Deselecting the Loupe in ACR

Posts: 57
Deselecting Loupe in ACR 5.7
« on: Today at 11:11:39 AM »
Reply Quote Modify Remove
Got a feeling that I am missing the obvious here. After I select the loupe in ACR 5.7 (in Bridge CS4 of PSE8) to view an image, I cannot deselect the loupe by clicking on the "X" in the corner of the loupe window. In fact, when I move the cursor over the image, the cursor changes from a pointer to a hand.
Can someone kindly bail me out here? Thank you.

Your talking in the Preview panel or Review mode in bridge cs4, not in the actual acr dialog?
When the cursor turns to a hand if you click and hold in the loupe, you can move the loupe around.
If you just click inside the loupe with the hand, like your selecting a menu item, the loupe should disappear.
http://help.adobe.com/en_US/Bridge/3.0/WS7049512F-0ED0-4f33-B6D9-D7B89F8F0909a.html

Similar Messages

  • Using the loupe causes preview to change

    I pull up a raw in bridge (same thing happens in the preview slideshow btw) and all is good.. but if I use the loupe to magnify once I close the magnify loupe the image totally changes. I'm guessing it's some default but I need help learning how to stop it from happening. I've checked my default for the raw images and it is NOT what I get after closing the zoom.
    Does anyone know what I am talking about?

    Laryl,
    If you really want a 100% or "1:1" sized preview of your camera's rendition of the RAW data instead of Camera Raw's rendition, then shoot in RAW+JPEG mode and put the loupe on the JPEGs.
    It's impossible to see the embedded preview in the loupe because the loop shows a 100% view, and the embedded JPEG previews are not full-size images. I suppose we could disable the loupe if you are viewing an embedded preview, but I'm not sure that would really be helpful.
    The reason that the preview is updated to the Camera Raw render after you use the loupe, even if you have the "Prefer Embedded" turned on is that once we have to generate the 100% preview to show it in the loop, we thought it was worse to have the appearance of the image in the loupe and preview mismatched.
    For example, imagine you have a file with ACR settings which convert it to grayscale, but you are browsing the file in Bridge with Prefer Embedded turned on. When the previews are initially cached you see the embedded, color preview. Then you bring up the loupe. Now, since there is no 100% embedded preview available, we have to get a high-quality preview at 100% from camera raw--which is grayscale. It looks pretty stupid (at least in my opinion) to have a loupe with grayscale pixels over a color preview, so Bridge replaces the embedded preview in the cache with a high quality (grayscale in this case) preview. Now the loupe and preview match. When you are done with the loupe, you could purge cache for the item if you really want the embedded preview to show up again in Bridge.
    The primary goal of Bridge's previews and thumbnails is to literally pre-view what the file looks like when you open it in Photoshop or Camera Raw. Since the Camera Raw dialog is not going to show you the embedded JPEG, by default Bridge doesn't either. The option to show embedded previews is primarily there to speed the editing process. You gain preview-caching speed at the expense of fidelity between the Bridge preview and Camera Raw.
    The ACR defaults only change if you change them, so you are in control of what is going on shoot to shoot. If you want to "bake" the current default into the settings for a RAW file so the appearance doesn't change when you modify the defaults again do the following...
    1. Open the files in the Camera Raw dialog.
    2. Click the Select All button in the filmstrip.
    3. Select "Export Settings to XMP" from the fly-out menu by the settings sliders.

  • How can I get hue, saturation & luminance visible in the Loupe?

    For the life of me I can't figure how to get visible in the Loupe - Hue, Saturation, Luminance as I move the Loupe around a photo.
    I can get R,G,B,L. Is there a secret to get the Hue in it? I checked preferences and even searched in Aperture Help. NO luck.
    I'm in Aperture 3.0.3
    Thanks

    It is a tad secret.
    Make sure colour value is set in the Loupe menu then:
    In the Adjustments inspector choose a color value option from the Adjustment Action pop-up menu (with a gear icon). HSB i smiling at you in that list
    Then it'll appear as a colour value in the loupe.
    BTW You'll find all this in the Displaying a Pixel Grid and Color Values section of Aperture help.
    HTH
    M.

  • Bridge CS6 How to turn off auto tone adjustment for the loupe?

    Adobe Bridge CS6. 'Apply auto tone adjustments' is unchecked in Camera Raw Preferences. Yet every time I click on an image in the preview panel it does a tonal adjustment before it magnifies the image detail. I am viewing bracketed images and do not want any auto tone applied at any time while previewing images. How can I turn off all auto tone adjustment for the program - including the loupe. I never had this issue in a previous version. I'm on PC. Thanks for any help!

    All 4 Default Image Settings are unchecked. Checking this further I have found this is only a visual issue in Bridge Preview. I have opened the same raw file before any adjustment had taken place (w/o using the loupe magnifier) in PS CS6 - and then again opened it after using the magnifier which did an auto contrast adjust on the image. Both files are the same in PS CS6. This is only a visual issue within Bridge (Master Collection CS6) on my Win7 64 bit machine. No issue with a standalone PS CS6 version on my XP 64 bit system.
    There is no auto adjustment of the image until I use the loupe (magnifier tool).
    Note my previous comment as to what happens when I use it. Thanks!
    I have a feeling this is a bug. I have a Photography help group on fb and posed this question to them. I had mostly no issue responses but got this from another person. I checked after reading this and it is the same issue with me - this only happens with raw files, not jpeg. Here is his comment line.
    Carl, I see what you mean, I have tried several adjustments to the preferences and none seem to work. The image automatically adjusts after a brief time. There does not seem to be any way to turn off the adjustment. I'm using Bridge CS 6 on a Mac. I don't think it has anything to do with camera calibration, but it only happens when using RAW files. I tried it on JPGs and TIFFs and it did not adjust the loupe image. Wonder what Adobe has to say
    So - tThanks for any thoughts! So at least it's not going to be an editing issue - but it's a pain here. I use Bridge to edit my shoots and I often shoot bracketed images. While I cull images according to the histogram, I also do visual assessment and I can't have Bridge doing it's own thing on tonal adjustment.

  • Help with creating a form, I want to add a check box to enable me to unlock certain fields and deselect the block again

    Help with creating a form, I want to add a check box to enable me to unlock certain fields and deselect the block again

    Look to the right under "More Like This". Your issue has been discussed many many times. The error you are seeing is because you do not have enough free "contiguous" space on your hard drive. Read the other threads that address this issue to find how to solve the issue.
    Or, put "The disk cannot be partitioned because some files cannot be moved" into the search box at the upper right of this page.

  • TS2830 it isn't allowing me to deselect the voice memo option, therefore i am still unable to sync my music

    it isn't allowing me to deselect the voice memo option, therefore i am still unable to sync my music

    Reset both devices.  That is always the first step.
    Now, are you running windows or Mac?

  • TS1489 8.Deselect the checkbox under Compatibility mode if it's selected.

    Deselect the checkbox under Compatibility mode if it's selected.
    thats step 8 for turning off the compatibility mode of itunes, but i dont see that checkbox. I have windows 7, and everytime i use itunes a box pops asking for me to change some setting. i dont want it to happen anymore. please help me
    thanks

    Could you post a screenshot of your compatibility tab, please?
    Open the tab. While the tab is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file. 
    Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

  • How to deselect the text when I start the program?

    how to deselect the text when I start the program?
    photo:

    wants the blue background could not be seen:
    Code Form:
    Public Class Form2
        Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        End Sub
        Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
            If ComboBox1.SelectedItem = "The Sims 4" Then
                Form3.Show()
            Else
            End If
            If ComboBox1.SelectedItem = "The Sims 3" Then
                Form4.Show()
            Else
            End If
        End Sub
    End Class
    There's a lot wrong with all of that.
    I'm sorry that I won't be able to help...
    Still lost in code, just at a little higher level.

  • Distribution Cycle KSV5 Resulting in error when deselected the test run chk

    Hi Experts,
    Please help me out
    iam getting an error while running a Distribution Cycle KSV5 Resulting in error when deselected the test run chk box.
    When run the same in the test run, there isn't any error log. but when i deselect the same & run iam getting an error like
    First Message:
    Balance per segment 9999 is not zero
    Message no. FAGL_COFI025
    Diagnosis
    Balance per segment 9999 is not zero.
    The balance on segment 9999 is 50.00 (transaction currency), 0.00 (object currency), and 50.00 (controlling area currency).
    System Response
    With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
    Procedure
    If there is a programming error, please inform your system administrator.
    If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
    2nd Message
    Balance per segment 1000 is not zero
    Message no. FAGL_COFI025
    Diagnosis
    Balance per segment 1000 is not zero.
    The balance on segment 1000 is 50.00- (transaction currency), 0.00 (object currency), and 50.00- (controlling area currency).
    System Response
    With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
    Procedure
    If there is a programming error, please inform your system administrator.
    If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
    3rd Message
    No update performed due to an error
    Message no. GA719
    Diagnosis
    A serious error occurred during processing.
    System Response
    Processing is continued as far as possible, but results are not posted.
    Procedure
    This error is shown in the error list before this error message. Here you can find more information about this particular error.
    I would appreciate an early reply........!!!
    Thanks & Regards,
    Neela

    Hi,
    Check notes 764652 and 897086; it might be helpful.
    Regards,
    Eli

  • How to deselect the itemlistbox entries

    hi,
        using itemlistbox for currency display, once user select the value and press the save button.
    In itemlistbox value want to be deselect. while am using invalidate() method it clearing the value in listbox .
    i don want to clear just deselect the entries
    how to achieve this.
    Regards
    Kishore

    Invalidate refreshes the complete node....
    try with IF_WD_CONTEXT_NODE->CLEAR_SELECTION

  • I'm asked to deselect the GR indicator for ZNPP purchase orders using BADI.

    Hi Experts,
    I'm asked to deselect the GR indicator against ZNPP purchase orders created from SRM using BADIs
    BAdI BBP_CREATE_BE_PO_NEW ,BBP_CREATE_BE_RQ_NEW  and FILL_PO_INTERFACE1  and FILL_RQ_INTERFACE  methods respectively.
    Can you please give me idea what I can do with this..
    Im unable to find the field name(WEPOS) for GR indicator.
    Please help me out..today is the deadline for me.

    These BADI's are in SRM not in ECC. Check the interface parameters of those badi methods. you will find some option to pass. if not you have to do it in ECC only.

  • Disabling the Loupe

    I don't know if it's just me but I find the loupe in Bridge pretty annoying. (I can see photographers with masses of photos enjoying it, but I know what's in my images).
    Is there any way to disable it? Anytime I click on the preview up pops the loupe, and it's visually annoying. I haven't found anyway to get rid of the loupe other than going up a level and back and that's just silly.
    Bridge help says:
    To display the Loupe tool, click a selected image in the Preview panel.
    To hide the Loupe tool, click it.
    Click it? What, the loupe? Doesn't do anything.
    Bridge help also gives the key command for activating it, but not to stop it.
    I know it shouldn't be a big deal, but it bugs me floating around on my image.
    Any help greatly appreciated.
    Cheers, Angus

    Hi Olaf, I don't know if you have experience with a pen, but when you move it sometimes the nib will touch the tablet and that acts as a click. It's much more sensitive than a mouse click. And sometimes you can't avoid that when you work quickly. In all other programmes this isn't a problem because you can choose your tool, or deactivate your tool, but in Bridge your Loupe "Tool" is always "on".
    i And a single left-click inside the loupe ( anywhere inside the loupe) will hide it immediately.
    As I said above that works fine if you use a mouse but not with a Wacom. And please don't try and say the tablet is at fault. I use these tablets 8-9 hrs a day since years, and never once had a problem.
    Cheers, A

  • Adobe Reader deselects the pen tool after making a single mark. How do I fix this?

    I have a Surface Pro 2 tablet that deselects the pen tool after I make any kind of mark with it. It works occasionally with the mouse but not the stylus. For example, if I were to write a "41", I'd have to make one stroke, then select the pen tool, and then make the other stroke  to complete the "4", select the pen tool again, and then write the "1".
    The Adobe Reader is updated to the latest firmware (11.0.10).

    Wow lol I think that might have been the issue I pressed it a few times and it stopped, thank you!

  • Fixing the loupe tool position while making adjustments

    I haven't found a way to do this - maybe it's an enhancement - but just in case ....
    Is there a way to fix the loupe in position while making adjustments (ex. noise and sharpness)? I'd like the loupe to display real-time the results of the adjustments being made.
    I checked the manual but didn't see anything. Is it do-able or is it future?
    Thank you.

    I haven't found a way to do this - maybe it's an
    enhancement - but just in case ....
    Is there a way to fix the loupe in position while
    making adjustments (ex. noise and sharpness)? I'd
    like the loupe to display real-time the results of
    the adjustments being made.
    I checked the manual but didn't see anything. Is it
    do-able or is it future?
    Actually right around the time of 1.0.1 a number of people were asking for this - I also submitted a suggestion to see it as well.
    Currently the closest thing you have is to zoom in on a specific area at 100% and evaluate that region while making changes. That works pretty well, but with larger images 100% is not quite close enough.
    There are two ways to fix that I think, allow the user to define what the "100%' zoom really is, or allow the user to have multiple sticky loupes they could leave on an image.

  • I need to find the download for ACR 7.3 to use my nikon d600 raw files. i have cs5 running on macboo

    i need to find the download for ACR 7.3 to use my nikon d600 raw files. i have cs5 running on macbook pro with mountain lion OS.

    Hi,
    Unfortunatly the 7.x series of camera raw plugin is not compatible with photoshop cs5.
    You could download the 7.4 DNG Converter and convert your d600 files to dng copies which then photoshop cs5 will open.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5568

Maybe you are looking for