Design Notes Dialogue Box Not Opening

I have Macromedia Dreamweaver 8. I can open the Design Notes dialogue box on all of my sites...except for one. When I try right-clicking on the file, or going to Site >> Manage Sites, and choose Design Notes it doesn't work. The dialogue box just doesn't open. But, when I go to another site and try it, then the dialogue box works fine.
I have tried it on multiple files in this site and it just doesn't work.
Any help is appreciated.
Thanks.

I found the answer!! It is located on another post here: http://forums.adobe.com/message/830071#830071
Solution: In Manage Sites, copy your site and delete the old site definition.
Now the design notes dialog pops up.

Similar Messages

  • Adobe Designer not opening in NWDS

    Hi,
    Adobe Designer not opening in NWDS. When I open it as stand alone, it works fine. I Re-installed NWDS. Still no luck.I did tick the adobe Designer option while installing the NWDS setup.
    Thanks,
    Prasanna

    HI Prassana,
    Close the developer Studio, and from the C:\Program Files\Adobe\Designer 6.0, open the designer by clicking on FormDesigner.exe
    Then close designer and then open the NWDS.
    Regards,
    Siddhartha

  • Bought Premier Elements yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until

    Bought Premier Elements 13 yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until my pw is recognized. Accept agreement. Agreement screen disappears and I'm back where I started. Try to open video clips with editor again and get the same demand to log in. Please advise asap. thx

    Oldcameraman
    Please do not duplicate a thread. The threads are answered as soon as possible. We are not Adobe. Just user to user.
    I have answered your most recent of the duplicates
    Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work
    It is uncertain just how far we can go to help you since you do not appear to have Premiere Elements any
    longer.Seems you demanded a refund from Adobe Chat, got it, and now are left with a non purchased program which I
    am not sure can be used.
    Duplicates tend to confuse the person asking the question as well as those attempting to reply. As I suggested in the
    above mentioned thread, try to sort out your situation with Adobe via its Adobe Chat.
    ATR

  • Output preview works only when preview dialogue box is open?

    The output preview setting certainly takes effect, but only when the output preview dialogue box is open, so that accurately previewing images in reading mode is not possible; it's only possible to see a preview by going to an image and opening the OP dialogue box. As soon as the OP dialogue box is closed, the image reverts back to its pre-preview state. This can't be right!

    Thanks for your feedback. I had tried to navigate with the dialogue box open using the "hand", which didn't work; I see now that you can still go from page to page with the box open using either keyboard command or menu arrows.
    I was actually incorrect in referring to "reading mode"; I meant to say "full screen" mode. And again, since the cursor doesn't act as a cursor but rather as a pinpoint when the dialogue box is open, I incorrectly assumed that all navigation (including full screen mode) was disabled. This, I now see, is not the case.

  • I keep getting the same dialogue box upon opening Firefox but don't know what to do about it

    I keep getting the same dialogue box upon opening Firefox but don't know what to do about it "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features." I have gone to tools - general tab - browse files - but it wont let me browse or set a place to staore files. Any ideas?

    Try the procedures shown in this link - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • Cannot get the past dialogue box to open in illustrator since upgrading to Yosemite. Click it but nothing happens. Also File Open works intermittently. Is this a finder preference issue?

    Cannot get the past dialogue box to open in illustrator since upgrading to Yosemite. Click it but nothing happens. Also File Open works intermittently. Is this a finder preference issue?

    one of those days --- it's the PLACE dialogue box

  • Mode Design not Open

    Hi, friends, I type from Brazil.
    My computer MacBook Pro with SO Lion
    1. My Eclipse with plugin Flex Builder
    not open perspective Flash Project
    2. In the my projects Java+Flex the same NOT open mode Design Flash
    how to solve?
    Thank's.

    Are you using Windows 8 or 8.1 ?
    The Muse 2014 release is incompatible with 125% Display scaling via the Windows Control Panel in Windows 8 and 8.1. The only workaround is to switch to 100% or 150% Display scaling.
    Thanks,
    Sanjit

  • Weird (old) camera raw dialogue box when opening .RAW files

    Hi guys,
    I am getting a strange dialogue box (attached image) when I open my RAW files.
    These RAW files are produced by a Fuji SP-3000 scanner.
    If I scan one negative, two files are produced — a RAW file and a .LI file (image also attached).
    When I punch in some pixels into the dialogue box, the image then opens and is just a blurred mess of pixels (actually, the patterns are kinda cool) but they're not the image I'm after.
    I am wondering if anyone has had any experience with this dialogue box and possibly how to solve it and get an actual image.
    One of the main problems I think I have is that I don't actually know the pixel dimensions of the image to begin with, so I am stabbing in the dark when I punch in pixel values.
    Any advice/help would be greatly appreciated.
    Cheers!

    See here, for instance:
    Photoshop Raw format
    Photoshop Raw format
    The Photoshop Raw format is a flexible file format for transferring images between applications and computer platforms. This format supports CMYK, RGB, and grayscale images with alpha channels, and multichannel and Lab images without alpha channels. Documents saved in the Photoshop Raw format can be of any pixel or file size, but they cannot contain layers.
    The Photoshop Raw format consists of a stream of bytes describing the color information in the image. Each pixel is described in binary format, with 0 representing black and 255 white (for images with 16‑bit channels, the white value is 65535). Photoshop designates the number of channels needed to describe the image, plus any additional channels in the image. You can specify the file extension (Windows), file type (Mac OS), file creator (Mac OS), and header information.
    In Mac OS, the file type is generally a four-character ID that identifies the file—for example, TEXT identifies the file as an ASCII text file. The file creator is also generally a four-character ID. Most Mac OS applications have a unique file creator ID that is registered with the Apple Computer Developer Services group.
    The Header parameter specifies how many bytes of information appear in the file before actual image information begins. This value determines the number of zeroes inserted at the beginning of the file as placeholders. By default, there is no header (header size = 0). You can enter a header when you open the file in Raw format. You can also save the file without a header and then use a file-editing program, such as HEdit (Windows) or Norton Utilities® (Mac OS), to replace the zeroes with header information.
    You can save the image in an interleaved or non-interleaved format. If you choose interleaved, the color values (red, green, and blue, for example) are stored sequentially. Your choice depends on requirements of the application that will open the file.
    Note:  A Photoshop Raw image is not in the same file format as a camera raw image file from a digital camera. A camera raw image file is in a camera-specific proprietary format that is essentially a “digital negative,” with no filtering, white balance adjustments, or other in-camera processing.
    From:
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7758a.h tml#WSfd1234e1c4b69f30ea53e41001031ab64-773ea

  • When password security-setting dialogue box is opened, the bottom can't be seen or moved

    Using Acrobat XI Pro on my Dell PC, I was trying to add password protection to the document.  When I click on the "encrypt with password" button, the password security-setting dialogue box pops up, and I can enter the password.  However, the bottom of the page is not visible and I can't move it to click the "ok" button.  Any suggestions?

    Which Acrobat XI Pro are you using? I think you experience the same problem that was reported on this forum in the past. I believe this problem was fixed in one of the recent versions (11.0.07??). Upgrade to the latest version and the problem should go away.

  • Lifecycle Designer  not opening in NWDS

    I installed Adobe LiveCycle Designer v 7.1.
    When I edit the interactive form from NWDS v 7.0.09, it says "could not find the required product, Install adobe Live cycle designer".
    What could be the problem? Any help please.

    hi,
    for this we
    Required:->
    1.     Acrobat Reader\Adobe7.0…or higher
    2.     Adobe Life Cycle Designer For SAP.
    3.     Adobe Document Service.
    4.     for working with ADS with we need credential installed in server.
    first 3 are necessary for lifeCcle designer to open.
    Regards
    Trilochan

  • Adobe Livecycle designer not opening up --urgent

    Hi ,
    I have insatalled Adobe form designer in my systerm ..
    I am getting an exception NO Authority raised.
    I have not intalled ADS .. but I am not trying for any runtime . I want to just open up the designer in SFP .
    any idea ?
    Regards
    Abhilash

    hello Raja this issue has been solved the issue was with the Authority . I installed the SAP GUI and with proper authorization now it is working fine ...
    I need another help from you in SFP ( am creating a form for the first time although i have posted many queries ) will the biding btw context and layout designer happen automatically .. I mean to say if i create a contxt and drag on tothe form builder will this take care of the binding ( or do i need to go to the binding tab and assign it to the context element ) here the ADS is getg configured only so mean while I am trying out the designer part ..
    pls send me any link related to binding

  • My scan dialogue box wont open...how do i fix this

    It was working fine then it had an error in the middle of scanning...any ideas please?

    Hi,
    Please try the steps from the link below to resolve your issue.
    Scanning
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Accidentally created an On My Mac mailbox  Now the mail dialogue box is open and frozen, with a soft pinging sound when I try to close...Can't restart computer until I close Mail, but can't close Mail.

    This is my first day with my Mac and my hunch is there's a simple fix for this.

    Try force closing and rebooting.
    >Force Quit>Mail

  • Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0

    Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
    Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
    Uninstalled Acrobat 9, reinstalled, still same problem.
    Help please!

    Yes I can it only happens in the browser..
    I reinstalled Windows on my machine and started over a couple of weeks ago.
    When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
    I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
    Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
    Ever since then I get the error when something is downloaded and opened in the browser.
    Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
    Not sure what to do..

  • Merge to HDR Pro Dialogue box won't open.

    I'm not sure if this is the correct place for this question but here goes. I can't get the dialogue box to open in Merge to HDR Pro in CS5. After I import the files it seems to go thru the process but then PS just goes blank as if I just opened it.

    Proper place is the photoshop forum.
    You could try and replace the preference file and see if thats the culprit. On windows hold down ctrl, alt, and shift key at photoshop's bootup. I don't know the Mac's equivalent. You can also search for the preference file itself and delete or move to a safe location and let photoshop recreate the file. By moving the file, you can always put it back, if your not sure whats happening.

  • Removing the "Security Warning" dialogue box on default when a PDF is opened

    Hey
    I have created a pdf document with a specific data written using iText Libraries. I have actually created a beacon that generates a notification sent to the owner's email when the pdf is opened.
    The code is under OpenAction. The problem I am facing is that as I open the document, a dialogue box is opened saying "Security Warning" The document is trying to connect to : URL. How do I get rid of this dialogue box. ? I don't want this dialogue box to appear and allow the connection by default. I have tried playing with the Trust Manager - but that doesn't seem to be the solution, as  am trying to execute my PDF document at a remote machine.

    There was a lot of media fuss years back when it was found out that PDF files could "phone home", i.e. do what you want to do. So Adobe put this warning in. It wouldn't be much good as a warning if the creator of a PDF could choose to turn it off!
    Document creators like to track people opening documents. Privacy advocates consider this a breach of privacy. The latter group shouts louder. http://en.wikipedia.org/wiki/Phoning_home

Maybe you are looking for