Design invitation card in A4 print out with duplex and fold to A5

How can I design an invitation card in A4 print it out with 'duplex' (both sided print out) as A4 and then fold it to A5? I would like to have pictures and text on all four sides of the card. I have a Canon iP5300 printer which allows duplex printing. Can I use any of the Page Layout templates and if yes how?
Support would be highly appreciated.

I have a Canon iP5300 printer which allows duplex printing.
The system is out of the picture since this is only about such driver services as Canon supplies for Canon printers. If the driver lets you do, you can do it. If you can't get the driver to do it, try building out a PDF and stepping into a print shop that will do the printing and folding for you albeit at a price. /hh

Similar Messages

İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

Hello,
Try following the instructions here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
If that does not help, let me know and I will see what I can do.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Separator page prints out with wrong name when printing from Outlook 2010

Working with Windows 7 Enterprise, Outlook 2010. We've set up our desk printers to print a separator page with the user's name, as several people use the same printers in our building. Printing from IE, Word, etc. all work fine, and it'll print
out the correct username on the separator page.
When anyone attempts to print an Outlook email, it instead prints out my username. We've found that it doesn't happen if they click on the "quick print" button, but it happens every time if they do "file > Print" or Ctrl+P.

Hi
As per the information and details provided by you that separator page prints out with wrong name when printing from Outlook 2010, please follow these steps: -
To create a custom separator page file, use a text editor such as
Notepad. On the very first line, type one single character, and then press
Enter. The character on this line defines the character used as an escape character. For example, the following list assumes that this character is the at sign (@).
Enter the escape codes for the functions you want, and then save the file with an .sep extension in the Windows System32 subfolder.
In the Print Manager, select the printer that you want to use the separator page file with, and then click
Choose Properties on the Printer menu.
Click
Details, specify the name of the desired separator page file in the
Separator File box, and then click OK.
Note:
Put the custom separator page file in one of the following locations:
In the %Windir%System32 folder.
In a folder whose path contains a SepFiles folder. For example:
Drive:\Folder\SepFiles\Subfolder
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

HT1933 My ex-boyfriend stole my email address and credit card information to make purchases with Apple and now my Apple ID account has a balance. Is there any way I can retract the purchases so I don't have to pay for his theft of my information?

My ex-boyfriend stole my email address and credit card information to make purchases with Apple and now my Apple ID has a balance. Is there any way I can retract the purchases so I don't have to pay for his theft? I had no idea he had done this until I tried to sign in to the ITunes store and found all his information and a whole bunch of song purchases. I had to go to my email and reset everything. I only have a 2.10 balance due to him, but I just want to find out if there is a way to erase it because of this circumstance.

You need to immediately pull credit reports to see what else he has done. Then "freeze" the credit report at all three agencies. That way even you need to lift the freeze to add credit cards or other credit items to your SSN.

I would like to print out the icon and title of each of my apps to another document for printing and sharing within my family

I would like to print out the icon and title of each of my IOS apps to another document for printing and sharing within my family. My son has my old iPod touch so I erased it so he could put whatever games he wants to play on that I used to play with. It is difficult to download every game at one time because there is too much to download at one time. I have many hundreds of apps. One way I found was to create a screen grab of each page in iTunes then open it in Preview contact sheet but that is really tiny unreadable image of each screen. I also tried importing a screen shot of the contact sheet into Paint 2 and magnifying it on several pages but that is really blurry. The ideal solution would be to import the icon and text to another app or to provide a print list of apps solution within iTunes.

Create iPad screen shots by briefly pressing the home and on/off buttons together. You will hear a shutter click sound and find a screen shot on your iPad's Camera Roll. You can then print these screen shots as you would any iPad photos.
UPDATE: I assumed you had an iPad. Hopefully your iOS device does have an on/off and home button and is capable of producing screen shots.

PO_QTY came out with 0 and negative number

Hi experts,
I was loading data via 2LIS_02_SCL,2LIS_02_ITM. PO_QTY was populated by ABAP instance. But some PO_QTY number came out with zero and negative number while some of other PO_QTY number came out with the right number.
I was working on this problem for 2 days but have no idea on it. Anybody can help me?
Thanks a lot.
Junbo

dear Junbo,
are you working with business content extractor only, i mean no enhancement to that field ? i think it can be 'program error' that po quantity is not correct, try to search oss note ? what's your r/3 PI level ? applied the oss note mentioned before working with lo-mm pur ? it's stated in mm pur extraction doc (if you have not this doc, let's know your email, will send you).
if you are using business content extractor only without enhancement to this field, you may create oss message to get sap help. debug with rsa3 option debug marked is possible.
hope this helps.

Cannot print "working with files and folders htm

When I try to print "Working with files-and-folders" from a Google search, it only prints part of it. I have changed my destination folder to no avail. Thank you or any help, Jack Menendez

What's the best method for moving all my nonsystem related stuff over to this new driveIan has provided you with the best solution, SuperDuper.
But if you have a 250 GB external, you really ought to clone your entire system,(only about 3 GB) so you have a backup.
I keep mine with a complete clone of my internal, that way it is easy to boot from the external and run utilities like Disk Utility, TechToolPro, DiskWarrior, etc. on the internal and vice versa.
If you run into a problem with say Preferences and don't know which one is the troublemaker, just trash the whole pref folder and use the good one from the clone. Font problem, same deal. And, if diaster ever strikes, you can just boot up from your external and keep right on working - fix the internal when you have time.
That's my 2 cents anyway
-mj
[email protected]

How to take check print out for self and in favour of Bank for DD payment

HI
I have a requirement to take check print out for self and in favour of Bank for DD payment from AP module, how it is possible.
Syam

hi syam,
Step 1: Create a down payment request: F-47
Step 3: Make payment through : F-58
While entering the input parameters, Enter amount: 1050,
For 50 Rs, you take Bank Charges account through GL Fast entry.
Account Entry
Vendor Dr (Spl GL): 1000
Bank Charges Dr 50
SBI Cheque Issue clearing Account Cr 1050
Regards,
Ramakrishna

I'd like to print an 8x12 and cut it in half to make two 4x12 panorama type pictures. Is there any way to combine two pictures (each cropped to 4x12) into one frame so I can print out the 8x12 and trim it after printing?

I'd like to print an 8x12 and cut it in half to make two 4x12 panorama type pictures. Is there any way to combine two pictures (each cropped to 4x12) into one frame so I can print out the 8x12 and trim it after printing?

To clarify, I want to be able to make a flie I can take to a photo printing place (not for my own printer) so they can print it and I crop it. The place I used to print at used to print an 8"x12" for the same price as 8"x10" (now they may only do 8x10 and I would need to keep the ratio the same so it would be two 3.3"x10" pics on an 8x10"). Any help is veryappreciated!

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. When I open the contact, I can only see 3 contact names and the rest of 4000 contacts are not listed

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. However, when I open the contact, I can only see 3 contact names and the rest of 4000 plus contacts are not listed, and it makes you difficult to call through contact

The iPhone remembers information about previous contacts.
Complelely independently, you have a Contacts app with a contacts list. It sounds like your contacts list has 3 names on it. You need to add a few names.

Print out of drawing and QA instructions along with PO

Hi Gurus,
I have a requirement of printing the material drawing and the Quality instructions along with the PO print out.
Material drawing is to be sent to the vendor and Quality inspection instructions to the stores.
I am updating these documents in the additional data of the material master under document data tab page. Every time PO is printed, these documents should also be printed.
Is there any standard functionality which meets my requirement ?
Please answer..Thanks in advance
regards
Kumar

Hi,
You have to take help of ABAP for this. It is not possible in SAP Standard.

Pages are not printing out correctly. I have tried to fix in the options, with no luck. It prints out with spaces in between the letters.

When I go to print any page from an email, webpage, pdf file..the pages print out very wide fonts to the point where it is unreadable. I have tried to fix in the options with no luck. I can provide you with visuals if you need me to.

Thanks very much! It works! The print / review print - print works like it is supposed to. The print is corrected and works great. Thanks again.

Purchase Order Print out with Digital Signature

Dear Gurus,
1) we are going to implement release strategy, but still business requirement to have a digital signature, Meaning, if only upto Supervisor release, then PO print should come with Supervisor digital signature, if PR value upto Supervisor & manager release, then PO print should come with Manager digital signature, if PR value upto Supervisor, Manager, GM Reelease, then PO print should come with GM digital signature, Whoever approves last, then their signature should appear in the PO printout - How to Achieve this?
2) If any amement in the Purchase order, then is it possible to reflect in the PO print out as Rev1 , Rev 2...?
Please advice
Thanks
RS

Dear,
Check : http://help.sap.com/saphelp_nw70/helpdata/EN/18/ecb69017ad4765855425b97f666470/content.htm
May be helpful.
Another is scan the signature to bmp and attach the bmp through smartform or sapscript - But this is not digital signature.
Regards,
Syed Hussain.

Problem in print out with English characters (THANGSAN font)

Save Our Environment. Save Yourself.
Hi Experts!!
I have created a smartform and print program which should actually print some Thai characters and English characters too. I created a smartstyle and have some 10 paragraph formats and are all have THANGSAN font. So, I am printing all the thai and english characters in THANGSAN font only.
When print preview is seen, the output is very fine, but when being printed, the thai characters are appearing fine but the english characters' font is being changed to somehting else (courier or arial). Why is this happening so? Because of this, all the output is being merged and looking very weird.
The smartform is created in EN and is translated to all languages. All user has logged on to SAP in EN language.
Can somebody please help me out with whether the problem is with THANGSAN or the printer?
P.S. The smartform is actually similar to the standard script Z_RVINVOICE01 in which only THANGSAN is used.
- I'm not an environmentalist. I'm an Earth warrior.

Save Our Environment. Save Yourself.
Can anybody please help me out?
Thanks a lot.
- I'm not an environmentalist. I'm an Earth warrior.

SRM PO's to be printed out with the PO

Hello All,
I have a requirement in my current project wherein the attachments with SRM PO's are to be printed out along with the PO.
In the SAP implementation guide for this it is mentioned that `SAP
delivers a standard implementation with which you can print and fax
attachment documents' and also mentions that to implement the BAdI ie
BBP_DOC_PRINTDOC the requirement is of installing the SAP interface
External Document Converter (XDC) of the SAP component Print and Output
Management (BC-CCM-PRN).
Does this mean i need a third party tool to make this possible or SAP provides a standard with which we can print and Fax attachement documents.
Regards,
Sreejesh

Hi,
here is a SAP document and thread (found in abap general SDN forum) where you should post your question.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6e33a590-0201-0010-0197-99896fd22cda
XDC - External Document Converter
Kind regards,
Yann

Design invitation card in A4 print out with duplex and fold to A5

Similar Messages

Maybe you are looking for