enregistrement. Sauf que depuis je ne peux plus utiliser le bridge 64 bits. j'aimerai savoir pourquoi et comment résoudre cet incident.

    I see. In that case you may need to eradicate the SLStore folder so new activation data is produced and Bridge recognizes it. Refer to this:
    Error "Licensing has stopped working"
    Mylenium

  • Depuis que j'ai inslallé ios 7 je ne peux plus envoyer de mail

    Depuis que j'ai installé le IOS 7 je n'arrive plus à envoter de messages courriels, je reçois mais ne paux pas en envoyer,

    I see. In that case you may need to eradicate the SLStore folder so new activation data is produced and Bridge recognizes it. Refer to this:
    Error "Licensing has stopped working"
    Mylenium

  • Après téléchargement de la nouvelle version d'ITunes, je ne peux plus synchroniser mon téléphone sur mon Mac 10.5.8

    Après téléchargement de la nouvelle version IOS7 pour mon IPhone, je ne peux plus synchroniser mon IPhone 4S avec ITunes.
    La nouvelle version d'ITunes n'est pas disponible pour mon Mac OS X 10.5.8.
    Je suis bloquée, comment dois-je faire pour pouvoir, de nouveau, synchroniser ITunes et mon IPhone ?

    Depuis que j'ai installé le version 6.1.2, je bouffe 30 à 40% de batterie dans la nuit alors qu'avant mon iphone 5 consommait 1% la nuit.
    Je ne sais pas si on peut revenir en arrière. J'espère qu'il va y avoir une solution.

  • Depuis la derniere mise a jour de itunes je ne peux plus lancer l'application. J'ai un message d'erreur " impossible de démarrer le programme car il manque MSVCR80 sur votre ordinateur" ainsi que le message "error 7 windows 126" Merci de votre aide

    Bonjour depuis la derniere mise à jour d'itunes je ne peux plus lancer l'application
    J'ai plusieurs messages d'erreur " Itunes was not installed correctly error 7 windows 126"
    Je suis sous windows 7.
    Merci de votre aide

    See TS5376: iTunes 11.1.4 pour Windows : installation ou ouverture impossible and Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Depuis le passage à la version IOS 7 je ne parviens plus à envoyer ou recevoir mes courriels

    Bonjour;
    Comme dit le titre DEPUIS le passage à la nouvelle version of je n e r à ma boite hotmail Verser Envoyer Les mes ous-recevoir Courriels (d'Ailleurs Mon adresse email a disparu) Si vous Connaissez la nouvelle configuration AFIN de Pouvoir-recevoir mes Courriels Comme version ancienne Avec l', Je vous en Serais reconnaissant. Sinon, commenter Revenir à l'ancienne version?
    Cordialement.

    Bonjour,
    This is asked many times, but Apple has never supported reverting back to an older version of iOS after an upgrade.  The files for the older version are removed from the server when a new version is released.
    Désolé

  • Depuis ios 7 je ne peux plus debloquer mon ecran

    bonjour
    depuis que j'ai installé ios 7, mon iphone 4 ne reconnais plus mon code pour deverouiller l'ecran tactile. Un pro peut-il m'aider??
    merci

    Bonjour,
    This is asked many times, but Apple has never supported reverting back to an older version of iOS after an upgrade.  The files for the older version are removed from the server when a new version is released.
    Désolé

  • Can u please tell me how can i update my old version ios 6 is it possible????

    can u please tell me how can i update my old version ios 6.1.4  is it possible???? plz help me i update ios 8.1.3 but it is toooo slow and some times hang my iphone 5 please suggest how can i speedup my phone:(

    This Apple support article should help you.
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support

  • Why can't I restore the same version IOS that's on my phone?

    My iPhone 4s has apps on it that are not iOS 6x or even 7x compatible. iTunes/Apple won't let me restore the same version of iOS 5 that is currently on my phone that won't boot up. I have no options anymore except to pay.
    1. I can pay a developer to migrate the app I use for work to iOS7 and eventually run into the same problem later and pay AGAIN.
    2. I can ditch Apple (because there is no logical reason for this) and pay to go over to a Google phone and pay to migrate my app over to android but have the peace of mind that I won't be forced to do what android wants me to do anymore.
    I bought an iPhone, an iPhone 3G, an iPhone 3GS and an iPhone 4S. I don't like using the latest and greatest because I only really care about doing what *I* want to do with *MY* phone. I don't like being told I can't have what I've been using for the past 2 years because Apple has changed a policy or something.
    Is Apple doing ANYTHING for people like me or are we just screwed? Can anyone explain why Apple would disallow reinstallation of an iOS i've been using for years now?

    if you're saying the default function of 'restore' has always been update to latest for your device you'd all be correct.. but that's not what i'm talking about. shift+click restore and you'll be prompted to browse for your firmware. since the dawn of the iphone (ask anyone that's actually used this feature) you have always been able to use this feature to install same-version ios as to what version is on the device. in the past it was more open, allowing you to update to any version above the one you're on, but that was taken away back in IOS3.. for example.
    i'm sure for the average user who has no idea what version ios they use or want this would be completely transparent so i don't really blame you for not knowing or using this feature. for others like me this is a big deal. hopefully someone else who is on the same page as i am will chime in..
    i think it's a little crazy to force your users to only use the specific version ios you want them to. have you tried ios7 on an ipad2? hello lag. there are more reasons than mine to want to be able to control what software runs on YOUR hardware.. think about it.

  • I updated my Iphone 3gs to last version of iOS and now I can't change my configurations of Mail, Contacts, Calendars.

    I updated my Iphone 3gs to last version of iOS and now I can't change my configurations of Mail, Contacts, Calendars.

    Generally that is a sign that the iPhone had previously been jailbroken
    or hacked to work with other than the original wireless provider. The update
    has relocked the iPhone to the original wireless provider. You must
    contact them to see if they provide unlocking and if you qualify.
    If you can get that far, what does it say when you look at
    Settings=>General=>About=>Carrier?

  • I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

    I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

    Welcome to the Apple Community.
    Your phone doesn't do mirroring, only the 4S will do that. It only does basic AirPlay.
    Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).

  • I want to return to older version, iOS 5.1, but it doesn't let me!

    I want to return to older version, iOS 5.1, on ipad but it doesn't let me!

    You cannot downgrade the iOS on any iDevice. There is not way to install iOS 5 again.

  • How can I see what version IOS I have on IMac

    I'm new to Apple I have an IMAC and not sure where to see what version IOS I have.

    1. Choose About this Mac from the Apple menu.
    2. Macs run Mac OS X, not iOS.
    (124425)

  • Failed to upgrade new version iOS 7.0.4

    Failed to upgrade version iOS 7.0.4

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps..

  • HT4623 Went thro upgrading process for my mini ipad from version iOS 6 to iOS 7.At the end came to Terms & Condition section which prompted options "Agree" or "Disagree" at the bottom but on touching "Agree" there is no response at all & the ipad is unres

    Tried to upgrade my mini iPad from its  original iOS 6 version to iOS 7. All nearly completed but I can't get past the "iCloud Terms & Conditions" & "Privacy Policy" page as prompting to "Agree" or even "Disagree" at the bottom of the page does not let the iPad progress (or even backtrack) to any other display!
    I can actually see the GHOST PAGE titled "Find My iPad in iOS 7" concealed partially below the "Terms & Conditions" page.
    Since touch-prompting "Agree" on "Tems & Conditions" page failed to get any response,I also tried prompting "Disagree" in the hope that the upgrading would cancel or withdraw so as to go back to a perfectly working order version iOS 6 as before but unfortunately NOTHING AT ALL is happening & the iPad has become totally unresponsive.  Can anyone please guide me as to how to Restore my iPad to its working state as before?

    Try reset iPad and continue with update.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

Maybe you are looking for

  • Update a single column of a table

    Hi Champs, I want to update a single column of table PA0000. Following is ABAp code I am using: UPDATE pa0000 SET massn = wa_upd_actn71-massn                    WHERE pernr = wa_upd_actn71-pernr AND                           massn = c_crct_entry. whe

  • Adding field in the standard report

    Hi , i have added the one field in the standard transaction VL06 , in the outboud deliveries report according to the Note 605460. I have to add the field in LIPOV structure. after adding that field(include structure), in output i am not getting that

  • I cannot open iannotate pdf in ios 7... it close when open it with ios 7 ... i have purchased updated app 2.7

    urgent !!!!!!!!!!!

  • User settings for Default plant in some transactions

    Hi gurus, is it possible to get a default plant in any transaction that you enter ... e.x In any Tcode or  tcode MD04, i want my relevant plant ,ie ABCD to appear by default always.Whta would be the user settings I need to do Thnx in ADVANCE HKR

  • Why won't Network load?

    When I click on the Network icon within System Preferences it just keeps telling me that it is uploading, but never does.  I don't have any recent backups, and would not know how to just reload (correct word?) just the Network icon anyway.  I do have