Design Dashboard question

hi everyone,
in my dashboard I have a Map with places on it.
I Want to do an arrow from some of the places in the map that goes to a table for that specific place.
I dont have a component that is an arrow I have just a simle straight line.
IS there an option do do an arrow without component ??
Or at least to do the line in an angle??
tnx.

Sadly there is no option to create or design a arrow component now, but can you try with image component to call the arrow image as a workaround.

Similar Messages

What are the best practice to design Dashboard?

Hi Friends,
What are the best practice to design Dashboard?
Thanks

1) Use section name instead of Title View to name your report. This way sections can be collapsed and user can still see report name.
2) Enable alternate coloring in tables and pivots for easy readablity and set table and pivot widths to 100% (for reports in dashboards) to reduce white space and achieve a more "professional look."
3) Use column selectors and view selectors to reduce the width of reports and reduce the amount of columns user sees to a "practical minimum."

Misc Basic PL/SQL Application Design/Programming Questions 101 (101.1)

---****** background for all these questions is at bottom of this post:
Question 1:
I read a little on the in and out parameters and that IN is "by reference" and OUT and IN-OUT are by value. To me "by reference" means "pointer" as in C programming. So it seems to me that I could call a function with an IN parameter and NOT put it on the right side of an assignment statement. In other words, I'm calling my function
get_something(IN p_test1 varchar2) return varchar2;
from SP1 which has a variable named V_TEST1.
So.... can I do this? (method A):
get_something(V_TEST1);
or do I have to do this (method B):
V_TEST1 := get_something(V_TEST1);
Also, although this may muddy the thread (we'll see), it seems to me that IN, since its by reference, will always be more efficient. I will have many concurrent users using this program: should this affect my thinking on the above question?
-- ******* background *******
So Far:<< I've read and am reading all over the net, read and reading oracle books from oracle (have a full safari account), reading Feurstein's tome, have read the faq's here.
Situation Bottom Line:<< Have an enormous amount to do in a very little time. Lots riding on this. Any and all pointers will be appreciated. After we get to some undetermined point I can re-do this venture as a pl/sql faq and submit it for posting (y'alls call). Some questions may be hare brained just because I'm freaking out a little bit.
Situation (Long Version):<< Writing a pl/sql backend to MS Reporting Services front end. Just started doing pl/sql about 2 months ago. Took me forever to find out about ref-cursor as the pipe between oracle and all client applications. I have now created a package. I've been programming for 20 years in many languages, but brand new to pl/sql. However, pl/sql sql has freed me from myriad of limitations in MS RS's. My program is starting to get big (for me -- I do a lot in a little) pks is currently 900 lines with 15 functions so far. Currently SP (pls) is back up to 800 lines. I get stuff working in the sp then turn it into a function and move it to the package.
What does application do?:<<<< Back End for MS Reporting Services Web front end. It will be a very controlled "ad-hoc" (or the illusion of ad-hoc) web interface. All sql queries are built at run-time and executed via "open ref cusor for -- sql statement -- end;" data returned via OUT ref_cursor. Goal is to have almost 100% of functionality in a package. Calling SP will be minimalist. Reporting Services calls the SP, passes X number of parameters, and gets the ref_cursor back.
Oracle Version: 10.2 (moving to 11g in the next 3 months).Environment: Huge DW in a massively shared environment. Everything is locked down and requires a formal request. I had to have my authenticated for a couple dbms system packages just to starting simple pl/sql programs.

Brad Bueche wrote:
Question 1:
I read a little on the in and out parameters and that IN is "by reference" and OUT and IN-OUT are by value. To me "by reference" means "pointer" as in C programming. So it seems to me that I could call a function with an IN parameter and NOT put it on the right side of an assignment statement. The IN parameter is not passing by reference. It is passing by value. This means variable/value of the caller used as parameter, is copied to the (pushed) stack of code unit called.
An OUT parameter means that the value is copied from the called unit's stack to the caller (and the current value of the caller's variable is overwritten).
To pass by reference, the NOCOPY clause need to be used. Note that is not an explicit compile instruction. The PL/SQL engine could very well decide to pass by value and not reference instead (depending on the data type used).
Note that the ref cursor data type and the LOB data types are already pointers. In which case these are not passed reference as they are already references.
The NOCOPY clause only make sense for large varchar2 variables (these can be up to 32KB in PL/SQL) and for collection/array data type variables.
As for optimising PL/SQL code - there are a number of approaches (and not just passing by reference). Deterministic functions can be defined. PL/SQL code can be written (as pipelined tables) to run in parallel using the default Oracle Parallel Query feature. PL/SQL can be manually parallelised. Context switches to the SQL engine can be minimised using bulk processing. Etc.
Much of the performance will however come down to 2 basic issues. How well the data structures being processed are designed. How well the code itself is modularised and written.

Dashboard question and my app store icon disappeared...

I was looking at the dashboard widgets to download and I found a game to download. Once I downloaded it and opened up my dashboard, all I see is the game. All my other icons are behind the game and I can't see them. I don't know how to make the game screen smaller like the other icons or even delete it.
I am very new to owning my first Mac, so I put in the Mac OS Install DVD and after it finished downloading, my app store icon disappeared. There is a question mark in the place that was my app store icon. How do I fix that?
Thanks!

Did you reinstall the software from the dvd? It sound like you are now running an os that is under 10.6.6.
Click on the apple icon in the menu bar and select "about this mac"
That will show you the os version you are running now. You need to have 10.6.6 and above to have the app store installed.
In this case all you have to do is run a software update and download the lattest os update which should be 10.6.8.

Forum for graphic design related questions?

Does anyone know of any good graphic design discussion forums? I'm looking for a place to ask questions about typography, color, layout, etc.
Thanks in advance.

Not as much activity on soem of these, btu here are some good ones
http://typophile.com/
http://www.underconsideration.com/brandnew/
http://www.howdesign.com/forum/

Simple Design Analysis Question before designing dimensions and facts

Hi I have a simple question ... (I think its simple)
Suppose that i have the following staging table with the following columns:
Student_Name | RollNo | Test_Date | Subject-Taken
with data such as
Kevin |123|12-4-2010|Physics
now suppose that I want to design a cube on the basis of the above table so that I can succesfully get the result of a query such as
List the names of all those students who took the test b/w 12-4-2010 to 12-5-2010 of the Subject Physics
Here what i need to know what dimensions/Levels would u set and what would be our fact?
I think that one dimension would be time ( but i am not sure how i would accommodate and handle duration... any idea )
would it be wise to make each column a dimension ??? for example the student_nanme a dimension and details of the student its attributes??
Anyways the main thing is what bothers me is looking at the query we see that we are required 3 things the name of the student , the TestDate and subject taken so if i make the 3 columns the dimension i am still not sure that i would be able to acomodate the query properly...any ideas on how to approach and handle these situations
Edited by: Johnacandy on Dec 14, 2010 9:26 AM

ScoobySi wrote:
Yes I mean Time dimension, however in a DW you will have many Time dimensions, instead of creating a physical object for each you use a ROLE. If you edit a dimension in OWB you'll see that you can specify a ROLE on the first tab.
Thanks for the great explaination... could you explain the process of roles a little more that will really save me some time... furthermore u stated
+ "instead of creating a physical object for each you use a ROLE" +
The way i create dimensions is right clicking dimensions and selecting dimension.... for a standard dimension
however incase of a time dimension i use a wizard... I am still a bit confused about "Physical objects" ... Id really really appreciated it if you can clarify this up...
as discussed before one dimension would be Student and other would be subject
and 3rd one would be TEST_DATE with role ?? and should that be a time_dimension or a standard dimension with a role defined ???

Designer datamodel questions

I've got a couple of questions about how to do a few tasks in Designer. First, a little background: I've got a dataconnection called "report_data" that's derived from and xml schema. The structure of the schema is somehing like this: <report> <job_description> <name/> <start_date/> <end_date/> </job_description> <task> <name/> <description/> <resource> <name/> <cost/> </resource> <subtask> <name/> <description/> <resource> <name/> <cost/> </resource> </subtask> <task> </report> a report has a single jobdescription, and multiple tasks. Each task has a name and decription, multiple resources, and multiple subtasks. Each subtask has a name and description, and multiple resources. I've designed a report entry form, with multiple subforms for job_description, tasks, resources, and subtasks. I've then bound these subforms to the datamodel. This is all good and works. The problems start occuring when I want this form to be dynamic. The Task subform has a button "add_new_task", which adds a new task to the report. It does this by calling a function "add_new_task()" in a script object. The function is as follows: function add_new_task(){ var t_node = xfa.datasets.dataDescription.report.task.clone(1); t_node.resolveNode("name").value = "task " + (xfa.record.resolveNodes("task[*]").length + 1).toString(); xfa.record.nodes.append(t_node); xfa.form.remerge(); } This function appears to work, new instances of the task subform are appended to the document. The task subform also contains subtask subforms. They are added with a button "add_new_subtask", that calls a function "add_new_subtask(task)". the function is as follows: function add_new_subtask(task){ var st_node = xfa.datasets.dataDescription.report.task.subtask.clone(1); st_node.resolveNode("name").value = "subtask " + (xfa.record.resolveNodes("subtask[*]").length + 1).toString(); task.nodes.append(s_node); xfa.form.remerge(); } The button click function is: scripts.add_new_subtask(xfa.record.task); Resources work in a similar way. The problem is now that when I try to create subtasks, they are appended to the initial task, not the task associated with the current record. Same thing for Resources. Doesn't xfa.record refer to the current record? If not, how to I determine the current record? xfa.dataWindow.currentRecordNumber is always returning 0. I'm assuming that's because there is only 1 instance of the report. How do I determine the record associated with a given subform? Is there a better way than using the index of the subform and getting the record with the same index?

To determine the instance of the record associated with a given subform, you can get the subform's
index property value. Since new instances are created with the same name as siblings of one another, they end-up getting index numbers in order to make them unique.
For example, if you create a new instance of the Task subform, you'll have "Task[0]" and "Task[1]" where
this.index will be 0 or 1. If it's an object parented to the Task subform which needs to know the instance of the Task subform/record in which it occurs, you can use the
parent property to drill up to the Task subform which contains the object in question and then get its index property value.
Creating bookmarks is a little more complicated. Unfortunately, XFA doesn't support bookmarks so you have two options:
Use the xfa.host.setFocus("field name") method to set focus, when the user clicks a button, to a field somewhere on the form to have Acrobat automatically scroll the field in view and set focus to it (see post #6 of the
Links Within PDF thread for an example); or
Use the
target property of the event object you get in an XFA event script to access the Acrobat Document object and then programmatically add bookmarks to the form (but
this will only work if the form is viewed using Acrobat):
event.target.bookmarkRoot.createChild("Next Page", "this.pageNum++");
I'm not familiar enough with creating bookmarks in Acrobat to elaborate further on the subject but you can read more about it in the
Acrobat JavaScript Scripting Reference.
I hope this helps!
Stefan
Adobe Systems

Analytics dashboard question

I'm a Captivate user and I wanted to get a better understanding of the Analytics Dashboard so I've downloaded the Presenter 9 trial. I've enabled analytics as well as reporting for a SCORM 2004 environment, published a file with multiple questions, and uploaded the zip SCO into my LMS as well as into SCORM cloud.
When I launch the module I'm presented with the user login prompt, but when I enter my information and click Sign In I get an error message "Error connecting to server, try again." If I continually try to login it will eventually move into the content.
I've also tried launching the content without the SCORM reporting turned on and running the module from a web server, but I still get at least one error message about being unable to connect to the server.
In all three cases, the data from the attempts isn't updated in the learning dashboard. Since I haven't found any information about how this functions I'm guessing that either the data doesn't get updated dynamically or that the error messages are causing the problem.
Can anyone enlighten me to these issues?

Hello,
Sorry to know that you are facing problems with Analytics dashboard in Presenter.
Can you tell us if you could connect to als.adobe.com when you were getting this message?
Our server was down for few hours yesterday for maintanence and this was informed to all existing customers.
Can you please retry your workflow as all services are up now. Let us know if its works for you.
If it does not, you can email us at mvlele(@)adobe(dot)com and we will do our best to resolve your issue at the earliest.
Regards,
Mukul

Designing Dashboard for Ipad

Hello
We have a requirement to run the dashboards on ipad. We have SP08 patch level 1 and dashboard client is also on the same level. We also have the updated mobile app.Mobile settings have been successfully configured and we can see all our WebI reports on our mobile devices(iphone,ipad& note). But the dashboards are still not being displayed properly.
when we open the dashboards(Client) with mobile compatibility feature we see that our dashboards have query prompt browser and this is not supported on mobile. Now I have been trying to replace these query prompt browser but since I have limited knowledge in dashboard design I am unable to get on with it.
so I guess I need to replace the query prompt browser with a Bex query but I don't know how exactly. I would appreciate if someone could advise me on what changes I need to make to display my existing dashboard on mobile devices.
or
Do I need to re-design my dashboards from the scratch for ipad?
please refer below the screens of our dashboards on ipad & on desktop?
Dashboard on Desktop:
Dashboard on Mobile:
Thanks in advance to all the members,

Hi Imran,
Dashboard is completely different when you are designing for ipad when you compared with webi. There are so many checklist you need to follow to achieve the dashboard 100%. As a first step i would request you to go through the below link and check whatever you designed is compatible for ipad. Then replace with the other component which supports for the design.
How to Configure and Access Dashboards from IPad
Coming you query prompt selector, i would suggest you to swap with combo box and use the query refresh button. to trigger the query. please revert for more clarifications. Hope this helps bro.
--SumanT

Design View question

Good evening,
I'm working on a site using a Dreamweaver template and for
some reason my "Design View" shows up only like you'll see in the
top image on this page:
http://community.middlebury.edu/~nmeiers/question.htm
I want the pages to appear like the template I put on the
bottom so I can see the design. It used to look like that and I
don't know what I changed. Any ideas?
(Yeah, I know Design View isn't ideal, but I'm not very good
at this and I like seeing the graphics.)
Thank you,
Nick

Looks like for the top image the style sheet isn't attached.
Walt
"Topkdlfs" <[email protected]> wrote in
message
news:gcro26$pnf$[email protected]..
> Good evening,
> I'm working on a site using a Dreamweaver template and
for some reason my
> "Design View" shows up only like you'll see in the top
image on this page:
>
>
http://community.middlebury.edu/~nmeiers/question.htm
>
> I want the pages to appear like the template I put on
the bottom so I can
> see
> the design. It used to look like that and I don't know
what I changed. Any
> ideas?
>
> (Yeah, I know Design View isn't ideal, but I'm not very
good at this and I
> like seeing the graphics.)
>
> Thank you,
> Nick
>

Layout / Design View questions

This is the sort of thing I've wondered about before, but
would really like to get to the bottom of.
Sometimes things seem to go a bit funny in design view -
although the page will display correctly in a browser - but can
anyone let me know if there is something not quite right somewhere,
or if it actually really matters?
As an example, I've posted some screenshots on the link
below. The only difference is that the 'footer' div has been added
to the second page. They're both fine in the browser, but as you
can see from the screenshots, the first is fine in design view, but
the second (the bottom two screenshots) it all looks wrong.
Basically is this anything to worry about?
Even if it isn't, it is a bit annoying, as from a design POV
it's good to see things as they should be!
screenshot
1
My second question is about TD widths - in these pages I have
a wrapper div set at 780px, and in the table containing the
navigation, they navigation buttons/graphics seem to need to be one
px narrower than they actually are (54 instead of 55px etc) in
order for them to line up to the total 780px, as per the screenshot
below :
screenshot
2
If anyone could shed any light on any of this it would be
greatly appreciated.
Cheers,
Iain

dukla wrote:
> Basically is this anything to worry about?
No its nothing to worry about.
I don't know what version of DW you are using but all
versions up to
2004 didn't handle css that well.
I believe DW8 has improved. However having said that I have
found a lot
of the time that it also has a lot to do with how you write
the css. I
can't believe version 8 can possible cover all eventualities
so it
probably still shows the odd thing or two incorrectly.
Personally I never had much trouble with DW04. It works
pretty well with
the css I write.
> Even if it isn't, it is a bit annoying, as from a design
POV it's good to see
> things as they should be!
Yeah it does get a bit annoying but you have to work through
it.
> My second question is about TD widths - in these pages I
have a wrapper div
> set at 780px, and in the table containing the
navigation, they navigation
> buttons/graphics seem to need to be one px narrower than
they actually are (54
> instead of 55px etc) in order for them to line up to the
total 780px, as per
> the screenshot below :
>
>
http://www.handprintwebdesign.co.uk/CollinsBartholomew/tableDesign.htm
>
> If anyone could shed any light on any of this it would
be greatly appreciated.
I don't think this web thing is totally precise and sometimes
you have
to 'hack' it to do the job. Usually if thing are a px out I
don't bother
unless it screws the design up in too mmnay browsers.

ACE: design/config question: trans.slb + slb + mngt

Hi,
Could this ACE setup/design work?
I want PROXIED sessions (to VIP proxy 10.0.0.10) to be loadbalanced
All other sessions (eg. Some public ip's) will have to transparent loadbalanced to proxy servers. Thus not destinations NAT
ACE is inline between firewalls and proxy servers.
Vip definitions:
class-map match-all P_PXYVIP_VS_LB
2 match virtual-address 10.0.0.10 255.255.255.255 tcp 8080
class-map match-all P_PXYTRANS_VS_LB
2 match virtual-address 0.0.0.0 0.0.0.0 tcp any
Question in this case: would it still be possible to have management sessions towards proxy servers routed by the ACE ? (physical ip addresses of proxy)
Probably the classmap PXYTRANS is catching those sessies also.
Are there other design/config solutions to solve this one?
Thank you!
Wim

Let me repose the question:
How could one still be able to access the realserver IP (which is directly connected
to the ACE) for manangement.
Knowing that there is 1 VIP which (normal) loadbalance to the realservers
and
there is 1 VIP 0.0.0.0 tcp any which is configure to catch all other traffic to be
transparant loadbalanced.
The VIP 0.0.0.0 is always catching the sessions which need only to be routed
to the real servers ip.

Designing internationalization questions

We are building a mid-size to large JEE multi-tiered application. We have not done internationalization before and I have a few questions about the designing before I begin. I have read the tutorial, and many other articles, and kind of understand how it all works, but have a few questions that might be better suited to some people with real world experience. For now I am focusing on the Client side of the application so labels, checkboxes, tooltips, buttons..... mostly UI things. The application is currently only in English, but in the future could be in other languages
1) When building the properties files is the best route to build a separate file for each UI java file (there are many), or one properties file for the whole client side application, or one properties file per package? What is best in the real world for maintenance, performance and adding other locals as needed.
2) Is the best practice to store these properties files in the each source code package or design another package that mirrors what the source package looks like for the properties files.
3) When the application is finished would it be best to keep all the resource files in a separate jar?
If anyone has some real world expertise for us to avoid some mishaps in the future they would be greatly. Any advice or explanations would be great as well.
Thanks

In my experience, the greatest problem is none of the three questions that you ask. For me, the problem is how to manage key names. You must remember them and make no typing mistakes. Therefore, I try to create enums for the keys. In most IDE's one has a type ahead function to aid in selecting a proper member of some class. Please have a look at the following example (that can be extended, but it gives an idea):
import java.util.Enumeration;
import java.util.ResourceBundle;
import java.util.Vector;
public class ResourceBundleWithEnums extends ResourceBundle {
 public enum Key {
 * The text of a label.
 LabelText("A label"),
 * The text of a button.
 ButtonText("A button"),
 private final String value;
 private Key(String value) {
 this.value = value;
 private static final Vector<String> keyStrings;
 static {
 Key[] keys = Key.values();
 keyStrings = new Vector<String>();
 for (Key key : keys) {
 keyStrings.add(key.name());
 public static void main(String[] args) {
 ResourceBundle bundle = ResourceBundle
 .getBundle(ResourceBundleWithEnums.class.getName());
 System.out.println(bundle.getString(Key.ButtonText.name()));
 Enumeration<String> enumeration = bundle.getKeys();
 while (enumeration.hasMoreElements()) {
 String key = enumeration.nextElement();
 System.out.println(key + " = " + bundle.getString(key));
 @Override
 public Enumeration<String> getKeys() {
 return keyStrings.elements();
 @Override
 protected Object handleGetObject(String key) {
 try {
 return Key.valueOf(key).value;
 } catch (Exception e) {
 return null;
}For your translations, you may design some editor that creates properties files.
Hope this helps,
Piet

Adobe LiveCycle Designer 8 Questions Go Here

You can use this forum for questions relating to Adobe LiveCycle Designer 8. LiveCycle Designer 8 is available as part of the trial for Adobe Acrobat Professional 8, and will be available in a standalone version in 2007.
There are a lot of improvements to Designer in LiveCycle Designer 8, but the main concepts and UI is the same. Because of that, we won't be creating a seperate forum for LC Designer 8, we'll use this same forum (which has been renamed to just "LiveCycle Designer".
If you have questions, please post them in this thread.
Thanks!
Mike

Just upgraded to Acrobat 8. My users are now receiving a warning when the form is opened in adobe reader 7.0.8 that says "WARNING, this form is not supported with the current version of adobe reader. Upgrade tot he latest version for full support." THis message seems to stay for quite a while, and is confusing the users who have the latest version of adobe reader.

Absolute beginner: shirt design related questions

hi all. i thought i'd be as detailed as possible to give you an idea of what my questions are:
i have some hand-drawn art/design for a t-shirt. so i took some pictures, and my daughter opened them up in photoshop elements 6. she was able to easily trace over my pencil lines, BUT the lines were not smooth at all. say i drew a circle. it is not so much that it is not a perfect circle, especially if free-handed, but that the edges of the line of that circle are not smooth.
turns out elements can't do that, after i called adobe. they suggested illustrator, which i am currently demo'ing. when i had my daughter (she's 17, been playing with elements rather well) try to do it illustrator, it wasn't as intuitive as both of us thought. it's gotten her stumped.
for the most part, that's all i want to do. pull up a picture of a hand-drawn sketch, and draw it in illustrator with some smooth lines. i would very much appreciate some guidance on what to do!
stumped!
THANKS IN ADVANCE.
jack

Jack,
When you start from scratch in this kind of program, you just have to read the instructions. Otherwise, you'll be floundering about forever being confused. Vector drawing programs like Illustrator are not immediately intuitive to someone who is accustomed only to working in raster image programs (i.e.; Photoshop, etc.).
Vector graphics is the "other half" of the computer graphics world. In a program like Illustrator, you're not recoloring pixels; you're creating and manipulating objects, most of which are mathematically-defined shapes called paths. You draw paths, give them strokes and/or fills, move them about, stack them, scale them, arrange them so that together they comprise a piece of artwork.
Go to the help files, start at the beginning, read through it like a book, perform the operations described. You'll then get the conceptual principles down and start using the thing with much less frustration. It will take time. This isn't the kind of graphics program you just dive into blind, have someone tell you a few command sequences, and start doing productive work in. You have to read the instructions.
JET

Design Dashboard question

Similar Messages

Maybe you are looking for