Der IMAP-Server akzeptiert das Kennwort des Benutzers nicht. Geben Sie Ihr Kennwort erneut ein
Es läuft wochenlang alles sehr gut und dann passiert es immer wieder, dass In MAIL plötzlich 20mal oder mehr und immer wieder über den Tag verteilt folgende Meldung erscheint:
Der IMAP-Server akzeptiert das Kennwort des Benutzers nicht. Geben Sie Ihr Kennwort erneut ein
Ebenso erscheint bei einer anderen email:
Der POP-Server akzeptiert das Kennwort des Benutzers nicht. Geben Sie Ihr Kennwort erneut ein
Es handelt sich um 2 verschiedene email-Provider.
Das legt meiner Meinung nach den Schluss nahe, dass das Problem beim Programm MAIL oder beim Schlüsselbund liegt. Schlüsselbund habe ich gelöscht, das Passwort neu eingegeben. Zugriffsrechte habe ich repariert. Das Problem bleibt.
Wer weiß Abhilfe für das nervige Problem?
Du hast einfach mal den Zug verpaßt. Special Promotions/ Grace Period Upgrades sind imemr and bestimmte Fristen gebunden. Das hättest du schon damals alles bis spätestens Ende August klarmachen müssen. Jetzt kann da keiner mehr was für dich tun.
Mylenium
Similar Messages
-
Hinzufügen von Unterordnern in AppleMail wird blockiert durch die Meldung: Der IMAP Befehl "create" ist mit der Fehlermeldung "quota exceeded (Number of mailboxes exceeded)" vom Server fehlgeschlagen
-
Habe mir die kostenlose InDesign CS2 Version downgeloadet. Nun auch schon nach dem 2.mal nach der Installation funktioniert InDesign in einem bestimmten Punkt nicht. Innerhalb des Programms kann ich mit 'Enter' keinen Absatz erstellen. Er löscht mir immer
Es gibt keine kostenlose CS2-Version. Das ist eine Version für Leute, die eine CS2-Lizenz haben und die noch nutzen wollen, während Adobe's Lizenzierungsserver für CS2 schon lange abgeschaltet sind. Benutzung ohne Lizenz wäre also illegal.
Dann ist der letzte Satz nicht beendet. Was löscht "er" (?) immer? -
Ihr bringt zwar immer Updates, und dass egal für welches Gerät und wie alt es ist, doch auf dauer sollte man sich fragen, ob es sich überhaupt noch lohnt, wenn das jeweilige Software Update nichts mehr bringt außer einer instabilität des Systems, automatisches schließen von vorinstallierten Apps und lags InApp. Also z.B. ist es so dass bei mir mein iPod touch 5g nicht mehr wirklich flüßig läuft mit der iOS-Version 8.1.3. Das kann man auch von einem Gerät was schon seit ein paar Jahren draußen ist nicht mehr erwarten, mit Updates von dem jetztigen Stand. Mal sehen wie lange ihr die Updates für jedes alte Gerät weiter betreibt Apple. Bis es etwa gar nicht mehr läuft? Es ist zwar gut gemeint doch technisch geht dieses Verfahren nicht auf!
Ich habe das gleiche problem....ich hoffe auf eine schnelle loesung...
-
Die Nachricht konnte nicht übermittelt werden, weil das Postfach des Empfängers voll ist
Hallo liebe Communitie,
ich habe ein Problem ich kann keine Mails in meiner Icloud empfangen.
Ich bekomme immer wieder die Fehlermeldung.
Die Nachricht konnte nicht übermittelt werden, weil das Postfach des Empfängers voll ist.
<nk11p03mm-mail03532a.mac.com (ims-ms-daemon) #4.2.2>
Ich habe schon alle Mails in der Icloud gelöscht. Die Meldung kommt nach wie vor.
Was mache ich falsch.
Kann mir jemand helfen.
Danke schon mal im vorraus.Hallo liebe Communitie,
ich habe ein Problem ich kann keine Mails in meiner Icloud empfangen.
Ich bekomme immer wieder die Fehlermeldung.
Die Nachricht konnte nicht übermittelt werden, weil das Postfach des Empfängers voll ist.
<nk11p03mm-mail03532a.mac.com (ims-ms-daemon) #4.2.2>
Ich habe schon alle Mails in der Icloud gelöscht. Die Meldung kommt nach wie vor.
Was mache ich falsch.
Kann mir jemand helfen.
Danke schon mal im vorraus. -
Nach einem Jahr kontinuierlichem und fehlerfreiem wirft dieTime Maschine seit letztem Wochenende die folgende Fehlermeldung:
"Das Image des Backup-Volumes „/Volumes/Data/Volkers MacBook Air.sparsebundle“ wird bereits verwendet."
Ich nutze die Time Maschine mit einer lokalen Time Capsule (2GB) und nehme das AirBook immer wieder mit auf meine Außerneinsätze. Das war lange Zeit kein problem, aber ohne dass etwas an der Time Maschine oder dem Airbook geändert wurde, tauchten diese Meldungen auf.
Weiß jemand Rat ?
Danke und Gruß,
Obelix0708Welcome to the Apple Support Communities
First, restart your MacBook Air and your Time Capsule. This solves that problem in most of the cases.
If it doesn't work, see > http://pondini.org/TM/C12.html
Zunächst starten Sie Ihr MacBook Air und Time Capsule. Dies löst das Problem in den meisten Fällen.
Wenn es nicht funktioniert, siehe > http://pondini.org/TM/C12.html -
Cannot send email ("IMAP" server?)
I got an iPhone 5c last week. Verizon set up my email accounts. I receive everything to my two cox.net mailboxes just fine on my new phone.
Whenever I attempt to send an email I get the following error message:
Cannot Send Mail - the user name or password for SMTP:(my email)@smtp.cox.net is incorrect.
Under "settings", it says the server is "IMAP." Just IMAP. No option to change or edit servers appears to exist, either.
Now, on my iPad, my incoming mail server is "pop.cox.net" and my outgoing server is smtp.cox.net. No issues there. Always has been - and thought it was on my phone, too.
I have deleted all of my mail accounts several times, and re-added them, only to have this "IMAP" server on my mail accounts, and appears to be what is preventing me from sending mail.A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273 -
Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi
Thursday 4:20am EST, 02-19-2015
Hi, My connection to the AOL IMAP server has suddenly failed - Says "Not Connected" on Accounts page
I haven't changed anything and this just started failing this morning.
I've saw same issue on my Blackberry PlayBook 64GB.
Is anyone else recently experiencing AOL IMAP Errors?
Solved!
Go to Solution.Yes! Same thing happened suddenly to my Z10 this morning. No AOL.
-
I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELPHi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support -
No access to IMAP server in Mail after installing Yosemite.
Installed Yosemite on my I-mac and now cannot access email on SMTP IMAP server. Keep getting error messages. Black triangles with an exclamation mark appear beside account name in the mailbox. Spent 2 hrs. on the phone with my Internet Service Provider and got it to work, but as soon as I was off the phone it reverted back to same problem. Is there a mail problem in Yosemite?
try this - worked for me. read in another thread...
For those of you having email password issues, I'd suggest:
1) Close your mail client (i.e. Apple Mail, Thunderbird, Outlook, etc).
2) Launch "Applications" > "Utilities" > "Keychain Access.app"
3) Select "login" from the sidebar top left area, then select "Passwords" in lower left area
4) Click into the Search box in the upper right and search for your ISPs server names. For example, type "aol" or "google" or "comcast", etc.
5) Look through the search results for password entries related to your SMTP (outgoing) or IMAP/POP (incoming) mail servers. Select them and delete them.
6) Open your email client and try to receive mail, and then to send mail. You should be prompted to enter your mail username and/or password.
Hopefully this might fix issues for those of you using mail clients that use Keychain for credential storage. -
IPad not using Sent, Trash folders of IMAP server
The iPad 1 is running iOS 5.1.1. I have created an IMAP mail account and in Mailbox Behaviors have mapped Drafts on the iPad to Entwürfe on the server, Sent on the iPad to Gesendete Objekte on the server, and Deleted on the iPad to Papierkorb on the server. When I send mail from this account it does not appear in Sent. Using a Web mail client I can verify that it does not appear in Gesendete Objekte either. I have the same problem when I delete mail from this account on the iPad: the mail does not appear in Trash (on the iPad) or Papierkorb (on the server).
I have setup the account on an iPhone 4S, and the same problems occur there. On an MacBook Pro running OS X 10.7.4 I have also setup an IMAP account for the same server and have performed tha same mapping of the Mail folders to the server's. There, everything works as expected. When I send a mail from that account on the Mac, it appears in Sent, Gesendete Objekte and in Sent on the iPad and iPhone. Similarly, when a mail is deleted from the account on the Mac, it appears in Trash, Papierkorb, and Trash on the two iOS devices.
Does anybody have a solution to this problem? It's almost as if there's option missing in iOS 5 to "save on server"; they're there in Mail on the Mac.
Regards,
RichardOK, I have found the problem. One of the mail accounts, for vtx.ch (formerly tiscali.ch), was configured to get mail from vtx's POP server, but to send it from my domain's SMTP server. For some reason, mail that was sent from my domain's mail server was being put in the local Sent folder of the vtx account. The same was true of Trash, Junk, and Drafts. I was able to fix this by deleting the vtx POP account and creating an IMAP account instead. I could map the folders of the vtx IMAP server to the right ones on the iPad and specify my domain's SMTP server for outgoing mail. Everything now works as expected. In particular, if I forward a mail from the vtx Inbox, it is sent using my domain's SMTP server, but appears in the Sent folder of the vtx account, while doing the same thing with a mail in the Inbox of the account corresponding to my domain's email server causes the mail to appear in its Sent folder.
I suspect this is a bug due to an oversight on Apple's part, as usually every email service has its own servers. The vtx SMTP server doesn't allow me to send mail from outside the vtx domain, i.e., I can only send mail from its Webmail interface using vtx's SMTP server. That's why I have to use another SMTP server to send from outside vtx.
Regards,
Richard -
Multiple clients with same account on a single IMAP server
Hi,
I am connecting to a IMAP server using same account but from 2 different machines. From one machine a mark a message as SEEN=FALSE. But on the second machine, the flag will still be TRUE.
Is there any way to co-ordinate between multiple clients so that all the clients are in sync.
Regards,
Nitin.I was able to resolve the problem using addMessageCountListener and messagesAdded method, as suggested by you.
I am now facing another problem. Whenever a new message is received, code inside messagesAdded method gets executed. Here I am trying to spawn another thread and do some stuff. But this new thread is not starting at all. It goes into some JavaMail:EventQueue and does nothing. What is the concept of EventQueue here? How can I get this new thread executed?
Also will there be synchronization problems in messagesAdded method. Say I received a message and I am processing it in the messagesAdded method. In the mean time another message comes up. How will this behave. -
I keep getting a message "The MobileMe IMAP server ... rejected the password for ...." I can use that password when I go to iCloud (and to this discussion), but my e-mails won't download to my computer. What's the mix-up?
If the setting is greyed out perhaps you have restrictions enabled that would prevent someone from changing accounts. Settings>General>Restrictions>Allow Changes>Accounts.
-
Hi all,
A few days ago, I moved 3 sub-folders within my Archive folder. I was doing those modifications using Thunderbird.
My Archive folder used to contain the following sub-folders:
Archive
/A2014
/B2014
/C2014
I tried to move the folders A2014, B2014 and C2014 under the sub-folder LastYear, and created new A, B and C folders for 2015, so that it would be something like:
Archive
/LastYear
/A2014
/B2014
/C2014
/A2015
/B2015
/C2015
On the webmail interface, everything looks fine: the old A, B and C folders where moved into the Archives/LastYear folder, and the new A, B and C folders appear under Archives. However, on Thunderbird things are a bit more... strange.
Case 1: For some folders, things are as they should be.
Folders A2014 and B2014 were correctly moved into Archives/LastYear.
Folders A2015 and C2015 were correctly created in Archives.
Case 2: One folder does not appear at all - anymore.
Folder B2015 does not appear anywhere - despite being visible on the webmail interface. It does not appear in the list of folders to synchronize. No .msf file appear. Nothing happens if I try creating it again.
Note that it briefly existed after I created it, but stopped appearing a few hours later.
Case 3: One folder appears in the wrong location and cannot be accessed.
Folder C2014 appears in the old location (Archives) and not were it should be (and is on the webmail interface), that is Archives/LastYear. I cannot perform any operation on it in Thunderbird, I systematically get the following error message:
"The current operation on 'C2014' did not succeed. The mail server for account <AccountName> responded: "Archives/C2014" doesn't exist."
(Which is correct because according to the server the folder C2014 is in Archives/LastYear).
The C2014.msf file is also wrongly located, but moving it to the correct location did not change anything: the next time Thunderbird was started, the wrongly located .msf file was re-created.
Thunderbird does not show the emails contained in this folder - when I try loading them I get the previous error message.
Using the same style than before, here is how my Archives folder look right now:
Archive
/LastYear
/A2014
/B2014
/A2015
/C2015
/C2014
I am totally flabbergasted, I have no idea of where the problem is. I tried various fixes found on forums (such as playing around with the .msf files), but no luck so far. Any idea?
A few more details:
- I use an IMAP server.
- This is a professional address, and I have little control on it.
- I use Thunderbird with this account on two different computer, the problem is identical on both computers.
- I tried removing/re-installing the account from Thunderbird, it did not change anything.
I would be eternally grateful if any of you could come up with a solution!
Many many thanks,
AgnesI know my files downloaded through Firefox won't appear in my downloads folder because that is just supported by Safari
No, I think that Apple just assigned the Downloads folder to Safari to send things there by default. You can do the same with Firefox, just go to the Firefox Preferences, click on main, tick the "Save files to..." and click the Choose button, then navigate to /Users/yourname/Downloads and click choose. I have always had all my Internet applications download things to a Downloads folder I keep at the root level of the drive (so all users can access them), but I just changed the Firefox pref to the new Apple Downloads folder and it worked fine.
Francine
Francine
Schwieder -
Since I updated my iPhone 4S to iOS 8.1.2 last night, I can no longer connect to my imaps server. Other clients can connect to the server. Rebooting the device is no help. Before the update (i.e. 8.1.1), it was working fine. Is this a known issue?
No, it is not a known issue. It is a known non-issue. Try resetting your IMAP login ID and password. Both the incoming and outgoing. If that fails delete the account reboot the phone, and add it back.
Maybe you are looking for
-
Incompatibility between DW on different computer browsers
I'm a graphic designer / dabble a bit in DW / beginner coding skillset In essence: 1) I'm working on a five button menu in a style that's commonly known as a "Mac (MacIntosh) Docker / Fisheye" effect. 2) On one computer it works fine in the IE browse
-
Pages loses text in Word import
I'm importing a word document, and Pages is leaving out text that TextEdit does not. Specifically the following data: HYPERLINK \l "_Toc190168203" Application Configuration Settings PAGEREF _Toc190168203 \h 33 HYPERLINK \l "_Toc190168204" Application
-
I have created a repgroup CAROLINE and I get an error when I try to add a master site to it.The master definition site is on v 8.1.7.0.0.(tammy sid) and the master site (pony sid) on v 8.0.6.3.0. The error I get is : ORA-06550: line 1, column 7: PLS-
-
Implement Maps keyed by a Persistent Class
Hi, You would probably agree that JDO Maps keyed by a primitive/primitive wrapper are not nearly as usefull as the ones mapped by a PC. I wonder if it is in your plans to provide this functionality? Kodo 2.4? or 2.5 If I am not mistaken somebody (may
-
Approval Request assigned to DELETED User
Hi All, I have created an approval process with type "User" and "APPROVER" as user and then I have deleted this user in OIM. But still the approval request is getting assigned to this user "APPROVER". Is there way to assign this request to "SYSTEM AD