Design and Sizing Document for CUCM 8.x

HI Team,
Guys i need Sizing and Design Document for CUCM 8.x.
There is a new client and we need to do the sizing and design for that client on CUCM 8.x platform.
Request you to assist me with document. I need a document which will give me the sizing and design viewpoints.
I am sure there would so many guys who would have done this already.
Awaiting your reply asap.
Rgds,
JF

Cisco Unified Communications System 8.x SRND
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/uc8x.html
HTHjavaIf this helps, please ratewww.cisco.com/go/pdihelpdesk

Similar Messages

CS 6 Design and Web Premium for Windows - convert to Mac compatible version?

Hi
I bought CS 6 Design and Web Premium for Windows. I now have an iMac. Please advise on how I get the Mac version.
Thanks

Order product | Platform, language swap

Design and Testing Suggestions for Different Screen Resolutions

Intermediate Dreamweaver CS3 user, in need of "Design and Testing Suggestions for Different Screen Resolutions".
Thank you, J. Chavez

Adobe Browser Labb and BrowserShots.org

Different value in sales order and billing document for one line item

Hi Experts,
User created a sales order with three line items say line item 10, line item 20, line30 and he did the delivery and billing also. Line item 10 value is 5024.26 EUR in Sales order
At the time of billing the value of a line item 10 is increased by 0.02 i.e. 5024.28
I asked the user cancel that invoice and the post goods issue. He cancelled the invoice and post goods issue. Then he created the PGI and billing now the value of line item decrease by 0.01(5024.27) again he cancelled the invoice and post goods issue. he created the post goods issue and billing. Now the value is correct i.e. 5024.26.
User is asking me the reason can any one help me in this
Note: price is copying from delivery to billing

Morning Sunina
Now consider this scenario
Item a - 10
Item b - 20
Item c - 30
and the validity of condition rec for item C is 31st of Jan
after 31st JAN the record changes or there isn't any.
In Copy control the pricing type is 'B' i.e., carry out new pricing.
Now if the document is created in January it will take all the above prices. and this document is then billed in Feb. Now the copycontrol, whilst copying the prices, will predetermine the same.
Now your task is to check if there was user intervention, check the pricing in order and check what condition types got affected in order and in billing.
If your scenario is still not amongst the above cases...
I don't know what to do, if you figure out please let us also know, god know when we would face the same scenario....
Take care

Difference amount in sales order and billing document (For one line item)

Hi Experts,
User created sales order with 3 line items and billing document. but problem is that there is difference in value of sale order and billing only for line item 10. The remaining items values are same in sales order & billing doc.if I check in sales order condition I found that VPRS condition is used and the value is 692.13and the amount is 3245.26in sales order. But if suppose I check the same value in billing doc the value is 0.69 and the amount is 3245.28. Can u suggest me which configuration I have to check for this.
I also checked change lock but there is no change in sales and billing document & Material
Regards
Sunina agarwal

Morning Sunina
Now consider this scenario
Item a - 10
Item b - 20
Item c - 30
and the validity of condition rec for item C is 31st of Jan
after 31st JAN the record changes or there isn't any.
In Copy control the pricing type is 'B' i.e., carry out new pricing.
Now if the document is created in January it will take all the above prices. and this document is then billed in Feb. Now the copycontrol, whilst copying the prices, will predetermine the same.
Now your task is to check if there was user intervention, check the pricing in order and check what condition types got affected in order and in billing.
If your scenario is still not amongst the above cases...
I don't know what to do, if you figure out please let us also know, god know when we would face the same scenario....
Take care

Capacity sizing document for Forms on iAS(Oracle Application Server)

Hi,
I need to know from where I can get Capacity planning document for Forms on Oracle Application Server for Intel/Solaris/Aix arch.Please Advise.
Regards,
Noman

Hi,
we have several developers working with developer suite 10g. Our OAS runs on Linux as yours. All our developers work locally using windows-pc's. We have a samba share we use to move the developed sources to the linux box. On the linux box with have some scirpts to compile the sources and move them to the runtime-directory.
The final integration test in then done using the installed application on the oas.
This works without having any problems for more two years now.
btw: Be aware of the problems you will run into when moving an application from windows to linux:
-> All filename ar Case-sensitive
-> the writing of module-names in OPEN_FORM, NEW_FORM, CALL_FORM must match exactly the filename (in other words: call_form, open_form and new_form is also case-sensitive
-> Attached librarys are also case-sensitive, even if there are shown in uppercase in the module-navigator.
hope this helps.
Edited by: aweiden on 08.11.2008 18:05

Can I enable menu for base document and target document for user forms

Hello friends
I want to add Base and target document functionality for our addon
but when i do this
oform.EnableMenu("5899", True) ' 5899 is menu uid for target document
i got this exception
Menu - Not found [66000-27]
Is there another way around
Thanks in advance ....
Atul

Atul try adding this to ur form Xml schema and specify the userdatasrc(bold text) for the form as well..
<item uid="10000329" type="113" left="475" tab_order="0" width="90" top="481" height="19" visible="1" enabled="0" from_pane="0" to_pane="0" disp_desc="0" right_just="0" description="" linkto="" forecolor="-1" backcolor="-1" text_style="0" font_size="-1" supp_zeros="0" AffectsFormMode="1">
 <AutoManagedAttribute />
 <specific AffectsFormMode="1" TabOrder="0">
 <ValidValues>
 <action type="add">
 <ValidValue value="A/R Credit Memos" description="14" />
 </action>
 </ValidValues>
 <databind databound="1" table="" alias="SYS_312" />
 </specific>
 </item>
 <item uid="10000330" type="113" left="380" tab_order="0" width="90" top="481" height="19" visible="1" enabled="1" from_pane="0" to_pane="0" disp_desc="0" right_just="0" description="" linkto="" forecolor="-1" backcolor="-1" text_style="0" font_size="-1" supp_zeros="0" AffectsFormMode="1">
 <AutoManagedAttribute />
 <specific AffectsFormMode="1" TabOrder="0">
 <ValidValues>
 <action type="add">
 <ValidValue value="Sales Quotations" description="23" />
 <ValidValue value="Sales Orders" description="17" />
 <ValidValue value="Deliveries" description="15" />
 </action>
 </ValidValues>
 <databind databound="1" table="" alias="SYS_313" />
 </specific>
 </item>

Does the Design and Web Premium for students program for Mac allow multiple downloads on other Mac computers? Can this program be upgraded to be used on windows as well?

I am a university student that requires a second computer. However, I do not want to purchase a second Adobe Suite Design and Web Premium Program. Does this program allow for multiple downloads? I have a Mac laptop, and I bought the Mac version of the program, is there a way to upgrade it to use it on windows? Or will it only download on a Mac device?

Chances are your license is only for the Mac platform.
You are not really limited in the number of times you might download - just the number of installations you can have activated. You can have activated installations on two machines, though they both have to be running the same platform. If it is CS6 you can request a platform swap,but that doesn't sound like what you wish to do.

How to prepare SRS and FS documents for a GxP critic processes

Hello,
We are a pharma company and we want to seperate SRS and FS documents whose processes are GxP critic or non-GxP.
Are there any standards to follow or samples? How should each document be prepared?
I would greatly appreciate any advice.
Thank you.
Altin

Hi Ali_Sampras ,
1. For a POC you might want to go for Evaluation [ option 0 ].
2. Execute ./vda-install ,reboot your server .
Once the server is up , execute ./vda-config and select option 0
You will have an evaluation setup up and running.
3.
-> You can use option 1/2 for a production setup ,high availability/fail over purpose i.e if you have 3 or more servers.
-> option 3 when you have license to use InnodB engine and have only one server.[here before executing ./vda-config you need to install/configure Innodb on the VDI host] .
-> option 0 when you have a single server and don't require fail over .
HTH ,
Udaya

Need performance and sizing document

Hi Experts,
Pls provide me some materials regarding performance and sizing topic in Input Enabled Queries and planning applications Competency to know abt it .

BW Query Performance
Query Executime time ?
Precalculated Value Set
BW Performance Tuning Knowledge Center - SAP Developer Network (SDN)
Business Intelligence Performance Tuning
performance docs on query
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/064fed90-0201-0010-13ae-b16fa4dab695
weblog
Query Creation Checklist
Query Optimization
https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=cube+size&objid=c4&daterange=all&numresults=15
cube size
Message was edited by:
hari kv

Test Plan and UAT document for LYNC 2010

Hi,
Is there Microsoft Technet Link for Test plan and User acceptance test document post implementation/migration?
Thanks
jitender

Hi jitender,
Yes, you can use Lync Rollout and Adoption Success Kit (RASK) .
The Lync Rollout and Adoption Success Kit (RASK) provides an easy-to-follow, end-to-end framework for rolling out Lync 2013 within an organization. Inclusive of checklists, best practices, and key resources, Lync 2013 RASK offers guidance and resources to
help achieve maximum results with your Lync rollout.
For more details about Lync Rollout and Adoption Success Kit (RASK):
http://blogs.technet.com/b/nexthop/archive/2013/04/19/introducing-the-lync-2013-rollout-and-adoption-success-kit-rask.aspx
Best regards,
Eric

Basic schema design and security mechanisms for slowing down bandwidth

Hi to all!
At first I am sorry for a lot of noob questions - I am just beginner in networking.
I have LAN with 1 SW (cisco catalyst 2950 series), 1 R (cisco 2501), one Apache server on Linux machine (Fedora) and 5 computers . My task is to test my application for preventing DoS attacks on the computer with Apache. My network design is on the image, but if will be necessery, I can change it (I can use more switches and routers like this). So my noob questions are:
1.) will this desing work? How can I connect these to LANs to router? do I need one more router? can I connect SW ethernet port to router's console port?
2.) I have erased SW and R configuration. I have configured only interfaces and RIP protocol with networks 10.0.0.0/8 and 192.168.0.0/24. what else I need to configure for making possible viewing webpage from computer with apache on other computer?
3.) what is "ip http server" setting?
4.) i need to send TCP, UDP, HTTP and ICMP packets from computers to apache (is it default allowed?).
5.) i need to use all bandwidth for DoS attack, so i need to disable security mechanisms (configurations are erased, so what else do i need to disable or set up?) I heard only about storm-control, but it is disabled.
6.) do I need to setup something like this for full speed on devices?
interface range fa 0/1 - 3
speed 100
duplex full
7.) last question is, I want to monitor protocols and ports of packets sent from computers to apache computer or bandwidth usage (bits/s). Does have SW/R some mechanisms for statistics like this?
Thank you very much.
Matej

Matej Mihalech wrote:Hi to all!At first I am sorry for a lot of noob questions - I am just beginner in networking.I have LAN with 1 SW (cisco catalyst 2950 series), 1 R (cisco 2501), one Apache server on Linux machine (Fedora) and 5 computers . My task is to test my application for preventing DoS attacks on the computer with Apache. My network design is on the image, but if will be necessery, I can change it (I can use more switches and routers like this). So my noob questions are:1.) will this desing work? How can I connect these to LANs to router? do I need one more router? can I connect SW ethernet port to router's console port?2.) I have erased SW and R configuration. I have configured only interfaces and RIP protocol with networks 10.0.0.0/8 and 192.168.0.0/24. what else I need to configure for making possible viewing webpage from computer with apache on other computer?3.) what is "ip http server" setting?4.) i need to send TCP, UDP, HTTP and ICMP packets from computers to apache (is it default allowed?).5.) i need to use all bandwidth for DoS attack, so i need to disable security mechanisms (configurations are erased, so what else do i need to disable or set up?) I heard only about storm-control, but it is disabled.6.) do I need to setup something like this for full speed on devices? interface range fa 0/1 - 3speed 100duplex full7.) last question is, I want to monitor protocols and ports of packets sent from computers to apache computer or bandwidth usage (bits/s). Does have SW/R some mechanisms for statistics like this?Thank you very much.Matej
The 2950 switch and 2501 router are pretty old, low specification devices, so you might run into performance problems. Be aware of this. The 2950 also is not, from memory, a layer 3 switch, so it does *no* routing.
To answer your questions 9I'm assuming some basic knowlege of how to use IOS, so these commands are indicative only).
The 2501 has only one ethernet port, so you can't connect the way you have in your diagram. Youc an not connect an ethernet port to the router console port - the console port is a serial connection, by default running at 9600/8N1, and is not convertable to ethernet.
To make your required network work, you'd need to do the following.
1) Configure your 2501 ethernet port for dot1q VLAN trunking by doing something like this
interface fastethernet0
no shutdown
speed 100
duplex full
no ip address
interface fastethernet0.2
encapsulation dot1q 2
ip address 10.0.0.4 255.0.0.0
interface fastethernet0.3
encapsulation dot1q 3
ip address 192.168.0.1 255.255.255.0
Setup in this manner you don't need routing protocols such as RIP because both routes will be directly connected, and the router will know how to get between them without anything fancy.
Then connect the ethernet interface of your 2501 to a port on your 2950 switch - I'll assume it's a 24 port switch, so I'll use interface f0/24
Create VLAN's 2 & 3 for your devices by doing this (2950 is so old the IOS method us creating VLAN's won't work, from memory)
vlan database
vlan 2 name workstations
vlan 3 name server
interface f0/24
switchport trunk encapsulation dot1q
switchport mode trunk
speed 100
duplex full
switchport trunk allowed vlans 2-3
You can create a VLAN interface for management of your switch at the same time if you like
interface vlan2
ip address 10.0.0.7 255.0.0.0
no shutdown
Then connect your devices. You will need to configure each switchport into an appropriate VLAN - for example, if you are connecting your server to port f0/23
interface f0/23
switchport mode access
spanning-tree portfas
switchport access vlan 3
Use "switchport access vlan2" for your workstation ports.
The "ip http server" setting on switches/routers enables management via the web - on these old devices, turn it off, as it's next to useless. Type "no ip http server" in configuration mode.
There is no packet filtering or security enabled on these devices by default, so you can just sling whatever you like at the Apache server.
Unfortunately, owing to the fact you only have one ethernet port to uplink to the router, you will never be able to saturate the server. The best you will manage is 50 megabits per second (half in, half out) because you have to trunk back to the switch to get to the server. If you really need to flood the server, you either need a better router (one wit two ethernet ports) or a layer-3 capable switch (so you can eliminate the trunk and just use the in-built routing capabilities between subnets).
And finally - you won't be able to monitor protocols/ports using this hardware. You *could* setup a MONITOR/MIRROR port and use a separate PC running wireshark or something to monitor the trunk port, but that'd need additional hardware (PC's), and a bit more configuration.
Phew. Hope that helps a bit. Basically, to do the loading you want, you need better/different hardware, but you can come close with what you've got.
Cheers.

Scripts on tablespaces and good documents for tablespaces

i required real time scripts for tablespaces and also knowledge sharing documents on tablespaces please provide them
thanks

Hello,
i required real time scripts for tablespaces and also knowledge sharing documents on tablespaces please provide them It depends on the Oracle Release:
http://www.oracle.com/pls/db102/print_hit_summary?search_string=TABLESPACE
Every Oracle Release has its news features. For instance LMT (Locally Managed Tablespace) was introduced in *8i*, ASSM (Automatic Segment Space Management) in *9i*, BIGFILE Tablespace in *10g*, ENCRYPTED and COMPRESSED Tablespace were respectively introduced in *11.1* and *11.2*,... and so on.
The UNDO Tablespace appeared with Oracle *9.2* and the SYSAUX Tablespace with Oracle *10.1*.
About the Scripts, the previous post give you many useful Notes from MOS.
Else, you can also extract Report about Database Storage from Oracle SQL Developer which is a free tool:
http://www.oracle.com/technetwork/developer-tools/sql-developer/overview/index.html
Hope this help.
Best regards,
Jean-Valentin

Issue Concerning Flip Book Creation using In Design and converting document to SWF file

Hello. We are a charitable organization which publishes an annual magazine. I have been looking at better ways show our magazine on the web and like the FLIP BOOK format. I have created a sample here -- 2014 Magazine When you look at this you will see that there is an issue with a white page showing at the front and the back of the magazine. I prefer the 2 page format. Have tried in one page - don't like it. I also don't have funding available to purchase more software to do this. While I appreciate they exist, I get the result I want I just don't want the first white page or the last white page to show. Does anyone know if there is a work around. We do our website design with Muse.

I have been looking at better ways show our magazine on the web and like the FLIP BOOK format.
Are you ok with the magazine not showing on Tablets? And the text is almost illegible because of the low res.
When you look at this you will see that there is an issue with a white page showing at the front and the back of the magazine.
When you export a swf you can choose use Paper as the background color. A swf movie's stage is one static pixel dimension, so if you want spreads the stage would be set to the spread dimension. You get the Paper background color to the left of page 1, which is the empty stage.
A work around would be to set your InDesign Paper swatch color to match the HTML container background (#5F0F1C in your case) and then put a frame filled with white on the bottom layer behind every page.

Setup and loading document for CRM 5.0

hi,
If any one having SETUP and LOADING for CRM 5.0.Plz share with me.
My e mail id is [email protected]
Thanks and regards
raja durai

Hello Raja,
Please gothrough the following link.
http://help.sap.com/bp_crmv250/CRM_DE/index.htm
Reward with points.
regards,
Muralidhar Prasad.C

Design and Sizing Document for CUCM 8.x

Similar Messages

Maybe you are looking for