Design jet z6200ps

I have a z6200ps with processing problems, the firware was uploaded to the machine and it seem to get rid of the error, fina]

Hi Whooshby,
The Designjet is a commercial product.  I am linking you to the Designjet forums try reposting your question there for better coverage.
Designjet Forums

Similar Messages

  • Hp design jet 430 wont work with windows 7

    hELP, i HAVE BROUGHT A USB CONVERTER FOR MY HP DESIGN JET 430 BUT THERE IS NO SOFTWARE TO ALLOW IT TO WORK WITH WINDOWS 7....OR AM I MISSING SOMETHING????

    Hello @johnfaulkner36, 
    Welcome to the HP Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP Designjet 430 is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP Design Jet T1100 not printing correct size

    Not sure if this is the right section to post
    Ok, we have a HP Design Jet T1100 colour printer in ouir office.
    When I click file, print, properties etc and change it to A2 or A1 for example it still prints out on A0.
    I've tried calling Helpdesk but I'm normally on the phone to them for a hours explaining the same problem to them over and over again.  The only thing they've done is send a firmware update on a CD which didn't help.

    "The HP website mentions a driver for OS 9,"
    They also list Mac OS X drivers...updated 7/21/06
    "Is there anyone out there who can give me a basic tutorial in what to look for to determine compatibility of the printer with the MacBook"
    Just look for Mac OS X drivers

  • HP design jet 500

    having trouble setting the paper size for HP design jet 500, cannot change the default settings. need 36" x 24" paper size
    Any ideas?

    here follow the link , will guied you , slect your operating system  make sure for system 32bit , 64bit
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4ts.oid=20987&ac.admit...
    I hope helpping you
    Hejazi

  • I am having problems printing with my HP 800PS design jet.

    I am have problems printing with my HP 800PS design jet. I have to call IT all the time and it is losing its print settings and the print screen will freeze uot all the time. I am told that HP does not support this product any more.

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP Designjet forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Design jet 5000ps

    Hi everyone, I am fairly new to wide format printers and wanted to see if y'all could help me out. First off my name is Hunter and I own and operate a grading & paving company and I just bought a used HP Design jet 5000ps. I purchased this printer with the intentions of printing blue prints for jobs we work on and also printing on adhesive vinyl to make decals for vehicles, banner material to make banners for advertisement, heat transfer material for clothing and so on. I am under the  impression that I need to use UV ink for outdoor applications. If this is true can I print blueprints with the UV ink or do I have to switch it out every time. If I can print everything with UV ink can I flush out my DYE ink tubes and printheads and use them with the uv ink or do I have to have separate tubes and heads for each ink type. Any help would be greatly appreciated.

    Hunter: Welcome to the forum.  I'll take a stab at answering your questions but I'm no expert, just another user like yourself who owns a couple of the 5000 series printers. Yes, you can print blueprints using the UV ink.  There won't be any noticeable difference in the print quality between the dye and UV inks. In order to switch between dye and UV ink, you have to replace the ink tanks, the tube assembly and all the print heads and cleaners as the two inks are not compatible.  The machine won't let you mix the two components, as far as I know.  So if you're using dye right now, you can switch over to UV completely and store your dye equipment if you ever want to switch back.  If you're using dye printheads and put a UV ink cartridge in, the machine will give you an error and won't let you proceed.  Only way is to buy all matching components for UV ink.  It's an expensive investment but if you can switch over to UV, it should do everything the dye ink does for you now but you'll have the advantage of the fade resistance when you do indoor signing.  You can find most, if not all the components you need on Ebay.  I've purchased a refurbed ink tube system from LPS Computer, a seller on Ebay and can vouch for his quality and being a good Ebay seller.  Here's a link to one of his UV ink tube systems:  http://www.ebay.com/sch/lpscomputer/m.html?_nkw=&_armrs=1&_ipg=&_from= Not sure about the heat transfer for clothing. My understanding is that the ink may not be suitable for outdoor use exposed to the elements.  But maybe someone else can give you better insight into this factor. Good luck and let us know what you find.

  • Software drivers for hp design jet 750 c plus plotter

    where can i download software drivers for hp design jet 750 c plus plotter

    Driver pl532en works for HP DesignJet 750C+ on Windows 7 (64 bit).
    The driver also appears to support:
    HP DesignJet ColorPro CAD by HP
    HP DesignJet 3500CP by HP
    HP DesignJet 3000CP by HP
    HP DesignJet 2500CP by HP
    HP DesignJet 2000CP by HP
    HP DesignJet 750C+ (E/A0) by HP
    HP DesignJet 750C+ (D/A1) by HP
    HP DesignJet 755CM(C3198B)by HP
    HP DesignJet 700 (E/A0) by HP
    HP DesignJet 700 (D/A1) by HP
    HP DesignJet 488CA (E/A0) by HP
    HP DesignJet 488CA (D/A1) by HP
    HP DesignJet 455CA (E/A0) by HP
    HP DesignJet 455CA (D/A1) by HP
    HP DesignJet 450C (E/A0) by HP
    HP DesignJet 450C (D/A1) by HP
    HP DesignJet 750C (E/A0) by HP
    HP DesignJet 750C (D/A1) by HP
    HP DesignJet 755CM(C3198A)by HP
    HP DesignJet 350C (E/A0) by HP
    HP DesignJet 350C (D/A1) by HP
    HP DesignJet 330 (E/A0) by HP
    HP DesignJet 330 (D/A1) by HP
    HP DesignJet 650C(C2859B) by HP
    HP DesignJet 650C(C2858B) by HP
    HP DesignJet 650C(C2859A) by HP
    HP DesignJet 650C(C2858A) by HP
    HP DesignJet 600 (E/A0) by HP
    HP DesignJet 600 (D/A1) by HP
    HP DesignJet 250C (E/A0) by HP
    HP DesignJet 250C (D/A1) by HP
    HP DesignJet 200 (E/A0) by HP
    HP DesignJet 200 (D/A1) by HP
    HP DesignJet 220 (E/A0) by HP
    HP DesignJet 220 (D/A1) by HP
    HP DesignJet 230 (E/A0) by HP
    HP DesignJet 230 (D/A1) by HP

  • Where i can find hp design jet 800 blue lever in dubai

    design jet 800
    Blue Lever
    where i can find hp design jet 800 blue lever in dubai

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Designjet board here:
    http://h30499.www3.hp.com/t5/Printers-Designjet-Large-Format/bd-p/bsc-414
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Design Jet 450C Printing from Mac OS X Yosemite 10.10.4 (Graphisoft ArchiCad to .pdf)

    Please let me know which Driver I can install to print successfully from Mac OS X.10 Yosemite to HP Design Jet 450C. THANK YOU!!

    Hi Guys  I am having similar issues with My network printer / Photocopier Doc C3100I have tried the following :  Connecting to it VIA IP address used the Xerox firmware for MAC - dindt work - it wioll beep Used PCL generic provided by MAC and didnt work - will print alot of pages that has numbers and letters on them  I have checked the logs on the printer and it state error 016-749. Abvioulsy the printer is using PCL but then why it wouldnt even work with the generic PCL driver or the xerox mac firmware ?? It is using LPD but i also tried HP socket with no rsults other than again printing rubbish  The printer works fine in windows  i have disabled the accounting function within the printer.  I have also revret to MAC 10.10.3 from 10.10.4 with no luck   I have tried to fix all premisions within mAC but again with no luck  I can creat PDF files so MAC printing software dopes work Apple couldnt help me as they think it should work with treh generic soft at least    Help please   Jason 

  • Hp design jet 4500 no print from printer

    Unit asking for starter print heads, installed and ran purge ok. Came to a ready state and started the print head alignment. You could see from the start that only a small portion of the black was printing and nothing else. I had previously cleaned print head connector in the carriage, I then ran print head recovery, twice, very small improvement. Ran several diagnostics and had no error's. Switched print heads and still no change in print quality. If new set of prints heads do not fix issue, any suggestion on what would be the next part or path to follow. Oh yes, the started print head kit were full of ink.

    Hi Ravery, 
    This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links. 
    http://h30499.www3.hp.com/t5/Business-Support-Foru​ms/ct-p/business-support 
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-​p/bsc-413 
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Design Jet 1055cm - Windows 7 - Network Driver???

    We need to get our 1055cm network for AutoCad use... Is there a normal printing driver that does not involve "Easyshare"...?
    This is a Windows 7 - x64 bit system for the connecting computer... the server is an xp system...

    Hello @johnfaulkner36, 
    Welcome to the HP Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP Designjet 430 is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Print out comes too dark from Design jet T 1300

    You are the most unreliable company I have ever seen. I just bought a plotter for over than $7000 and I can’t get hold of someone to tell me why the print comes out too dark.
    You can imagine my feedback about your company and your product.
    What is most upsetting is that, even though, I live in the US., and I bought the plotter  in US., but  when I call, some Indian  who lives in India answer the phone and give me a useless answer.

    the iMac it prints too dark
    your print space is off on the Mac
    or you are applying the wrong source profile or both
    on the MacBook Pro, the prints are also much darker than the screen (despite color calibration
    EDIT: sorry i misread that as your monitor was also dark, if the mac displays the problem doc proper, you are targeting a bad print space, that's where i would look... 
    you app is apply the wrong source profile (or your monitor profile is off)
    basing the source>print space conversion on the wrong source profile could account for your printing woes
    be sure you are embedding an ICC profile in your doc, are opening it in a color-managed app, and it should display properly
    be sure your workflow uses the embedded profile and your printer is setup to convert to the proper printer profile
    color management theory
    epson workflow

  • Design jet 800 pattern data

    Does anyone have the source for some patterns I could get? iE, the data (rows & columns) for a pattern for my 800. 32X32, 64X64, any size ok.  THanks

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP Designjet forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Need WHMIS information for Design Jet 130nr

    I believe the fan seized overnight so the the unit got quite hot.
    When we walked in this morning, there was a horrible smell.
    For safety's sake, we need to find out exactly what gases were emitted.
    Please point me in the right direction.
    Thank you.

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP Enterprise Designjet forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Help with my hp design jet 5500

    Hi I recently brought a hp designjet 5500 to set up a canvas business. It came with hp 81 dye inks and hp 81 print heads. I have brought hp 83 uv inks And I just wanted to know if I have to buy hp 83 print heads or can I just use the hp83 inks with the hp81 print heads? Are the two print heads different?
    Any help would be greatly appreciated.

    Try the document I linked below. It might be able to help you find the cause of the issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706
    Binary_Zen (worked at HP )
    Click the white Kudos star to say thanks
    Please mark Accept As Solution if it solves your problem

Maybe you are looking for

  • NFe complementar - Erro no campo nº da NF-e

    Bom dia, Estou com um outro problema crítico de NFe. 1- Como é uma nota fiscal complementar é feito o processo e no momento de salvar, gera uma NF saida. 2- O erro encontrado é que no momento da criação ele pede o numero da nf... o qual o SAP deve ge

  • Macbook Pro cannot connect to Internet via Ethernet / Cosmetic Issues

    My Wireless Router died last night, so I connected my PC Desktop directly to the Modem. It worked like a charm. I then decided to connect my MacBook Pro (2.4GHZ, OS X 10.5.3) to the Modem and...it didn't work. I tried going into the network settings

  • Question for SM35, this may be a easy question, see who have the answer.

    Hi all, here the question i using session method and create a session in SM35. i have process this session i just create, here if i have process the session CAN i process it again?( on the same session ) mean re process the same session. thanks guanw

  • This problem appears while installing oracle 10g on enterprise linux

    Hi All, While installing oracle 10g on enterprise linux 5 this message apear: http://img134.imageshack.us/my.php?image=problemqy2.png More Info: Oracle 10g supports redhat 4 and Enterprise Linux is redhat 5 so I changed the redhat-release to 4 to cou

  • Windows 7 64 bit drivers

    I've installed Win7 64-bit [no problems during install]. While the install works and all drivers are loaded - i do have some doubts. device manager reports the hard disk controller as Standard Dual Channel PCI IDE Controller I tried manually install