Description not coming for a Char in the cube

Hello All,
I have recently enhanced a standerd data source. I have created a new info object and map the new field in the data source.
Now my problem is althogh the valus for the new field is matching with source , but the vulues are coming in short forms.
Like in source tha value is DATENS but here in BW its coming as DE. The values are coming in short form.
I have checked the length of new Info Obj and its much more so no problem with length.
Do I have to do a text load?
I have added the new IO to info provider only which is getting populated through transaction data.
Thanks and Regards
Sunny

Hello all,
I found that in my enhancement , in the code I had a type declaration which is of two character. This caused the value in the added field to be of two char/
Thanks for the information
Sunny

Similar Messages

Pop up screen not coming for import PO at the time of MIGO

Hi,
I am doing Migo for import PO and not getting Pop-up screen to put commercial IV no., while MIRO is done for custom duties, Pls help me out and tell me the settings related to the same.

Hi,
Follows as below in case of Import procurement.
Step 1)
Maintain J1ID check with following details
1. Material Chapter id Combination & Material Type as well.
2. Maintain Cenvat determination Input & Out put Material.
3. Vendor Excise Details - Excise indicator for vendor 1
4. Plant - Excise indicator for Plant 1
Step 2) Create PO.
Maintain all the condition manually in PO
Such as Custom duty 10%, Edu cess on Custom 2%, SHE cess on Custom 1%, BED equivalent to CVD 10%, Edu cess on CVD 2% and SHE cesson on CVD 1%, AED 4%.
Then in PO assign local vendor for these condition
Step 3) Do MIRO and select planned delivery cost in the selection on MIRO screen & Post the MIRO/ Custom invoice.
Step 4)
Capture Excise invoice with reference to custom / commercial invoice system automatically pops up the window to enter the commercial invoice.
Step 5)
Perform GR during GR system Pops up the window to enter the commercial invoice. There you can enter thsame.
Rg

I have an iphone4 and that I have had for four years and they are saying that I am not eligible for an upgrade until the end of July 2015. That is four years and 3 months after I purchased this phone. "Customer service" said I had an upgrade at the end of

I have an iphone4 and that I have had for four years and they are saying that I am not eligible for an upgrade until the end of July 2015. That is four years and 3 months after I purchased this phone. "Customer service" said I had an upgrade at the end of July 2013, which I did not. She said that in the system my husband took an upgrade July 29th 2013. He didn't even have a Verizon phone, he had a work phone with T-mobile. I have asked what device he supposedly upgraded to since no phones have been activated and we all still have our same phones and numbers. Remember at the time, said husband had a work phone with T-mobile. I still have the very same phone as do all of the rest of my family members. No one has upgraded. I spoke with "customer service" for more than a half an hour today, Char promised me that her supervisor (Emily) would call me back by 7:30 tonight to clear up this problem. Well guess what? No call back so where should I go from here? Any advice or help would be greatly appreciated. Thank you for your help.

someone swapped upgrades. Phone could have been sold For quick cash.

When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa

I am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??

am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??

The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........

Serial Number Not Valid- new Windows 7pro/ fresh install of Creative Suite 5 Design Premium Win from download will not accept license key. This serial number is not valid for this product is the only response.

Serial Number Not Valid- new Windows 7pro workstation / fresh install of Creative Suite 5 Design Premium Win from download will not accept license key to install. This serial number is not valid for this product is the only response being returned. What am I missing?

The key is for Creative Suite 5 Design Premium the download is DesignPremium_CS5_5_LS1 and all associated files in the group.

Workflow mail not triggering for PO's to the Manager

Dear Seniors,
I am creating a PO and keeping in hold and later on saving the PO. But for those kind of PO's, the manager is not getting the mail for approval. But if i create a PO without keeping in hold with same data, system is triggering the mail to the manager. Why is it so? how can i make the settings to trigger the mail for hold-saved PO's. Please guide me.
Regards,
Prasath J

Hello Prasath,
Please check your configuration on ERP/ECC
side in transaction SWETYPV. Here you can enable or disable the
event type linkage for BUS2012 and for CL_SE_PUR_PO_WF_OUT or any
customer-specific business object related to Purchase Orders which might
be in use. If you disable the event linkage for CREATE and/or change
event, no message will be triggered upon PO creation.
If this is not sufficient for your business process the usual logic is
that all Purchase Order message are being sent out when the event
linkage is active (e.g. you want to send out only some of the message
types possible). In this case you might want to make use of BAdI
PUR_SE_PO_INTERFACE_OUT_SELECT (enhancement spot / BAdI)."
Enhancement Spot: PUR_SPOT_SE_PURCHASE_ORDER
BAdI Definition: PUR_SE_PO_INTERFACE_OUT_SELECT
Interface:        IF_PUR_SE_PO_IF_OUT_SELECT
BADI definition   PUR_APPL_SE_POCONF_IN_ASYN
Also in the standard, for the following messages
   PurchaseOrderChangedInformation_Out
   PurchaseOrderERPRequest_Out_V1
   PurchaseOrderERPConfirmation_Out
we are sending out these information as soon as a purchase Order is
created. We do not distinguish between the services all of them will be
triggered.
Hope this hepls
Ray

My icloud mail has not worked for 2 days. the tech support people say they dont even know there is a problem.

My mail has not worked for two days - in the US. The tech support people on the phone claim they don't even know there is a proplem. Anyone know whats going on?

http://www.apple.com/support/icloud/systemstatus/
People reading this forum are just other users like you (who frankly already know there are a lot of frustrated users out there and cannot tell you anything you won't see in the above link). Send your feedback to http://www.apple.com/feedback/icloud.html

TS2753 I have ipad 3 iOS 7.1 last update when connect to my macbook osx 10.8.5 get the following error "iTunes could not check for an update to the carrier settings for your iPad A unkown error occurred 1651"

I have ipad 3 iOS 7.1 last update when connect to my macbook osx 10.8.5 get the following error "iTunes could not check for an update to the carrier settings for your iPad A unkown error occurred 1651"
any help please

If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa

Good Morning, this morning I received the following error message when the iPhone connected to iTunes: itunes could not check for an update to the carrier settings for your iphone. an unknown error occurred (1635) iphone 3gs with IOS 5. any ideas? thx

Hello,
this morning I received the following error message when the iPhone connected to iTunes: i
tunes could not check for an update to the carrier settings for your iphone. an unknown error occurred (1635)
any ideas? thx

I get the same error (although in Dutch ;-)).
It also says something like (I'm translating): "Make sure your network settings are correct and your networkconnection is active or try again later." Is there a way to find out these "correct networksettings"?
I now get it for a week, eacht time I connect my iPhone to itunes...

Build Plugin IS NOT DEFINED for this component or the defined Build Plugin

Hello,
we have upgraded our NWDI (nw04s) to SP13 and to DB2 V.9. We don't know if this has something to do with our problem. The NWDS developers called us. They can't activate the changes anymore. When I check the CBS I can see, that all components are broken. Any idea?
REgards,
Alexander
Build number assigned: 487
Change request state from QUEUED to PROCESSING
REQUEST PROCESSING started at 2007-10-10 10:46:13.526 GMT
    BUILD request in Build Space "NW1_GPMS_D" at Node ID: 27,972,750
     [id: 473; parentID: 0; type: 2]
    Waiting for access: 33 ms
    ===== Pre-Processing ===== started at 2007-10-10 10:46:13.559 GMT
        Calculate all combinations of components and variants to be built...
        Analyze request DC BV... started at 2007-10-10 10:46:13.702 GMT
                'zurich.com/gpms/jco_pool' variant 'default'
                'zurich.com/gpms/jco_pool' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/yea' variant 'default'
                'zurich.com/gpms/yea' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/chgpwd' variant 'default'
                'zurich.com/gpms/chgpwd' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/rep' variant 'default'
                'zurich.com/gpms/rep' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/model' variant 'default'
                'zurich.com/gpms/model' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/idp' variant 'default'
                'zurich.com/gpms/idp' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ovt' variant 'default'
                'zurich.com/gpms/ovt' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/arch' variant 'default'
                'zurich.com/gpms/arch' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/myr' variant 'default'
                'zurich.com/gpms/myr' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/div' variant 'default'
                'zurich.com/gpms/div' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ume' variant 'default'
                'zurich.com/gpms/ume' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/com' variant 'default'
                'zurich.com/gpms/com' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ovw' variant 'default'
                'zurich.com/gpms/ovw' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/obj' variant 'default'
                'zurich.com/gpms/obj' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/chgpwdb' variant 'default'
                'zurich.com/gpms/chgpwdb' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/pdata' variant 'default'
                'zurich.com/gpms/pdata' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
        Analyze request DC BV... finished at 2007-10-10 10:46:14.049 GMT and took 347 ms
        Prepare build environment in the file system... started at 2007-10-10 10:46:14.049 GMT
            Synchronize development configuration... started at 2007-10-10 10:46:14.049 GMT
            Synchronize development configuration... finished at 2007-10-10 10:46:14.068 GMT and took 19 ms
            Synchronize used libraries... started at 2007-10-10 10:46:14.068 GMT
            Synchronize used libraries... finished at 2007-10-10 10:46:14.068 GMT and took 0 ms
        Prepare build environment in the file system... finished at 2007-10-10 10:46:14.068 GMT and took 19 ms
    ===== Pre-Processing ===== finished at 2007-10-10 10:46:14.069 GMT and took 510 ms
    Waiting for access: 3 ms
    ===== Processing ===== started at 2007-10-10 10:46:14.072 GMT
        No Components to be built.
        BUILD DCs
    ===== Processing ===== finished at 2007-10-10 10:46:17.407 GMT and took 3 s 335 ms
    ===== Post-Processing =====
    Waiting for access: 5 ms
    ===== Post-Processing ===== started at 2007-10-10 10:46:17.412 GMT
        STORE build results... started at 2007-10-10 10:46:17.413 GMT
            "zurich.com/gpms/jco_pool" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/jco_pool": store meta-data
            "zurich.com/gpms/jco_pool" in "default" variant is PROCESSED
            "zurich.com/gpms/yea" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/yea": store meta-data
            "zurich.com/gpms/yea" in "default" variant is PROCESSED
            "zurich.com/gpms/chgpwd" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/chgpwd": store meta-data
            "zurich.com/gpms/chgpwd" in "default" variant is PROCESSED
            "zurich.com/gpms/rep" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/rep": store meta-data
            "zurich.com/gpms/rep" in "default" variant is PROCESSED
            "zurich.com/gpms/model" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/model": store meta-data
            "zurich.com/gpms/model" in "default" variant is PROCESSED
            "zurich.com/gpms/idp" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/idp": store meta-data
            "zurich.com/gpms/idp" in "default" variant is PROCESSED
            "zurich.com/gpms/ovt" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ovt": store meta-data
            "zurich.com/gpms/ovt" in "default" variant is PROCESSED
            "zurich.com/gpms/arch" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/arch": store meta-data
            "zurich.com/gpms/arch" in "default" variant is PROCESSED
            "zurich.com/gpms/myr" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/myr": store meta-data
            "zurich.com/gpms/myr" in "default" variant is PROCESSED
            "zurich.com/gpms/div" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/div": store meta-data
            "zurich.com/gpms/div" in "default" variant is PROCESSED
            "zurich.com/gpms/ume" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ume": store meta-data
            "zurich.com/gpms/ume" in "default" variant is PROCESSED
            "zurich.com/gpms/com" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/com": store meta-data
            "zurich.com/gpms/com" in "default" variant is PROCESSED
            "zurich.com/gpms/ovw" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ovw": store meta-data
            "zurich.com/gpms/ovw" in "default" variant is PROCESSED
            "zurich.com/gpms/obj" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/obj": store meta-data
            "zurich.com/gpms/obj" in "default" variant is PROCESSED
            "zurich.com/gpms/chgpwdb" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/chgpwdb": store meta-data
            "zurich.com/gpms/chgpwdb" in "default" variant is PROCESSED
            "zurich.com/gpms/pdata" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/pdata": store meta-data
            "zurich.com/gpms/pdata" in "default" variant is PROCESSED
        STORE build results... finished at 2007-10-10 10:46:17.440 GMT and took 27 ms
        Change request state from PROCESSING to SUCCEEDED
        Analyze effect of applied changes to buildspace state... started at 2007-10-10 10:46:17.440 GMT
            Skip check for build time dependency cycles. DC metadata is not changed.
            Determine components that have become DIRTY due to the results of this request started at 2007-10-10 10:46:18.601 GMT
                No such components have been found.
            Determine components that have become DIRTY due to the results of this request finished at 2007-10-10 10:46:18.602 GMT and took 1 ms
            No Internal Build Requests are canceled by this request
        Analyze effect of applied changes to buildspace state... finished at 2007-10-10 10:46:18.642 GMT and took 1 s 202 ms
        Request SUCCEEDED
    ===== Post-Processing ===== finished at 2007-10-10 10:46:18.646 GMT and took 1 s 234 ms
REQUEST PROCESSING finished at 2007-10-10 10:46:18.646 GMT and took 5 s 120 ms
    ===== Pre-Processing ===== started at 2007-10-10 07:16:55.069 GMT
        Calculate all combinations of components and variants to be built...
        Analyze request DC BV... started at 2007-10-10 07:16:55.104 GMT
                'zurich.com/gpms/jco_pool' variant 'default'
                'zurich.com/gpms/jco_pool' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/yea' variant 'default'

Here are some things to have a look at:
- Check your SC definitions and their Usage Dependencies in the SLD
- Check that the basis SCA's have been imported into the track. You can quickly see this by having a look at the total nr of DCs for these SCs in CBS.

Sales order (SOBKZ = &1) is not provided for this goods movement the messag

Dear Friends,
I have created one subcontracting PO based on a sales order, so the order is belonging to special stock...
Now i got a below error when i transfer the stock to subcontractor against this PO through MB1B but it likes as warning msg(in Yellow) but i can't post this transaction.
Sales order (SOBKZ = &1) is not provided for this goods movement the message no is M7374
Kindly help me how to over come from this?
please note that as per the system suggesion i go to Define Attributes of System Messages for changing the message type from E to W. But i can't find this kind of message type in that list.
regards,
sathes

Hi,
Subcontracting for Sales Order Stock: -
Purpose: - Subcontracting is also possible in conjunction with sales order stocks. The subcontracting orders are account-assigned to a sales order. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock the time of the goods receipt. The material manufactured is also posted to the sales order stock.
The cost of subcontracting is then debited to the sales order.
Since the components are not transferred to the "stock of material provided to vendor", it is recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks.
Features: -
Withdrawal from Stock of Mat. Provided or Sales Order: -
For components that are managed in sales order stock, you can define whether the components are to be withdrawn directly from each sales order or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
You can maintain this indicator in the following places:
In the MRP view of the material master record (MRP 4)
In the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types )
Configuring the explosion types has priority over the configuration in Inventory Management.
If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from sales order stock.
Refer following link;
[Subcontracting for Sales Order Stock and Project Stock|http://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm]

Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

When I click on check for update I get error, iTunes could not check for an update to the carrier settings for your iPhone. an unknown error occurred 1630

when I click on check for update I get error, iTunes could not check for an update to the carrier settings for your iPhone. an unknown error occurred 1630
Make sure your network setting are correct and your network connection is active or try again latter.

update your itunes to 10.5.2 and error is not showing up anymore..

Popup Menu(F1- Help values) is not diaplying for a char at selection screen

Hi,
After executed the query, we are trying to get help (F4) values for info object Employee Group (EMPLGROUP) in the selection screen but it is taking long time nearly 1 hr and getting timed out. And for other Chars we are getting the help popup menu.
for your info...
There are only 6 values are there in Employee Group master data table.
And the characteristic settings in Business Explorer tab are as the following,
Display u2013 Text
Text type u2013 Default
BEx description u2013 Short description
Selection u2013 No selection Restriction
Query Def. Filter Value Selection u2013 Only values in Infoprovider
Query Execution Filter Val. Selection u2013 Only Posted Values for Navigation
Can any one please suggest us which settings we needs to change to get the popup menu (help values) for Employee Group at selection screen and what is the reason for not displaying the help popup menu?.
and can any one explain us about the setting "Query Execution Filter Val. Selection u2013 Only Posted Values for Navigation"
Thanks & Regards,
Raju. E

Hi,
I am getting the data aslo for Employee Group in the query when I drill down that char.
But I dont know why it is taking long time and getting time out to display the popup menu for help values at selection screen.
I think this is due to the below setting only at char level,
Query Execution Filter Val. Selection u2013 Only Posted Values for Navigation
and there are 3 opstions for the above seeting as below,
1. Only values in master data
2. Only values in Infoprovider
3. Only Posted Values for Navigation
Can any one help me, which opstion will solve the issue and can any one explain me what is the difference between 2 & 3
Thanks,
Raju. E

Description not coming for a Char in the cube

Similar Messages

Maybe you are looking for