DESCRIPTIVE FLEXFIELD의 REFERENCE FIELD추가방법

제품 : AOL
작성날짜 : 2004-05-20
DESCRIPTIVE FLEXFIELD의 REFERENCE FIELD추가방법
==========================================
PURPOSE
Descriptive Flexfield의 기능 중 Reference Field를 사용하기 위해서는
원하는 Form Block의 Field를 Reference Field로 등록해야 한다.
Explanation
1. Place cursor in the form field which you want to use as a Reference field.
2. Select Help > Tools > Examine from the menu in order to obtain the <
Value>.
3. The (N) Setup > Flexfields > Descriptive > Segments form Context
Field
Value Code for the DFF must = <Value>
4. Register the <Block>.<Field> as a Reference Field in the
(N)Setup > Flexfields > Descriptive > Register form.
5. Pick registered Reference Field from the LOV in the
relevant (N) Setup > Flexfields > Descriptive > Segments form.
즉, 원하는 Form의 Field에 마우스를 가져다 놓고,
Help -> Tools -> Examine화면의 Block과 Field이름을 확인한 후
Reference Field등록하는 화면에 그 Block.Field를 등록하면 된다.
Reference Documents
Note : 144227.1

Thanks Sandeep,
Can you tell me what values does this context field hold? Someone have defined it in the location you specified but whats the value which it holds? For example In the DFF "Add'l Periods of Service Information" the Reference Field was defined as "C_LEGISLATION_CODE". Whats it doing exactly over here?
Thanks
J

Similar Messages

The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
Mruduala

You are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo

How to display descriptive flexfield values without clicking on the field

Hi,
We are using ATTRIBUTE1 in PO Headers to provide a field for entering an emergency PO number. When users query a PO in the Puchase Order Headers form with a value in this field, they want the value to display on the form without having to click on the [] field to open up the DFF. Is this possible? This is the only DFF we're using on this form.
The user is telling me the 11i instance used to but it is no longer there in R12.
Can anyone help?
Thanks.

Hi,
Check out Reference field and Default Context at DFF level.
Regards,
Sridhar

Descriptive flexfield setup

Hi, need help and advise.
I have created a descriptive flexfield for attribute17 column of hz_cust_site_uses_all table with value set 'Yes/No' (LOV type) for validation.
My problem is how to make the descriptive flexfield to reflect the existing value store in this column as default value as the existing records
store with 'Y' or 'N' in the table.
Regards,
BE.

Hi, thanks for respond.
the value is updated correctly with 'Y' for attribute17 in the table for selected customers via API as the status return from API was 'S' - Success.
Actually the value set assigned to flexfield is using the 'Yes' and 'No' from the fnd_lookups table and defaulted to 'No' for this flexfield.
So, even I have updated with 'Y' in the table but the flexfield is still reflecting the default value 'No' at the form level.
When setup for the flexfield, the 'Synchronize with Reference Field' is enabled and context code is 'BILL_TO' and 'Global Data Elements'.
With the same table, I have no problem for attribute12 with the context code 'Global Data Elements'
but I am having problem for attribute17 with the context code 'BILL_TO'.
Regards,
BE.

Descriptive Flexfields

In an implemented flexfield i dont want to see the context field in the descriptive flexfield pop-up window instead of that my segments must select automatically when i choose values in the reference field which is in the same block
please do respond

HI,
In the Columns window(In the descriptive flex field) defining the window one check box is there ,uncheck that
check box
Regards
-chandra sekhar byna

JAEHYLEE , DFF에 reference field 추가 하는 법

PURPOSE
DFF에 reference field 추가 하는 법
Workaround
N/A
Solution Description
1. Place cursor in the form field which you want to use as a Reference field.
2. Select Help > Tools > Examine from the menu in order to obtain the <
Value>.
3. The (N) Setup > Flexfields > Descriptive > Segments form Context
Field
Value Code for the DFF must = <Value>
4. Register the <Block>.<Field> as a Reference Field in the
(N)Setup > Flexfields > Descriptive > Register form.
5. Pick registered Reference Field from the LOV in the
relevant (N) Setup > Flexfields > Descriptive > Segments form.
Reference Documents
209810.1

Program to add in the Assignment views Descriptive flexfields segments

Hi,
I have added two context fields values in the descriptive flexfield "Additional Assignment Details". I see that the view hrfg_employee_assignments has reflected those changes and has included 4 attribute columns:
CREATE OR REPLACE VIEW HRFG_EMPLOYEE_ASSIGNMENTS
(BUSINESS_GROUP_NAME, PERSON_NAME, PREFIX, SUFFIX, FIRST_NAME,
LAST_NAME, PREFERRED_NAME, MIDDLE_NAMES, TITLE, COLLECTIVE_AGREEMENT_NAME,
ASSIGNMENT_NUMBER, NORMAL_START_TIME, NORMAL_END_TIME, PRIMARY_FLAG, INTERNAL_ADDRESS,
MANAGER_FLAG, EMPLOYMENT_CATEGORY, ASSIGNMENT_TYPE_CODE, ASSIGNMENT_TYPE, WORKING_HOURS_AMOUNT,
WORKING_HOURS_FREQUENCY, EMPLOYEE_NUMBER, HIRE_DATE, ORIGINAL_DATE_OF_HIRE, WORK_TELEPHONE_NUMBER,
SUPERVISOR_NAME, SUPERVISOR_NUMBER, SALARY_BASIS, ORGANIZATION_NAME, POSITION_NAME,
JOB_NAME, LOCATION_NAME, GRADE_NAME, PEOPLE_GROUP, PAYROLL_NAME,
RECRUITMENT_ACTIVITY_NAME, VACANCY_NAME, USER_ASSIGNMENT_STATUS, PER_SYSTEM_ASSIGNMENT_STATUS, PAY_SYSTEM_ASSIGNMENT_STATUS,
PRIMARY_FLAG_CODE, MANAGER_FLAG_CODE, EMPLOYMENT_CATEGORY_CODE, FREQUENCY_CODE, PER_SYSTEM_STATUS_CODE,
PAY_SYSTEM_STATUS_CODE, PEO_GRP, PEOPLE_GROUP_50309, CONTEXT, DATE_OF_TEST_2,
TIME_OF_TEST_2, PLACE_OF_TEST_2, TYPE_OF_TEST_2, DAYS_FOR_PAY_3, HOURS_FOR_PAY_3,
*"PROM/DEM/TRANSF_ORDER_NUMBER_3"*, ASSIGNMENT_ID, BUSINESS_GROUP_ID, GRADE_ID, JOB_ID,
LOCATION_ID, ORGANIZATION_ID, PAYROLL_ID, PERIOD_OF_SERVICE_ID, PEOPLE_GROUP_ID,
PERSON_ID, POSITION_ID, RECRUITMENT_ACTIVITY_ID, SALARY_BASIS_ID, SUPERVISOR_ID,
VACANCY_ID, COLLECTIVE_AGREEMENT_ID)
AS
SELECT .....
I see that it has added comments in these view columns :
DESC CONTEXT,800,PER_ASSIGNMENTS,A
DESC SEGMENT,800,PER_ASSIGNMENTS,A,ASS_ATTRIBUTE1
DESC SEGMENT,800,PER_ASSIGNMENTS,A,ASS_ATTRIBUTE2
and so on.
Now I disable those value codes in the descriptive flexfield from System Administrator and add two new context values.
Which program should I run to reflect these changes in HRFG_EMPLOYEE_ASSIGNMENTS view?
Thank you.

Unfortunately Microsoft decided to make things complicated in 2010. Resource.Assignment.Text1 is not the same as Task.Assignment.Text1.
As far as I know, VBA is the only solution. I would run the code in the before_save event.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Updating PO Lines Descriptive Flexfield

We're currently still on R11.5.10.2 and we're customizing the Purchase Orders form by adding an option under the Tools menu to mass update several different fields. One of the fields happens to be a descriptive flexfield on the PO line. We're able to update the DFF, but the actual updated value doesn't seem to be reflected/displayed after we perform the update. If we cursor and tab to the DFF and open it up, it actually has the updated value, but when we close the DFF field, it still displays the old value. We've tried different calls to see if we can refresh the displaying of DFF, but no luck. How can we customize to accomplish this in the form?

It's a straight update to the base table from the PO form. We're just assigning the values to the DFF (in this case, ATTRIBUTE1) and let the form update the record. When we assign the value to the ATTRIBUTE1 field, we cannot see this change right away. If we tab to the DFF, the latest value is there. And when we tab out of it, the latest value is not being reflected. In other words, the DFF is not displaying the latest value. It is only after you save the data that it displays the updated value. I was hoping that there may be some API related call to DFF that we can make to display the change right away before the data is saved, but I'm not able to get this to work within the form.

Journal Import - Import Descriptive Flexfield = Yes

Hi Gurus,
If i run the Journal Import - Program with Import Descriptive Flexfield parameter = 'Yes'.
Will it allow if a descriptive flex field is null.
I do not want to import the Journals if the Attribute1 is NULL. Kindly help me with the best way of doing this..
Thanks,
Genoo

I wont be able to comment on it with certainity.
You can perform a trial and error run by doing the following:
1st case: i would recommend you to run the Jounral Import by setting the Descriptive Flexfield Import as Yes and with validations and without making the changes in the code.
2nd case: i would recommend you to run the Jounral Import by setting the Descriptive Flexfield Import as Yes and with validations and by making the changes in the code.
Compare the results of the two scenario above and make changes accordingly if required, However prior to making the changes please consult it with a technical resource to get his thoughts on the same.
Also you can evaluate what validations are provided by Oracle while importing the DFF since may be that you dont have to anything else apart from your side and Oracle standard code can take care of the same.
Hope this helps
Thanks and Regards
Manish Jain.

Non-enabled or non-existent descriptive flexfield segment

hi m getting this Error when m trying to Save Text Field value in DFF segment
A value has been provided for a non-enabled or non-existent descriptive flexfield segment. (SEGMENT=ATTRIBUTE17) (VALUE=Y)
regards,
Vivek

Are you trying to use a DFF segment which is not used in the current context. This means you also have the DFF segments being used on the Page.

FNDLOAD for Descriptive Flexfield update

Hey everyone,
Just wanted to consult you on a matter,
I've updated a descriptive flexfield definition (moved some of the segments from GLOBAL to a new context I created = I deleted from global, that freed the attributes again, and then I defined them under a new context field for that DFF).
Now - to move that setup to another instance, I download and uploaded DFF via FNDLOAD.
At first - update was not successful due to the fact that attributes used in new context were occupied by global.
So -
my idea was to just delete ALL DFF definitions in new instance, and then use FNDLOAD to upload.
Turned out ok, and update seems successful.
I just fear deleting DFF definitions completely might harm something and I feel I might be missing something here.
(After all, if it should be OK, why doesn't FNDLOAD delete old definition during update process and then create the new definition , like it does with personalizations??)
Would love to hear your ideas before I do the same on production instances...
Thanks,
Aaron

Aaron,
I believe you should not delete a DFF, instead you will have to disable it.
Note: 176867.1 - Oracle Applications Flexfields Frequently Asked Questions (FAQ) -- 5. Can I delete a descriptive flexfield?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=176867.1
Did you try to use UPLOAD_MODE=REPLACE? This option will replace your current values with the values you have in the file.
If you want to upload any new items in the file that do not currently exist in your database, use "CUSTOM_MODE=FORCE" option.
Regards,
Hussein

No concatenated descriptive flexfield value to validate.

After adding another Descriptive Flexfield, pointing to ATTRIBUTE19 in GL JE LINES ('Enter Journals:Lines'), the ADI Templates are giving me Warnings as 'No concatenated descriptive flexfield value to validate.', with a YELLOW face on all the ADI rows.
It never gave any kind of Warning before these changes (Adding / Enabling ATTRIBUTE19 length 50 in the Descriptive Flex field of GL Lines ).
Users are not happy with these messages.
Please advice me why am I getting the error and what I can do to fix this Warning.
Thank you so much,
Kiran Kesari

Hi Nel,
use a Pair type value set to achieve this. This value set should be attached to both the DFF Item Low and DFF Item High DFF attributes.
You can refer to seeded value set CST_SRS_ITEM_PAIR.
For this Pair value set the functions are define dlike this:
Event: Edit
Function
FND POPIDR CODE="MSTK" APPL_SHORT_NAME="INV"
VALIDATE="NONE" SEG=:!VALUE NAVIGATE="!DIR" REQUIRED="N"
ALLOWNULLS="Y"
Event: Validate
Function
FND VALIDR CODE="MSTK" APPL_SHORT_NAME="INV"
VALIDATE="NONE" SEG=:!VALUE REQUIRED="N" ALLOWNULLS="Y"
Hope this helps!
-Supro

Descriptive Flexfield transfer from Requisition (iProcurement) to PO

Can a descriptive flexfield be transferred from iProcurement (requisition lines) to Purchase Order (lines)?
I am fairly new to Oracle EBS and this is my first attempt to set up descriptive flexfields. We want the user to populate the field while creating the requisition and would like that value to transfer to the purchase order. (we are on 11i)
Is this possible? Is there an option or setting that I need to be aware of?
Thank you!

I don't think that is possible.
Oracle has the functionality to transfer Req. Distribution DFF to PO Distribution DFF. But it does not work for Req Header or Req Line DFF.
Hope this helps,
Sandeep Gandhi

Urgent! Change Descriptive FlexField Prompt

Hi!
I need to hide & change prompt for fields that are retrieved from Descriptive FlexField. Personalization need to be done for one responsibility.
Hiding can be done easly with Segment List.
Is there any way how I can change prompt for one responsibility.
BR
Hugo

Hugo,
To my understanding you should not be able to control the Text for various segments without changing the Flexfield definition. And if you do that it gets affected for all responsibilities.
As a suggestion you can use a Context specific to a responsibility and may be use the same combination of segments for the context. Finally data gets stored in same columns, but since u define the context separately you should be able to provide different name.
Hope that gives you clues to work on.
Regards
Sumit

Manual bank statement error: "Bank reference" field not filled

Hi,
I'm getting an error (see below) while entering details in the manual bank statement. I've checked the variant already, and the manual bank statement variant with "Bank Reference" field is already deactivated. How come FF67 still validates on this field?
Did I miss something?
Hope for your speedy reply. Thanks!
"Bank reference" field not filled
Message no. FV094
Diagnosis
An interpretation algorithm is given in transaction 003-. This algorithm interprets the value entered in the field "Bank reference" and automatically determines the items to be cleared.
The field "Bank reference" is not filled.
System Response
No interpretation will be carried out.
Procedure
Recheck your entries.

Hi,
The Bank Statement Transaction you are using has an Int. Algorithm configured, which requires the Bank reference field.
In IMG in the transaction where you create and assign business transactions to posting rules, there is also a filed for Int Algorithm. The system uses the Int Alg. to determine the fields on which to match and clear documents. The transaction you are using may have an int algo. configured which uses the reference field for clearing.
Even if you remove the reference field from the Manual Bank Statement Variant, the system is still going to look for it because that is one fields defined for clearing in the int alg.
You can change the config settings for the transaction, but either removing the Int alg. or using a different one. The description of the Int Alg. on the drop down list, will give you an idea of what fields will be used for clearing.
IMG path...FA->Bank accounting> business transactions-> payment transactions>manual bank statement-> Create and Assign business transactions.
Hope this helps.
Thanks,
Uma

DESCRIPTIVE FLEXFIELD의 REFERENCE FIELD추가방법

Similar Messages

Maybe you are looking for