Desconecto auriculares y se va el audio

El audio de mi ipad se fue por los altavoces incorporados, funciona de vez en cuando, he probado de todo y nada lo soluciona, solo funciona con auriculares, se que estan buenos, por que entro a configuracion, sonidos le doy a volumen y suena.
También desapareció la barra de sonido sin los auriculares, y a la vez no funciona el botón de subir o bajaar volumen.... alguien sabe que puede estar ocasionando esto?
será problema de hardware o software?

Podrían ser distintas cosas, pero he sabido de varias personas que han tenido este problema usando dispositivos que tienen el conector antiguo, no el lightning sino el ancho.Y es un problema de Hardware. La barra de volumen desaparece tal como lo hace al estar conectado a algún parlante (con control propio de volumen). y al conectar el audifono cambia desde modo parlante, a audifonos (en vez de pasar al altavoz incorporado)
La solución es revisar el conector, tratar de limpiarlo. Existen videos en que muestran formas de solucionarlo. pasa tanto en iPads como en iPhones.
http://youtu.be/y0D6uvrSHS8 Este video habla del problema (esta en Inglés)
En el siguiente video se muestra otra posible solución, que sé le soluciono el problema a un conocido pues el me lo envió, pero que debe hacerse con cuidado.
http://youtu.be/Yr0hoqjFMp0
Espero puedas solucionarlo

Similar Messages

  • No tengo audio en el ipad, solo si conecto unos auriculares o bocinas

    no tengo sonido en el ipad solo si conecto unos audifonos, si los desconecto no sale audio ni nada, tengo todo activado audio y volumen y ya restaure el software y nada lo soluciono

    ME pasa casi lo misno, solo que no me sale el mensaje efectos de sonido, entre tanto urgietear creo que lo tuyo se soluciona con ajustes > sonido y desactivar la funcion bajo la barrita de volumen

  • Hp pavilion dv6 notebook pc y tengo problemas de audio que puedo hacer

    itunes y windows media player no funcionan totalmente pero si entro a you tube y conencto los auriculares puedo escuchar musica y una vez que los desconecto a veces funcionan los altavoces de la laptop pero a veces no.

    Get your Product Number by pressing Fn + Esc key or check the Service Tag attached to bottom, may be under battery.
     Go to the link below.Enter your Product Number .After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • No tengo audio en mis altavoces M30-70

    Hola,
    Compré mi ordenador hace una semana, y los altavoces funcionaban bien. Me conecté a una clase con los auriculares y funcionaban bien tambien.
    Luego de esto ya no funcionan ni los altavoces ni los auriculares. Todos los settings estan bien, pero no cuando quiero hacer la prueba de sonido me sale un error como que no se puede reproducir el sonido de prueba.
    He reiniciado ya el ordenador y nada.
    Que debo hacer?
    Gracias

    Hola Monpepa que tal,
    Puede ser que el servicio de audio de Windows no este iniciado, verificalo, presiona teclas Windows + r escribe services.msc , ubica audio de Windows debe estar en ejecución si no es así inicialo.
    Puede que también el problema sea relacionado al controlador,verificarlo en administrador de dispositivos, puede que ayude quitar el controlador actual para luego re-instalar, el controlador de audio se ubica en D/driver o sigue este enlace http://support.lenovo.com/es/es
    Un saludo.
    @Antony_Vamu
    Comunidad en Español  English Community  Deutsche Community  РусскоязычноеСообщество
    Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!!

  • USB audio error 4800

    Tengo el VI anexo (LV2013) para generar un tono 1Khz en cualquier dispositivo de audio conectado a la PC.
    Cuando conecto un dispositivo de audio USB y corro el VI funciona correctamente generando un tono 1K.
    Si desconecto la unidad y conecto otra del mismo modelo (Mismo PID) funciona correctamente.
    Pero si desconecto la unidad y conecto otro dispositivo de audio USB de otro modelo (con otro PID diferente) entonces al correr el VI no se genera ningun audio y me sale el error 4800.
    La unica forma de que funcione el VI es que cierre la aplicacion y la vuelva a abrir.
    Parece que la entrada del sub VI "sound output configure.vi" tiene conflicto.
    No quiero tener que cerrar o detener la aplicacion para cambiar de modelo y correr esta prueba.
    Ya probé cambiando en valor de Devide ID cuando sale el error a otros valores y no funciona.
    Solo tengo un dispositivo de audio conectado a la PC y la tarjeta de audio de la PC la tengo deshabilidata.
    Alguien tendra alguna sugerencia o solucion a este problema ?
    Me sale error al subir el VI pero he mandado una imagines del diagrama y panel.
    Saludos y gracias de antemano
     

    Hola Goo13m
    Cuando conecto la unidad solo hay un dispositivo de audio conectado. La tarjeta de audio esta deshabilitado por lo tanto el Devide ID siempre es 0.
    He intentado cambiar este valor y no se resuleve el problema.
    En cuanto al Express VI de Play Sound, inicialmente solo me da opcion al dispositivo conectado con ID 0
    Hice la prueba de conectar los dos dispositivos en diferentes puerto y configurar el VI para cada uno. Esto funciona. Si cambio el ID, se escucha el audio en el dispositivo correcto. Funciona incluso si desconecto un dispositivo y genero audio en el otro dispositivo.
    Sin embargo, si el ID1 lo desconecto del puerto USB y lo cambio al otro puerto, me sale el mismo error.
    Solo deseo usar un puerto USB debido a que si quiero probar 10 modelos diferentes no puedo usar un puerto para cada modelo. No seria practico.
    Lo correcto es que en un solo puerto pueda conectar cualquier modelo.
    De esta forma sigo con el problema y continuo haciendo pruebas.
    Si alguien tiene alguna ayuda o comentario se les agradece.
    Saludos

  • No suena ningun sonido, por estar en posicion Auriculares fijo

    El iphone 4 de mi mujer de golpe, ha dejado de oirse cualquier sonido. He observado que si subes o bajas el volumen, aparece en pantalla "Auriculares", sin tenerlos puestos y no se como puedo dejarlo en la posición "Timbre".

    Entiendo y lo que comento al inicio sobre el panel de control del controlador del audio?, no se que tan util podria resultar esto para tu problema, suponiendo que solo utilices el micrfono externo el splitter no intervendria.
    Te dejo unas capturas:
    El panel varia segun el controlador de audio, Realtek o Smart, Panel de control\Hardware y sonido , se ubica al final de la lista.
    Sobre la configuración de Windows al des-habilitar el microfono interno este debe quedar asi, mantienes el controlador de fabrica relacionado al audio?, que sucede si des-instalas el controlador de audio y queda con el de Windows?.
    Un saludo.
    @Antony_Vamu
    Comunidad en Español  English Community  Deutsche Community  РусскоязычноеСообщество
    Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!!

  • Problema Audio yoga 13

    Hola, bueno mi problema es que el audio de mi yoga 13 dolby home theater v4, cuando conecto un auricular para escuchar música, se escucha muy mal, sin auricular función todo bien , pero lo conecto y el audio es como metálico, reinstale el driver pero sigue igual, espero que me ayuden, Saludos

    Hola luxdh,
    has usado algun ecualizador?
    Saludos!
    ¡Un saludo!
    Victor H. Diaz @VictorDiaazz
    Spanish Community Moderator
    Es importante recalcar también que los foros suplementan los recursos de los usuarios de Lenovo pero no reemplazan el servicio técnico oficial. Para un listado de números de servicio sigue el enlace: Numeros de Soporte
    Comunidad en Español  English Community  Deutsche Community   Русскоязычное Сообщество

  • Mi portatil b50-70 no detecta los auriculares

    Buenos días, ayer mi portátil dejó de detectar los auriculares. Los conecto y no aparecen ni siquiera en dispositivos de reproducción. He probado a reinstalar los drivers, restaurar sistema, y nada. ¿Será un fallo del hardware? Muchas gracias

    Hola basileus que tal,
    Puedes hacer 2 pruebas para descarte:
    1.-Quitar el controlador de audio, reiniciar quedara con el de Windows, conectar los auriculares.
    2.-Cargar un sistema Linux (Ubuntu) en modo live este no se instala en disco duro, reproducir algún archivo y conectar los auriculares, si tienes dudas sobre esto ultimo y como hacer este descarte comentarlo para echarte una mano.
    Un saludo.

  • Unable to capture audio

    Hi,
    Last week I updated the drivers for my Blackmagic Multibridge extreme. Now when I try to capture the material in FinalCutPro 5.1.4 I can see the picture, hear the sound on my monitors (they are connected directly to Multibridge), but the captured material doesn't have sound, because it takes the sound from the internal audio input. I tried to capture from Blackmagic Deck Control (an external application) and it works fine, it captures with sound. So I suspect I have to change the audio input in FCP, but dont know where. In audio/video settings in FCP everything is set to DeckLink (Multibrige extreme).
    Where is the problem?
    Thanks,
    Simon

    Thanks for the reply.
    Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

  • Unable to capture audio from BlackMagic HD Extreme via Voice Over tool

    Hi !
    I'm trying to capture audio via my BlackMagic HD Extrem card using the Voice Over tool in FCP6, but I can't, no audio is incoming.
    I can ingest audio with video using log and capture, then I know my card and my cables are working.
    I tried to set the BM card as audio input in my Audio's System Prefereces Pane, but it isn't working either.
    I've been looking on the BM website, but I found nothing.
    Can you help me ?
    Thx

    Thanks for the reply.
    Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

  • Unable to capture 2 audio tracks

    FCP refuses to capture 2 audio channels?! I have one mic on channel 1 and another mic on channel 2 but FCP captures only 1 mono track eventhough in Clip Setting both channel 1 and 2 are selected. Does anybody know what could be wrong?
    Another thing is that when I have captured a clip - it won´t appear automatically in the Browser as it always has done? Now I need to import the Clip from my Project folder. FCP going crazy.

    Hi boxpuppy,
    iTunes is not able to import some Windows Media Player files. See this article for further information -
    Importing Windows Media Audio files with iTunes for Windows
    http://support.apple.com/kb/HT1844
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Audio malfunctio​ning on hp ultrabook?

    Hello! So i just recently got a laptop in late june almost early july.
    Its a HP ENVY touchsmart 4 Ultrabook
    Its not even 2 months old and the speakers on here suck. They kida slurr and like lag. Its stutters really bad. I can't listen to 1 song without it doing that. And sometimes it freezes but only very quickly. And also my down arrow button came off like within 2 weeks.
    This is my first Laptop so im not sure if i can return this and get a new one because its audio is malfunctioning and stuff? I have a one year warranty on this.

    Hello Gurjot24,
    If you want to return it rather than getting it fixed, please contact HP support over the phone to see what options are available.
    If you are in the US or Canada the number is 1-800-474-6836, if you reside in a different location click on this link. Click on your country, then click “technical support after you buy”, and the number will be provided.
    I hope everything works out.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • How do I use my web cam to record audio and video? I can get the video to work but no sound.

    I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

    PwmBoat,
    This made me smile, because things like this do make me smile...  I never make videos on YouCam, but I did this time, so I could test this one out.
    You did not say what webcam software you are using...
    ======================================================================
     Video and audio recording works on YouCam V3.5.1.4606
    Make sure you have turned on a working microphone in Settings:
    YouCam > Right-Side   Settings >
    Right-Side, Lower-Right, Select a working Microphone from the Drop down list
    AND
    CHECK "Capture with audio"
    OK
    You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too.  (They have 3.x as well, but why buy what HP already gives you?)
    ==========================================================================
    I hope this helps!                                 
    We work hard to help!
    Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
    2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • I have an apple iphone 4 that I want to download audio books from my library onto it.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    I have an apple iphone 4 that I want to download audio books from my library onto.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

  • Why does GarageBand audio work for guest user but not my account?

    Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
    About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
    This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
    After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account?  Then we will need to troubleshoot your preferences."
    I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?

    If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
    But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
    Remove these files from your User Library to a folder on your Desktop:
    ~/Library/Containers/com.apple.garageband10/
    ~/Library/Preferences/com.apple.garageband.plist
    ~/Library/Caches/garageband
    Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
    You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
    Select the "Home" folder icon (the little house)  in the Finder's sidebar and press the key combination ⌘J to open the "view options".
    Enable "Show Library Folder".
    Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside:  ~/Library/Containers/com.apple.garageband10/,
    ~/Library/Caches/garageband  .

Maybe you are looking for