Description with the IP Address

Hi Budies
let me know is there any comand by which i can specify description with the Secondary IP addresses assigned on an interface ?
i know i can describe an interface but how to describe an ip address is my problem.I've already unsuccessfully tried it with CiscoIOS 12.3(12)

Hi chetri,
As far as i know, there can be only one description for an interface. its interface based and not ip address based. You can keep adding the descriptions on the same line , if you want ..
description "primary - LAN , Secondary1 - Internet"
hope this helps.. all the best..
Raj

Similar Messages

  • How do I install a new Exchange account with the same address as my old Exchange account and have my bcc mail not go to the old account?

    I have an iPhone 5s running iOS8 and an iPad, up to date.  I have recently changed my mail server but not my email address.  My "old" mail account is an Exchange account and I have also set up a "new" Exchange account with the same address but with the new mail server details.  When I receive outside, third party emails they are routed correctly to the "new" Exchange account but when I bcc myself or receive other emails from any account with my domain name the emails are routed to my "old" Exchange account.  I have changed the default account settings to the "new" Exchange account.  Also, if I send myself an email from my laptop, through the new mail service provider, it is routed correctly on my laptop but incorrectly on my iPhone and iPad.  It appears as though the Apple products have cached my email address and routing and won't look to pick up the new mail server details. I don't see anything in the mail account settings or contacts that allows me to refresh or clear the cache.  The result is I now have mail in 2 accounts. If I can get the misdirected mail from the odl account to the new one I will then make the old account inactive.  Anyone have any ideas on this one?
    Thanks in advance for your time and ideas,
    DAA

    Can you set up a rule in your old account to forward mail to your new account and then delete it from the old account?
    (1012)

  • After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But wont work anywhere now

    After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But won't work anywhere now.  I tried re-setting but has not worked.  Any ideas would be appreciated.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • When trying to but in app purchases I get an error that says "iTunes password and account is not synced with the email address"!  How can I fix this?

    I try and buy in app purchases but it won't let me and gives me the above error message: "iTunes password and account is not synced with the email address"!  How can I fix this?

    Are you running modified software on your phone?  This error seems to be common if the firmware has been modified and you're trying to restore the phone again. 

  • SQVI to display the list of vendors with the email address

    Hi can any one please provide me the steps for SQVI to get the list of the vendors(LFA1) with the Email address ( ADR6 )

    go to t-code sqvi> enter ztest or any cutom name>create>enter title>enter comments
    -->slect table join asa a data source and hit enter..
    -->press shiftF1 and enter table name LFA1 and again press shiftF1 and enter table ADR6..and hit
    enter
    now you will get the table relation ship between the LFA1 and  ADR6 ..
    next go to se16 and get the value for the vendor and pass the value to adr6 ..
    Prabhu

  • Linking of AD User name with the ip address

    hi team,
    i need your support to know about how we can establish Linking of AD User name with the ip address.???
    Regards, Ravi Kumar

    Hello,
    as said before, ip addresses belong to computers and NOT to users.
    Every time a computer starts it will either use a fixed ip address configured on the machine or get one from a DHCP server.
    If you have the need for finding user accounts logging on to a computer you have to enable logging/auditing so that information as this are logged in the event viewer either from the DCs or the local computers.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • When mac email changed to icloud a while ago i lost all my emails and things i have an email subscription to send emails but they do not reach the email that i updated with the same address any help?

    When mac email changed to icloud a while ago i lost all my emails and things i have an email subscription to send emails but they do not reach the email that i updated with the same address any help?

    If you purchased about 2 years ago new I am sure it is a Intel iMac. To find out what type of iMac you have just click on the Apple menu item in the finder and select about this Mac. I would check the ISP mail site and get the correct outgoing mail server info.   

  • Reply with the same address the message was sent to

    Hi guys,
    Sorry in advance for my bad english.
    I am using a Gmail account which fetching multiple mail from multiple e-mail account.
    On web-app desktop Gmail I set up the option "Reply with the same address the message was sent to".
    Nevermind I know that has no impact of the behaviour of built-in mail app on iPhone.
    Please would you know how to reply as default setting, directly from the e-mail account which receive first my e-mail not by using the field selector "From :" (I would like this field select automatically the right e-mail account).
    For information I set up the other smtp server which I would like to use (Config> Mail, Contacts, Calendars > XXX (account) > Account > (Outgoing Mail Server) SMTP > The other SMTP Servers are all on "On").
    Many thanks in advance for your helpful answers.
    J.N. P.

    Dear Johnnnyone,
    Thank you for your advise. I just deleted and re-installed it but again I still experiencing the same challenge.
    Let me show you what I mean on below print screen from my PC....
    What I want from my Gmail at Black berry is to have the same option as appeared on my PC. In my PC I can send as other user using Gmail.
    Deeply appreciate to have your advise all. Thank you very much once again  

  • BP Address not replicated with the Premise address in IC-Web during move-in

    Hello,
    When we do the move-in of a BP, the premise address is not maintained as an additional address for BP in CRM and IC Web environments. We see the address being maintained in ECC for the BP, but don't see the same address replicated in CRM and IC Web. Please let me know if we are missing anything.
    Thanks
    Santosh.

    Hi,
    Does anyone have any inputs for the above question.
    One more thing we observed is that, whenever we process a move-in (move-in date 7 days from processing date), the primary address in the BP still remains the old address (this is expected), and we see the new address in the Address overview with the new address validity from Move-in date. After 7 days, when the service address becomes the primary address for the BP (This happens after the move-in date), the address in the address tab is replaced with the service address and now this changed address is replicated into CRM. At this time we also see 2 addresses in the overview tab in both CRM and ECC.
    To test this scenario, we processed a move-in with a prior date (Move-in date equal to current date or prior date), we found that the BP address is replaced with the service (premise address) and we see 2 addresses in address overview tab. Now we see the same being replicated in CRM.
      Now my question is, how can we make sure that even if the new address has validity for a post date, CRM will show 2  addresses in address overview tab.
    Edited by: Santosh Kolleti on Feb 17, 2011 12:32 AM

  • Hi.  I'm trying to set-up the wireless access times in my Airport Utility.  I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these?  Thanks.

    Hi.  I'm trying to set-up the wireless access times in my Airport Utility.  I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these?  Thanks.

    Let's say that an iPhone is one of the wireless clients that you want to allow access to the network.
    The Description of this device is anything that you want to specify for easy identification purposes. For example, the Description might be something like......
    Rex's iPhone
    The MAC Address, also known as a Wi-Fi Address is  a unique indentifiction number that is assigned to every device. The number will always follow this form:
    xx : xx : xx : xx : xx : xx, where "x" could be a number or letter.
    To find the MAC Address or Wi-Fi Address of an iPhone or iPad.....
    On the Home screen.....
    Tap Settings
    Tap General
    Tap About
    Wi-Fi Address is the item that you want
    If you have a Mac computer......you can find the MAC Address or Wi-Fi Address as follows:
    Open System Preferences (gear icon on the dock)
    Open Network
    Click on Wi-Fi on the left
    Click Advanced at the lower right
    The Wi-Fi Address for the Mac is located at the bottom of the window
    Other wireless devices usually have the MAC Address or Wi-Fi Address on the label on the back or bottom of the device

  • Mac is not connecting to network systems with names it's only connecting with the IP address why?

    Mac is not connecting to network systems with names.
    It's only connecting with the IP address why?

    It sounds like a problem with the domain name server. Be sure you are using the correct DNS in System Preferences > Network, and if you are make sure it is functioning correctly.
    Best of luck.

  • How can I resend an IPhoto e-mail with the wrong address?

    How can I resend an IPhoto e-mail that was returned because of an error I made in the address?

    ImagineThat:
    Welcome to the Apple Discussions. There is a 3rd party application, pdf-RecoverPro, that will let you lock the file to printing, changing, etc. You set two passwords, one to let the user view it and one to unlock the restricted features. Just provide the first password and send the file. You can try the demo version. It just saves one page in demo mode.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • If I delete my account from apple, I be able to create a new one with the same address?

    Here is the thing, currently I have an id of apple with my gmail account, which I associated the iCloud account. I would like to delete my account to create a new from the iphone, so it is "iCloud" as my primary address. I want my apple ID is "[email protected]" not "[email protected]".
    Thanks

    Unfortunately, you can't.  The primary address for your iCloud account must be a non-Apple email account.  The only exception to this is for former MobileMe subscribers who migrated to iCloud when MobileMe closed, which was 18 months ago.

  • I open a pdf file with club members names and emails. I used to be able to click on the members email and a outlook box would appear with the email address .

    I have a list of names and email addresses (250) and in a previous version of firefox I would go on the web page and when I would place the curser over the members email address and click it would automatically bring up an Outlook email to send box with the members email address already listed and ready for me to enter any information. This new firefox version (19) just lets the curser go across the email address and nothing happens when I click. How do I get the previous feature back?

    Current Firefox versions have enabled a new build-in PDF Viewer and that viewer doesn't have all the features that the Adobe Reader has.
    You can change the action for Portable Document Format (PDF) from Preview in Firefox to use the Adobe Reader or set to Always Ask.
    *https://support.mozilla.org/kb/change-firefox-behavior-when-open-file
    You can set the pdfjs.disabled pref to true on the <b>about:config</b> page to completely disable the build-in PDF viewer and use the Adobe Reader instead.
    See also:
    *https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them

  • On certain web sites the page opens then over runs to a blank screen with the same address and stopped showing on the status line

    When trying to access certain web pages the browser finds and loads the page then 'over rides' to a blank screen. The page address doesn't seem to change but the tab shows continued 'loading' The status bar at the bottom shows either 'stopped' or 'done'. return re-loads the page then over runs again. Reload does nothing. Usually its a hyperlink from one page to another. It seems random.
    Recently it has started to over run into a 'search' type page ie. local yellow pages, local cable company, heavy equipment sales, and things like that.

    It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

Maybe you are looking for