Description field in Account Analysis report
There is a seeded report Account Analysis 132 Char in General
Ledger. This report has a column called "Description" which
takes the value of je lines description field. But in the
report this field is truncated to 11 characters. Is there any
easy way to expand this field (in the report) to show the full description?
Thanks in advance for any help.
-MS
Please friend...share knowledge on this...
Similar Messages
-
Not getting Line Description in Account Analysis Report
Hi Friends,
There is requirement to get line description for account analysis report...
Source - Cost Management
Category - Receiving
Event Type - Receipt into Receiving
I have done required setup(Application Accounting Definition) to get the line description .I am getting line description for Debit transaction but for the same source and event type i am not getting line description for credit transactions..
Is there any way to get line description for Credit transaction.
Please suggest...Please friend...share knowledge on this...
-
Urgent Clarification seeking on R12 Account Analysis Report
Hi Guys
I have an urgent requirement regarding R12 Account Analysis Report.
As per Metalink Doc ID : R12 GL Standard Reports Do Not Display Source And Line Item Data [ID 836847.1] ..Account Analysis report in R12 application does not display any value for Source/Line item column as data in gl_je_lines reference columns are not available.
Do we have any replacement report or any other way to get this info in R12 since it was available in 11i. It is creating lot of problem for reconciling the AP/GL
It will be good if you can reply ASAP.
Thanks
AjeeshHi
I believe you can modify the standard account analysis template (RTF using the responsibility "XML Publisher") and include the field for source. This field is available as a standard XML tag in the report. This is a very little effort and can be done quite easily.
Hope this helps. Let me know if you need any clarity in this respect.
Vinit -
GL Account analysis report with ALV Grid control
Hi Everyone,
I am looking for a GL Account analysis report with ALV Grid Control.
Can I get sample code for this report.
Thank you
PrasadHi Rob,
Actually, I am searching for a Report which gives GL account analysis.
If anybody can throw more light on this ...it would be great.
Which Tables and fields i should refer for this report.
Thanks -
Adding Data Field to Sales Analysis Report
Does anyone know how to add data fields to Sales Analysis Reports, either in PLD or CR? On Sales Analysis by Customer, I need to add the total quantities for all items sold for the sales included in the report, excluding negative quantities.
Thank you,
AvrahamHi Avraham.......
You can create your own Query Report for getting all the desired outputs and it will be easy to show in reports also.....
Regards,
Rahul -
How to add two new paramater to the Account Analysis report
Hi All,
I was working in Oracle Apps R12.1.2.
Now i need to customize Account analysis report.
Now i need to add two new parameter namely Party_name and party_site_name. So now instead of creating new parameter i have used the P_Custom_parameters namely 1 & 2.
I have searched and found that they have used in this party_name concept only in this part only
p_party_columns :=
',CASE
WHEN ael.party_type_code = ''S'' THEN
(SELECT aps.segment1
||''|''||aps.vendor_name
||''|''||hzp.jgzz_fiscal_code
||''|''||hzp.tax_reference
||''|''||hps.party_site_number
||''|''||hps.party_site_name
||''|''||NULL
FROM ap_suppliers aps
,ap_supplier_sites_all apss
,hz_parties hzp
,hz_party_sites hps
,xla_ae_lines ael2
WHERE aps.vendor_id = ael2.party_id
AND hzp.party_id = aps.party_id
AND apss.vendor_site_id(+) = ael2.party_site_id
AND hps.party_site_id(+) = apss.party_site_id
AND ael2.application_id = ael.application_id
AND ael2.ae_header_id = ael.ae_header_id
AND ael2.ae_line_num = ael.ae_line_num
AND aps.vendor_name = :P_CUSTOM_PARAMETER_1
AND hps.party_site_name = :P_CUSTOM_PARAMETER_2)
WHEN ( ael.party_type_code = ''C'' AND ael.party_id is not null ) THEN
(SELECT hca.account_number
||''|''||hzp.party_name
||''|''||hzp.jgzz_fiscal_code
||''|''||hzp.tax_reference
||''|''||hps.party_site_number
||''|''||hps.party_site_name
||''|''||hzcu.tax_reference
FROM hz_cust_accounts hca
,hz_cust_acct_sites_all hcas
,hz_cust_site_uses_all hzcu
,hz_parties hzp
,hz_party_sites hps
,xla_ae_lines ael2
WHERE hca.cust_account_id = ael2.party_id
AND hzp.party_id = hca.party_id
AND hzcu.site_use_id(+) = ael2.party_site_id
AND hcas.cust_acct_site_id(+) = hzcu.cust_acct_site_id
AND hps.party_site_id(+) = hcas.party_site_id
AND ael2.application_id = ael.application_id
AND ael2.ae_header_id = ael.ae_header_id
AND ael2.ae_line_num = ael.ae_line_num
AND hzp.party_name = :P_CUSTOM_PARAMETER_1
AND hps.party_site_name = :P_CUSTOM_PARAMETER_2)
ELSE
NULL
END ';
But now when i ran with a specific parameter its running for all party name.
Can any one pls guide me how to achieve this
Thanks & Regards
Srikkanth
Edited by: Srikkanth.M on Oct 20, 2011 5:23 PMsolved
-
In the Account Analysis Report Payables, currency precissions are not refle
Hi All,
In the Account Analysis Report Payables, currency precissions are not reflected propely.
The functional currency is KWD (Precission - 3). In the standard report (Account Analsyis Report) parables application, the output is shown in 2 decimals. The output should be shown in 3 precisions.
Regards,
Raju.Some how the rtf (XLAAAR01) is not looking at the currency precision.
You may customize the rtf.
By
Vamsi -
How can i Add two parameters to Account Analysis Report R12?
Please i need to add two parameters Vendor Name & Currency to Account Analysis Report?
Dear Helios
1- I added the two parameters through navigating to concurrent ->Program - > Define
2 - Modifiy XLAAARPT.xml (Adding paramters and modify the query)
is this correct?
Regards,
Edited by: user565050 on Sep 6, 2012 1:17 AM -
Payables Account Analysis report takes long time to produce xml output
Hi,
I am trying to get xml data for the Payables Account Analysis report. I have changed the output format of the concurrent program to XML.
The report takes long time to produce the xml data irrespective of the number of rows fetched. But the same report with Text output runs very fast.
Any reason why the xml output takes long time?
thanks in advance
Malathi.Hi,
Thanks for the reply.
As mentioned above, i deleted the Q_FLEXDATA and ran the report. it takes less time.
But Will the report data not affected when we delete Q_FLEXDATA Group? and Why this flexdata group affects the running time?
Thanks,
Malathi. -
Difference B/W Account Analysis - (180 Char) and Account Analysis report
Hi Experts,
Can anybody expalin me the difference between "Account Analysis - (180 Char)" Report of General Ledger Application and "Account Analysis Report" of SubLedger Accounting Application.Can we compare both the reports in R12? Does both the reports gives us equal Results in R12?
Please explain me the exact difference between these reports.
Thanks in Advance,
RS981194 wrote:
Hii,
Please help me , what is the alternative report in R12 for Account Analysis – Sub ledger Detail (180 Char)Please see this
its Obsoleted in R12
EBS R12: Financial Reports impacted by the R12 (12.0 and 12.1) Upgrade [ID 1110684.1]
R12: Are Account Analysis Subledger Detail Reports Available In R12? Are there obsoleted reports? [ID 464233.1]
;) AppsmAsti ;)
Sharing is Caring -
EBS R12 (12.1.3) GL Account Analysis Report
Experts
My apologies before I ask my question - I am normally supporting HR.
Regarding the Account Analysis Report in GL - there is a 'From' and 'To' date parameter, my users report that they believe they had previously been able to run with 'From' and 'To' crossing fiscal years. They are not finding that possible now.
What is the expected functionality??
regards
TomCan you find any errors in Apache log files?
Please see these docs.
Login to EBS in OAM 11g Integrated Environment Fails With OAM Error "System error. Please re-try your action". [ID 1457176.1]
Error Logging To a Migrated SSO 10g Midtier On OAM 11.1.1.5.0 Bp2 [ID 1450682.1]
Migrating Oracle Single Sign-On 10gR3 (10.1.4.3) to Oracle Access Manager 11gR1 (11.1.1.3.x) with Oracle E-Business Suite [ID 1336337.1]
Thanks,
Hussein -
Add PO Number to Account Analysis Report in R12
Hi Guys,
I have a requirement to Add PO Number to Account Analysis report under sub ledger Accounting application in R12.
Could you please help, if this requirement is feasible and what are the joins require for it.
As per my knowledge it goes like xla_transactions-> AP_invoices_all then to PO_headers_all.
Is there any other alternative for this.
Quick response will highly be appreciated.
ThanksYou can't go from ap_invoices_all to po_headers_all.
You will have to go from ap_invoice_distributions_all to po_distributions_all using the po_distribution_id.
And remember to perform an outer join because for some invoice distributions, you may not have a po.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant -
Adding New Parameters for Account Analysis Report
My requirement is to customize the Account Analysis report and need to add two parameters(PO Number And Item).In the Dev Instance I have done by creating the customizing package instead of XLA_ACCT_ANALYSIS_RPT_PKG to some xxxx_pkg used in the XLAAARPT.xml file.But when i am doing this in Production the user does not have access to the Packages he has only access for tables and synonyms.I am unable to create the customize package is there any other way to decalre and use parameters in XLAAARPT.xml file.
If there is any possibility please provide me the solution as soon as possible.
Thanks in advanceHi
Did you customize the Account Analysis Report? I need to add new columns PO NUmber and Item # . COuld you please let me know how can I get those columns to display in the report? I mean the joins to the tables. -
Payable Account analysis report
Hi All,
Payables Account Analysis Report for 10.1000.1000 which is the account that is billed when we charge our customers freight on an order. Most orders have freight in the “charges” section in order entry, however, I do not see the items showing up on this account on the analysis report. Please advise as to what GL account the freight charges on invoices are charted to. I need to know what charges we billed for freight from Feb 1 2008 to Jan 31 2009.
Thanks,
Redro.Any Suggestions?
Thanks,
Prakash. -
Account Analysis report (Modification adding Customer)
Dear All,
I just want to know is there any way to Modify Account Analysis Report (Subledger) modified by adding Supplier Name.
Thanks
RehanHi Rehan;
Please check below which could be helpful for your issue:
XLAAARPT: Account Analysis Report Errors with Warning: Due to High Volume Of Data Got Out Of Memory Exception Please Retry With Scalable Option Or Modify The Data Template To Run In Scalable Mode [ID 1304660.1]
Regard
Helios
Maybe you are looking for
-
I also have a few add-ons that aren't compatible with my current version of Firefox, and they say they will be un-installed when Firefox restarts, but they still stay on the add-ons list.
-
How do I add microsoft 7 to my ipad, how do I add microsoft 7 to my ipad
I intend using my ipad at school completing papers and other homework. How do I add microsoft 7
-
We have a WD external harddrive previously used with a PC that we want to completely erase and reformat for use with our iMac desktop for use with Time Machine. The drive shows up on the desktop of the Mac, but it does not show up in Disk Utlity, as
-
"500 Internal Server Error" recieved.
hello. I've installed solution manager 4.0 and dedicated this server as our central SLD. It was configured and working fine until our consultant patched it from SP 9 to 11. In the beginning, dispatcher and server would come up but none of applicati
-
BPC10 / BPC7.5 NW: the use of US ellimination business rule for matrix elim
In tryuing to make the US Elim business rule work: - Can the US elim procedure support the elimination between an entity and intco AND a segment and partner segment in the same app ? So basically the need is to eliminate intercompany transactions