Description of accounts

We have the following issue
Account 1000 (Parent)
   Cost 1-------------------------------------100------------------------for employee expenses
   Cost 2-------------------------------------200-------------------------for building repairs
Account 2000(Parent)
    Cost 1
    Cost 2
Is there a way to enter the descripition directly to the right of the field, i know we can do it thru comments however i want it visible on the webform and i want to also retrive it in smartview. Sometimes these narratives can be more than 80 characters? can i do this in public sector planning?
Thanks.

The comments are more like a justification.
I want to acheive the following
Account Number -----2014 actual---2015Budget---Increase or decrease----Explanation
100                            5000               8000                 Increase                 Because of inflation
200                            6000
300                            7000

Similar Messages

  • Not getting Line Description in Account Analysis Report

    Hi Friends,
    There is requirement to get line description for account analysis report...
    Source - Cost Management
    Category - Receiving
    Event Type - Receipt into Receiving
    I have done required setup(Application Accounting Definition) to get the line description .I am getting line description for Debit transaction but for the same source and event type i am not getting line description for credit transactions..
    Is there any way to get line description for Credit transaction.
    Please suggest...

    Please friend...share knowledge on this...

  • Display GL/cost center description in account assignment tab in PR and PO.

    My user wants to display GL and cost center description in account assignment tab of PO and PR? How can we do this?

    Hi
    Someone added same kind of stuff in the net
    We have done the following to display GL account text in ME51N & ME21N
    We registered the SAP Object: R3TR FUGR MEACCTVI for our SAP Release: 701.
    - In SE51, we added the field text_sakto to screen 1100 (Single Account Assignment) in program SAPLMEACCTVI.
    - Via SE80, we added the following code to the flow logic of screen 1100 under PROCESS BEFORE OUTPUT: MODULE fill_text_sakto in the function group MEACCTVI.
    - Within the MODULE fill_text_sakto we added the following code:
    FORM FILL_TEXT_SAKTO .
    SELECT SINGLE txt20 INTO text_sakto
    FROM skat
    WHERE spras eq sy-langu
    AND saknr eq MEACCT1100-SAKTO.
    ENDFORM.
    Thanks
    Vishnu

  • HT4623 i had go inadd vpn configuration,so that is L2tp/pptp/ipse. what am i have to write on description/ sever/ account.

    i had go in add in vpn configuration. so that is L2tp/pptp/ipse. what am i have to write on my description/ server / account.

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • How Can I add/change text/description in accounting view of Vendor master ?

    /nxk02 --> (give vendor, company code ) 
    then check the check box of 'Accounting info' under Company code data block -->  then hit 'Enter'
    --> it goes to next screen.  Then in this screen, click menu 'Extras' --> then press "Texts" under that menu. 
    So that popup screen appears with the Description.
    I need to know from where these descriptions are coming or where these descption  can be maintained ? Because I need to add/change these  descriptions to my vendors
    YOUR HELP IS HIGHLTY APPRECIATED.  Please help....
    THANKS IN ADVANCE.

    Hi Aman,
    Because these texts are maintained at Company Code level for the Vendor, they are part of the Accounts Payable configuration in the SAP IMG. 
    SPRO > Financial Accounting > Accounts Receivable and Accounts Payable > Vendor Accounts > Master Data > Preparations for Creating Vendor Master Data > Define Text IDs for Accounting Texts (Vendors)
    Transaction OBT5
    Regards, 
    Monika

  • Default G/L account description in account assignment

    Hello Experts,
    We are on SRM 7.0 having an issue with the field General Ledger Account description in default value settings.
    We get the default G/L account populated currently but not the description ..Even If we select another account from F4 description field is still blank.
    Any ideas how to acheive this without enhancing the standard components?
    Thanks
    Lavanya

    Hi
    check these mountains of notes.
    Note 1243140 - No Description returned for GL account
    Note 1438647 - Account category description in local FI validation is empty
    Note 1502229 - FAQ: LOCAL Accounting F4-Help, Description
    Note 1502160 - FAQ: Accounting F4-Help, Description
    1457285 - FAQ: Accounting PO Transfer, FI/MM Validation Errors
    1438647 - Account category description in local FI validation is empty
    1397531 - Accounting description not shown for local or REMOTE_01
    1352092 - Local accounting value help for system type REMOTE_01
    Print Selected Notes (PDF) 
    Muthu

  • MAC: Subaccounts Description in Account Mapping

    In the account structure used, the subaccount segment is dependent on the account segment. When selecting a certain account it should display only the subaccounts defined for this account (the regular behaviour in Oracle Financials and SCM)
    But in OPM MAC, upon defining an account combination for an account title:
    (N) Setup> Mapping> Accounts> Account Mapping,
    All the values and description of Subaccounts defined in the CoA for all accounts are displayed together in LoV (e.g., you will see 001 defined for account 11019, then 001 defined for account 13065, etc.,)
    If you select the right account with the right subaccount, the description of subaccounts (in forms and reports) is always the description of the first subaccount in the LoV (e.g., if you select account 13065 with Subaccount 001, the description displayed is this of the subaccount 001 which defined for account 11019 because its the first 001 in the LoV).
    Any help to separate the subaccounts and make them read the correct description?

    Hi
    Account dependencies is not handled in OPM. So I am not sure if that can be helpfed. However, regarding the descriptions I suggest you raise an SR or search metalink for some existing patch
    Regards
    Girish

  • GL account description table

    Hi guys,
    I need to extract the GL account description ( GL account long text ) for a large number of accounts.
    Is there any table where i can input the GL accounts and get the GL descriptions for all the accounts.
    Thanks,
    Srikanth.

    HI,
    Tcode: SE16
    table :  SKAT
    G/L Account No. 
    Short text 
    Long text
    Long text
    TXT20
    TXT50
    MCOD1
    Reg
    Madhu M
    Edited by: M Madhu on Mar 16, 2009 11:40 AM

  • Account description

    Hello:
    would someone please give me the description for account 276000 in CAUS.
    Regards

    A/c number description change from client to client!
    One company may have that account number for retained earnings, another company may not even have that account.
    Vj

  • BW Query in CRM Account Fact Sheet : Error

    When selecting a BW query in the account fact sheet : the following error message is shown :
    "Query can not be loaded (Data Provider "DP_1" : No service-implementation is available)"
    Do we need to create a web service for this ?

    Hi there!
    There are at least two connections required:
    1) RFC connection from CRM to BW java stack,
    2) Within the CRM fact sheet, the BW source also needs to be defined.
    Check out
    Procedure
    1.     Access the activity using the following navigation options:
    Transaction code     SPRO
    SAP CRM IMG menu     Customer Relationship Management  CRM Middleware and Related Components  Communication Setup  Middleware Parameters  Define Middleware Parameters
    2.     Choose R/3 customer fact sheet and order status.
    3.     Choose New Entries (F5).
    4.     Create the following table entry.
    Field name     User action and values     Comment
    Key      CRMCFSOLTP     
    Parameter 1     CRMCFSOLTP     
    RFC Destination     <RFC destination for the ERP system>     RFC destination has been created in building block CRM Connectivity
    5.     Choose Save (Ctrl+S).
    6.     Choose Back (F3) twice.
    7.     Choose BW customer fact sheet.
    8.     Choose New Entries (F5).
    9.     Create the following table entry.
    Field name     User action and values     Comment
    Key      CRMCFSBW     
    Parameter 1     CRMCFSBW     
    RFC Destination     <RFC destination for the BW system>     RFC destination has been created in building block BI Connectivity
    10.     Choose Save (Ctrl+S).
    Procedure
    1.     Access the activity using the following navigation options:
    Transaction code     SPRO
    SAP CRM IMG menu     Customer Relationship Management  UI Framework  UI Framework Definition  Fact Sheet  Maintain Fact Sheet
    2.     Choose BP_ACCOUNT_FS.
    3.     Choose Copy As.
    4.     Maintain the following table entry.
    Field name     User action and values     Comment
    Fact Sheet ID     ZOTIS_ACCOUNT_FS     
    Fact Sheet Title     Otis Account Fact Sheet     
    Description     Otis Account Fact Sheet     
    5.     When prompted, select Copy All Dependent Entries.
    6.     Choose Save (Ctrl+S).
    7.     Choose ICCMP_FS.
    8.     Choose Copy As.
    9.     Maintain the following table entry.
    Field name     User action and values     Comment
    Fact Sheet ID     ZOTIS_IC_AFS     
    Fact Sheet Title     Otis IC Account Fact Sheet     
    Description     Otis IC Account Fact Sheet     
    10.     When prompted, select Copy All Dependent Entries.
    11.     Choose ZOTIS_IC_AFS.
    12.     In the Dialog Structure on the left, double click and select folder option View Assignments.
    13.     Choose New Entries.
    14.     Maintain the following table entry.
    Field name     User action and values     Comment
    Component Name     BP_FACTSHEET     
    Interface View     BIReport     
    Inbound Plug     DEFAULT     
    Title     BI Report     
    15.     Choose Save (Ctrl+S).
    I hope this helps.
    John Hawk

  • Event 4740 Not Logged for a Single Account Lockout

    Domain Functional Level: 2003
    PDC Emulator: 2008 R2
    Lockout Origin DC (also the RADIUS server): 2003 R2
    For quite a while now I have been relying on Event 4740 on the PDC Emulator to track account lockouts.  Usually when the RADIUS server causes an account lockout, the Caller Computer Name is blank in the Event 4740.  This usually tells me that our
    Cisco WLAN Controller caused the lockout.
    Our Default Domain Policy is set to audit Account Logon Events for failure, Account Management for success/failure, and Logon Events for success/failure (plus numerous other things).
    This time there is no Event 4740 for this account lockout and I can't figure out why.  The events are there for other lockouts several minutes before or after this one.  Windows just hates me so it decided to skip this one.  The main reason
    this is a problem is because I just set up Scheduled Task on the PDC Emulator, triggered by Event 4740, to run a PowerShell script that will provide the help desk with a report for each account lockout, even parsing the IIS logs on the Client Access Server
    to identify which ActiveSync device caused it.  Of course the week after I announce that, Windows decides not to log one.
    Using LockoutStatus.exe I determined that the Origin DC for the lockout was the RADIUS server.
    NetLogon debug logging is enabled on the RADIUS server, however I took a nap today after being let out of work early for the holiday so by the time I checked the netlogon.bak file it had already been overwritten with newer data.
    There was, however, an Event 644 locked on the RADIUS server (pasted below with domain/computer/user details edited for privacy).  I don't even know where to start as far as trying to prevent this from happening again.  Anyone have any suggestions?
     Within the next couple months I will spin up a 2012 RADIUS server and a separate 2008 R2 DC to replace the 2003 multipurpose server, but it's not high on my boss's priority list so it's a tough sell considering the WLAN is functional right now.
    Event Type: Success Audit
    Event Source: Security
    Event Category: Account Management 
    Event ID: 644
    Date: 12/31/2014
    Time: 10:00:35 AM
    User: NT AUTHORITY\SYSTEM
    Computer: DomainControllerAndRadiusServer
    Description:
    User Account Locked Out:
    Target Account Name:
    LockedOutUser
    Target Account ID:
    DOMAIN\LockedOutUser
    Caller Machine Name:
    CISCO
    Caller User Name:
    DomainControllerAndRadiusServer$
    Caller Domain:
    DOMAIN
    Caller Logon ID:
    (0x0,0x3E7)
    For quite a while now I have been relying on Event 4740 on the PDC Emulator to track account lockouts.  Usually when the RADIUS server causes an account lockout, the Caller Computer Name is blank in the
    Event 4740.  This usually tells me that our Cisco WLAN Controller caused the lockout.
    For quite a while now I have been relying on Event 4740 on the PDC Emulator to track account lockouts.  Usually when the RADIUS server causes an account lockout, the Caller Computer Name is blank in the
    Event 4740.  This usually tells me that our Cisco WLAN Controller caused the lockout.
    For quite a while now I have been relying on Event 4740 on the PDC Emulator to track account lockouts.  Usually when the RADIUS server causes an account lockout, the Caller Computer Name is blank in the
    Event 4740.  This usually tells me that our Cisco WLAN Controller caused the lockout.

    Hi,
    I suggest you use Auditpol command to check the current auditing status on Domain Controller.
    You can type this command below:
    Auditpol /get /Category:Logon/Logoff
    If the Account Lockout subcategory is set to no auditing, please use /set option to enable auditing:
    Auditpol /set /Subcategory:”Account Lockout” /Success:enable /Failure:enable
    More information for you:
    Auditpol
    http://technet.microsoft.com/en-us/library/cc731451.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Local user account is trying to autenticating against domain controller

    Hi all.  I am seeing a weird user logon issue on one of my laptop and on another user's PC.  Both of the laptop and the PC is a member of our domain.  However, on this particular laptop and PC, we are not login with a domain user account,
    rather we've created a local user account, grant it the local admin access, and login with this local user account.  Now, on my domain controller, I am seeing a bunch of account login failure message, which happens few times per minute and filling up
    the domain controller security log.  For the laptop, this is a clean build, with fresh Windows 7 installation, alone with MS Office 2010 and few third party application (eg: Adobe Reader, 7-ZIP, etc).  I've checked all group policy to ensure there
    are no service or connection that requires domain credential access that have applied to this laptop (or the PC).  I am not sure why this local user is trying to authenticating to our domain controller.  This user account doesn't exist in our domain. 
    The only thing I can think of is Microsoft Outlook 2010 might doing back ground authentication against the domain controller by using the current login user account, I just can't confirm this.  Did anyone encountered this issue in their environment? 
    Thank you.
    Below is a copy of the event.
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          13/06/2014 8:56:27 AM
    Event ID:      4625
    Task Category: Logon
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      domaincontroller.mydomain.local
    Description:
    An account failed to log on.
    Subject:
        Security ID:        NULL SID
        Account Name:        -
        Account Domain:        -
        Logon ID:        0x0
    Logon Type:            3
    Account For Which Logon Failed:
        Security ID:        NULL SID
        Account Name:        dummy
        Account Domain:        l-sparet400sc
    Failure Information:
        Failure Reason:        Unknown user name or bad password.
        Status:            0xc000006d
        Sub Status:        0xc0000064
    Process Information:
        Caller Process ID:    0x0
        Caller Process Name:    -
    Network Information:
        Workstation Name:    L-SPARET400SC
        Source Network Address:    192.168.2.181
        Source Port:        60720
    Detailed Authentication Information:
        Logon Process:        NtLmSsp
        Authentication Package:    NTLM
        Transited Services:    -
        Package Name (NTLM only):    -
        Key Length:        0
    This event is generated when a logon request fails. It is generated on the computer where access was attempted.
    The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
    The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
    The Process Information fields indicate which account and process on the system requested the logon.
    The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
    The authentication information fields provide detailed information about this specific logon request.
        - Transited services indicate which intermediate services have participated in this logon request.
        - Package name indicates which sub-protocol was used among the NTLM protocols.
        - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
        <EventID>4625</EventID>
        <Version>0</Version>
        <Level>0</Level>
        <Task>12544</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8010000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-13T12:56:27.263546000Z" />
        <EventRecordID>299829083</EventRecordID>
        <Correlation />
        <Execution ProcessID="488" ThreadID="640" />
        <Channel>Security</Channel>
        <Computer>domaincontroller.mydomain.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="SubjectUserSid">S-1-0-0</Data>
        <Data Name="SubjectUserName">-</Data>
        <Data Name="SubjectDomainName">-</Data>
        <Data Name="SubjectLogonId">0x0</Data>
        <Data Name="TargetUserSid">S-1-0-0</Data>
        <Data Name="TargetUserName">dummy</Data>
        <Data Name="TargetDomainName">l-sparet400sc</Data>
        <Data Name="Status">0xc000006d</Data>
        <Data Name="FailureReason">%%2313</Data>
        <Data Name="SubStatus">0xc0000064</Data>
        <Data Name="LogonType">3</Data>
        <Data Name="LogonProcessName">NtLmSsp </Data>
        <Data Name="AuthenticationPackageName">NTLM</Data>
        <Data Name="WorkstationName">L-SPARET400SC</Data>
        <Data Name="TransmittedServices">-</Data>
        <Data Name="LmPackageName">-</Data>
        <Data Name="KeyLength">0</Data>
        <Data Name="ProcessId">0x0</Data>
        <Data Name="ProcessName">-</Data>
        <Data Name="IpAddress">192.168.2.181</Data>
        <Data Name="IpPort">60720</Data>
      </EventData>
    </Event>

    its the service which is using the account info and authenticating against the DC to obtain service ticket and fails
    Interesting log section is NULL SID which doesn't corresponds to any account name.
    Security ID:        NULL SID
        Account Name:        -
        Account Domain:        -
        Logon ID:        0x0
    and the below section explains , the request is made over network, which is most of the times by the service
    Detailed Authentication Information:
        Logon Process:        NtLmSsp
        Authentication Package:    NTLM
        Transited Services:    -
        Package Name (NTLM only):    -
        Key Length:        0
    The below is assumed to be performed on a client which does not run mission critical production applications which has zero impact when you perform the below actions,
    can you disable
    a) Server service
    b) Workstation service
    c) Disable RPC dependent service and services which depend on RPC and test
    Question:
    What is the level of DC hardening you have in your environment ?

  • Vendor Master Payment Terms and Reconcillation account

    Pls tell me In SPRO where Payment Terms and Reconcillation account's are maintained for Vendormaster

    HI Vinay,
    Your question isn't clear. You want to define Payment terms and Reconciliation account for Vendor Master record ?
    If this is correct then go through the below path for payment terms & Reconciliation Account.
    MAINTAIN TERMS OF PAYMENT:
    SPRO –> REF IMG –> Financial Accounting –> Accounts Receivable and Accounts Payable –> Business Transactions –> Incoming invoices/Credit memos –> Maintain terms of payment (or) OBB8
    RECONCILIATION ACCOUNT
    Accounting –> Financial Accounting –> General Ledger –> Master Records   –> Individual processing –> Centrally (or) FS00
    Enter G/L Account No. – XXXXXX
    Company Code – AAAA and select CREATE   button. 
    Under Type/Description tab
    Account Group – LIABILITIES
    • Balance sheet
    Short text – A/P (or) SUNDRY CREDITORS A/C
    G/L acct long text – A/P A/C
    Under Control data tab
    Account currency – INR
    Reconciliation account for A/C type – Vendors
    Under Create/bank/interest tab
    Field status group – G067 and SAVE.
    Rams.N
    If this is helpful, assign me points

  • Invoice Description not Transfered to GL

    Hi,
    In R11i when trying to transfer invoice to GL description invoice that I filling before is missing.
    But description of distribution invoice is available.
    When I seeing in table accounting lines and header in AP the invoice description in the invoice (Liabilities) is null, then in the invoice distribution (Charge) have the description that I filled before.
    Is this default from R11i not showing invoice description in accounting lines and GL?
    Or there is any setting / configuration for setting this?
    Thanks,
    Hakim.

    Hello Hakim.
    I'm using 11i and i have set Sequential Numbering to Always Used.
    If i enter no description both on AP invoice header or distributions, the description of the corresponding GL line is the document sequence value automatically created by the system.
    If the description field is used then this description goes to the GL line description.
    I never found a way of setting up this beahaviour, it seems intended functionality.
    Octavio

  • Administrator Account Disabled after sysprep and capture task sequence in MDT 2010

    Hi
    We are currently migrating from Windows XP to windows 7.  As part of our migration we have 5 base Images (for different areas of the business)
    Here is what we are doing:
    Create a reference machine with the source files for windows 7 Pro x86
    Install applications as part of the Task sequence to build a reference machine.
    Make the updates to the machine - required for the build.
    Run  the Sysprep and capture template to take the capture of the Reference machine.
    Import the Capture into the Operating system folder within MDT2010
    Create a task sequecne to deploy the image.
    Deploy the Image for Testing.
    Deploy the image to a machine
    Update the machine with the defects
    Re Capture the deployed machine and call it ver2.wim
    re deploy ver2.wim
    Testers test
    Defects logged + additional user settings to be captured in the build
    Re capture and sysprep runs says the capture has been succesful however after a reboot the administrator account is disabled.
    We cant seem to capture anything from here on in.  Nothing has been changed in the unattend.
    Autologon is set to enable the administrator account and the password is set to blank as this is then handled by policy when the machine is joined to the domain - we have not enabled the unattended join to the domain at this point in time but it will be
    for deploying the image.
    Have we got our image strategy wrong? does the same rule apply about sysprep running more than 3 times on a single machine if it is captured and redeployed after a sucessfully sysprep to the same hardware or even different hardware.

    Hi,
        One of the things Sysprep/WAIK do is disable the adminsitrator account.
        You mentioned that you are setting the autologing to the administrator account and that you are setting it with a blank password, you can add a simple command in to sysprep's xml to reenable the account:
    <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <RunSynchronous>
    <RunSynchronousCommand wcm:action="add">
    <Order>1</Order>
    <Path>net user administrator /active:yes</Path>
    </RunSynchronousCommand>
    </RunSynchronous>
    </component>
       Give it a try and let us know .
    Best Regards, Marianok
    Saludos, MarianoK
    Disclaimer: While I do my best to make sure everything I post is accurate and safe, I’m certainly not perfect so all this information is provided "AS IS" with no warranties or guarantees and confers no rights. Any suggested steps or code provided should be
    done under your own risk, I take no responsibilities if your system blows, the universe stops spinning, o nor for any other adverse consequence the information on this code might cause directly or indirectly.
    Aclaración: Aunque hago lo posible por verificar que todo lo que posteo es correcto y seguro, Yo ciertamente no soy perfecto y puedo cometer errores, por lo tanto esta informacion es provista "AS IS" / "Como Está" sin garantía alguna y no le confiere ningún
    derecho. Cualquier instrucción descripta o código incluido deben ser empleados bajo su propia responsabilidad y bajo su propio riesgo. No me hago responsable si sus datos se dañan, su si
    Hi Marianok,
    Thanks for your response and taking the time to read the topic we have raised. We believe we already have this step in place but perhaps we have it in the wrong area of the unattend.
    Please find below our unattend file for the capture:
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
    <component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ImageInstall>
    <OSImage>
    <WillShowUI>OnError</WillShowUI>
    <InstallTo>
    <DiskID>0</DiskID>
    <PartitionID>1</PartitionID>
    </InstallTo>
    <InstallFrom>
    <Path>.\Operating Systems\Windows 7 Install Media x86\Sources\install.wim</Path>
    <MetaData>
    <Key>/image/index</Key>
    <Value>1</Value>
    </MetaData>
    </InstallFrom>
    </OSImage>
    </ImageInstall>
    <UpgradeData>
    <Upgrade>false</Upgrade>
    </UpgradeData>
    <Display>
    <ColorDepth>16</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <ComplianceCheck>
    <DisplayReport>OnError</DisplayReport>
    </ComplianceCheck>
    <UserData>
    <AcceptEula>true</AcceptEula>
    <ProductKey>
    <Key></Key>
    </ProductKey>
    </UserData>
    </component>
    <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
    </SetupUILanguage>
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="generalize">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    </settings>
    <settings pass="specialize">
    <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <Identification>
    <Credentials>
    <Username></Username>
    <Domain></Domain>
    <Password></Password>
    </Credentials>
    <JoinDomain></JoinDomain>
    <JoinWorkgroup></JoinWorkgroup>
    <MachineObjectOU></MachineObjectOU>
    </Identification>
    </component>
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ComputerName></ComputerName>
    <ProductKey></ProductKey>
    <RegisteredOrganization>OurCompanyNameHere</RegisteredOrganization>
    <RegisteredOwner>Windows User</RegisteredOwner>
    <TimeZone></TimeZone>
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Home_Page>about:blank</Home_Page>
    <IEWelcomeMsg>false</IEWelcomeMsg>
    </component>
    <component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <RunSynchronous>
    <RunSynchronousCommand wcm:action="add">
    <Description>EnableAdmin</Description>
    <Order>1</Order>
    <Path>cmd /c net user Administrator /active:yes</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>UnfilterAdministratorToken</Description>
    <Order>2</Order>
    <Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
    </RunSynchronousCommand>
    </RunSynchronous>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    <component name="Microsoft-Windows-TapiSetup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <TapiConfigured>0</TapiConfigured>
    <TapiUnattendLocation>
    <AreaCode>""</AreaCode>
    <CountryOrRegion>1</CountryOrRegion>
    <LongDistanceAccess>9</LongDistanceAccess>
    <OutsideAccess>9</OutsideAccess>
    <PulseOrToneDialing>1</PulseOrToneDialing>
    <DisableCallWaiting>""</DisableCallWaiting>
    <InternationalCarrierCode>""</InternationalCarrierCode>
    <LongDistanceCarrierCode>""</LongDistanceCarrierCode>
    <Name>Default</Name>
    </TapiUnattendLocation>
    </component>
    <component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DisableSR>1</DisableSR>
    </component>
    </settings>
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <UserAccounts>
    <AdministratorPassword>
    <Value>QQBkAG0AaQBuAGkAcwB0AHIAYQB0AG8AcgBQAGEAcwBzAHcAbwByAGQA</Value>
    <PlainText>false</PlainText>
    </AdministratorPassword>
    <LocalAccounts>
    <LocalAccount wcm:action="add">
    <Description>Temp account</Description>
    <DisplayName>Temp account</DisplayName>
    <Group>Users</Group>
    <Name>TempAccount</Name>
    </LocalAccount>
    </LocalAccounts>
    </UserAccounts>
    <AutoLogon>
    <Enabled>true</Enabled>
    <Username>Administrator</Username>
    <Domain></Domain>
    <Password>
    <Value>UABhAHMAcwB3AG8AcgBkAA==</Value>
    <PlainText>false</PlainText>
    </Password>
    <LogonCount>999</LogonCount>
    </AutoLogon>
    <Display>
    <ColorDepth>32</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <FirstLogonCommands>
    <SynchronousCommand wcm:action="add">
    <CommandLine>cscript.exe C:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>1</Order>
    </SynchronousCommand>
    <SynchronousCommand wcm:action="add">
    <CommandLine>cscript.exe D:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>2</Order>
    </SynchronousCommand>
    <SynchronousCommand wcm:action="add">
    <CommandLine>cscript.exe E:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>3</Order>
    </SynchronousCommand>
    <SynchronousCommand wcm:action="add">
    <CommandLine>cscript.exe F:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>4</Order>
    </SynchronousCommand>
    </FirstLogonCommands>
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    <SkipUserOOBE>true</SkipUserOOBE>
    </OOBE>
    <RegisteredOrganization>Ourcomapanynamehere</RegisteredOrganization>
    <RegisteredOwner>Windows User</RegisteredOwner>
    <TimeZone></TimeZone>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="offlineServicing">
    <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DriverPaths>
    <PathAndCredentials wcm:keyValue="1" wcm:action="add">
    <Path>\Drivers</Path>
    </PathAndCredentials>
    </DriverPaths>
    </component>
    </settings>
    <cpi:offlineImage cpi:source="catalog://pr-dep-03/captureshare$/operating systems/windows 7 install media x86/sources/install_windows 7 professional.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    Hope this helps!

Maybe you are looking for

  • Is there a sync function in Aperture?

    Hi i am trying out Aperture 3. Is there a feature like Lightroom 2, Sync Folder? I use PS to edit and would like to reflect changes in Aperture 3 instead of reimport each time. Is there such feature?

  • How to Upgrade from OS X 10.5.8?

    I'm using an Intel MacBook running OS 10.5.8 and want to upgrade to Mountain Lion.  I never bothered to upgrade the OS to 10.6 (Snow Leopard), however, and now I cannot for the life of me find it available anywhere.  I understand 10.6 is stepping-sto

  • How to determine 0calday from 0fiscper field ?

    we have a requirement where the user will enter the calmonth variable in the user input, and need to get the amount for top 20 customer's on sales, in the report. The problem is we dont have calmonth in the infocube. we have only 0fiscper and 0fiscal

  • Spanning columns in a grid messes up column widths

    Hi. I've been struggling with some layout issues when using column width percentages with the Flex Grid control. It seems that if I add a column that spans 2 or more columns, the column widths of the entire grid are altered. The strange thing is that

  • Send text file via serial

    hi i've trying to send a text file via rs-232 but no success The file contains a code for a device im dealing with, when i send the text file with labview to the device, it went ok with no errors, but when i connect the device on hyperterminal and ch