Description on triggered event of Cisco director..

Hi,
I am looking for any document, which can elaborate the Triggered event description to understand what actually happend on port or any componenent.
Ex.
Triggered event: [PI_FSM_EV_FCOT_REMOVED]
Triggered event: [PI_FSM_EV_FCOT_INSERTED]
Thanks.
Rajeev Ranjan.

hello Rajeeve,
Hope this document will help
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/sysmgnt/nxos/snmp.html

Similar Messages

Regarding Workflow triggering event.

Hi,
Description: I have created a Object type and a event for the same by transaction SWO1, after that i have created a WorkFlow(WF) for which the triggering event is the event i have created in the Object Type. There is a report in which i have used the FM "SWE_EVENT_CREATE" and passed the Object Type, Event Name, Key field values and the creator.
Problem: When i am executing this report the FM is called and the sy-subrc after call is 0, stating that the call was succesfull, but the WF is not getting triggered when i went to transaction SWI2_FREQ to check this WF is not at all triggered. But when i tested from WF transaction SWDD it is working fine.
Could anyone please explain me on this. or is there any other way to use an event of a Object Type to trigger WF.
Thanks and Regards,
Raghavendra Goutham P.

hi gauthum,
try this chks.
Workflow Trace On/Off - SWU8
Display              - SWU9
Delete              - SWU10.
Work Item Analysis    - SWI1
Identifying workflow for the work Item :
Tx : SWI1 - Enter the workiem id which has been identified in workflow log
       The details consists of workflow of the workitem.
WorkFlow Errors :
1. Workflow Not Started           - Using Event Trace we can Identify
2. Started but No Proceeded           - Wrong Object Keys
3. Problem in Work Item Execution
     Dialog Work Item          - Agent Determinaion Error ( Position,Role,User )
                         - Role Resolution Error
                           Reqd Element would no be
                           Set in Binding
     Background Work Item      - Make Foreground and Test once Sucessfull make it Back round
rgds
nver
if hlped mark points

Work Flow - Triggering Event through Webdynpro

Hi,
I am new to Workflow. I have generated the Workflow related to claim (Objects as ABAP Class). Now I have generated Webdynpro component and through this I need to execute the Workflow. I have used the FM SAP_WAPI_START_WORKFLOW & SAP_WAPI_CREATE_EVENT. To raise the event 'cl_swf_evt_event=>raise'. I have used. But this is not triggering event. So, Any one can help me on this issue.
In workflow using ABAP CLASS is essential or Business object.
In my case I have used only ABAP CLASS. In workflow I have generated the Triggering event as SAVE. In webdynpro I have generated the code in 'ONACTIONSAVE'. When ever the user clicks SAVE' button. Workflow shouild trigger and approver should receive the mail as notification and he/she will approve/reject the claim.
Thanks & Regards
Kannappan

After SAP_WAPI_START_WORKFLOW do you have COMMIT WORK?
Does the SAP_WAPI_START_WORKFLOW return some error message?
Are you sure that the event is not triggered? Check this with event monitor SWEL (turn monitor on in SWELS).
Also, ready Jocelyn Dart's blogs about ABAP OO. She have clear instructions about how to trigger ABAP OO events.
Regards,
Karri

Triggering event from for-each

Hi,
I have a process that takes long to execute, I want to be
able to send a progress notification to the user with the hope of
not getting him bored or impatient, for some reason I can't achieve
it and I don't know where to go for help, if you know how to solve
this, any help will be greatly appreciated.
I have some code like this:
<code in mxml for my application>
- component declared .. onXEvent="showProgress()"
- script for showProgress calls refresh for ProgressBar
Component
</code in mxml for my application>
<code for my component>
for each (var myObject:xObject in MyCollectionOfMyObjects)
// do some complex logic and calls methods for this item
// creates and triggers event for progress notification
</code for my component>
I would expect to see my ProgressBar advancing as the process
is completed, but for some reason the process seems to take control
of the execution and no onProgressEvent is fired until the foreach
finishes execution. It will run perfectly in the debugger (step by
step) but it doesn't work at runtime.
Is there any way I can achieve this in Flex?? Is there any
event class I can use to solve this issue?
maybe anyone has done this before or knows a link to more
information on this subject?
Thanks in advance
William Vega
MCSD / Beginner Flex Developer

Flash functions execute within a frame. They finish before
any UI rendering is done. You will have to use callLater , somehow,
within your loop to give the UI a chance to draw.. There is a more
detailed answer to this thread somewhere else.
Tracy

How to use Mulitple DAQs with a single triggered event on only one of the DAQs

I have three PXI6115 and would like to tie all these to a single triggered event on one of the DAQs. I've scaned the examples and any assistance would be greatly appreciated....

TCjr,
Please refer to your other post:
How to use Multiple DAQs with a single triggered event on only one of the DAQs

Triggering event FMRE-CREATED in an infinite loop

Hi guys,
Iu2019m having a big problem in Public Sector Management with Founds Management Government when I create a Found reservation Tcode FMX1.
My problem is the triggering event FMRE-CREATED (event to start the Workflow) because when the document is created, this event is generated by the system which is fine, but inside on my Workflow I have a task to change the status with FMRE-SetLock, when this method is executed, automatically trigger an event FMRE-CREATED again, so my WF gets in a infinite loop.
How can I tell the system to donu2019t trigger this event when the status is changed?
Thanks a lot
Felipe Uribe.

Hi,
but inside on my Workflow I have a task to change the status with FMRE-SetLock, when this method is executed, automatically trigger an event FMRE-CREATED again, so my WF gets in a infinite loop.
How you changing the status? Check any Function Module or BAPI to change the status.
You have acheive it via Start Condition, check are you getting entry in the Table SWFREVTLOG for Creation.
If second time creating, check for the entry in the table, if found not allow it.
Regards,
Surjith

Description of bus.event type is displayed with incorrect sequence in query

Dear experts,
I have created a query in logical database PCH in order to display the description of business event types. The problem is that if the description's length is more than 1 line, the query displayes the lines not in order (e.g. line with tabseqnr 1 first, line with tabseqnr 2 second etc) . It displayes first the line with tabseqnr 2.
Thank you in advance,
Vana Sounta

The first thing you should do with any used computer is to erase the hard drive and install the operating system from original media. If you didn't receive installation discs with the Mac, you'll need to order them from Apple customer service; or, if you want to install a newer OS version than the one the machine shipped with, find a retail disc. The newest version you can run is 10.5, though you might have to add memory. The disc will be hard to find and expensive. Beware of scams, especially on eBay, and above all don't buy the gray discs that came with another Mac. Trying to get a 10.3 system to work with modern websites is probably a waste of time.

Issue in triggering events in task

Hi,
In my workflow there is a fork and after a fork there is a task for which triggering event is defined and this particular event is triggered from zprogram and agent for task is determined using a rule.
In zprogram logic is written as event (triggering event for task) is triggered when all 4 users in fork presses submit button.
Problem is when 4th user presses submit button workitem is created in workplace of agent defined for task and in 4th user as well.Workitem should not be created for 4th user.
Please suggest.
Regards,
Kaustubh.

Hi Rick,
I have defined single task in all branches of a fork with CONFIRM END OF PROCESSING tick in task. Task is to call ztransaction.
Problem is if all users in a fork enters into transaction and by clicking BACK comes out without pressing SUBMIT button in ztransaction and clicks COMPLETE WORK ITEM flow will go to task defined after fork which i dont want.
Flow should go to task after fork only when user presses SUBMIT and COMPLETE WORK ITEM button.
Hence I have created triggering event for task which gets triggered only after all user presses SUBMIT.
Please suggest.
Regards,
Kaustubh.

Multiple BIUs with one triggering event

Dear Experts,
I am trying to create a B1i scenario that does something similar to the following:
1. Journal Entry created in sender system by a user
2. Journal Entry created automatically in receiver system by B1i
This much works so far, my question is the next two steps
3. Another Journal entry created automatically by B1i in sender system
4. Finally another journal entry created by B1i in receiver system
So for one triggering event (manual adding of JE in sender) I want B1i to create 3 new documents - basically have 3 bius run from one triggerring event.
I've had a bit of a look around and haven't really found anything useful; is this easier than I am thinking or will there be some trick to it?
Thanks in advance,
njmog1

To be honest, I solved it in quite an ugly way..
First, I set it up so that B1i does not ignore the Events created when it creates a document (You can see more on that on page 9 of the guide 03. Extensibility)
Next I created a new transaction code in Business One journal entries called "B1i"
So basically I have 4 BIUs, the first one is triggered by an outgoing payment. and B1i creates a journal entry - and I set the memo to be something like "JE created by B1i Step 1".
For the second BIU, the filter is "Transaction Code equal to B1i and Memo = "JE Created by B1i Step 1" - this creates another JE, and I set its memo to be "JE created by B1i Step 2"
For the third BIU, the filter is "Transaction Code equal to B1i and Memo = "JE Created by B1i Step 2" - this creates another JE, and I set its memo to be "JE created by B1i Step 3"
etc. etc.
It's an ugly solution but I got it done quite quickly, If anyone has any suggestions to improve it, let me know! And if it's not clear to you, let me know what I need to clear up

Which container element contains the triggering event name?

hi,gurus,
i have a workflow template, and i want to use a 'switch' to deal with different triggering event inside the template logic.
but i can not find a element in the container which supposed to contain the triggering event name.
could you please help me ?
br.
zj

Hello,
The element which stores the name of triggering event is '_EVT_NAME' which is present in the event container. To use it in the workflow template, you have to create an element in the workflow container and bind this element to the above mentioned element through the binding for triggering event.
Thus you can use the workflow container element in the switch.
Hope this will help.
Regards,
Samson

Notification mail according to triggerring event in workflow

Hi All,
am doing customer master workflow using KNA1 Business object, it has event CREATE and CHANGE.
whenever event CREATE is triggering workflow, i want to send notification mail with title 'CUSTOMER 999 CREATED'.
whenever event CHANGE is triggering workflow, i want to send notification mail with title ' CUSTOMER 999 CHANGED'.
Could you please advise, how can i handle notification mail according to triggering event.
Thanks in advance.
Regards,
Balamurugan.

You can either trigger a 1 step workflow that has a send mail step. The triggering event of the Workflow should be CREATE and CHANGE event of BO KNA1. You have to activate the linkage between event and workflow in PFTC. You have to maintain some entries in SWE2.
After you have done this check your development from Tcode SWEL.
Thanks
Arghadip

In Which table Will maintain the All Workflows Triggering Event Details?

Hi,
Can Any one tell me
In Which table Will maintain the All Workflows Triggering Event Details?

Hi Mohit,
The Tr Codes KE29N/KE28L will give me the Logs of Past TDD runs. However, i would like to see the all the variants in a go. Due to a Organizational change, there is a new characteristics introduced. Now we need to change the sequence of the TDD runs. Since there are lot of TDD Variants that are in use. we need to get all of them into an excel and then decide the necessary changes.
Thanks & Regards
Surya

How to call pragma autonomus_transation in repeated triggering event

How to call pragma autonomus_transation in repeated triggering event
eg :
create or replace trigger trg_1
after insert on aa
for each row
declare
PRAGMA AUTONOMOUS_TRANSACTION;
begin
insert into aa values(10);
end;
insert into aa values(20); ..... can u help me pl

Welcome to the forum.
How to call pragma autonomus_transation in repeated triggering event You don't, unless you want to corrupt your data.
Read:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551198119097816936
http://www.oracle-base.com/articles/9i/MutatingTableExceptions.php
http://www.oracle-base.com/articles/misc/AutonomousTransactions.php

Alerts -triggering event

Hello All ,
i am working on Alerts .
can any body please tell me , what is " Triggering Event " ,how it is working ,can i get some detail explanation of this .
Thanks,
Aravind .

Hi Aravind,
Triggering Event means that you need in certain condition annonce that Event is happend. And then every one who "waiting" for this Event is happened starting to do their jobs. In Alert example when a confirmed BP is a "Golden Customer" you want to popup an alert to the user.
So what you need to do in your ALERT class when you check that you need to popup an alert you Triggering your Event and in customization when you created an alert you insert this alert as Triggered Event.
Create an Interface ZIF_CRM_IC_EVENTS_CON and add there Interface IF_CRM_IC_EVENTS_CON_BASE in your inerface add your Custom events on Attribute section. In customization you will see your Custom Events so you can choose it.
Good Luck
Eli Steklov
Please Reward Points if it Helped :-)

Triggering Event in BW through a ABAP Program in R/3

Hello Friends,
I am working on triggering a process chain in BW using ABAP program in R/3.
1. I have created a test process-chain in BW which sends test email upon running. This process chain is triggered by an event "Z_START_PC".
2. I created a function module "ZBW_EVENT_RAISE" which triggers this event.
 ( This function module is "remote enabled module")
3. I tested running the process chain, with function-module (SE37), which works fine.
 ( i.e. I do receive test-email after..)
4. Now I created a ABAP program "ZBW_EVENT_RAISE" in R/3.
 The code of which is as follows:
 REPORT ZBW_EVENT_RAISE.
 parameters: rfcdest like t000-logsys.
 parameters: bwevent like tbtco-eventid.
 call function 'ZBW_EVENT_RAISE'
 destination rfcdest
 exporting
 eventid = bwevent.
5. When I try to run this ABAP program in R/3 (SE38),
 The process chain does not get triggered.
(a) The "rfcdest" i got from SM59 - RFC Destinations -
 R/3 Connections - BW Development Server Client
 Value is "BWDCLNT999".
How do I go about debugging this issue? I know for sure, the BW- function module -- to Trigger -- to Process-chain is working fine. Only part is R/3 to B/W function module starting.
Any help is appreciated.
I promise to award points.
Thanks
PK

in ST05 there is an option for RFC trace. Not sure how much detail that will give you but you can try.
It is possible that your userid doesn't have an RFC call authorization in R/3. Do a SU53 immediately after running the program.
Also, replace the FM with any other FM that you know for sure runs (eg some BAPI FM) and run it - either in SE37 in R/3 with RFC destination for BW, or, from your code itself and see if that works (you can check return code).

Description on triggered event of Cisco director..

Similar Messages

Maybe you are looking for