Derby Server for WLS

Hi,
When ever i start an OSB server, along with OSB server comingup, why does a "Derby server for WLS example server" starts at port 1527?
This is confusing me....! I havent initiated Derver server, then why does it starts....?
Thanks
Kane
Edited by: 919083 on May 20, 2012 8:25 AM

Hi,
Derby server is used for storing OSB Reports. you can stop it by unselecting evaluation database while deployment of OSB Server.
find following link.
http://osbtutorial.blogspot.sg/
Abhishek

Similar Messages

JDeveloper 12c "Derby Server for WLS Examples Server" prompt

Hello,
I've been playing around with the new JDeveloper 12c, and I've noticed that every time I start up the integrated weblogic 12c server (on Windows), this "Derby Server for WLS Example Server" command prompt opens.
Is there any way to stop this from happening? or is it a required component?
Thanks,
Evan Gilbert

At the moment it's a needed component. There was a discussion if there is a way to disable this, but from what I remember you currently have to have a full DB (for production) or the derby server for the embedded wls to run.
Timo

Authentication problem by external ldap server for WLS 7.0

Hi all,
I have configured iPlanet directory Server to serve as authentication security
provider for WLS 7.0.While doing so I have created a Test security realm and made
it as default.I have also configured the other default settings for the remaining
security providers for the realm.
Now, while I start the WLS with the default username and password, boot-error
comes as given below. As a matter of fact I have also created groups with relevant
username and pwd in the ldap server as specified bu the Bea documentation.
I have tried to remove the problem since last 4 days but all in fiasco.
If anybody has any pointer to the problem - it will be a great help.
The error :
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea\weblogic700\samples\server\config\petstore>"D:\bea\jdk131_03\bin\java"
-h
otspot -Xms32m -Xmx200m -Dpet.mode= - Dweblogic.management.discover=false -Dweblo
gic.Name=petstoreServer -Dbea.home="D:\bea" -Dweblogic.management.username=weblo
gic -Dweblogic.management.password=weblogic -Dweblogic.ProductionModeEnabled=tru
e -Djava.security.manager -Djava.security.policy=="D:\bea\weblogic700\server\lib
\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Nov 19, 2002 10:08:04 AM IST> <Notice> <Management> <140005> <Loading configura
tion D:\bea\weblogic700\samples\server\config\petstore\.\config.xml>
<Nov 19, 2002 10:08:21 AM IST> <Notice> <Security> <090082> <Security initializi
ng using realm RitTestRealm.>
<Nov 19, 2002 10:08:22 AM IST> <Critical> <WebLogicServer> <000364> <Server fail
ed during initialization. Exception:java.lang.SecurityException: User weblogic
i
s not permitted to boot the server
java.lang.SecurityException: User weblogic is not permitted to boot the server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
Regards,
Ritwik

Thanks Vijay - it has worked by creating the Administrator group in LDAP but Weblogic
documentation also states the creation of any group in Ldap server with the boot
username and pwd and then adding the group in the admin role of WLS7.0 - but this
did not work.
If there is any info regarding the same - pl. do let me know
Regards,
Ritwik
"Vijay" <[email protected]> wrote:
>
Ritwik,
I think WebLogic 7 requires a group called "Administrators" in the LDAP
server
and requires an user to be added to that group. I have this working in
one of
my projects. The group really doesnt need to be an LDAP administrative
group.
Can you provide any additional information. I might be able to help since
I got
this working only a coupla days back.
Vijay
"Ritwik Batabyal" <[email protected]> wrote:
Hi all,
I have configured iPlanet directory Server to serve as authentication
security
provider for WLS 7.0.While doing so I have created a Test security realm
and made
it as default.I have also configured the other default settings forthe
remaining
security providers for the realm.
Now, while I start the WLS with the default username and password, boot-error
comes as given below. As a matter of fact I have also created groups
with relevant
username and pwd in the ldap server as specified bu the Bea documentation.
I have tried to remove the problem since last 4 days but all in fiasco.
If anybody has any pointer to the problem - it will be a great help.
The error :
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea\weblogic700\samples\server\config\petstore>"D:\bea\jdk131_03\bin\java"
-h
otspot -Xms32m -Xmx200m -Dpet.mode= - Dweblogic.management.discover=false
-Dweblo
gic.Name=petstoreServer -Dbea.home="D:\bea" -Dweblogic.management.username=weblo
gic -Dweblogic.management.password=weblogic -Dweblogic.ProductionModeEnabled=tru
e -Djava.security.manager -Djava.security.policy=="D:\bea\weblogic700\server\lib
\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Nov 19, 2002 10:08:04 AM IST> <Notice> <Management> <140005> <Loading
configura
tion D:\bea\weblogic700\samples\server\config\petstore\.\config.xml>
<Nov 19, 2002 10:08:21 AM IST> <Notice> <Security> <090082> <Security
initializi
ng using realm RitTestRealm.>
<Nov 19, 2002 10:08:22 AM IST> <Critical> <WebLogicServer> <000364><Server
fail
ed during initialization. Exception:java.lang.SecurityException: User
weblogic
i
s not permitted to boot the server
java.lang.SecurityException: User weblogic is not permitted to bootthe
server
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:1076)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>
Regards,
Ritwik

Service pack 3 for wls platform or server 8.1 ?

Hello Folks,
Might anyone know when server platform 8.1 service pack 3 is due for release ?
Or is it out already ? I see the release notes are available!
I'm logging in with valid support id, still see sp2 for download.
thanks!
DM

Does anyone know why I can not pass the login page (using my registered
name) before opening the downlaod page ?
"giuseppe" <[email protected]> wrote in message
news:[email protected]..
http://e-docs.bea.com/wls/docs61/install/instsp.html#1074972
giuseppe
"kevin" <[email protected]> wrote in message
news:[email protected]..
Hi,
I was trying to download service pack 3 for WLS 6.1 but could not find
the
place.
Do I need to purchase the support in order to download the service pack?
I
registered online already as a normal user.
Where is the link if anyone can get free download for the service pack 3
>>
Thanks in advance

Memory settings for WLS server

Hi
In my production server for weblogic the memory settings is set to
MEM_ARGS=-Xms64m -Xmx64m
I have a 4GB of RAM in my server,
If I increase the MEM_ARGS parm will it give a better performance.?
what will be a better number to go with instead of 64M
Please advise
Thanks
DN

Rob
Thanks for the answer ,
I dont have much applications running on this PC other than SQL server.
SQL server is configured to take a mximum of 2GB I believe.
You suggest to change the minimum and maximum to 512 right?
what does the initial part(-XX:MaxPermSize=128m ) of the following line means?
MEM_ARGS="-XX:MaxPermSize=128m -Xms512m -Xmx512m"
Thanks again
DN
Rob Woollen <[email protected]> wrote:
DN wrote:
Hi
In my production server for weblogic the memory settings is set to
MEM_ARGS=-Xms64m -Xmx64m
I have a 4GB of RAM in my server,
If I increase the MEM_ARGS parm will it give a better performance.?Most likely. Is anything else running on this machine? You have a lot
of free memory, and in general larger heaps do help minimize time spent
in garbage collection.
I'd suggest reading
http://edocs.bea.com/wljrockit/docs81/tuning/basic.html#999276
what will be a better number to go with instead of 64MI'd bump it up to 512MB and tune from there.
-- Rob
Please advise
Thanks
DN

Error while starting Managed server in wls

I am using WebLogic Server Version: 10.3.4.0. I have created one managed server thru admin console. I am starting managed server using startManagedWebLogic.cmd batch file. Chnages I made in this cmd file is added managed server name and wls userid/password.
When execute this, I get below error:
Server
Exception in thread "Main Thread" java.lang.NoClassDefFoundError: weblogic/Server
Caused by: java.lang.ClassNotFoundException: weblogic.Server
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: weblogic.Server. Program will exit.
The contents of the startManagedWebLogic.cmd is as below:
@ECHO OFF
@REM WARNING: This file is created by the Configuration Wizard.
@REM Any changes to this script may be lost when adding extensions to this configuration.
SETLOCAL
@REM --- Start Functions ---
GOTO :ENDFUNCTIONS
:usage
     echo Need to set SERVER_NAME and ADMIN_URL environment variables or specify
     echo them in command line:
     echo Usage: %1 SERVER_NAME {ADMIN_URL}
     echo for example:
     echo %1 managedserver1 http://localhost:7001
GOTO :EOF
:ENDFUNCTIONS
@REM --- End Functions ---
@REM *************************************************************************
@REM This script is used to start a managed WebLogic Server for the domain in
@REM the current working directory. This script can either read in the SERVER_NAME and
@REM ADMIN_URL as positional parameters or will read them from environment variables that are
@REM set before calling this script. If SERVER_NAME is not sent as a parameter or exists with a value
@REM as an environment variable the script will EXIT. If the ADMIN_URL value cannot be determined
@REM by reading a parameter or from the environment a default value will be used.
@REM
@REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@REM (http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm)
@REM *************************************************************************
@REM Set SERVER_NAME to the name of the server you wish to start up.
Set SERVER_NAME=*ManagedServer1*
set DOMAIN_NAME=mydomain
set ADMIN_URL=http://localhost:7001
@REM Set WLS_USER equal to your system username and WLS_PW equal
@REM to your system password for no username and password prompt
@REM during server startup. Both are required to bypass the startup
@REM prompt.
set WLS_USER=*weblogic*
set WLS_PW=*weblogic1*
@REM Set JAVA_OPTIONS to the java flags you want to pass to the vm. i.e.:
@REM set JAVA_OPTIONS=-Dweblogic.attribute=value -Djava.attribute=value
set JAVA_OPTIONS=-Dweblogic.security.SSL.trustedCAKeyStore="d:\Perforce\weblogic1\src_16020jr\bea\wlserver_10.3\server\..\server\lib\cacerts" %JAVA_OPTIONS%
@REM Set JAVA_VM to the java virtual machine you want to run. For instance:
@REM set JAVA_VM=-server
set JAVA_VM=
@REM Set SERVER_NAME and ADMIN_URL, they must by specified before starting
@REM a managed server, detailed information can be found at
@REM http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm
if "%1"=="" (
     if "%SERVER_NAME%"=="" (
          CALL :usage %0
          GOTO :EOF
) else (
     set SERVER_NAME=%1
     shift
if "%1"=="" (
     if "%ADMIN_URL%"=="" (
          CALL :usage %0
          GOTO :EOF
) else (
     set ADMIN_URL=%1
     shift
@REM Export the admin_url whether the user specified it OR it was sent on the command-line
set ADMIN_URL=%ADMIN_URL%
set SERVER_NAME=%SERVER_NAME%
set DOMAIN_HOME=D:\Perforce\weblogic1\dev\src_crmod\wls\mytest
if "%1"=="" (
     @REM Call Weblogic Server with our default params since the user did not specify any other ones
     call "%DOMAIN_HOME%\bin\startWebLogic.cmd" nodebug noderby noiterativedev notestconsole noLogErrorsToConsole
) else (
     @REM Call Weblogic Server with the params the user sent in INSTEAD of the defaults
     call "%DOMAIN_HOME%\bin\startWebLogic.cmd" %1 %2 %3 %4 %5 %6 %7 %8 %9
ENDLOCAL
Any help is really appreciated.

I could see calling to setDomainEnv.cmd script:
*@REM Call setDomainEnv here.*
set DOMAIN_HOME=D:\Perforce\weblogic1\dev\src_crmod\wls\mytest
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
set SAVE_CLASSPATH=%CLASSPATH%
But in my environment I do not see these variable set to any, JAVA_HOME, DERBY_CLASSPATH, JAVA_OPTIONS, CLASS_PATH.
This might be the issue? Or anything else?

Problems Starting Weblogic Server for Tutorials (Fresh install)...

Hi guys, need a little help here.
I'm trying to startup Weblogic Server for Java Control Tutorial application and I get all sorts of errors, mostly seeming to deal with JMS/JNDI network stuff. Here's the error dump I get:
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Starting WLS with line:
C:\bea\JDK142~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket
,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx256m -XX:Com
pileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m -Xverify:none -ea -da
:com.bea... -da:javelin... -da:weblogic... -Dplatform.home=C:\bea\WEBLOG~1 -Dwls
.home=C:\bea\WEBLOG~1\server -Dwli.home=C:\bea\WEBLOG~1\integration -Dlog4j.con
figuration=file:C:\bea\WEBLOG~1\common\lib\workshopLogCfg.xml -Dweblogic.managem
ent.discover=true -Dweblogic.ProductionModeEnabled= -Dweblogic.security.SSL.ign
oreHostnameVerify=false -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.log
ErrorsToConsole=true -Dweblogic.Name=cgServer -Djava.security.policy=C:\bea\WEBL
OG~1\server\lib\weblogic.policy weblogic.Server
<Oct 30, 2005 2:33:31 PM PST> <Info> <WebLogicServer> <BEA-000377> <Starting Web
Logic Server with Java HotSpot(TM) Client VM Version 1.4.2_05-b04 from Sun Micro
systems Inc.>
<Oct 30, 2005 2:33:31 PM PST> <Info> <Configuration Management> <BEA-150016> <Th
is server is being started as the administration server.>
<Oct 30, 2005 2:33:31 PM PST> <Info> <Management> <BEA-141107> <Version: WebLogi
c Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Integration 8.1 SP4 Tue Nov 30 10:34:16 PST 2004 471877>
<Oct 30, 2005 2:33:32 PM PST> <Notice> <Management> <BEA-140005> <Loading domain
configuration from configuration repository at C:\bea\WEBLOG~1\samples\domains\
workshop\.\config.xml.>
<Oct 30, 2005 2:33:33 PM PST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\bea\weblogic81\samples\domains\workshop\cgServer\cgServer.log is op
ened. All server side log events will be written to this file.>
<Oct 30, 2005 2:33:34 PM PST> <Notice> <Security> <BEA-090082> <Security initial
izing using security realm myrealm.>
<Oct 30, 2005 2:33:34 PM PST> <Notice> <WebLogicServer> <BEA-000327> <Starting W
ebLogic Admin Server "cgServer" for domain "workshop">
<Oct 30, 2005 2:33:38 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:40 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:42 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:44 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:46 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:47 PM PST> <Error> <JDBC> <BEA-001150> <Connection Pool "cgJM
SPool-nonXA" deployment failed with the following error: 0:Could not create pool
connection. The DBMS driver exception was: SQL-server rejected establishment of
SQL-connection. Pointbase Server may not be running on localhost at port 9093..
>
<Oct 30, 2005 2:33:48 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:50 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:52 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:54 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:56 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001150> <Connection Pool "cgPo
ol" deployment failed with the following error: 0:Could not create pool connecti
on. The DBMS driver exception was: SQL-server rejected establishment of SQL-conn
ection. Pointbase Server may not be running on localhost at port 9093..>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001151> <Data Source "cgDataSo
urce" deployment failed with the following error: DataSource(cgDataSource;cgSamp
leDataSource) can't be created with non-existent Pool (connection or multi) (cgP
ool).>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001151> <Data Source "cgDataSo
urce-nonXA" deployment failed with the following error: DataSource(cgDataSource-
nonXA;weblogic.jdbc.jts.ebusinessPool) can't be created with non-existent Pool (
connection or multi) (cgJMSPool-nonXA).>
<Oct 30, 2005 2:33:57 PM PST> <Alert> <JMS> <BEA-040052> <JMSServer "cgJMSServer
" store failed to open java.io.IOException: JMS JDBC store, connection pool = <c
gJMSPool-nonXA>, prefix = <weblogic>: connection pool does not exist.
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix
= <weblogic>: connection pool does not exist
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:48
8)
at weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
60)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
28)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(Rem
oteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBean
ServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanPro
xy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(
ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployment
s(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JMS> <BEA-040123> <Failed to start JMS Se
rver "cgJMSServer" due to weblogic.jms.common.JMSException: JMS can not open sto
re cgJMSStore.
weblogic.jms.common.JMSException: JMS can not open store cgJMSStore
at weblogic.jms.backend.BEStore.start(BEStore.java:163)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
60)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
28)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(Rem
oteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBean
ServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanPro
xy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(
ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployment
s(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
Caused by: java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-non
XA>, prefix = <weblogic>: connection pool does not exist
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:48
8)
at weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
... 29 more
>
<Oct 30, 2005 2:33:57 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090170> <Loading the priv
ate key stored under the alias DemoIdentity from the jks keystore file C:\bea\we
blogic81\server\lib\DemoIdentity.jks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090171> <Loading the iden
tity certificate stored under the alias DemoIdentity from the jks keystore file
C:\bea\weblogic81\server\lib\DemoIdentity.jks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090169> <Loading trusted
certificates from the jks keystore file C:\bea\weblogic81\server\lib\DemoTrust.j
ks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090169> <Loading trusted
certificates from the jks keystore file C:\bea\JDK142~1\jre\lib\security\cacerts
.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000331> <Started We
bLogic Admin Server "cgServer" for domain "workshop" running in Development Mode
>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000360> <Server sta
rted in RUNNING mode>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <WebLogicServer> <BEA-000372> <HostName:
0.0.0.0, maps to multiple IP addresses:192.168.0.1,70.34.104.139>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <WebLogicServer> <BEA-000372> <HostName:
0.0.0.0, maps to multiple IP addresses:192.168.0.1,70.34.104.139>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000355> <Thread "Li
stenThread.Default" listening on port 7001, ip address *.*>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000355> <Thread "SS
LListenThread.Default" listening on port 7002, ip address *.*>
<Oct 30, 2005 2:34:07 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 2 attempts. The MDB will attempt to
reconnect every 10 seconds. This log message will repeat every 600 seconds until
the condition clears.>
<Oct 30, 2005 2:34:07 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:34:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 2 attempts. The MDB will attempt to reconnect every
10 seconds. This log message will repeat every 600 seconds until the condition
clears.>
<Oct 30, 2005 2:34:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:44:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 62 attempts. The MDB will attempt to reconnect ever
y 10 seconds. This log message will repeat every 600 seconds until the condition
clears.>
<Oct 30, 2005 2:44:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:44:17 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 63 attempts. The MDB will attempt to
reconnect every 10 seconds. This log message will repeat every 600 seconds unti
l the condition clears.>
<Oct 30, 2005 2:44:17 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:54:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 122 attempts. The MDB will attempt to reconnect eve
ry 10 seconds. This log message will repeat every 600 seconds until the conditio
n clears.>
<Oct 30, 2005 2:54:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:54:17 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 123 attempts. The MDB will attempt t
o reconnect every 10 seconds. This log message will repeat every 600 seconds unt
il the condition clears.>
<Oct 30, 2005 2:54:17 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
THANK YOU for any help you can provide!

These are errors/warning because of incorrect connection pool settings.Either the database parameters were not configured correctly or there were some issues with the configuration itself.
Your server did start up correctly though.
"<Server started in RUNNING mode>"

Can i set a node manager serve for 2 domain on one machin??

My question is simple.
I installed webcenter suite and soa suite in a machine using difference linux user and difference middleware home.
and I want to set a node manager server for two domains (soa_domain and webcenter_domain).
Is is possible?
When I tried to register domain list in node manager domain list using nmEnroll() of wlst, it failed.
please check following logs in 7101 is admin server port of soa domain and I ran node manager on webcenter domain.
Thanks in advance.
BmW.
~~~~~~~~~~~~~~~~~~
wls:/offline> connect()
Please enter your username :weblogic
Please enter your password :
Please enter your server URL [t3://localhost:7001] :t3://localhost:7101
Connecting to t3://localhost:7101 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'soa_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> nmEnroll('/u02/app/soa11g/middleware/user_projects/domains/soa_domain', '/u02/app/wc11g/middleware/wlserver_10.3/common/nodemanager');
Enrolling this machine with the domain directory at /u02/app/soa11g/middleware/user_projects/domains/soa_domain ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 1447, in nmEnroll
File "<iostream>", line 1848, in raiseWLSTException
WLSTException: Error occured while performing nmEnroll : Problem enrolling the machine. : /u02/app/soa11g/middleware/user_projects/domains/soa_domain/config/nodemanager/nm_password.properties (Permission denied)
Use dumpStack() to view the full stacktrace
wls:/soa_domain/serverConfig> exit();

you might be victim of the "node manager starts WL Server with same Unix user id that was used to start Node Manager itself" problem
see here http://forums.oracle.com/forums/thread.jspa?threadID=2184607&tstart=89
I have been looking everywhere for a simple way to tell Node Manager to use a different Unix UID,
anybody any clue?
here http://download.oracle.com/docs/cd/E12840_01/wls/docs103/nodemgr/overview.html the Node Manager doc page

Setting apache as a front end host-proxy web server for weblogic 10.3.3

Hi ,
i have installed apache 2.2.21 in the red hat linux 6 environment.Now i am trying to set that apache web server as a front end host ,proxy web server for my weblogic 10.3 application server cluster. My apache is listening to the port 8080.
What changes i had to made in admin console of my server as well as in the httpd.conf file of apache.
Can any one guide me how to proceed ?
Any help is highly appreciated......

Thanks Ravi,
i have already gone through http://docs.oracle.com/cd/E12840_01/wls/docs103/plugins/apache.html.
In my case "mod_wl_22.so" was not available but i downloaded this p10051826_1033_Generic.zip file from where i got that file and make it available in the modules directory, changed the file permissions (using chmod 755 mod_wl_22.so) and also changed the httpd.conf file as below :
LoadModule weblogic_module modules/mod_wl_22.so
<IfModule mod_weblogic.c>
WebLogicCluster wlserv1:7001,wlserv2.com:7001
MatchExpression *.jsp
</IfModule>
By using /bin/ls command i checked the following :
/bin/ls: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.18, stripped
Using file mod_wl_22.so i checked the following:
mod_wl_22.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, not stripped
My problem is when i used ./apachectl -t i got the following error :
httpd: Syntax error on line 112 of /u40/app/apache/conf/httpd.conf:
Cannot load /u40/app/apache/modules/mod_wl_22.so into server: libstdc++.so.5:
cannot open shared object file: No such file or directory
So can u please guide me where my problem is and how to rectify it ? Its urgent. please help me.
Thanks
Jyoti Ranjan

Help about W2K Apache plug-in for WLS

Hi,everybody.
I want to use the W2K apache http server for redirect the dynamic request to
WLS. But i don't have the corresponding plug-in. Who can help me? or Who can
give me some hint about this?
Thanks in advance.
BR
Steven Zhao

Hi Steven,
as far as I know there is no Apache Plugin for Windows Platform. Your
choice is either Unix->Apache or Windows->IIS. I think there is a
Netscape Plugin as well, but I don't know for which platforms.
Daniel
-----Original Message-----
From: Steven Zhao [mailto:[email protected]]
Posted At: Friday, October 20, 2000 6:02 AM
Posted To: management
Conversation: Help about W2K Apache plug-in for WLS
Subject: Help about W2K Apache plug-in for WLS
Hi,everybody.
I want to use the W2K apache http server for redirect the dynamic
request to
WLS. But i don't have the corresponding plug-in. Who can help me? or Who
can
give me some hint about this?
Thanks in advance.
BR
Steven Zhao

(268625273) Q WSI-29 Can you give any performance benchmarks for WLS web services?

Q<WSI-29> Can you give any performance benchmarks for WLS web services?
A<WSI-29>: It is very difficult to quantify performance aspects of web services
since they depend on so many variables including but not limited to: backend system
processing by stateless session beans and message driven beans, size of XML SOAP
message sent, system hardware (CPU speed, parallel processing, RAM speed) and
system software (JVM type and version of WebLogic server). However, let me point
out that the EJB backend processing of requests both have the best possible scalability
within the EJB2.0 specification (both stateless session and message driven beans
can be pooled) and servlets have a proven scalable track record. Thus it should
be possible to scale your web service deployment to meet demand. The overhead
in processing XML within the servlet can be significant depending on the size
of XML data (either as a parameter or a return type). While WLS6.1 does not have
any features to address this performance concern, WLS7.0 will feature Serializer
and Deserializer classes which can be dedicated to the XML to Java and Java to
XML translation (they can also be automatically be generated from a DTD, XML Schema
or regular JavaBean).
It is true that web services are not the fastest way to process client requests
but BEA is committed to making WebLogic server the fastest possible service provider.
Adam

see http://www.oracle.com/support/products/oas/sparc30/html/ows08811.html

Third party benchmarks for WLS

Does anyone have a reference for third party benchmarks for
WLS 5.1 or 6.0 vs other J2EE app servers?
Also performance of built-in WLS web server vs Apache or NES?
Thanks,
Eric Chiu

ed2345 wrote:
Easily done. See iTunes: How to set the play order of songs on an MP3 CD. Basically, if you sort the playlist by album, iTunes will burn the MP3 CD with album folders.
Thanks, that solves the second problem, which was the more pressing anyway.
Do you maybe also have an idea how to get rid of the number in front of the album title in the directory name?
Cheers, Robert

How to upgrade the Admin Server to WLS 9.2.3 while Managed on 9.2.2

HI,
I have a WLS 9.2.2 domain with Admin and 2 Managed instances clustered. Admin and Managed Servers are on different machines.
I want to upgrade only the Admin Server to WLS 9.2 MP3 while all my Managed Servers are in WLS 9.2 MP2.
Can any one provide me the detailed steps on how to upgrade only the Admin server to WLS 9.2 MP3?
And I read in the Weblogic documentation that this supported. But could not find any detailed steps on how to upgrade only the Admin server to the Major version.
Thanks in Advance.

Hi
1. "And I read in the Weblogic documentation that this supported". Can you please provide the link or documenation that exactly says that this is Supported ???
2. As far as I know, one of the basic requirements for Weblogic Cluster with managed servers across different remote machines is, all the machines, Admin and Managed Servers machines should have Exact Same Version (including Service Pack) of WLS deployed. Right now I do not have this link on top of my head. But this is the only Supported and one basic requirement for Weblogic Cluster.
Since WLS uses all Shared Modules and each Shared module do have like Implementation and Specification Version. If you upgrade admin server domain, most probably config.xml file will be upgraded with all modules version as 10.0.2.3 (something like that). This means when you restart Managed Servers, they will get a new copy of config.xml file from admin server machine. So now on Managed Servers all these modules (10.0.2.3 etc) should exist on their local machines. This is just my thought.
Thanks
Ravi Jegga

Failed to start Admin Server for Weblogic Server Domain

I Created a domain named mydomain in weblogic server 10.3 in server 2003.But when i start Admin Server for Weblogic Server Domain from startmenu, it failed.
I examined the log under domains\mydomain\servers\AdminServer\logs\AdminServer.log and got the following information:
java.lang.NoClassDefFoundError:weblogic/ldap/EmbeddedLDAPChange
at weblogic.ldap.EntryChangeListenerImpl.receiveEntryChanges(EntryChangeListenerImpl.java:28)
Caused by :java.lang.ClassNotFoundException: weblogic.ldap.EmbeddedLDAPChange
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
Caused by :java.util.zip.ZipException: error reading zip file
at java.util.zip.ZipFile.read(Native Method)
at java.util.zip.ZipFile.access$1200(ZipFile.java:29)
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at ...(CommonSecurityServiceManagerDelegateImpl.java:465)
Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at .. (ServiceEngineImpl.java:365)
Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at .. (BootStrapServiceImpl.java:910)
Caused by: <openjpa-1.1.1-SNAPSHOT-r422266:891341 nofatal user error>kodo.jdo.UserException: This operation cannot be perfomed while a Transaction is active.
at org.apache.openjpa.kernel.BrokerImpl.close(BrokerImpl.java:4087)
####<Critical><WebLogicServer><SOA><Adminserver><main><<WLS Kernel>><><><1282012271468><BEA-000362><Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399] Security Services Unavailable
at weblogic.security.service.CommonSecurityserviceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
I ignored some detailed error message.The runtime environment is server 2003 Enterprise Edition sp2.
Thx in advance for any reply.

Hello Djam,
Please review the following:
The FMW WebLogic Server (WLS) installation has been configured to use a non-default Java temporary files directory,
i.e. the following has been set in the WebLogic startup or setDomainEnv.sh script:
EXTRA_JAVA_PROPERTIES="-Djava.io.tmpdir=/appl/oracle/temp_java_files ${EXTRA_JAVA_PROPERTIES}"
Reference: How to Change the WebLogic Server Location for Temporary Files (Doc ID 1336002.1)
When the Middleware home was restored the directory specified by java.io.tmpdir parameter was missing,
Therefore an IOException occurred when opening the wallet and WLS was unable to initialize the OPSS successfully.
To resolve the issue re-create the directory specified by the java.io.tmp dir parameter, and make sure the owner and group access are the same as for the FMW installation.
Unable Start AdminServer: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException (Doc ID 1923395.1)
Bogdan

Use of Lotus LDAP server for WLP 7 - LDAP experts ?

Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
JP

"JP" <[email protected]> wrote in message news:[email protected]..
Hi,
I'm looking for someone who has used the Lotus LDAP server for WLP7
authentication.
I connect my portal to the Domino LDAP, User and Groups are working
fine, but the membership of a user to a group is not.
I assume that it's related to the parameters I use (especially the
membership.filter ?):
"user.filter=(&(uid=%u)(objectclass=person));
user.dn=O=Apac;
membership.filter=(&(uniquemember=%M)(objectclass=groupOfNames));
group.filter=(&(cn=%g)(objectclass=groupOfNames));
server.host=jpgal01.apac.bea.com;
group.dn="
Any help would be appreciate, because I just don't where to look for.
Try setting the com.netscape.ldap.trace property.
\* When -D command line option is used, defining the property with
* no value will send the trace output to the standard error. If the
* value is defined, it is assumed to be the name of an output file.
* If the file name is prefixed with a '+' character, the file is
* opened in append mode.
This will create a ldap trace file of the requests that WLS is making on the
LDAP server. You can then see
where the filters are not returning the correct value for the group
membership.

Derby Server for WLS

Similar Messages

Maybe you are looking for