Descrete Vs Repetative
Hi,
Can anybody tell me please why in repetative manufacturing production orders are not involved.. but planned orders itself acts as production order.
Pavan
Hi Pavan,
The functionality has given by SAP to simplify the rem manufacturing to carry out the production with planned orders. If you have correct master data then MRP creates RS type of planned orders which are convertable to production orders and sufficient to carry out the production at shop floor. This will reduce the shop floor activities and ciontrolling with production orders.
There are lot difference between rem and discreate but the main diffrences are discreate is based order based manufacturing with production orders,,rem is period based manufacturing with planned ordrs. In discreate products changed frequently from order to order bur in rem the products will remain same for long period of time.
if any question please revert with rewarding suitable points.
Regards
TAJUDDIN
Similar Messages
-
Diff. bet Repetative & Descrete mfg.
hi...
whats the diff. bet Repetative & Descrete mfg.
can i get some detailed ldifferenceplease search in the forum..many threads with good explantiion available.
These are three ways of production in a industries can happen.
PP-discreet required where there will be discrete orders passing through a work center, here the capacity planning plays major role. i.e. if you have a lath machine, many orders are going through this lathe m/c and schedule plays very important role w.r.t lath as well as the product as the product has to go through many work centre. Every time the product many not be same can be different, but same work center can be used for many products.
In PPPI- We are mainly concerned with quality parameters and Process management i.e control recipe is configured in this module. But the difference is the o/p is almost same you will not change the product, but every step is very impartment to achieve the product quality. And it is entered by operator and approved by shift supervisor through control recipe function.
REM- mainly to reduce the data input by person working in SAP and in this case we are bother about period end costing not the each order level costing as the process is repetitive and one order is sufficient for the wile life. -
I can go into Firefox without any trouble but when I enter my Textpattern Web to work on and change, the log in appears, I open it but as soon as I start to work it goes back to log in and the following message comes out
“Para mostrar esta página, Firefox necesita enviar información que repetirá cualquier acción (como una búsqueda o una confirmación de compra) realizada anteriormente. “reenviar or cancelar)”
I click on to “reenviar” and nothing happens. How do I solution this problem? My web has been working for two years without any trouble; I am creating a ceramic dictionary in three languages in with illustration. My web is www,ceramicsbensu.es
== This happened ==
Every time Firefox opened
== Sunday 18th july 2010 -
*Hi friends,*
*Here i am using ext no range for batch managment.but here i don't want same no should be repeat for any next batch.*
*For ex-: 999 batch no is used for 1 one material while movements, that should not be used in any future batch. system shows some error in case of repetation of used no.*
Regards
AmitHi Amit
You have to use the user exit to achieve this.
The following are the 2 user exits available, use the suitable one for your requirement.
In the function module exit EXIT_SAPLV01Z_003, an external number range XY is determined, against which the batch numbers are checked.
In the function module exit EXIT_SAPLV01Z_004, the batch number entered is checked against your own rules.
Regards
Bala -
Hello,
Any one used row repeter UI element. how do we use this in our application.
I have one case can we use it in this.
I need to add my input feilds in runtime.
means I have a input feild on my screen and a add button when I press add button,
I should be able to get another input feild in next line and i should be able to input values,
This should happen n times depending on requirement.
Thanks & Regards,
Ajayhi ajay.........
in that case you need to go for dynamic programming..
you have the class cl_wd_input_field which as a method new_input_field which adds an input field....
make sure that you cahnge the name of it every time you add.... initially try with only 1 input field.... you can get an idea of it when you work.
---regards,
alex b justin -
Mapping descrete values to childs of a complex type array
Hi all,
I have the following flat XML file with descrete values as source:
<MaterialRequest_MT>
<number><b>number1</b></number>
<shortdesc><b>shortdesc1</b></shortdesc>
<projectname><b>projectname1</b></projectname>
</MaterialRequest_MT>
My problem is how to map this file to the following destination file where the single values of the source file are values of a child element in a list of complex elements:
<ns0:query xmlns:ns0="http://QueryService">
<ns0:attributes>
<ns0:item>
<ns0:key>
<ns0:system>MP</ns0:system>
<ns0:name>PartNumber</ns0:name>
</ns0:key>
<ns0:value><b>number1</b></ns0:value>
</ns0:item>
<ns0:item>
<ns0:key>
<ns0:system>MP</ns0:system>
<ns0:name>Description</ns0:name>
</ns0:key>
<ns0:value><b>shortdesc1</b></ns0:value>
</ns0:item>
<ns0:item>
<ns0:key>
<ns0:system>MP</ns0:system>
<ns0:name>Project</ns0:name>
</ns0:key>
<ns0:value><b>projectname1</b></ns0:value>
</ns0:item>
</ns0:attributes>
</ns0:query>
As you see I don't have a source array over which to iterate. This makes it impossible to me to map the source values to the destination items.
Any help is very appreciated!
Thanks!
DenisHi
<b>Mapping for item node:</b>
Create a user defined function with 3 input parameters for number,shortdesc,projectname. In the user defined function check whether each input value exists or not.if the input value exists add the code 'result.addValue("")'.if the 3 input values exist then 3 item nodes will be created.
<b>Mapping for elements</b>
Create another user defined function with 3 parameter.take the 3 input values same as the above function. Check whether parameter a value exists in the element and write <b>result.addValue(a[0]);</b>Do similarly for b and c parameters. After defining this function add standard node function 'splitbyvalue' and assign to the target.
USedefined function---->splitbyvalue--
>value.
I guess this solution is a bit complex.....hope it works
regards
Suneel
Message was edited by: Suneel
Message was edited by: Suneel -
hI
i have made one PLD.
Two repetative area, one for parameter listing , one for query data , are used in that pld.
When i tried to add one more Repetative area, i have seen that Add icons or menuprompt for Repetative area , is deactive.
So i cann;'t add repetative area in PLD.
Please help me
on this matter.
KunalHi Dhanalakshmi
Thanks
i had worked on QUERY PLD.
Yes, we cann't add more then existing two default repetative area
So for summary report, i will have to make new another QPLD with Same Query.
This is Greatest Limitation of QPLD.
Thanks for valuable information.
Regds
Kishore -
PLD Freight in Repetative Area
Hi Experts,
I have 20 items in A/R Invoice, and have 1 Freight amount say at 1500/-
I am trying to give detail in the A/R Invoice PLD, for this I added one more Repetative Area, but the Freigt details are appearing 21 times (as many times the number of items there are in the invoice).
How can I make the detail appear only once in the another repetative area.
Is there any way to group the freight field, and prevent it from appearing more than 1 number of times
Regards,
Murtaza R.E.Hi,
Could you please try out the following:
1. Create UDFs on Marketing Document header level - number of UDF
depending on the max number of Additional Expenses from the OEXD
2. Use query like below for UDF1:
SELECT T2.EXPNSNAME + ' ' + STR(T1.LINETOTAL) + ' ' +
STR(T1.VATSUM) + ' ' + STR(T1.VATPRCNT)
+ ' ' + STR(T1.LINEVAT)
FROM OINV T0
INNER JOIN INV3 T1
ON T0.DOCENTRY = T1.DOCENTRY
INNER JOIN OEXD T2
ON T1.EXPNSCODE = T2.EXPNSCODE
WHERE T0.DOCNUM = $[OINV.DocNum]
AND T1.LINENUM = 0
Use query like below for UDF2:
SELECT T2.EXPNSNAME + ' ' + STR(T1.LINETOTAL) + ' ' +
STR(T1.VATSUM) + ' ' + STR(T1.VATPRCNT)
+ ' ' + STR(T1.LINEVAT)
FROM OINV T0
INNER JOIN INV3 T1
ON T0.DOCENTRY = T1.DOCENTRY
INNER JOIN OEXD T2
ON T1.EXPNSCODE = T2.EXPNSCODE
WHERE T0.DOCNUM = $[OINV.DocNum]
AND T1.LINENUM = 1
and so on.
3. Add the UDF to the Layout.
NOTE: The line number is important as there can be more than
one additional expense for the same Document Number;
Note that the query draws the details of one single record per
from the Add Expenses Table. You can make the amendments in the
query as required by either removing or adding more fields;
like increase space between the fields etc
Hope this will help.
Regards,
Gagan Thareja
SAP Business One Forums Team -
Dear gurus,
i have maintained inspection type 13 for repetative mfg,
1) wht setting should be done in rate routing for inspection point?
2) when the inspection lot generated automatically.
pleased help me out
Regards
PravinHi,
Repetitive Mfg : In process inspection procedure steps:
1. Material master> QM view> maintain Inspection type 13.
2. Create Rate Routing for the material, maintain the Operation and control key for Inprocess Inspection, assign the Master inspection Charateristics.
3.Do all the Planning and Execution of planned orders for the material.
4. Goto MFPR T code, enter the fields: material and Plant and Prod Ver. if you have.
Excecute inspection lot for material will be visible and release the Inspection lot for the material.
5. Goto QE51N Tcode and input the material and plant and execute, you will find the Inspection lot, input the results.
Hope this is clear.
Navin. -
Very urgent please ----repetting values in the output
I am getting values for acc seq access seq number and codndition table repeting values as in the output of the report, please have a look in my code and please do respond immediatley.
regards always, below is my code and output
REPORT zmaster_condition LINE-COUNT 80 LINE-SIZE 225.
D A T A *
INCLUDE zmaster_condition_top.
S E L E C T I O N S *
SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-b01.
SELECT-OPTIONS: s_kvewe FOR t683s-kvewe,
s_kappl FOR t683s-kappl,
s_kalsm FOR t683s-kalsm,
s_kschl FOR t683s-kschl,
s_kabnr FOR t682i-kotabnr,
s_kozgf FOR t682i-kozgf.
SELECTION-SCREEN END OF BLOCK b01.
*SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-s04.
*PARAMETERS: p_vari LIKE disvariant-variant.
*SELECTION-SCREEN END OF BLOCK b4.
**SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
*SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
PARAMETERS R1 RADIOBUTTON GROUP RADI1 DEFAULT 'X'.
*SELECTION-SCREEN END OF BLOCK b02.
A T S E L E C T I O N - S C R E E N *
M A I N P R O G R A M *
START-OF-SELECTION.
*Initializing the local tables.
CLEAR:it_t682i,it_t683s,it_t685.
REFRESH:it_t682i,it_t683s,it_t685.
clear it_output_report.
refresh it_output_report.
*Selection of data from pricing procedure tables
SELECT kvewe kappl kozgf kolnr kotabnr FROM t682i
INTO TABLE it_t682i
WHERE kvewe = 'B'
AND kappl = 'V1'.
SELECT kvewe kappl kalsm stunr zaehk kschl FROM t683s
INTO TABLE it_t683s
WHERE kvewe = 'B'
AND kappl = 'V1'
and kschl in s_kschl
AND kalsm IN s_kalsm.
sort it_t683s by kvewe kappl.
DELETE adjacent duplicates FROM
it_t683s .
SELECT kvewe kappl kschl kozgf FROM t685
INTO TABLE it_t685
WHERE kvewe = 'B'
AND kappl = 'V1'
AND kschl IN s_kschl
AND kozgf IN s_kozgf.
LOOP AT it_t683s.
it_output_report-kvewe = it_t683s-kvewe.
it_output_report-kappl = it_t683s-kappl.
it_output_report-kalsm = it_t683s-kalsm.
it_output_report-stunr = it_t683s-stunr.
it_output_report-zaehk = it_t683s-zaehk.
it_output_report-kschl = it_t683s-kschl.
SELECT kvewe kappl kozgf kolnr kotabnr FROM t682i
INTO TABLE it_t682i
WHERE kvewe = it_t683s-kvewe
AND kappl = it_t683s-kappl
and kozgf in s_kozgf
and kotabnr in s_kabnr.
clear it_t682i.
loop at it_t682i.
it_output_report-kozgf = it_t682i-kozgf.
it_output_report-kozgf = it_t682i-kozgf.
it_output_report-kolnr = it_t682i-kolnr.
it_output_report-kotabnr = it_t682i-kotabnr.
APPEND it_output_report.
CLEAR it_output_report.
endloop.
APPEND it_output_report.
ENDLOOP.
E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*Output to a list
FORMAT COLOR 2 .
WRITE:/2 'Usage',09 'App',17 'Proced',24 'Step',
37 'Counter',50 'CondType',63 'Description',85 'AccSeq',
97 'AccSeqNum',108 'ConTable'.
WRITE:/1(225) sy-uline.
LOOP AT it_output_report.
WRITE:/ it_output_report-kvewe UNDER 'Usage',
it_output_report-kappl UNDER 'App',
it_output_report-kalsm UNDER 'Procedure',
it_output_report-stunr UNDER 'Step',
it_output_report-zaehk UNDER 'Counter',
it_output_report-kschl UNDER 'CondType',
it_output_report- UNDER 'Description',
it_output_report-kozgf UNDER 'AccSeq',
it_output_report-kolnr UNDER 'AccSeqNum',
it_output_report-kotabnr UNDER 'ConTable'.
it_output_report- UNDER 'SalesOrg',
it_output_report- UNDER 'DocType'.
it_output_report- UNDER 'Customer'.
ENDLOOP.
output of the report:
Usage App Proced Step Counter CondType AccSeq AccqNum ConTable
B V1 V10000 220 00 ZCR1 Z200 05 511
B V1 V10000 220 01 ZRAS Z200 05 511
B V1 V10000 225 00 ZTPT Z200 05 511
B V1 V10000 230 00 ZOP4 Z200 05 511
B V1 V10001 010 01 RD03 Z200 05 511
B V1 V10002 010 00 ZREP Z200 05 511
B V1 V10000 200 00 ZOP3 z200 05 511
B V1 V10000 130 00 ZOC3 z200 05 511i would like to thanks you for your valuable help.
i am still getting repeated values for access seq , access number and cond table,last three columns in the output, pls see as it it is very urgent...
here is the code:
REPORT zmaster_condition LINE-COUNT 80 LINE-SIZE 225.
D A T A *
INCLUDE zmaster_condition_top.
S E L E C T I O N S *
SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-b01.
SELECT-OPTIONS: s_kvewe FOR t683s-kvewe,
s_kappl FOR t683s-kappl,
s_kalsm FOR t683s-kalsm,
s_kschl FOR t683s-kschl,
s_kabnr FOR t682i-kotabnr.
s_kozgf FOR t682i-kozgf.
SELECTION-SCREEN END OF BLOCK b01.
*SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-s04.
*PARAMETERS: p_vari LIKE disvariant-variant.
*SELECTION-SCREEN END OF BLOCK b4.
**SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
*SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
PARAMETERS R1 RADIOBUTTON GROUP RADI1 DEFAULT 'X'.
*SELECTION-SCREEN END OF BLOCK b02.
A T S E L E C T I O N - S C R E E N *
M A I N P R O G R A M *
START-OF-SELECTION.
*Initializing the local tables.
CLEAR:it_t682i,it_t683s,it_t685.
REFRESH:it_t682i,it_t683s,it_t685.
REFRESH it_output_report.
SELECT kvewe kappl kalsm stunr zaehk kschl FROM t683s
INTO TABLE it_t683s
WHERE kvewe IN s_kvewe
AND kappl IN s_kappl
AND kalsm IN s_kalsm
AND kschl IN s_kschl.
*delete adjacent duplicates from it_t683s comparing
kvewe kappl kschl.
SELECT kvewe kappl kozgf kolnr kotabnr FROM t682i
INTO TABLE it_t682i
FOR ALL ENTRIES IN it_t683s
WHERE kvewe = it_t683s-kvewe
AND kappl = it_t683s-kappl
AND kozgf IN s_kozgf
AND kotabnr IN s_kabnr.
LOOP AT it_t683s.
it_output_report-kvewe = it_t683s-kvewe.
it_output_report-kappl = it_t683s-kappl.
it_output_report-kalsm = it_t683s-kalsm.
it_output_report-stunr = it_t683s-stunr.
it_output_report-zaehk = it_t683s-zaehk.
it_output_report-kschl = it_t683s-kschl.
move-corresponding it_t683s to it_output_report.
sort it_t683s.
sort it_t682i.
READ TABLE it_T682i with KEY KVEWE = it_T683s-KVEWE
kappl = it_t683s-kappl.
LOOP AT it_T682i WHERE KVEWE = it_T683s-KVEWE
AND kappl = it_t683s-kappl.
AND kotabnr IN s_kabnr.
IF SY-SUBRC EQ 0.
move-corresponding it_T682i to it_output_report.
it_output_report-kozgf = it_t682i-kozgf.
it_output_report-kolnr = it_t682i-kolnr.
it_output_report-kotabnr = it_t682i-kotabnr.
ENDIF.
APPEND it_output_report.
ENDLOOP.
*DATA TAB(4).
*DATA VKORG LIKE TAB-VKORG.
*CONCATENATE it_t683s-kvewe it_t682i-kotabnr INTO TAB .
*SELECT SINGLE VKORG INTO VKORG FROM TAB WHERE
KSCHL = 'ZRC1'.
E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*Output to a list
FORMAT COLOR 2 .
WRITE:/2 'Usage',09 'App',15 'Proced',24 'Step',
37 'Counter',50 'CondType',63 'Description',85 'AccSeq',
97 'AccSeqNum',108 'ConTable'.
WRITE:/1(225) sy-uline.
LOOP AT it_output_report.
WRITE:/ it_output_report-kvewe UNDER 'Usage',
it_output_report-kappl UNDER 'App',
it_output_report-kalsm UNDER 'Proced',
it_output_report-stunr UNDER 'Step',
it_output_report-zaehk UNDER 'Counter',
it_output_report-kschl UNDER 'CondType',
it_output_report- UNDER 'Description',
it_output_report-kozgf UNDER 'AccSeq',
it_output_report-kolnr UNDER 'AccSeqNum',
it_output_report-kotabnr UNDER 'ConTable'.
it_output_report- UNDER 'SalesOrg',
it_output_report- UNDER 'DocType'.
it_output_report- UNDER 'Customer'.
here is the output:
Report to list out all Condition Records for Output and Pricing.
Usage App Proced Step Counter CondType AccSeq AccSeqNum ConTable
B V1 V05000 010 01 AF00 Z001 05 551
B V1 V05000 020 02 MAIL Z001 05 551
B V1 V05000 030 01 ESYM Z001 05 551
B V1 V06000 010 01 AN00 Z001 05 551
B V1 V06000 020 02 MAIL Z001 05 551 -
Display the Repetative area in Incoming and Outgoing payments
Hi Experts,
Can any one help me how to Display the Repetative area Header,Repetative area and Repetative area Footer in the
Incoming and Outgoing payments....
Urgent .... Pls...
KarthiHi Sumpath,
Then how can i get printout for posted Incoming payments with Row Level data.
Per day 10 Numbers of Payments are made, For that i need to take printout daily with row details...
By default SAP Print out also not executing row level datas, i dont why or any other procedure to enable row level datas..
karthi -
Sir,
While carring out repetative manufacturing scenario what are the details to be mentioned in production version in mrp4 in planning data like detaile ,rate,rough cut planning once maitained it shows an warnig like the date doesnot math with alternate bom,detailed plannig ,rate planning,rough cut plannig. the company does have repetative manufacturing scenario, how to rectify the error ,kindly help
ThanksDear Sadanand,
1.Assign the REM profile in the MRP4 view of the material master and REM allowed indicator.
2.Assign the created rate routing and BOM inthe production version and also REM allowed indicator
inside the production version.
3.Rate routing can be created using CA21.
4.Assign the rate routing against detailed planning if you have assigned the routing selection id against
detailed planning in OPU5.Ensure your routing selection id is having the first priority to the rate routing.
5.Production versions can be created and modified using C223 or else using MM02 in MRP4 view.
Check and revert back.
Regards
Mangalraj.S -
I repet : I am not allowed to write another directory than C:\\ when I direct Firefox fon installing.
I want to post Firefox in G:\\, where I have enought space. In C:\\ I just have space for Windows .Please stick with your original thread. Locking this one as a duplicate.
https://support.mozilla.com/en-US/questions/754307 -
Hi, I have tried repetedly to install flash player on my mac mini with no luck..... help please !
How to perform a "clean install" of Flash Player in Mac OS X
-
How i get number of record in repet frame?
Hi,
How i get number of record in repet frame?
Regards
JomarJomar,
you can use Summary Columns in the Data Modell. Create them on group higher that your wished group (so on the pane for an first group of a query), use as Source the primary column and as reset at the group, where the summary column is located.
If you hide some instances via format triggers, that you could use a counter inside the format triggers to count the rows.
Regards
Rainer
Maybe you are looking for
-
Restoring from Time Machine to an external hard drive
I had a hard drive crash on a MBP and am using DiskWarrior to try and recover it. DW has been running for over 48 hourse and says "speed reduced by disk malfunction: 3,177" (the number increases every few minutes) The DW folk tell me to give it an
-
Hi, I am trying to read the "Received" headers for an email that is coming into my inbox. The headers are long and hence getting "folded". For example an email has these 2 headers [besides others]: Received: by 10.54.23.20 with SMTP id 20cs33514wrw;
-
I have a 1st gen iPad. Upgrade to IOS 6.1.1 appeared, but it quit shortly into the installing and has not come back up again. Both the iPad and when synced to the iMac, say i am fully up to date at 5.1.1! Has anyone had / got the same issue? How can
-
Error in code of relative navigation
Hi Experts, I am using relative navigation for the first time. Dont know why i am facing the following error while I am typing the method for relative navigation in the component controller of my project: "The method navigateRelative(String, int, Str
-
I'm adding ad-hoc SQL capabilities for Oracle to my application (the application is a database development tool). Essentially, the user has a text editor that they use to type what ever SQL they want. I need to give them a way to execute it. What the