Descarga de SAP Service

Jovenes alguien me podria indicar como realizar descargar de SAP Services Market Place.
Se los agradezco, ya tengo usuario y contraseña.
Saludos

Gracias ya pude descargar

Similar Messages

SAP Service Not Starting in BI 7.0

Hi All,
Today morning my BI 7.0 server restarted twice automatically, then I started the server in last known good configuration after that when I tried to start the server from SAP MMC it didn't started and when i checked the sap service in services.msc it gives error <b>"Some services stop automatically when they have no work to do"</b>.and didn't get started.
I found a thread similiar to this problem and following that I used sapstartsrv.exe in usr\sap\SID\......\exe directory. This didn't worked for me and by using this Both the services SAPEP2_00 and SAPEP2_01 got removed from services.msc.
Now I have installed these service again and now I am at same status as in morning,
In Event log
For SAPEP2_00 and SAPEP2_01 the following error are avaliable:
--Initialization failed. Service not started. [ntservmain.cpp 1269]
--Unable to change to Directory
gms40\saploc\EP2\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 966]
If any one have gone through such situation please help me out from this, Its has became too critical for me now.
Thanks in advance....
Regards
Vinay Paul

Hi
Service are started now but when I am trying to start the server, it is showing strdbs.cmd, sapcpe.exe in red status "could not be started".
Regards
Vinay Paul
Message was edited by:
Vinay Paul

Error while attaching PDF to FI doc via SAP services

Hi,
I am calling SCMS_DOC_CREATE_FILES funtion module to attach PDF to FI doc via SAP services and SAP internally calling standard function 'HTTP_POST_FILESu2019 with RFC_DESTINATION u2018SAPHTTPAu2019 and returned error due to connection fail.
RFC DESTINATION SAPHTTPA checked and   its working fine.
call function 'HTTP_POST_FILES' destination rfc_destination
    EXPORTING
      uri                   = absolute_uri
      path                  = component_path
      proxy                 = proxy
      trace                 = http_trace
      prefix                = component_prefix
      user                  = user
      pwd                   = password
    IMPORTING
      status                = status_code
      stext                 = stext
      error                 = cerror
      etext                 = comp_err
    TABLES
      resp                  = response_entity_body
      resphead             = response_headers
      reqhead               = request_headers
      comp                  = components
      compx_255             = componentsx
    EXCEPTIONS
      system_failure        = 1 message msg
      communication_failure = 2 message msg.
     output:   Sy-subrc is 0 and status_code is '403'
response_entity_body internal table return the below error information:-
-     HTTP/1.1 403 Forbidden
-     Server: Apache-Coyote/1.1
-     X-ErrorDescription: Genuine channels operation exception: Can not connect to the remote host "gtcp://127.0.0.1:49008". System error message: No connection could be made because the target machine actively refused it 127.0.0.1:49008.
-     Content-Type: text/html;charset=utf-8                           Date: Tue, 08 Nov 2011 21:36:02 GMT
-     Connection: close
Please help i am not to able find the reason why i am getting status_code is '403' and RFC failed.
Thanks
Sireesha
Edited by: Sireesha_SAP on Nov 10, 2011 8:53 PM
Edited by: Sireesha_SAP on Nov 10, 2011 10:16 PM

Hi,
I would like to know what font type, you are using in the forms.
Ideally it should be HELVETICA .
If you are using any other font in your style/form,try changing it to HELVETICA & Test.
Also Check the OTF data at the call of gen. FM,before converting it to PDF.
Regds,
AS
Edited by: abheesawant on Oct 12, 2011 7:48 AM

Error message if i want to register in SAP service market place

Hi...
I am getting this error message while registering in SAP service market place how can i solve this problem and what is the way to register.The following is the error message:
A user ID cannot be created with the specified data, because no (valid) e-mail domain is registered for your customer number.
Please contact your SAP system administrator and request that he/she maintain your company's e-mail domain. You can then request a user ID again here.

Hi,
Did you solve this problem? We are also facing the same..

Getting an error in startdb while restarting sap services

hi Experts ,
while restarting my sap services it gets an error at startdb and log file is shown below
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
16:33:22 22.11.2010   LOG: Effective User Id is root
This is Saposcol Version COLL 20.95 700 - AIX v11.00 5L-64 bit 070920
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 356538) is already running .....
saposcol already running
Running /usr/sap/LBD/SYS/exe/run/startdb
Trying to start LBD database ...
Log file: /home/lbdadm/startdb.log
/usr/sap/LBD/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
                                                                                my startdb.log file
Mon Nov 22 16:33:23 IST 2010
LOGFILE FOR STARTING ORACLE
Trying to start LBD database ...
Mon Nov 22 16:33:23 IST 2010
checking required environment variables
ORACLE_HOME is >/oracle/LBD/102_64<
ORACLE_SID   is >LBD<
Mon Nov 22 16:33:23 IST 2010
check initora
Mon Nov 22 16:33:23 IST 2010
check initora
Mon Nov 22 16:33:23 IST 2010
checking V2 connect
"startdb.log" 77 lines, 2315 characters
Mon Nov 22 16:33:23 IST 2010
LOGFILE FOR STARTING ORACLE
Trying to start LBD database ...
Mon Nov 22 16:33:23 IST 2010
checking required environment variables
ORACLE_HOME is >/oracle/LBD/102_64<
ORACLE_SID   is >LBD<
Mon Nov 22 16:33:23 IST 2010
check initora
Mon Nov 22 16:33:23 IST 2010
check initora
Mon Nov 22 16:33:23 IST 2010
checking V2 connect
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Production on 22-NOV-2010 16:33:23
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/usr/sap/LBD/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = lodhabidev)
(PORT = 1527))) (CONNECT_DATA = (SID = LBD) (GLOBAL_NAME = LBD.WORLD)))
OK (30 msec)
tnsping: V2 connect to LBD
Mon Nov 22 16:33:23 IST 2010
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
R3trans: connect check finished with return code: 12
Database not available
Mon Nov 22 16:33:28 IST 2010
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Mon Nov 22 16:33:53 IST 2010
starting database
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 22 16:33:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1526726656 bytes
Fixed Size                  2021064 bytes
Variable Size             771754296 bytes
Database Buffers          738197504 bytes
Redo Buffers               14753792 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Nov 22 16:35:07 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/LBD/SYS/exe/run/startdb: Terminating with error code 12
~
~
~
~
~
~
starting database
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 22 16:33:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1526726656 bytes
Fixed Size                  2021064 bytes
Variable Size             771754296 bytes
Database Buffers          738197504 bytes
Redo Buffers               14753792 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Nov 22 16:35:07 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/LBD/SYS/exe/run/startdb: Terminating with error code 12
my trans.log file
ETW000 [dev trc     ,00000] Rolling back transaction ...                          38 0.261052
4 ETW000 [dev trc     ,00000] Closing user session (con_hdl=0,svchp=0x11100fb98,usrhp=0x110ffc360)
4 ETW000                                                                             208 0.261260
4 ETW000 [dev trc     ,00000] Now I'm disconnected from ORACLE                     531 0.261791
4 ETW000 [dev trc     ,00000] Connecting as SAPSR3/<pwd>@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000                                                                              56 0.261847
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBa
tch
4 ETW000                                                                              51 0.261898
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x110ff4580 0x11100c9f8 0x111
00c2a8
4 ETW000                                                                              52 0.261950
4 ETW000 [dev trc     ,00000] Assigning username to user session 0x110ffc360        28 0.261978
4 ETW000 [dev trc     ,00000] Assigning password to user session 0x110ffc360        36 0.262014
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8,usrhp=0x110ffc360)
4 ETW000                                                                              63 0.262077
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=28000
4 ETW000                                                                            3892 0.265969
4 ETW000 [dev trc     ,00000] server_detach(con_hdl=0,stale=1,svrhp=0x11100fdb8)
4 ETW000                                                                              46 0.266015
4 ETW000 [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8)
4 ETW000                                                                              61 0.266076
4 ETW000 [dev trc     ,00000] Deallocating server context handle 0x11100fdb8       358 0.266434
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '28000'
4 ETW000                                                                              73 0.266507
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 28000        40 0.266547
4 ETW000 [dblink      ,00431] ***LOG BY2=>sql error 28000 performing CON [dblink#5 @ 431]
4 ETW000                                                                             220 0.266767
4 ETW000 [dblink      ,00431] ***LOG BY0=>ORA-28000: the account is locked [dblink#5 @ 431]
4 ETW000                                                                              69 0.266836
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'LBD'"
                                                                                here i checked my TNSListener is running
please check why it is not starting
Regards

hi sunil
please find below trans.log file
vi trans.log
"trans.log" 97 lines, 9755 characters
4 ETW000 R3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 22.11.2010 - 18:07:14
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Mon Nov 22 18:07:14 2010
     100 0.000100
4 ETW000 [dev trc     ,00000] db_con_init called
      28 0.000128
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)
      54 0.000182
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/LBD/SYS/exe/run/dbo
raslib.o' ...
4 ETW000
      70 0.000252
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/LBD/SYS/exe/run/db
oraslib.o), hdl 0
4 ETW000
   14694 0.014946
"trans.log" 97 lines, 9755 characters
4 ETW000 R3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 22.11.2010 - 18:07:14
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Mon Nov 22 18:07:14 2010                             100 0.000100
4 ETW000 [dev trc     ,00000] db_con_init called                                    28 0.000128
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             54 0.000182
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/LBD/SYS/exe/run/dboraslib.o' ...
4 ETW000                                                                              70 0.000252
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/LBD/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000                                                                           14694 0.014946
4 ETW000 [dev trc     ,00000] Library '/usr/sap/LBD/SYS/exe/run/dboraslib.o' loaded
4 ETW000                                                                              45 0.014991
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000                                                                              49 0.015040
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/LBD/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.144)
4 ETW000                                                                            1087 0.016127
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000                                                                              49 0.016176
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000                                                                             302 0.016478
4 ETW000 [dev trc     ,00000] New connection 0 created                             155 0.016633
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              57 0.016690
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         56 0.016746
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              45 0.016791
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              53 0.016844
4 ETW000 [dev trc     ,00000] Got LIBPATH=/usr/lib:/lib:/usr/sap/LBD/SYS/exe/run:/oracle/client/10x_64/instantclient from e
nvironment
4 ETW000                                                                             531 0.017375
4 ETW000 [dev trc     ,00000] Oracle Client Version: '10.2.0.2.0'                  332 0.017707
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         30 0.017737
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8          8192 0.025929
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPSR3's password           43 0.025972
4 ETW000 [dev trc     ,00000] Connecting as /@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPSR3's password           43 0.025972
4 ETW000 [dev trc     ,00000] Connecting as /@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000                                                                              48 0.026020
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBa
tch
4 ETW000                                                                              50 0.026070
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x110ff4580 0x11100c9f8 0x111
00c2a8
4 ETW000                                                                              62 0.026132
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       38 0.026170
4 ETW000 [dev trc     ,00000] Allocating server context handle                      30 0.026200
4 ETW000 [dev trc     ,00000] Attaching to DB Server LBD (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8)
4 ETW000                                                                              87 0.026287
4 ETW000 [dev trc     ,00000] Assigning server context 0x11100fdb8 to service context 0x11100fb98
4 ETW000                                                                          109025 0.135312
4 ETW000 [dev trc     ,00000] Allocating user session handle                       166 0.135478
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8,usrhp=0x110ffc360)
4 ETW000                                                                              60 0.135538
4 ETW000 [dev trc     ,00000] Assigning user session 0x110ffc360 to service context 0x11100fb98
4 ETW000                                                                           32455 0.167993
4 ETW000 [dev trc     ,00000]         BEGIN DBMS_APPLICATION_INFO.SET_MODULE (:A0, :A1); END;
4 ETW000                                                                             192 0.168185
4 ETW000 [dev trc     ,00000]         BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO (:A0); END;
4 ETW000                                                                             111 0.168296
4 ETW000 [dev trc     ,00000] Now '/@LBD' is connected (con_hdl 0, nls_hdl 0).
4 ETW000                                                                            1135 0.169431
4 ETW000 [dev trc     ,00000]         ALTER SESSION SET NLS_SORT = BINARY
4 ETW000                                                                              62 0.169493
4 ETW000 [dev trc     ,00000]         SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000                                                                             465 0.169958
4 ETW000 [dev trc     ,00000] Got SAPSR3's password from OPS$-user                 962 0.170920
4 ETW000 [dev trc     ,00000] Disconnecting from connection 0 ...                   39 0.170959
4 ETW000 [dev trc     ,00000] Rolling back transaction ...                          37 0.170996
4 ETW000 [dev trc     ,00000] Closing user session (con_hdl=0,svchp=0x11100fb98,usrhp=0x110ffc360)
4 ETW000                                                                             205 0.171201
4 ETW000 [dev trc     ,00000] Now I'm disconnected from ORACLE                     549 0.171750
4 ETW000 [dev trc     ,00000] Connecting as SAPSR3/<pwd>@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000                                                                              57 0.171807
4 ETW000 [dev trc     ,00000] Connecting as SAPSR3/<pwd>@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000                                                                              57 0.171807
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBa
tch
4 ETW000                                                                              52 0.171859
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x110ff4580 0x11100c9f8 0x111
00c2a8
4 ETW000                                                                              51 0.171910
4 ETW000 [dev trc     ,00000] Assigning username to user session 0x110ffc360        29 0.171939
4 ETW000 [dev trc     ,00000] Assigning password to user session 0x110ffc360        35 0.171974
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8,usrhp=0x110ffc360)
4 ETW000                                                                              65 0.172039
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=28000
4 ETW000                                                                            3869 0.175908
4 ETW000 [dev trc     ,00000] server_detach(con_hdl=0,stale=1,svrhp=0x11100fdb8)
4 ETW000                                                                              47 0.175955
4 ETW000 [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=0x11100fb98,srvhp=0x11100fdb8)
4 ETW000                                                                              47 0.176002
4 ETW000 [dev trc     ,00000] Deallocating server context handle 0x11100fdb8       357 0.176359
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '28000'
4 ETW000                                                                              72 0.176431
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 28000        39 0.176470
4 ETW000 [dblink      ,00431] ***LOG BY2=>sql error 28000 performing CON [dblink#5 @ 431]
4 ETW000                                                                             218 0.176688
4 ETW000 [dblink      ,00431] ***LOG BY0=>ORA-28000: the account is locked [dblink#5 @ 431]
4 ETW000                                                                              67 0.176755
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'LBD'"
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
4 ETW000 R3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 22.11.2010 - 18:07:14
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Mon Nov 22 18:07:14 2010                             100 0.000100
4 ETW000 [dev trc     ,00000] db_con_init called                                    28 0.000128
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             54 0.000182
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/LBD/SYS/exe/run/dboraslib.o' ...
4 ETW000                                                                              70 0.000252
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/LBD/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000                                                                           14694 0.014946
4 ETW000 [dev trc     ,00000] Library '/usr/sap/LBD/SYS/exe/run/dboraslib.o' loaded
4 ETW000                                                                              45 0.014991
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000                                                                              49 0.015040
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/LBD/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.144)
4 ETW000                                                                            1087 0.016127
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000                                                                              49 0.016176
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/LBD/SYS/exe/run/dboraslib.o
4 ETW000                                                                             302 0.016478
4 ETW000 [dev trc     ,00000] New connection 0 created                             155 0.016633
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              57 0.016690
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         56 0.016746
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              45 0.016791
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              53 0.016844
4 ETW000 [dev trc     ,00000] Got LIBPATH=/usr/lib:/lib:/usr/sap/LBD/SYS/exe/run:/oracle/client/10x_64/instantclient from e
nvironment
4 ETW000                                                                             531 0.017375
4 ETW000 [dev trc     ,00000] Oracle Client Version: '10.2.0.2.0'                  332 0.017707
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         30 0.017737
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8          8192 0.025929
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPSR3's password           43 0.025972
4 ETW000 [dev trc     ,00000] Connecting as /@LBD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)

Uninstalling SAP services as part of Migration

Hi ,
As part of DB migration , I need to uninstall SAP services on Linux + DB2 platform NW 7.0
How to unistall the SAP services.
pls give the commands/ respective docs.
Thanks a ton

Hi Daniel,
You need to execute sapinst from SAP installation master DVD . Please use Uninstall option available over there.
Later you can clear all the SAP and DB related directories.
Hope this helps.
Regards,
Deepak Kori

SAP Service not getting started

Hi Experts,
After rebooting the WEB AS java server i am not able to restart the SAP services i.e. SAP<SID>_00, SAP<SID>_01 etc.
Gettign the following error
1. Initialization failed. Service not started. [ntservmain.cpp 1497]
2. Unable to change to Directory
<HOST Name>\saploc\<SID>\JC00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 1024]
Could you please let me know regarding this.
Regards,
Sarbjeet Singh

Hi.
If you do a simple search through SCN you will find that similar questions are already answered, for instance - Error_bad_netpath.
Please, follow the [rules of engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement].
Best regards,
Aliaksandr Zhukau

Unable to read data from the SAP Service Marketplace issue

Good morning, experts.
I´ve just installed the SAP Download Manager, but I can´t get connected to Marketplace.
First I tried downloading a file I could see in my Basket Download. Then I deleted it from the basket so I could test only the connection. In both situations I got the same error message: "Unable to read data from the SAP Service Marketplace (...)".
It is probably due to wrong settings, but I can´t figure it out. My settings are:
Address: https://websmp205.sap-ag.de/
User name: S0005951541
Password: (my password)
Proxy (my proxy settings)
Any ideas?

Thanks for your answer.
I can see my download basket online. I realize I didn´t delete the items so I could test purely the connection. I am going to do it again.
I found out I dind´t have permission to download those items, and with the right permission I could download them directly online.
As long as I have more information I am going to repost this issue on a new forum.
Thanks.

SAP Services Terminates unexpectedly

Hello,
Whenever I am executing SAP MMC to start SAP Servers, SAP MMC snap ins hangs and SAP services terminates unexpectedly with the following error in system event log. Sometimes the restarting the server will bring the SAP servers/services up. Kindly advice how to fix this problem.
SAP system landscape is :-
W3KEnterprise 32 x86 - SP1 / MS-SQL 2005 / ECC6 - MySAP ERP 2005
The SAPC5D_02 service terminated unexpectedly. It has done this 1 time(s).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp .
Details
Product:     Windows Operating System
Event ID:     7034
Source:     Service Control Manager
Version:     5.2
Symbolic Name:     EVENT_SERVICE_CRASH_NO_ACTION
Message:     The %1 service terminated unexpectedly. It has done this %2 time(s).
Explanation
The specified service could not continue. This service is configured to report the number of failures and, after a specific number of failures are reported, the Service Control Manager will perform the recovery action configured for the specified service.
User Action
For information that can help you identify possible causes for this error, view the WIN32_EXIT_CODE error that SCM encountered. To view the error, at the command prompt, type
sc query service name
SERVICE_NAME: SAPC5D_01
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 1 STOPPED
                                (NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN))
        WIN32_EXIT_CODE    : 1067 (0x42b)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0

Dear All,
I checked the Note # 877795: A handle leak in sapstartsrv results in accumulating open thread handles, in particular, when closing the connection to the client (SAP MC, sapcontrol, SAP MMC).
Applied Support Package level to 38 and solved the problem.
Thanks & Regards

How do I start the sap service connector

Ive downloaded and installed sap service connector.
But Ive been unable to get it to generate the stfk.oez file.
Please help, thanks,

Sameer,
You have to go to https://service.sap.com/serviceconnection
Then click on the type of connection you want to make.
When the connection shows up on the top of the page then click on it again.
You will go to a screen where you have to enter the time period for the connection and click on a check box for SAP's agreement to connect.
Then on the bottom of that page there is a botton that says connect.
Click on that bottton and the stfk.oez file is downloaded. Then open the stfk.oez file.
At this point if the connection is successfull you will be prompted.
Then click on the bottom of the page for connection Ok
If you are prompted that the connection is unsuccessful. Check and make sure your saprouter is working in sm59 and that the port settings and host name for the service connection are defined properly.
Hope this helps,
Karim

SAP Service named SAP SID _ Instance Number is missing in services.msc

Hi,
SAP Service named SAP<SID>_<Instance Number> is missing in services.msc
Example :
SID = DM0
Instance Number = 01
SAP Service Name = SAPDM0_01
Please help me to resolve the issue.
Thanks in Advance.
Warm Regards,
Sathya

SAPSTARTSRV.EXE
Values :
Operation Selected is "Install Service + Register COM Interface + Start Service"
SID = DM0
NR = 00 or 01
Startprofile = D:\usr\sap\DM0\SYS\profile\START_DVEBMGS01_sapserver
User = DOMAIN\SAPService<SID>
Password = ....
Now the SAP Service, SAP<SID>_<Instance Number> is created in services.msc.
Thanks www.sdn.sap.com
Edited by: Sathya Kala Veeraraj on May 6, 2010 12:12 AM

Problem downloading Patch Set Oracle 10.2.0.5 from SAP Service Market Place

As mentioned in SAP Note 871735:
Oracle patch set 10.2.0.5
To navigate to the DVD download:
1. On the right-hand side under 'Software Download', select the relevant
software variant:
- Oracle 10.2 software (64-bit)
- Oracle 10.2 software (32-bit)
2. Choose 'Installation'.
3. Select your platform.
4. Choose 'Oracle'.
5. Select the relevant ORACLE RDBMS DVDs.
6. Add the DVD to the 'Download Basket'.
However, when I click on the "Oracle 10.2 software (64-bit)", the right-hand side of the page goes blank and just says Oracle on top? In the search, I also can't find the 51040057_4.
Is it due to the SAP Service Marketplace account restrictions or what?
We have our SAP on DB2.

We have our SAP on DB2
This could be the reason as to why you are not able to download Oracle patches.
Regards,
SBK

Create SAP Service into the same solution.

Hi Experts,
Need help for creation SAP service which is always in running mode like a Alert management.
Right now i am going to develop new AddOn for SMS Integration.
In that i need active service which is runing in back end and when i am going to place any transaction then that time automatically
send message to that customer.
I am confused where to write service code in my solution.
If any one have any idea please suggest me.
Thank you Experts
Pradeep Khodke

Yes, Johan you are r8, when purchase/sales/production/inventory any transaction at the time of adding or update I need to get same data out of the B1 database, build a message, and send that message to that vender which is present in same transaction record.
For Example -
I am going to enter 1 sale order for Mike of Rs 10,000 , and after sale order placed i have to send sms msg immediately to mike(msg -Your Order totalling INR.10,000 was proccessed. )
for that what can i do?????
Thanks and Regard
Pradeep

Issue working with WPF client v6.1.0.3 for SAP Service Manager 4.0

Hi All,
This issue is similar to an on - going discussion - http://scn.sap.com/thread/3508608
Issue Description :
1. We installed WPF client 6.1.03 for SAP Service Manager 4.0 using SMP 2.3 SP00. We got the below error
2. To solve this error we followed the forum - http://scn.sap.com/thread/3465106 and installed the certificate following the link for installing the self signed certificate from Sybase infocenter.
3. We came to know that this is due to the SMP version. hence as suggested by SAP we upgraded the server to SMP 2.3 SP03
4. We tried to connect the WPF client and again got the error "Communication error 14"
My Question is
1. After the server upgrade from SP2.3 SP03 , do I still need to generate a certificate again ? Is yes Please guide me the steps/document to do this step
2. Is there any document which mentions how exactly we use the WPF client, the configuration to connect the SAP backend and download the Syclo Service Manager 4.0 application without any issue
Please guide
Thanks
Neha

HI Steve,
I tested with the WPF client 6.1.3.X.
I was getting a different error with the host name "Connect to server myhostname certificate is for myhostname:domain name this is not valid. Commnication error(14)
However I got the solution in one of the link where they mention to provide the complete fully qualified domain name in the server ie myhostname:domain .
This has solved the issue and the WPF client is up and running.
Thanks for the help
Regards
Neha Mahanty

Scenario and Process Component List: Available on SAP Service Marketplace

<b>Is the following useful to a BPX?</b>
Warning: It is only available to those with a Service Marketplace logon.
This was shared by Content Strategist: Scott Jones:
The latest version of the Scenario and Process Component List on SAP Service Marketplace narrows the gap between the business view and the technical view of SAP's product portfolio. Customers can not only find out technical realization alternatives for SAP's business scenarios and processes, but also analyze which scenarios are possible with a given set of already implemented components. For planned upgrades, customers can analyze which scenarios have been enabled as well as which scenarios may no longer be available or require further upgrades of other components.
All new features can also be reviewed in the "<a href="https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000682251&_SCENARIO=01100035870000000202&">what's new</a>!" section. Access the Scenario and Process Component List at SAP Service Marketplace (<a href="http://service.sap.com/scl">http://service.sap.com/scl</a>).

Did you ever resolve this issue? I am facing exactly the same issue and have the same question.

Descarga de SAP Service

Similar Messages

Maybe you are looking for