Deserialization failed: Value was either too large or too small for an Int32.
hi all
I'm getting below error when I click on Properties of Datasource in Sql server analysis server;
kindly help me.
Hi BI_group,
First, please ensure that you have the permission to view the data source of the cube. And then under C:\Program Files\Microsoft SQL Server\MSSQL.4\OLAP\Log (this could be different for your server), there are 3 log files that are generated:
msmdrrv.log
FlightRecorderCurrent.trc
FightRecorderBack.trc
The msmdrrv.log simply points to the other two logs. There might be some detail information for this error.
Besides, you can restart the server and then check if this issue persists or not.
If the issue persists, please post the detail error message on the error log, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support
Similar Messages
-
Azure + Sync Framework + Error: Value was either too large or too small for a UInt64
Hi,
We have an in-house developed syncronisation service built on the Sync Framework v2.1 which has been running well for over 2 years. It pushes data from a local SQLServer 2005 database to one hosted on Azure with some added encryption.
The service was stopped recently and when we try to re-start it, it fails with the error:
System.OverflowException: Value was either too large or too small for a UInt64.
at System.Convert.ToUInt64(Int64 value)
at System.Int64.System.IConvertible.ToUInt64(IFormatProvider provider)
at System.Convert.ToUInt64(Object value, IFormatProvider provider)
at Microsoft.Synchronization.Data.SyncUtil.ParseTimestamp(Object obj, UInt64& timestamp)
at Microsoft.Synchronization.Data.SqlServer.SqlSyncScopeHandler.GetLocalTimestamp(IDbConnection connection, IDbTransaction transaction)
I have found the Hotfix 2703853, and we are proposing to apply this to our local server, but we have found that running SELECT CONVERT(INT, @@dbts) on the local database returns 1545488692 but running the same query on the Cloud database returns -2098169504.
which indicates the issue is on the Azure side. Would applying the hotfix to our local server resolve the issue or would it need to be somehow applied to the Azure server?
Thanks in advance for any assistance!
ChrisHi,
We have now applied the Sync Framework hotfixes to our server and re-provisioned the sync service. No errors were reported and the timestamp values were all within the required range. On re-starting the service the system worked as anticipated. It has now
been running for a week and appears to be stable. No further changes were required other than installing the hotfixes and re-provisioning the scope.
Chris -
ODT error in VS2005: Value was either too large or too small for an Int32
Using ODT's Oracle Explorer in VS2005 I connected to a 3rd party's Oracle9i database that's been around for a while. I expanded the tables node and then attempted to expand a specific table. It then displayed a popup message and never expanded the table so I could manage the columns.
The error is:
An error ocurred while expanding the node:
Value was either too large or too small for an Int32
I recreated the table, with no data, in another database (same version of oracle, different physical server) and was able to expand the table in ODT's Oracle Explorer.
I went back to the other database in Oracle Explorer and tried to expand the table and it failed with the same error message.
The only difference I can see is that the first table contains ALOT of data (gigabytes), while the other table (the duplicate I created to duplicate the error) does not have any data.
here's the definition of the table minus the actual table and field names.
FLD6 contains jpg data from a 3rd party Oracle Forms application. The jpg data is between 100K and 20MB.
CREATE TABLE myTable
FLD1 VARCHAR2(30 BYTE),
FLD2 VARCHAR2(15 BYTE),
FLD3 VARCHAR2(20 BYTE),
FLD4 VARCHAR2(20 BYTE),
FLD5 NUMBER(3),
FLD6 LONG RAW,
FLD7 VARCHAR2(80 BYTE),
FLD8 DATE,
FLD9 VARCHAR2(20 BYTE),
FLD10 VARCHAR2(20 BYTE),
FLD11 VARCHAR2(99 BYTE),
FLD12 VARCHAR2(256 BYTE)
TABLESPACE myTableSpace
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 2048M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
NOMONITORING;
This is just to let the developers know I ran into a problem. I've already gotten around the issue by using an alternative tool.Hi,
You can also use the Map TestTool to test your maps. It uses the BizTalk engine to execute the map. You can select a map that is deployed to the GAC en execute it.
You can download the sample tool with the source code here:
TestTool for BizTalk 2013
http://code.msdn.microsoft.com/Execute-BizTalk-2013-maps-e8db7f9e
TestTool for BizTalk 2010
http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
Kind regards,
Tomasso Groenendijk
Blog
| Twitter
MCTS BizTalk Server 2006, 2010
If this answers your question please mark it accordingly -
BizTalk Map error. Can you please suggest what could be the reason for this.
Hi,
You can also use the Map TestTool to test your maps. It uses the BizTalk engine to execute the map. You can select a map that is deployed to the GAC en execute it.
You can download the sample tool with the source code here:
TestTool for BizTalk 2013
http://code.msdn.microsoft.com/Execute-BizTalk-2013-maps-e8db7f9e
TestTool for BizTalk 2010
http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
Kind regards,
Tomasso Groenendijk
Blog
| Twitter
MCTS BizTalk Server 2006, 2010
If this answers your question please mark it accordingly -
Dear Community,
I'm synchronising my T3 with two PCs. One with Vista & Outlook 2007 and the other with XP & Outlook 2003. Both with the latest conduit & Hotsync Manager versions installed for each OS based on the availability on the Palm Website.
My problem is that when I synchronise the T3 with either PC and then try to sync it with the other I'm receiving the following error message for the Calendar:
Outlook Calendar
The passed buffer is too small for the reply data.
OLERR:0D-0008
OLERR:0D-0004
OLERR:0D-0001
- Slow Sync
Outlook Calendar synchronization failed
The second time the sync is successful but takes a long time and the actual problem is that it creates duplicates for records previously changed on either PC - but with a sync in between those changes, i.e. no conflict in the sense that the same record was changed in both environments since the last sync. I have configured the conflict handling to establish a hierarchy PC1-T3-PC2 but try to avoid them by synchronising as often as possible.
Has anyone come across that problem or any ideas? Can you somehow adjust the buffer size for the sync? I have been using Lotus Organiser & then the various Outlook versions for a number of years.
Thank you
Rainer
Post relates to: Tungsten T3
Post relates to: Tungsten T3As they say on TV, "Doh"!!!
I figured out the problem. I started the Sync tool, selected "Settings", then "Mcrosoft Outlook" tab and then "Select Folders" button. I browsed to the proper folders in Outlook (Calendar, Tasks, etc). Select OK enough times and retried the sync.
It worked. -
Host Agent Service critical - Paging file is too small for this operation to complete
Hi all,
at the moment I have the problem that some of my hosts get in the errorstate critical in VMM 2012 SP1.
The error details in VMM are:
Error (2912)
An internal error has occurred trying to contact the hostname server: : .
WinRM: URL: [http://hostname:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_Service], Filter: [select * from Win32_Service where Name="scvmmagent"]
The paging file is too small for this operation to complete (0x800705AF)
Recommended Action
Check that WS-Management service is installed and running on server hostname. For more information use the command "winrm helpmsg hresult". If hostname is a host/library/update server or a PXE server role then ensure that VMM agent is installed
and running.
On the host i cannot connect to FailoverCluster or Hyper.V Manager. After a restart of the host the Problem is gone and the System is working without any Problems for some days.
The paging file is set to 4GB and the OS is Server 2012.
The hosts have 192GB of RAM.
The configuration of the pagfile didn't change from Windows 2k8R2 to 2012.
I didn't find any Errors in the eventlog. Do you have any idea where to check for that?
Thanks,
PatrickThe hotfix didn't solve the Problem for me either. The WMI crash came again after a couple of weeks.
An additional problem with VDS was detected and the following hotfix was installed:
http://support.microsoft.com/kb/2884597/en-us
Also a problem with Clusterservice was found, sadly MS is tagging this handle leak as "won't fix".
Nevertheless one WMI Instance is still growing...
We are testing a hotfix that so far looks promising. Its a private hotfix only right now. But the file is listed as KB494704 you may want to ask your support engineer to look into it. -
"buffer too small for string or missing null byte" inserting CR in excel
I have created a Crystal Report based on below stored procedure.
DELIMITER $$
DROP PROCEDURE IF EXISTS `ww_test`.`PRD_Data_sp` $$
CREATE PROCEDURE `ww_test`.`PRD_Data_sp` (in cyear int, in cmonth int, in groupby varchar(20), in Inv_type varchar(4))
BEGIN
select
CASE WHEN groupby='Date' THEN (p.FKDAT)
WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
END ,
sum(p.QTYSAM),
sum(p.CASESSOLD),
sum(p.SOLDDOL)
from ww_test.prd_data p
where (month(p.FKDAT)=cmonth and year(p.FKDAT)=cyear) and
((p.FKART) is null or not(p.FKART in ("FAZ","ZMBB","FAS",Inv_Type))) and
((p.AUART) is null or not(p.AUART in ("ZMBB")))
Group by
CASE WHEN groupby='Date' THEN (p.FKDAT)
WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
END
Order by
CASE WHEN groupby='Date' THEN (p.FKDAT)
WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
END;
END $$
DELIMITER ;
I have used Add Command to create report based on this.
call ww_test.prd_data_sp({?Year},{?Month},{?GroupBy},{?InvType});
I am able to refresh the report in crystal and as well in Infoview without any problem.
But when i try to insert this report in Excel using Live Office it gives me error. I able to insert other crystal reports without any problem.
An error occurred while opening the report. The report does not exist; you have insufficient rights to open the report; or you cannot make a connection to the BusinessObjects Web Service. (LO 02010)
Failed to open report (LO 26619)
Cannot open report document
Buffer too small for string or missing null byte.
can anyone suggest where i am going wrong? Any input is appreciated.
Crystal Reports 2008
Live Office XI 3.1
BOEdge XI 3.1
Xcelsius 2008
Thanks ,
MadhaviWith the CurrentValue method
Crpt.ParamFields[3].CurrentValue := memo1.Text;
Is there another solution ? -
Buffer too small for string - Crystal Report for Vs2010
Hello,
I have recently upgrade my VS2010 project to Crystal Report for Visual Studion 2010.
I have some reports that contains more than 512 characters in the Report Comments section.
When I try to do a RptDoc.SaveAs(vPath, false) the following error is raised:
Buffer too small for string or missing null byte.
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.SaveAs in :line 0
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.SaveAs in :line 0
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SaveAs in :line 0
This line SaveAs was working has expected with Crystal Report 2008. Any idea on why it is not working anymore.
Thank you.
CharlesHello Don,
I have start a little project to retest the behavior.
I have create a new report in Crystal Report 2008 just by clicking New, Finish and Save.
In a new Windows Application in Vs2010 ,I have added the following Crystal Report Reference.
CrystalDecisions.CrystalReports.Engine, Version=13.0.2000.0
CrystalDecisions.Shared, Version=13.0.2000.0
I have then try the following code and found out the limit of ReportComment is 511 but in the Crystal Report 2008 designer and runtime the limit did not apply.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim objRpt As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
Dim i As Integer = 0
Try
objRpt.Load("c:\temp\empty.rpt", CrystalDecisions.Shared.OpenReportMethod.OpenReportByTempCopy)
Do
i += 1
objRpt.SummaryInfo.ReportComments = New String("X", i)
Loop
objRpt.SaveAs("c:\temp\dfh_save.rpt", False)
Catch ex As Exception
MsgBox("i: " & i)
MsgBox(ex.Message)
End Try
End Sub
I am able to put has many characters if I insert the report in the Vs2010 Solution.
If you prefer I can send you my little project.
Thank you.
Charles
<code> should be
Edited by: Don Williams on Feb 4, 2011 12:47 PM -
Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
Hi All,
I am trying to implement Oracle 10g RAC on my laptop using vmware and openfiler software . But while executing the command
#mkfs.ocfs2 -b 4K -C 32K -N 4 -L oracrsfiles /dev/iscsi/crs11/part1
I am getting the error
Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
Please anybody can help me to resolve this problem.
Thanks in Advance.How large is the device that you are formatting?
The default journal size depends on the type specified. If none specified,
then it assumes "mail" which sets the default journal per slot to 256M.
If database type, default is 64M.
Use "-T database" to specify database type, etc.
BTW, one can always override the defaults. Say "-J size=16M" to make
a smaller journal.
man mkfs.ocfs2 and the user's guide has more. -
Paging file is too small for this operation to complete.
iTunes wont open. When I click on it, all it says is 'Paging file is too small for this operation to complete. Please help =)
Now it says Aplication Error - The aplication failed to initialize properly (0xc000012d)
-
Default text size in Compressor is too small for normal human eye
Is there any way to change the text size in Compressor 4 in the windows? I can't find any.
The normal default text size is way too small for any normal human being eye to read clearly.
Please, have mercy on us, whoever designed the tiny fonts! Not fair to the rest of us . . .Well, guess we folk with not-too-good vision will simply have to keep on trucking the best we can, eh? We can't enlarge text, so as a result we can't use software like Compressor like the rest of the population. Sad to say, especially with a company like Apple . . .
Yeah, well I gave the Apple Compressor Team my feedback, just like I've done the last 3 months with other things, then of course the feedback from us all melts into the either, and we never really know if anyone reads it, like they say. Me thinks not. This is the only feedback I'll ever get, I'm afraid:
QUOTE:
Thank you for your feedback on Compressor.
We cannot respond to you personally, but please know that your message has been received and will be reviewed by the Compressor Team. If we need to follow up with you on your ideas for improving Compressor, we will contact you directly.
We appreciate your assistance in making Compressor better.
Compressor Team
Apple -
How can I perform the conversion of .pdf files in Cyrillic script to Word files in Cyrillic script. The .pdf file is too small for me to read without a magnifying glass, and the document is more than one thousand pages.
This answer was not helpful. First of all, I could not find "tech specs"
anywhere on the Acrobat 11 homepage. And secondly I purchased this software
for the specific purpose of converting .pdf files to Word. It was only
after I had completed the purchase that I learnt that Acrobat does not
permit the conversion of .pdf files in Cyrillic to Word files in Cyrillic.
I feel that Acrobat should have provided this crucial information before I
allowed my credit card to be debited. That is why I am now asking for my
money back. But thanks for your attempt to solve my problem, even if it was
not successful.
Julyan Watts -
Printer gives me an error message saying a 3 1/2 X 6 1/2 envelope is too small for job. However, I can print other envelopes with no problem. ex. 4 1/2 X 10. Printer model is a C6280.
Set-up a custom envelope with the size that you need.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion
Hi all,
the following query select to_char(nvl(round(pc.target_cost*xx_primavera.geteurtolvrate,2),amount),'FM999G999G999G999G990D00') detail_amount,
nvl(ct.cost_type, description) detail_description,
tm_desc.memo_id,
primavera_prj_name detail_prj_name,
hp.party_number detail_party_number,
xpid.interface_line_attribute1,
utl_i18n.unescape_reference(replace(regexp_replace(utl_raw.cast_to_varchar2(tm_desc.task_memo), '<[^>]*>'), chr(13)||chr(10))) document_description,
REPLACE(regexp_replace(utl_raw.cast_to_varchar2(tm_id.task_memo), '<[^>]*>'), chr(13)||chr(10)) prim_memo_client_id
from XX_PRIMAVERA_INVOICES_DETAIL xpid
join admuser.xx_ar_hz_parties xahp on xahp.orig_system_bill_customer_id = xpid.orig_system_bill_customer_id
join hz_parties hp on hp.party_id = xahp.party_id
left join admuser.projcost pc on pc.proj_id = xpid.primavera_prj_id and pc.cost_type_id != 29 and xpid.service_code = 8 and pc.task_id = xx_primavera.getTaskId(xpid.primavera_prj_id,'A1020', 'Изготвяне на оферта') and delete_session_id is null
left join admuser.costtype ct on ct.cost_type_id = pc.cost_type_id
left join admuser.taskmemo tm_id on tm_id.proj_id = xpid.primavera_prj_id and tm_id.memo_type_id = 53 and tm_id.task_id = xx_primavera.getTaskId(xpid.primavera_prj_id,'A1020', 'Изготвяне на оферта')
left join admuser.taskmemo tm_desc on tm_desc.proj_id = xpid.primavera_prj_id and tm_desc.memo_type_id = 55 and tm_desc.task_id = xx_primavera.getTaskId(xpid.primavera_prj_id,'A1020', 'Изготвяне на оферта')
where amount != 0
and xpid.interface_line_attribute1 = :ra_ctp_attribute1
ORDER BY xpid.primavera_prj_name, xpid.description;returns error:
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 2371, maximum: 2000) I found that the error occurs in the row : utl_i18n.unescape_reference(replace(regexp_replace(utl_raw.cast_to_varchar2(tm_desc.task_memo), '<[^>]*>'), chr(13)||chr(10))) document_description,and tried to change it to: utl_i18n.unescape_reference(replace(regexp_replace(utl_raw.cast_to_varchar2(dbms_lob.substr(tm_desc.task_memo,1,2000)), '<[^>]*>'), chr(13)||chr(10))) document_description,....but it returns not value for that field... am i using dbms_lob.substr at the wrong place? The column 'tm_desc.task_memo' is BLOB type.
Any ideas how to cheat it ?
Version: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
PL/SQL Release 11.1.0.7.0 - Production
"CORE 11.1.0.7.0 Production"
TNS for Linux: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - ProductionThanks in advance,
Bahchevanov.Your second example has the parameters reversed. The amount (length) comes first and then the offset:
DBMS_LOB.SUBSTR (
lob_loc IN BLOB,
amount IN INTEGER := 32767,
offset IN INTEGER := 1)
RETURN RAW;
DBMS_LOB.SUBSTR (
lob_loc IN CLOB CHARACTER SET ANY_CS,
amount IN INTEGER := 32767,
offset IN INTEGER := 1)
RETURN VARCHAR2 CHARACTER SET lob_loc%CHARSET;
DBMS_LOB.SUBSTR (
file_loc IN BFILE,
amount IN INTEGER := 32767,
offset IN INTEGER := 1)
RETURN RAW;Also, remember that # of bytes is not necessarily the same as the # of characters depending on your character set. So 2000 bytes might become 4000 characters. And you have to make sure the BLOB is actually character data and not arbitrary binary data.
Post the results of reversing the parameters and using a smaller chunk size. -
ORA-22835: Buffer too small for CLOB to CHAR on Solaris but not Windows
Hi,
I get the following error on Solaris but not Windows equivalent 10.2 installations
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 4575, maximum: 4000)
ORA-06512: at line 65
the code causing the problem is:
SELECT A.TABLE_NAME, A.DEFAULT_DIRECTORY_NAME, B.LOCATION,
CASE
WHEN INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')<>0 THEN
SUBSTR(A.ACCESS_PARAMETERS,INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')+14,3)
ELSE NULL
END RSZ FROM USER_EXTERNAL_TABLES A, USER_EXTERNAL_LOCATIONS B
WHERE A.TABLE_NAME = B.TABLE_NAME(+);
the entire code being executed is:
DECLARE
EX BOOLEAN;
CNT NUMBER;
SQL1 VARCHAR2(4000);
FLEN NUMBER;
BSIZE NUMBER;
TABNAME VARCHAR2(4000);
DEFDIR VARCHAR2(4000);
RSZ VARCHAR2(4000);
ECODE NUMBER(38);
ERRMSG VARCHAR2(4000);
CURSOR C1 IS
SELECT A.TABLE_NAME, A.DEFAULT_DIRECTORY_NAME, B.LOCATION,
CASE
WHEN INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')<>0 THEN
SUBSTR(A.ACCESS_PARAMETERS,INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')+14,3)
ELSE NULL
END RSZ FROM USER_EXTERNAL_TABLES A, USER_EXTERNAL_LOCATIONS B
WHERE A.TABLE_NAME = B.TABLE_NAME(+);
TYPE C1_TYPE IS TABLE OF C1%ROWTYPE;
REC1 C1_TYPE;
BEGIN
OPEN C1;
FETCH C1 BULK COLLECT INTO REC1;
FOR I IN REC1.FIRST .. REC1.LAST
LOOP
UTL_FILE.FGETATTR(NVL(REC1(I).DEFAULT_DIRECTORY_NAME,'CARDSLOAD'),
REC1(I).LOCATION, EX, FLEN, BSIZE);
IF EX THEN
IF INSTR(TO_CHAR(REC1(I).RSZ),'\.')<>0 THEN
DBMS_OUTPUT.PUT_LINE('INVALID RECORDSIZE OR CORRUPTED FILE');
END IF;
DBMS_OUTPUT.PUT_LINE('Table Name: ' || TO_CHAR(REC1(I).TABLE_NAME));
DBMS_OUTPUT.PUT_LINE('File Exists '||REC1(I).LOCATION);
DBMS_OUTPUT.PUT_LINE('File Length: ' || TO_CHAR(FLEN));
DBMS_OUTPUT.PUT_LINE('Record Size: ' || TO_CHAR(REC1(I).RSZ));
DBMS_OUTPUT.PUT_LINE('Block Size: ' || TO_CHAR(BSIZE));
DBMS_OUTPUT.PUT_LINE('# RECORDS: ' || FLEN/TO_NUMBER(REC1(I).RSZ));
BEGIN
CNT:='';
SQL1:='SELECT COUNT(*) FROM '|| REC1(I).TABLE_NAME;
EXECUTE IMMEDIATE SQL1 INTO CNT;
DBMS_OUTPUT.PUT_LINE('SELECT COUNT FOR: ' || REC1(I).TABLE_NAME||' = '||CNT);
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('SELECT COUNT FAILED FOR: ' || REC1(I).TABLE_NAME);
ECODE := SQLCODE;
ERRMSG := SQLERRM;
DBMS_OUTPUT.PUT_LINE(ECODE||' '||ERRMSG);
END;
ELSE
DBMS_OUTPUT.PUT_LINE(REC1(I).TABLE_NAME||' '||REC1(I).LOCATION||' File Does Not Exist');
END IF;
DBMS_OUTPUT.PUT_LINE('-----------------------------------------------------');
END LOOP;
CLOSE C1;
EXCEPTION
WHEN OTHERS THEN RAISE;
END;
Any ideas why Solaris but not Windows would have this problem?
Thanks,
VictorCheck out Bug 4715104 - ORA-22835 / truncated data from USER/ALL/DBA_EXTERNAL_TABLES
Maybe you are looking for
-
For some reason when I click on month view Ical dissapears. The Ical tool bar at the top remains but thats it. Any ideas?
-
Adobe air on Windows phone 10 ?
Hi all, Windows phone is more and more popular every day. I still haven't bought a windows phone only because Adobe AIR is not supported on it. Do we have any idea if Adobe will release adobe AIR on windows phone in the future ? (maybe with windows 1
-
How to fill an empty cell with the value above
Hello, Please help me on the following issue related to BEx query and it's output in BEx analyzer as well as on Web. I am trying to modify a query output where the empty cells are to be filled with the value in the above cell. e.g. there is a column
-
HELP! Network printing and installing HPIJS on iBook running 10.3.9
Hi, I have a home network built around Time Capsule. I have a secondary router which provides a wireless B/G network. I have an old iBook running 10.3.9 which connects to the wireless B/G network. I used to have an old HP PSC 750 connected via USB to
-
Hi, I'm currently studying for SCJP exam and am confused about the following code. public static void main(String[] args) { TreeMap myMap = new TreeMap(); myMap.put("ab", 10); myMap.put("cd", 5); myMap.put("ca", 30); myM