Description data is not visible in Reports

Hi,
I have master, its description is parted in 2 parts, due to length greater than 60. When I try to see data in report, it does not show description1 for few Materials but description 2 is visible , even description1 is present in Data Target.

Hi,
Is the report based on master data or any other infoprovider like cube/ODS?
Check the report in RSRT also check in LISTCUBE with simialr conditions. If it is there in the data target, and the material is appearing in the report then it should be visible in the report.
Regards,
Ramesh

Similar Messages

  • Query Saying NO Authorization- Data is  not visible in report

    HI All,
    When I ran query no data is coming in the report in quality system. I created a query on multicube , in basic cubes data is there. when I am trying to run a query it is saying no authorization but in Development I am able to see the data in report.Pls can anybody give inputs on this.If any information required pls ask me.
    Shah

    Hi RSS,
    Goto Monitor and check the multicube, if the required fields or data is there.
    Check the transport connectivity.
    Check this,
    Bex- Transport
    Hope this helps!

  • Loaded data not visible for Reporting?

    Hi all,
       In the info cube, the data is not visible for reporting, How can i make it available for reporting,
    When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
    " There is an inconsistency between the load status of the data and the option of reporting on this data.
    There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
    The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
    How do i find out the inconsistancies?
    PS: All the requesta are delta upload
    Thanks n regards
    Girikumar

    Hi Girikumar
    Use the RSRV transaction and check the inconsistency of the cube ..If any inconsistency is there repair that with the repari option in the toolbar..
    Let me knwo if it not resolved..
    Bye
    Shu Moh..

  • New Data is not available in reporting after revrse posting

    Hello All
    I have a cube and data loaded into it.Now i came to know that one request is having wrong data and need to be deleted,without deleting I did reverse posting.Now that particular data(means new data) is not available in reporting.The reporting symbol in request(manage tab) is not available for this request.
    Now what should I do,in order to get new data in reporting.
    regards
    blaji

    sorry i solved it

  • Universe export - data changes not reflecting in Report

    Hi
    The changes and the latest updates in the database are not reflecting in reports,
    even if i export the universe again.
    and i have refreshed the reports, that even not reflecting.
    i did Edit query and Run query  this action also not bringing the latest data to reports
    why this happens ?
    how to solve this issue ?
    Regards
    Dineshkumar

    You can search for KB articles on SAP Service Market Place .
    Here is first :
    Symptom
    You make changes a local Universe in Designer.
    When refreshing the report, in Desktop Intelligence, the results do not reflect Universe update.
    It used to be enough to simply refresh report's data, for Dataprovider to show object changes from the Semantic layer.
    Change of behaviour in SP3 codeline: the DeskI Query Panel does not automatically pick up the latest modifications made to the local Universe.
    Reproducing the Issue
    Using BusinessObjects Desktop Intelligence XIR2 SP3:
    Using your universe (eFashion), create and refresh a simple Desktop Intelligence report (.rep).
    Make a simple change to the universe (like renaming a field/ object name) and save these changes.
    Go back to the open DeskI report and try to refresh the data provider using: 'Data/Refresh Data'.
    This will not show the latest changes.
    However, if you follow the same workflow using XIR2 SP2, the universe update will be immediately visible (in the report) simply after refresh.
    Cause
    This is not a product regression, but intentional change in application's code delivered with FixPack3.1.
    Fix Request ADAPT00818520 changed the application's behaviour: << When a restricted user is logged on to view a Desktop Intelligence document, prompt windows may be slow to open. >>
    Resolution
    In Desktop Intelligence menu, go to:  Tools > Universes
    Click 'Refresh'
    Select and 'Import' your universe
    Next, go to toolbar menu:  Data >  Edit Data Provider
    In Query Panel, click 'Run' to regenerate the Query and interrogate the updated universe.
    Only after following these actions will the .unv ammendments be visible in the report.
    Here is second :
    Symptom
    Changes to object made for the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
    Desktop Intelligence (Deski) Report still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
    Row level Restriction is not applied correctly in InfoView(View Mode) when 'Allow selection of multiple Contexts' checked in the Universe Designer
    Environment
    BusinessObjects Enterprise XI 3.1 Service Pack 2 Fix Pack 2.6
    Reproducing the Issue
    Changes to object made in the Universe is not affected in InfoView(View mode) when 'Allow selection of multiple Contexts' is checked in Universe
    1. Log in to Designer
    i) Import Island Resort Marketing
    ii) Go to Universe Parameter >> SQL
    ii)Uncheck Allow Selection of Multiple Context
    2. Create a new Desktop Intelligence(Deski) Report based on Island Resort Marketing
    i) Drag the object Country in the Result's Pane
    ii) Save and Export the report to the repository.
    3. In Designer Change the Object Country under Resort from Resort_Country.country to
    i) Resort_Country.country+'ddd'
    Note: Uncheck Allow Selection of Multiple Context
    ii) Save and Export the Universe
    4. Log in to InfoView
    i) View the report
    ii) Refresh the report
    iii) Changes to the object taken place i.e Country is concatenated with ddd
    5. In the Universe Designer, change the Object Country under Resort from Resort_Country.country to
    i) Resort_Country.country+'eee'
    Note: Check Allow Selection of Multiple Context
    ii) Save and Export the Universe
    6. Log out from InfoView and login again
    i) View the report
    ii) Refresh the report
    iii) Changes not taken place. Shows only Country instead of Country concatenated with eee.
    Row level Restriction is not applied correctly in InfoView(view Mode) when 'Allow selection of multiple Contexts' checked for the Universe.
    Import efashion Universe 
    Drag the Outlet_Lookup table into the objects pane on the left hand side
    Create Row Level Restriction on the state field of Outlet_Lookup table as Outlet_Lookup.State=(u2018Texasu2019) 
    Apply the restriction to Administrator
    Save and Export the Universe. Note: Uncheck Allow Selection of Multiple Context in Universe Parameter>>SQL
    Log in to Desktop Intelligence (Deski) as administrator with Enterprise Authentication
    Create a new Deski report
    Drag the object state from the Outlet_Lookup table to the Results pane 
    Observed that the administrator is able to see only Texas which is expected behavior
    Save and export the report
    Log in to Infoview as Administrator
    View the report. Refresh the report
    Observed that the administrator is able to see only Texas which is expected behavior
    Log in to Infoview as any user say Test User
    View the report. Refresh the report
    Observed that Test User is able to see all the states which is expected behavior
    In the Universe Designer, Check Allow Selection of Multiple Context in Universe Parameter>>SQL for efashion Universe
    Save and export the Universe
    Log in to Infoview as Test user
    View the report
    Refresh the Report
    TestUser is  able to see only Texas which mean that the restriction is applied to Test User also
    Cause
    This is by Design as the  'Allow selection of multiple Contexts' forces selection of the context, which is not possible in Infoview, so that in Infoview it is assumed the Context is already selected and no SQL regeneration is required.
    Resolution
    Problem Description: Changes to object made in the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
    Explanation:
    If we modify an object and selects also the option 'Allow selection of multiple Contexts', it means that potentially there is more than one SQL that can be generated with the use of that object. Hence if a report is created in Deski, run and exported to enterprise, that means, one particular context (SQL) has been selected.
    If you then update one or more of the objects again, the SQL will have to be regenerated in Deski for the right context to be selected for that particular report.
    Therefore, if this option is used, for the objects to be updated, the SQL of the report will have to be regenerated in Deski, run and export it back to repository, then refresh the report in InfoView.
    For Deski reports viewed in InfoView, it is not possible to evaluate the context on refresh. The report will always use the context stored with the report and same for the SQL. Therefore the Deski report will need to be imported locally, refresh it and then export it back to repository for the changes to take place.
    Problem description: Desktop Intelligence (Deski) still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
    Explanation:
    The option 'Allow selection of Multiple Contexts' in Designer is not to disable the prompt. It will prompt you to select context if the object used is associated with context. The option is just to allow Deski to select multiple contexts at a time if in case the object used is associated with multiple contexts and accordingly generates the SQL.
    However if we uncheck the option even if there are multiple contexts associated with the object used, it will allow selection of only one context at a time.
    Problem Description: Issue with Row level Restriction when refreshed from InfoView with 'Allow selection of multiple Contexts' checked for the Universe.
    Explanation:
    We first have to regenerate the SQL in Deski, then export it to repository and refresh from InfoView for the changes to take place correctly. The explanation above applies.

  • Hierarchy in properties of characteristics item is not visible in report

    Hi,
    It has been observed that the Hierarchy name in u201Cproperties of characteristics" of an infoobject for example 0GL_ACCOUNT is not visible in BEx output report. The report shows complete hierarchy with all nodes / subnodes but NOT HEADER description!
    Also whenever you change the hierarchy (by changing global / local view), Same problem exist.
    This is one of the high priority problem users are facing since they canu2019t see hierarchy name (Key / Text) causing confusion.
    Please advice.
    Thanks and best regards
    Rajendra

    Make a duplicate header above all the levels and show text in the BEx output
    Level 1 -> Hierarchy name -> Level 2 ( Initially Level 1) -> Level 3 ( Initially Level 2)

  • BIP 11.1.1.7 - Stacked Bar chart data label not visible in pdf

    Hi all,
    I have a report built with the online editor. This contains a stacked bar chart with percentage values in a repeating section and I made the property DataVisible=true.
    When I view the report in interactive mode it all works: I can see the data label for every value of the parameter but when I view in any other format (PDF, PPT, ecc..) the data labels are visible in the first chart (for the first value of the parameter) while in the other charts they aren't. This doesn't happens for other types of chart, for example with a pie chart.
    Can someone help me or tell if it is a bug?
    Thanks,
    Micaela

    Hi Mitalee,
    Would you please check the PAM at https://websmp108.sap-ag.de/~sapidb/012002523100018972812014E
    On page 11 it says 64 bit IE11 is not supported; is your IE11 32 bit or 64 bit?

  • Text data is not displaying at Report level for an Infoobject Item name

    Hi All,
    Texts data is maintained at Info object level but text information is not displaying at Report level for an object.  I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information.  This problem occured in QA(Quality) system but not replicated in Production system.  I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
    Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend.  In production it is displaying textal data for the IO.
    Thanks in advance.

    Hi All,
    Thanks for your valuable information.  I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
    In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
    As per my understanding might be the issue with Patches will be checking with Basis team on the same.
    Please suggest if you have any alternatives to fix the issue.

  • Data is not showingh in report

    hi experts
                      in my report , i have taken timein & time out as a key figure while query output data is not showing , it s showing blank , i didn't use any calculate kf r formula ,one think also can i ask , through this i want to calculate a present and absent date for empolyee , can u give me any logic
    plz help me
    ill assign a point
    shalini

    Hi Shalini,
    In the case it would be diff. of intime and out time using fm in the udpate rules..(presuming info object is added into data target)
    Hope i am making a point clear.
    Hope that helps.
    Regards
    Mr Kapadia
    ***Assigning points is the way to say thanks in SDN.***

  • Data is not available in report

    Hi Experts,
    i have purchase order report created on multiprovider.
    Particular vender number data not showing in report but its available in Data target.
    suggest possible cusses?

    Hi Raj
    Check if you have any additional restrictions in the report which are filtering out the vendor numbers.
    If you are using a master data object make sure the master data is activated.
    Also check the assignment for the vendor infoobject in the data target/multiprovider.
    Regards,
    Ninad

  • New objects not visible in report objectpicker

    Hi, I'm new to SCOM so please forgive me if I say something wrong.
    We are using SCOM 2007 R2.
    In Operations Console I've created 2 new Web Applications in Authoring view.
    In Reporting view I open  Availability report from Microsoft Generic Report Library
    Click Add Object
    Search for Web Application I've created and get nothing
    For some reason I see only old objects when search or view all available in report. I tried to use old Management Package and created my own (I thought the problem was in sealed MP, but my new is unsealed). Found similar problem in "Missing Objects
    in Report Objectpicke" question,  but we have less than 100 monitoring agents.
    So I have no idea why objects are not visible, could you please help?

    Verify from Group {contain all computers that you want} that using in Reporting.
    You also check below link, it's similar issue
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/5cb0fb12-73c5-4553-987f-ea415babd876/missing-objects-in-report-objectpicker?forum=operationsmanagerreporting
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Date Types not visible in CRM Service Request

    Dear Friends,
    I am implementing Service Requests in CRM 7.0 in our project
    I have configured the Date Types and assigned them to the Date profile
    The Date profile i have assigned it to the Transaction Type
    But when creating the new Service Request Transaction Type the dates are not appearing
    Can you help me by directing me to any missing config
    Regards,
    Raj

    Hi,
    check if you have set the screen assignments in the date profile. When you assign the date type, in the left navigation area, one level below, you have to set the visibility of the date type.
    Regards, Toine

  • Data points not visible on xy chart

    I am trying create an xy chart (a scatter plot) in staroffice (.sxc) using two sets of data:
    Data 1:
    -0.15
    -0.1
    0.04
    0
    -0.1
    0.18
    -0.05
    0.08
    0
    Data 2:
    5
    50
    80
    70
    80
    80
    50
    90
    80
    After having selected my data, axis specifications, etc, when I click "create" , the chart is created, but no data points are visible. I have created another chart with different data where the data points are visible
    I have not modified the axes scale.
    The data points will display on any other type of chart except the scatter plot, which is the one I need. Has anybody experienced this problem/know how to deal with it?

    Where, for example, the first point is (-0.15, 5) where -0.15 in Data 1 is equivalent to 5 in Data 2

  • Power View Created Using Excel Data are not visible in BI Docs

    I have created a Excel sheet with data and Then I added a Power View for that data set. I added this Excel Sheet to the Power BI Docs in Office 365 share-point Online. But when I open this uploaded Excel file.
    There is only the Datasheet but no pages of Power Views of that data. How can I make this power Views visible in the Excel sheet.
    Thanks
     

    Normally, when you open an excel file, using excel online, (not on phone or tablette, just by using your laptop) the report will appear correctly.
    I was in your case when i didn't have right access in Power BI in Office 365, so make sure that your account have right access in Power BI in Office 365. (you can talk to the administrator of Office 365 for more information).

  • Custom Data Provider Not Registered in Report Server (Sql Server 2012)

    We have a simple test report project set up and can preview the reports with no errors or problems from the designer. We can deploy the report project, but when trying to view the reports from the browser, we get the following error:
    An error as occurred during report processing, (rsProcessingAborted)
    An attempt has been made to use a data extension 'LiMeDAS' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
    I have followed this article that explained how to register a data provider extension:
    https://msdn.microsoft.com/en-ca/library/bb326409.aspx
    I have placed the assemblies in:
    C:\Program Files\Microsoft SQL Server\MSRS11.LIMEDAS\Reporting Services\ReportServer\bin
    Added the following line to the rsreportserver config file (inside the <extensions><data> tags)
    <Extension Name="LiMeDAS" Type="Limedas.Data.Provider.LimedasConnection,Limedas.Data.Provider"/>
    and finally added the following to the rssrvpolicy config file (inside the top level CodeGroup tag):
    <CodeGroup class="UnionCodeGroup" version="1" PermissionSetName="FullTrust" Name="LiMeDASDataProviderCodeGroup" Description="Grants permission to the LiMeDAS data processing extension for reporting services.">
                  <IMembershipCondition class="UrlMembershipCondition" version="1" Url="C:\Program Files\Microsoft SQL Server\MSRS11.LIMEDAS\Reporting Services\ReportServer\bin\Limedas.Data.Provider.dll"
    />
                </CodeGroup> 
    We have the data extension set up perfectly for the designer, because I can see it as a type of connection and the preview works in the designer.
    But, for some reason it does not work in the server. They were set up the same way, but the server will not work. From the report manager page, when we try to add a data source, the only type option is Sql Server, none of the other extensions mentioned in
    the config file. Does anyone know what else could cause this issue? 

    Hi Justin,
    According to the error message and the issue can be caused by the edition of your SSRS is not support for the custom data provider. For example the express edition have limitation support on this:
    Features Supported by the Editions of SQL Server 2012 .
    If your edition is the supportted edition and the issue can be caused by the custom data provider do not necessarily support all the functionality supplied by Reporting Services data processing extensions. In addition, some OLE DB data providers and ODBC
    drivers can be used to author and preview reports, but are not designed to support reports published on a report server. For example, the Microsoft OLE DB Provider for Jet is not supported on the report server. For more information, see
    Data Processing Extensions and .NET Framework Data Providers (SSRS).
    If you are running on a 32-bit platform, the data provider must be compiled for a 32-bit platform. If you are running on a 64-bit platform, the data provider must be compiled for the 64-bit platform. You cannot use a 32-bit data provider wrapped with 64-bit
    interfaces on a 64 bit platform.
    More details information:Data Sources Supported by Reporting Services (SSRS)
    Similar thread for your reference：
    ERROR: An attempt has been made to use a data extension 'SQL' that is not registered for
    this report server.
    Error when viewing SSRS report with SQL Azure as data source
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

Maybe you are looking for