Design mode not available when creating or opening a php file - CS5

I am not sure if this is a bug or not. When I create a new php file, it opens in code view. The options to view in design or code and design mode are disabled. If I reset the workspace, does not matter which workspace I am in at the time, then the file is displayed in code and design mode but the options to view in design or code and design are disabled.
If I select code view mode, the design view disappears (as expected) but there is no way to get to design or code and design without resetting the workspace.
Is this considered normal operation? The help system does not hint that there is a restriction on view modes for a PHP file.
Thanks
Walter

Hi Walter,
my DW opens always in that mode which I last worked in with a file and then closed DW. Did you already try this (tranlated from German DW):
Preferences> General> Open new document at startup.
Hans-G.

Similar Messages

Gmail account not available when creating new event

Good evening all,
I have not seen this issue reported yet, so I thought I would throw it out there in case someone else has encountered it.
I set up my GMail account (email, contacts and calendar) and am able to get my events via CalDAV. I can also set it as the default calendar when creating events. However, when I actually open the calendar to create an event, when I first touch the calendar it shows as the colour of my Gmail calendar, second touch opens the edit screen and my Gmail account is not there. If I save the event, it gets added to the local calendar.
I have 3 calendars outside of the local calendar - a work one via ActiveSync, my Gmail one and another Gmail one added as CalDAV which is my wife's Gmail calendar - this one shows as available in the drop down, but not my Gmail one. The descriptions are unique.
I did have to remove my Gmail calendar due to the "unable to authenticate" issue that others noted, so I don't know if that has anything to do with it. As I stated, it is pulling things down, is available to set as default, but no created events can be associated with it.
-m

Hello ironmike and welcome to the BlackBerry Support Community Forums.
To make sure I understand the issue, you removed your Gmail account from your device as were getting an error "Unable to Authenticate". But, when you go to your Calendar and tap on an entry, it shows the colour of your Gmail account and when you go to edit the appointment, it uses the Local calendar to save the appointment and not Gmail?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

OS doc not available when LR is open

When LR4 is open, the only way that I can get to my OS doc is to hide LR - otherwise the doc does not respond. Is this normal? It's quite the nuisance.

You might have put LR into full-screen mode inadvertently. Press the 'F' key on the keyboard and see whether that changes it back. (This cycles through 3 different window modes.)

Goods recipient field not available when creating a service purchase req

We are trying to create a release strategy for purchase requisitions with acount assignments K, F and P. The release strategy would use the requisitioner and goods recipient fields to determine the release group. The issue is when creating a purchase req with item category D for any account assignment, the recipient field cannot be populated. It is greyed out. I tried setting the field as mandatory in the IMG at the account assignment level but it doesn't prompt me for a recipient if item category D is entered. Is there a way to allow this field to be populated? I don't care if the value is transferred to the purchase order but I need it populated to determine the appropriate release strategy. We are not using workflow so that is not an option. Any suggestions would be appreciated.

Srinivas, I appreciate the response but the requisitioner field is not the problem. I can set that field to mandatory. The issue is I cannot populate the recipient field that's located on the account assignment tab of the purchase req. The recipient field can be populated if the item category field is blank but as soon as I populate the item category with D for service, the recipient field is unavailable. Is there a way to populate this field when the item category is D?

Fields in Field Catalog not available when creating condition table

I see that field HIEBO01 to HIEBO12 are available in Field Catalog, but I don't see these fields when creating condition table
Please let me know what I am missing here.
Any insight on this would be really helpful. Thanks guys!

you need to get them added to the pricing structure KOMKAZ or KOMPAZ based on whether you need @ header level or @ item level respectively.
and then add the logic in the sales order user exit for these added field in the pricing_prepare_TKOMK or pricing_prepare_TKOMP...again based on header level or item level.....
Then go back to the field catalog and select from the respective structure and add them, Then you can see them when creating cond tables.
Hope this helps. Hope i havent misunderstood your query.,
Regards
Sai

Child domain not available when creating new mailbox in Exchange 2010

I’ve
installed Exchange 2010 in my environment with a single existing Exchange 2003
server. All current mailboxes are on the child domain. We have 1 root domain
(rootdomain.com) and 1 child domain (child.rootdomain.com). Currently,
we're in the coexistence phase and mailflow is working as expected. Today,
I created a new mailbox using EMC on Exchange 2010 and noticed that the
child domain is not available. Only the root domain is available?
Hopefully, I do not need to reinstall Exchange 2010. How do I go about adding
the child domain?

Did you domain prep the child domain?
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
From a Command Prompt window, run one of the following commands:
Run setup /PrepareDomain or setup /pd to prepare the local domain. You don't need to run this in the domain where you ran Step 3. Running
setup /PrepareAD prepares the local domain.
Run setup /PrepareDomain:<FQDN of domain you want to prepare> to prepare a specific domain.
Run setup /PrepareAllDomains or setup /pad to prepare all domains in your organization.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Since few days, Firefox crashes when trying to open local php files - without using localhost . It shoudn't. I tried to unsinstall everything and reinstall. But it didn't work. I use a mac osX 10..6

I'm a beginner web developper. When I try to open php files, Firefox crashes and open millons of new firefox windows . I have no choice other than forcing Firefox to quit. When I use the localhost adress, it's Ok. But because I usually open the file directly from a folder in my HDD, (it's faster to dothis way) transforming it after with the localhost/~username/file ... it' s quite irritant.

Hi.
I tried logging in as a different user in the OS and that didn't work.
Do you mean that Safari crashed there as well?
If so, that's an indication that the startup disk needs repairing.
Using Disk Utility to verify or repair disks

Data target is not available when creating an info package in BW

Hi,
I am not sure how, but I have accidentally deleted the info packages for one of the info sources. I have created init package successfully, but when I try to create a delta info package for the data mart, the data target( which is an info cube) is not appearing in the data target tab.
Any help in this issue is higly appreciated.
Thanks
Prashant

PRASHANT ASOPA , did you find a solution to this - I am facing a similar situation! I have tried almost everything including deleting and recreating the update rule, recreating the export datasource, activating everything a couple of times and of course cretaing and deleting info packages, but no matter what I do I can't get the system to recognize the data target.
The "funny" thing is that everywhere else, even in the "Show data flow" everything looks right!

[J2EE Deployment SPI:260003]Feature not available when in disconnected mode

hi am am having this error when trying to deploy my application in portal
[04:40:27 PM] #### Deployment incomplete. ####
[04:40:27 PM] [J2EE Deployment SPI:260003]Feature not available when in disconnected mode.
#### Cannot run application HR-Portal due to error deploying to IntegratedWebLogicServer.
[Application HR-Portal stopped and undeployed from Server Instance IntegratedWebLogicServer]
my log error
[04:29:53 PM] Wrote Archive Module to C:\JDeveloper\mywork\HR-Portal\PortalWebAssets\deploy\PortalWebAssets.jar
[04:40:08 PM] oracle.rc.asadapter.connection.ConnectionException: Cannot establish connection.
[04:40:08 PM]      at oracle.rc.asadapter.weblogic.connection.spi.Weblogic10Jsr160Provider.getPresentation(Weblogic10Jsr160Provider.java:73)
[04:40:08 PM]      at oracle.rc.asadapter.connection.AppServerConnectionImpl$PM.getPresentation(AppServerConnectionImpl.java:171)
[04:40:08 PM]      at oracle.rc.asadapter.connection.AppServerConnectionImpl.getPresentation(AppServerConnectionImpl.java:66)
[04:40:08 PM]      at oracle.jdevimpl.deploy.jazn.JaznDataDeployerListener.uploadIdentities(JaznDataDeployerListener.java:234)
[04:40:08 PM]      at oracle.jdevimpl.deploy.jazn.JaznDataDeployerListener.uploadIdentities(JaznDataDeployerListener.java:217)
[04:40:08 PM]      at oracle.jdevimpl.deploy.jazn.JaznDataDeployerListener.willDeploy(JaznDataDeployerListener.java:97)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.ListenerSupport.fireWillDeploy(ListenerSupport.java:198)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:88)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:457)
[04:40:08 PM]      at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:217)
[04:40:08 PM]      at oracle.jdevimpl.deploy.common.ModulePackagerImpl.deployProfiles(ModulePackagerImpl.java:86)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.ModulePackager.deployProfiles(ModulePackager.java:63)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.ModulePackager.deployImpl(ModulePackager.java:52)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:457)
[04:40:08 PM]      at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:217)
[04:40:08 PM]      at oracle.jdevimpl.runner.adrs.AdrsStarter$7$1.run(AdrsStarter.java:1774)
[04:40:08 PM] Caused by: java.io.IOException
[04:40:08 PM]      at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:196)
[04:40:08 PM]      at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:84)
[04:40:08 PM]      at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
[04:40:08 PM]      at oracle.rc.asadapter.weblogic.connection.spi.Weblogic10Jsr160Provider.getPresentation(Weblogic10Jsr160Provider.java:67)
[04:40:08 PM]      ... 28 more
[04:40:08 PM] Caused by: javax.naming.NamingException [Root exception is java.rmi.UnexpectedException: Marshalling: ; nested exception is:
[04:40:08 PM]      java.rmi.ConnectException: Could not establish a connection with -3508319463259142590S:127.0.0.1:[7101,7101,-1,-1,-1,-1,-1]:DefaultDomain:DefaultServer, java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination; nested exception is:
[04:40:08 PM]      java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination]
[04:40:08 PM]      at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:86)
[04:40:08 PM]      at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:32)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:685)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:469)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
[04:40:08 PM]      at weblogic.jndi.Environment.getContext(Environment.java:315)
[04:40:08 PM]      at weblogic.jndi.Environment.getContext(Environment.java:285)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
[04:40:08 PM]      at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
[04:40:08 PM]      at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
[04:40:08 PM]      at javax.naming.InitialContext.init(InitialContext.java:223)
[04:40:08 PM]      at javax.naming.InitialContext.<init>(InitialContext.java:197)
[04:40:08 PM]      at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:178)
[04:40:08 PM]      ... 31 more
[04:40:08 PM] Caused by: java.rmi.UnexpectedException: Marshalling: ; nested exception is:
[04:40:08 PM]      java.rmi.ConnectException: Could not establish a connection with -3508319463259142590S:127.0.0.1:[7101,7101,-1,-1,-1,-1,-1]:DefaultDomain:DefaultServer, java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination; nested exception is:
[04:40:08 PM]      java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination
[04:40:08 PM]      at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:57)
[04:40:08 PM]      at weblogic.security.acl.internal.RemoteAuthenticate.authenticate(RemoteAuthenticate.java:90)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRemotely(WLInitialContextFactoryDelegate.java:747)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:679)
[04:40:08 PM]      ... 41 more
[04:40:08 PM] Caused by: java.rmi.ConnectException: Could not establish a connection with -3508319463259142590S:127.0.0.1:[7101,7101,-1,-1,-1,-1,-1]:DefaultDomain:DefaultServer, java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination; nested exception is:
[04:40:08 PM]      java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination
[04:40:08 PM]      at weblogic.rjvm.RJVMImpl.getOutputStream(RJVMImpl.java:352)
[04:40:08 PM]      at weblogic.rjvm.RJVMImpl.getRequestStreamForDefaultUser(RJVMImpl.java:689)
[04:40:08 PM]      at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:50)
[04:40:08 PM]      ... 44 more
[04:40:08 PM] Caused by: java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination
[04:40:08 PM]      at weblogic.rjvm.RJVMImpl.ensureConnectionEstablished(RJVMImpl.java:334)
[04:40:08 PM]      at weblogic.rjvm.RJVMImpl.getOutputStream(RJVMImpl.java:350)
[04:40:08 PM]      ... 46 more

Caused by: java.io.IOException: Destination unreachable; nested exception is:
+[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination+
Is the WebLogic server running?

Commenting functionality not available when I open a pdf in air application

commenting functionality not available when I open a pdf in
air application. Adobe documentation says that is expected with
adobe air 1.0 but I still have the same problem even if I use the
latest air runtime

Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Curtain mode not available

Hello, I'm new to ARD ... running ARD 3.0 Unlimited, created an install package an installed on the target PowerMac G4 running OS X 10.4.8, opened the services ARD, Remote Login, and File Sharing (FS for general use) services in the firewall, and I can monitor or control the client reliably.
I did create an admin account for ARD in the Package utility - this user has all possible rights but I didn't allow VNC or Guest request.
When I try to use the Curtain Mode while in Control Mode the Curtain Icon is greyed out, mousing over says "Curtain Mode not available for "mac name"", and when I try to directly connect via Curtain Mode I get the error "Could not change to Curtain Mode, (2nd line) an error occured on this computer"
Pretty vague, anyone know what's needed for Curtain Mode to be available/work? - thanks - KR

Thanks for your comments Brian - I'll answer each:
Curtain mode should work on any system running 10.4 and ARD 3.
KR - that's my understanding. All the systems are running OS X 10.4.8 and see below on ARD version...
Have you upgraded the client (G4) to 3.x? 2.x is the default installation.
KR - good question, I created the client package via Create Client Installer in ARD and manually installed it on the G4. This should have upgraded the ARD client to v3, right? I haven't found a way to verify the ARD client version (suggestions gladly received!) except the recorded version number in com.apple.ARDAgent.plist - which lists 3.000000 as the version, which I'm assuming means v3.0
Is the G4 headless? Curtain mode only works on machines with monitors attached.
KR - that's good to know - the G4 does have a monitor, keyboard, and mouse attached. Along those lines the G4 has the factory installed video card and the LCD display is in 1280x1024 res. I tried 1024x768 res, same result...
Also, in case it makes a difference - I have the Sharing/Firewall on, Services Personal File Sharing, Remote Login - SSH, Apple Remote Desktop, Apple Remote Events, and Network Time allowed. The Macs are in my lab, all on a 100BaseT hub with no firewall or NAT in between each other.

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

System Type ERP not available while creating Buisness System For ECC in SAP Sourcing 9.0

Hi,
I need to import Master data in SAP Sourcing but when i am uploading master data i am getting this errror
Business system ECQCLNT340 does not match with local SAP Sourcing System ID SOURCING.
i have followed the steps in config guide of SAP ERP with SAP Sourcing.
when i am creating business system in SAP Sourcing system type ERP is not available.
i have also attached the error file, please check
--------------Version---------------
ECC 6.0 Ehp6
SAP Sourcing 9.0 on NW7.3 Ehp1 on IBM DB2
Thanks and Regards,
Murtaza Najmi

Thanks you Prasad,
this issue has been resolved and i have completed the installation part of SAP Sourcing and Contract generation.
Now , I am getting error while uploading clause document, my functional team member are not able to upload clause document. kindly suggest.
----------------------Error Description---------------
Login with buyer link into the system-> it has all authorizations
then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
Thanks and Regards,
Murtaza Najmi

Video mode not available on this device iphone 6

When I try to use my usb e-banking the iphone gives me this answer!!
video mode not available on this device
with the iphone 4s it works correctly!
Help

HIIIIIII GUYS )))))))))))) I FIND COOOOOL, NO NO SUPEEER COOOOL SITE RRYOUTUBE.COM !!!! JUST TYPE RR BEFORE YOUTUBE FOR EXAMPLE www.RRyoutube.com/watch?v=o_1aF54DO60 !!! THIS SERVICE SOLVE PROBLEM WHITH YOUTUBE ERROR "Sorry, this video is not available on this device" AND LET YOU REPEAT VIDEO FOR INFINITE!!!!! ))))))
P.S SORRY FOR MY ENGLISH

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11. I can see the tables and views in the database tab, but no stored procedures. If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

Ben thanks for the reply!
Yes that is the process I am following:
In Dreamweaver, open the page that will run the stored procedure.
In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
Enter the ColdFusion Data Source user name and password.
At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated. I need to make sure it is pulling from the correct server but right now it appears to be working.
Thanks
Dwight

Design mode not available when creating or opening a php file - CS5

Similar Messages

Maybe you are looking for