'Description Field' - only shows in Contract Screen not Quotation Screen

Hi All,
I am in the process of creating some functionality where an Opportunity is created in CRM, then Quotations are created from these Opportunities... The winning Quotation is released through to R/3 and then a Contract is created from that Quotation.  My problem is:
When the Opp is created the user adds a 'Description', when the Quotation is created the Description is still in the header data, once the Quotation is released into r/3 the Description is there at table level but not on screen anywhere - whereas when I create the Contract the field (albiet noit populated) is on the screen...
My question is - How do you get the DESCRIPTION field in the Quotation Screen VA21-VA23 - they seem to be using the same screen number as VA41-VA43
Pls help
Regards
Barry

Hi Barry,
May i know how you solve the above issue?
I need description field to be show on my Sales order screen as well..
Could you advise that how you solve the issue.
Thanks

Similar Messages

  • My ipad is freez...it only show a home screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds and see if you can get it to reboot.

  • My ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.plz help me.................thx u

    Option 1
    Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You need to be patient and repeat the above many times to recover your iPad

  • Add description fields to the demand simulation screen on CTM

    Dear SAP Gurus,
    We have a requirement to add the description fields to the demand simulation screen inside the CTM, do you know how to do this? The description fields are not available in the standard layout, I couldn´t find  any exit or BADI to insert more fields on the screen.
    Do you have any suggestion?
    Thanks and BR
    Mauricio

    Thanks for your reply
    BADI - UKM_BP_ADD_FIELDS
    Documentation of this BADI shows as follows...
    With this BAdI, you can define additional business partner attributes that you define in a business partner master record and want to use as fields in the formula editor.
    To use the new fields, implement the BAdI: Formula Parameters and Functions (UKM_EV_FORMULA)
    Methods of this BAdI:
    FILL_FIELDS
    To provide additional fields for the formula editor
    FILL_ADD_INFOS and SAVE_ADD_INFOS
    To define additional information for the following data in table form:
    Collateral
    Negative event
    Check exceptions
    Credit insurance
    I enhanced the structure(UKM_S_BP_CUSTOMER_EXTENSION) with new custom fields from the badi UKM_BP_ADD_FIELDS but there is documentation for creating the new screen to place those new fileds i created on transaction UKM_BP.
    I have looked at BDT Business data toolset
    http://help.sap.com/saphelp_crm50/helpdata/en/2f/696d360856e808e10000009b38f839/frameset.htm
    but i didn't get any idea ...
    Can you please elaborate and let me know how to do this for my requirement?
    Thanks
    Govi

  • I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Turning it on then off doesn't help.

    I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Home button and turning the phone off then on doesn't seem to do anything.

    Thanks Lucas,
    I've tried doing that with no results. Same screen keeps showing. Maybe it'd be more helpful if I told you a bit more info.  My phone was randomly playing music, and the voice control would also suddenly start without me touching the phone.  Then I let the battery die and started to recharge when on the screen it indicated to plug into my computer/iTunes, I tried to restore but was getting an error message (can't remember what it said now). Battery died and now my current issue of the black screen with white apple.  I'd love to be able to restore my phone but now its not showing as a device on my iTunes. HELP! Any other suggestions?

  • The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.

    The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.  When I open the app the screen is just blank. As it is a default app I can't delete and reinstall. Anybody else experience this?

    Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
    If that doesn't work then try closing the Videos app via the taskbar : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My Iphone is stuck at the "connect to Itunes" screen and in Itunes itself it only shows a blank screen.

    While fully restoring my Iphone it is stuck at the "connect to Itunes" screen and in Itunes itself it only shows a blank screen.
    I already tried different computers and tried a DFU firmware restore. My iphone is not jailbroken or some.
    It does just have a new screen due the fact it was broken.
    Sometimes Itunes says my iphone is damaged, sometimes it only shows a blank screen.
    But whatever I do, I cant go around the "connect to Itunes" screen.
    Anyone any suggestions? please help.

    Did you find a solution?
    My touch is doing the same thing.

  • With last update to aperture  photos only show in photos and not in folders. Any idea?

    With latest update my photos are only showing in photos and not individual projects. Though when I mouse over project it gives me number of photos? Any ideas?

    Do you have a filter enabled? Anything other than Showing All in the search field?

  • The URL field only shows "index.html"

    My org website is working okay, just a simple html site with javascript buttons and a more technical search function on the way. However, throughout the website, that is, whether a visitor is on the "Home" screen, or the "Hope & Help" screen, or the "Professionals" screen (etc.), the URL field only shows "index.html" -- clearly I must have made a mistake when I set up the new site, but where? What do I need to look at, and what do I need to do to correct the glitch? Please view the .org at:
    http://www.al-anon.alateen.org/australia
    Thank you!

    It's because you're using frames when there's no reason to.
    Each content page is actually a separate webpage inside the parent frame.
    The easiest way to resolve this would be to re-build the site using a pre-made template inside Dreamweaver then cut and paste the content into the various pages.

  • My IPOD touch got wet and now only shows a white screen.  How to fix?

    My IPOD touch got wet (it was not submerged in water, just rained on) and now only shows a white screen.  How can I fix this?  I already dried it in rice, and reinstalled it on ITUNES.

    unless you have apple care which even that probably doesnt cover water damage. youre gonna need to buy a new screen. probably set you back $60 something. look up ipod touch 4g lcd screen in google and look for sites like amazon or something. unless you wanna have apple charge you like 100 bucks for it or probably more

  • I am having a minor problem to my iphone. It crashed and when i tried to restore it, its only showing the home screen without any icons whatsoever. How can i fix this issue?

    my iphone crashed and isn't showing any icons or apps. Its only showing the home screen. How can I fix or resolve it.

    Restore your iphone
    If you can't update or restore your iPhone, iPad, or iPod touch

  • Skype Video Calling only showing a black screen

    Hi,
    When I make a viseo call, my computer only shows a black screen. The other person can see me just fine, but my video show just a blank screen. It's definitely a problem on my computer as it has happened with a couple of different people. 
    Both screens that should be showing video (the one that shows them, and the one that shows me) are showing black.
    I've had a look around but haven't been able to find any solutions. 
    Any help would be much appreciated.
    thanks
    Solved!
    Go to Solution.

    Most likely the issue is with your display adapter.
    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

  • My ipod only shows a black screen and an apple logo

    My ipod only shows a black screen and an apple logo. It wont connect to iTunes, and charging doen't work. HELP PLEASE!

    Try a reset. Hold the home and power buttons at the same time until the screen goes dark for a moment, then the Apple boot logo should reappear. If it doesn't work, it's broken, take it to the Apple store or another authorized repair service.

  • MY COMPUTER ONLY SHOWS A BLACK SCREEN, WITH ONLY THE POP UP SHOWING .....VIEW AND TRACK YOUR DOWNLOADS

    MY COMPUTER ONLY SHOWS A BLACK SCREEN, WITH ONLY THE POP UP SHOWING .....VIEW AND TRACK YOUR DOWNLOADS

    Hi,
    First plaese unplug any external device (except the mouse and keyboard), then hold on the power button, perform a cold reboot, what is the result?
    If doesn't work, please press F8 (or other button, depend on your PC model) boot your compute into recovery console.
    You can restore your system to a previous point or perform a startup repair, please refer to the following link:
    What to do if Windows won't start correctly
    http://windows.microsoft.com/en-in/windows-vista/what-to-do-if-windows-wont-start-correctly
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for

  • How to clear the screen in the command prompt?

    Hello Everyone, I was wondering how we can clear the screen in the command prompt in Java. I remember we can do this in C by writing system("cls"); What is the best IDE for writing Java programs. Is the NetBeans IDE good? Thank you very much.

  • CQL SELECT clause syntax

    Hi all I have a small question regarding the SELECT clause syntax. In my CEP application I'm processing events which hold several properties, mostly primitives, but a few of type java.awt.Point. I can select the Point object itself in the SELECT clau

  • Change network parameter using ndd permenantly

    Hi all, Need to set the "udp_xmit_hiwat" and "udp_recv_hiwat" to 65536 as the default is only 8192 this is required by the Oracle RAC, using the "ndd" command will change the value but upon reboot the changes are lost. I can change using the "rc" scr

  • Spry with Dreamweaver download problem

    but I can not find the application... The folders in the Spry_P1_3_08_11 folders are: the folders are articles data demos includes samples widgets... where is the application? Betsy Wallace

  • Why isnt my ipod nano recognised by itunes?

    my ipod nano 6th generation used to sync fine, but now I get a message on itunes saying its not recognised