Design Notes & Reports

Hi all,
We currently are using DW MX 04. As there are so many of us
using these files we have design notes enabled. When I've tried to
run reports on a status that the file is in, I've gotten the
message that Design notes are not enabled, or at times just a
partial listing of the files in a certain status, other times DW
just crashes.
I've found some references to "Cloaking" and I know Cloaking
can affect the reports out come but even when I've gone in and
deselected the "Enable Cloaking" and still not all of the files in
the requested status are showing up.
Any ideas on how to get accurate reports from design notes??
Thanks for any suggestions!!! T

Design notes are also used internally by DW for integration
with Fireworks,
Flash and Contribute.
"It's really annoying me and didn't happen in CS2."
Do you mean DW MX 2004 or DW 8? (there was no CS2).
I've always had some Design Notes in DW even though I've
never used them and
I switch them off. I've just learned to live with them.
Regards
John Waller

Similar Messages

  • Proj Server 2010 Dashboard Designer Not Reporting Future Capacity

    With information from Project Server 2010 (PWA) and using Dashboard Designer I’ve designed a time-phased report (by month) to show past effort (Measure - Actual Regular Work) against capacity (Measure – Capacity) which displays accurate information. 
    I’ve designed a similar report to show future planned work (Measure – Remaining Work) against capacity (Measure – Capacity). 
    Planned work reports accurately but for some reason this report does not show future capacity. 
    Resources in the pool have latest available dates.  Can someone please tell me what I need to do to report future capacity in Dashboard Designer? 
    Thanks in advance!

    Resource Capacity Settings are set to:
    Months behind : 1
    Months ahead: 12
    The report uses Portfolio Analyzer Cube. 
    The OLAP cube builds every 24 hours.  Database date range is “Use the earliest project start date and the latest project finish date”. 
    Thank you for your help.

  • Designing the report

    Hello All,
    Can someone nudge me in the right direction... A tutorial on the usage of CR XI R2 would help me design the report. Does anyone have  a reference for this kind of material? 
    Here's what I have so far. I don't know if this is enough information. Let me know if you would like me to explain more. I hope I am not confusing you.
    I have a table of clients, debtors and accounts.
    The table I am using.
    client: clt
    debtor: dbr
    acct: acc
    clients: clt_name1
    debtors: dbr_name_1
    acct: acc_desc
    I have to generate a report for each clients in our Company. Each clients has ten debtors or more with an account description underneath and the debtors information such as account name: dbr_name1, file no: dbr_no, and client ref#: dbr_cli_ref#.
    I have a couple of questions:
    1) How do I generate a report to each clients with only their debtors information using crystal reports xi release 2.
    2) How do I generate the report for the last 30 days.
    3) How do I generate the report for only active, closed and paid if not send a message.
    ,For example: Month End report as of 2009
    Our client name is : clt_name and the client ID : dbr_client
    clt_name1 dbr_client
    MONTH END REPORT AS OF 2009
    1)dbr_name1 dbr_No. dbr_client_ref dbr_assn_date dbr_last_charge_date_O
    acc_desc
    2)dbr_name1
    acc_desc
    3)dbr_name1
    acc_desc
    Thanks!
    Sophal

    Hi
    You can refer to the Crystal Reports XIR2 User guide for your reference.
    You can download it from[here|http://help.sap.com/businessobject/product_guides/crxir2/en/xir2_cr_usergde_en.pdf]
    Hope this helps!!
    Regards
    Sourashree

  • How to design multitab report in rtf in oracle apps r12

    Hi,
    How to design multitab report in rtf in oracle apps r12
    one consultant working on a multiple projects in this report ....how to design rtf by using multi tab.
    thanks,

    Hi,
    <?if://P_CONSULTANT_NAME='' and P_CLIENT_NAME= ''?> means print the content below this condition if both consultant name and client name is null in xml.
    <?if://P_CONSULTANT_NAME !='' and P_CLIENT_NAME != ''?> means print the content below this condition if both consultant name and client name is not null in xml.
    <?if://P_CLIENT_NAME!='' and P_CONSULTANT_NAME = ''?> means print the content below this condition if consultant name is null and client name is not null in xml.
    <?if://P_CONSULTANT_NAME!='' and P_CLIENT_NAME = ''?> means print the content below this condition if consultant name is not null and client name is null in xml.
    please share your sample rtf and xml file so that i can have a look at it and help you if i can.
    Thanks,
    Vinod

  • How to design crystal report multi column

    how to design crystal report multi column
    for example
    id              1001             id                 1002     
            id            1003
    name        dinesh          name            dk                 name       
    dkn
    address   kota             address       jaipur             address     delhi
    pin          3260356        pin              546332            pin       
    675942
    id              1004             id                 1005       
               id            1006
    name        dinesh1       name            dk1                     name       
    dkn
    address   kota1           address       jaipur1                 address     delhi
    pin          32606           pin                546345                pin       
    675942
    and so on....................

    DN
    I am afraid you have come to the wrong place.  MS does not support Crystal reports except for
    "Microsoft supports setup and installation for the Crystal Reports products shipped with the Professional and Enterprise Editions of Microsoft Visual Basic for Windows versions 3.0, 4.0, 5.0 and 6.0."
    For other support you need to contact
    For other Crystal Reports support, please do not contact Microsoft. Please contact Crystal Decisions (formerly Seagate Software), which now owns and supports Crystal Report Writer.
    http://support.microsoft.com/kb/100368
    Wanikiya and Dyami--Team Zigzag

  • Design a report for mainframes data.

    Hello All,
    I was given a requirement to design a report using BI Publisher to burst emails with attachments, where the input file is coming from Mainframes ( fixed positioning text file which also includes the context of the attachments).
    The record layout of the input file from mainframes has the following fields:
    1) Id# positions 1-6
    2) Program Code positions 7-10
    3) Document sort sequence positions 11-12 packed #
    4) Line text positions 13 - 100
    Notes:
    1) This email should be send for the ID# which then needs to be joined to another table in DB to get the email address for that ID#.
    2) This is 100 (for "abc"), 200 (for "xyz") , 300 (for "pqr").
    3) The attachments need to be in a specific sequence and this assigns a "1" to all "abc", "2" to all "xyz" and "3" to all "pqr".
    4) This is the text that should be printed as an attachment.
    We use BI Publisher Standard Edition 10.1.3.4.0.
    Please give me some ideas on how to accomplish this task.
    Thanks in advance.
    Tracey

    Any ideas please??

  • Why not reporting on DSO is better than Cube,DSO is more denormalized?

    Hi,
    As it is said that for better reporting response, all dataware house solution are denormalized. Normalized tables take more time in executing report.
    Then why not reporting on DSO is better than Cube?
    Cube is said to have multidimensional structure. But DSO has more denormalized data than cube.
    Please correct me..." Cube is not completely denormalized". It has links between fact table and dimension tables.
    Thanks !!

    Cube reporting is the part of standrad datawarehousing design. Please read kimballs DWH books for more details.
    Please help us keep the forums clean and open useful information only.
    For more information search on help.sap.com and you will get lots of material on this topic.
    Regards.
    Den
    Edited by: Dennis on Nov 2, 2010 10:57 PM

  • Error CDG-03362 while capture design of Reports

    When I try to capture design of reports in Designer6i
    it returned an error message
    CDG-03362 WARNING: No repository element found to map application logic on : 'Formular'
    and the code of the formula don't come into the repository.
    Do anyone help me How to solve this issue?

    Ramana,
    Although you eventually want to use JHeadstart, reverse engineering forms to Designer is not an issue within the scope of this forum.
    Could you please post this issue in the Designer forum, or log a Metalink issue?
    Thank you,
    Steven Davelaar,
    JHeadstart Team.

  • NWBC html rendering of BO Design Studio Reports

    Despite our efforts on securing an updated system landscape with latest patches and support packets, we are unable to get successful
    rendering of BO Design Studio Reports on NWBC html. The problem is illustrated below:
    Any suggestions?
    Kind regards,
    Stein

    Hi Stein,
    I have seen something similar to this recently. How are you deploying the Design Studio reports, are they running on the SAP NetWeaver Portal or on the SAP Business Objects Platform server? I wonder if you are using the portal then maybe there are some issues since it is generally not possible to run the portal inside of the NWBC (they don't play nicely with each other).
    Is is only when you use IE? Have you tried using another browser like Firefox of Chrome? Have you tried running the report outside of the NWBC (e.g. directly launch the URL in the browser)?
    I just found this note which might help you http://search.sap.com/notes?id=0001894594 it talks about what looks like a similar issue.
    Hth,
    Simon

  • Best Practices Document for Creating/Designing Queries/Reports

    Hello all,
    I hope I am not posting my very first question in a wrong forum. I am looking for any document(s) related to Best Practises for Designing Queries/Reports using BeX Query Designer (or any other tool for that matter). I did some searching, but could not find anything related to what I am looking for.
    Thanks in advance!
    Amit

    Hi Amit:
       The documentation below might help.
    Regards,
    Francisco Milán.
    Chapter 6 of "Performance Tuning for SAP BW"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10fb4502-111c-2a10-3080-df0e41d44bb3?QuickLink=index&overridelayout=true&15882789067966
    "30 technical tips and tricks to speed query, report, and dashboard performance" by Dr. Bjarne Berg
    http://www.google.ca/url?sa=t&rct=j&q=30%20technical%20tips%20and%20tricks%20to%20speed%20query%2C%20report%2C%20and%20dashboard%20performance&source=web&cd=2&ved=0CFQQFjAB&url=http%3A%2F%2Fcsc-studentweb.lr.edu%2Fswp%2FBerg%2Farticles%2FNW2010%2FBerg_NW2010_30_tips_for_SAP_BI_performance_v4.pptx&ei=oVIYULT3HIOJ6AHUuICADw&usg=AFQjCNGZnqACv5u3ai81xvKH1Kq-qckavg
    "Improving Query Performance by Effective and Efficient Maintenance of Aggregates" paper by Naween Kumar Yadav.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906de68a-0a28-2c10-398b-ef0e11ef2022?QuickLink=index&overridelayout=true&43426414363758
    "Summary of BI/BW 7.0 performance improvements" blog by Jens Gleichmann.
    http://scn.sap.com/people/jens.gleichmann/blog/2010/10/12/summary-of-bibw-70-performance-improvements
    "BEx Front end Performance"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40955430-dc1c-2a10-349a-fa181307d7df?QuickLink=index&overridelayout=true&15882789070879
    "Performance Optimization of Long Running Queries Using OLAP Cache" paper by Raghavendra Padmanaban T.S. and Ananda Theerthan J.
    https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f048c590-31a4-2c10-8599-bd01fabb93d4&overridelayout=true
    "BW Performance Tuning" paper by Dr. Thomas Becker and Alexander Peter
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/701382b6-d41c-2a10-5f82-e780e546d3b6?QuickLink=index&overridelayout=true&15878494103977
    "Performance Tuning for SAP Business Information Warehouse" paper by Alexander Peter and Uwe Heinz
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c?QuickLink=index&overridelayout=true&5003637415559
    "How to… Performance Tuning with the OLAP Cache"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a?QuickLink=index&overridelayout=true&5003637412341
    Queries section of "Performance Tuning Massive SAP BW Systems - Tips & Tricks" paper by Jay Narayanan.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94?QuickLink=index&overridelayout=true&5003637414215

  • Design a report off a log file

    Crystal reports version XI
    I would like to design  a report off a log file (with .log extention).
    How would i go about it? (like data source etc)
    Any input iappreciated.
    Thanks in advance, padie

    Following SAP note could be useful too:
    Follow the link below:
    https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=proxies&adv=false&sortby=cm_rnd_rankvalue&start=1&sortmode=true
    and search for SAP note "1213781 - How to generate a report based on Internet Information Server (IIS) log files"

  • The Amazing Disappearing Design notes

    Every day I go into Site Definitions and add Design Notes to
    my File View Columns, and the next day I have to do it again, as
    they are no
    longer in my Column View . Any thoughts in why this might
    be? I'm using DW 8.02 on a PC with Windows XP SP2.
    Thanks...
    DB

    This seems to be a problem that many of us are facing after update 1.0.2. Check the discussions on this thread http://discussions.apple.com/thread.jspa?threadID=1099428&tstart=0 Apple must have increased the power to the Wireless radio, and the antenna to increase the reliability of connections and reduce call drop, thereby causing battery life to reduce. We have reported it to apple, and hopefully, this should be fixed in the next update. As of now, after performing the reset/charge dance as described in the thread about, my phone stands at 1 hour 22 minutes of usage and 1 day 16 hours of standby with 80% charge remaining.

  • Cant use Design Notes

    Hey Folks
    I don't often use this feature, but last time i did - it work.
    Now, when i try add a new design note via File > Design Notes... nothing happens.
    I tried shutting down  DW and re-opening, but still not. It seems to be for all files, not a specific file only.
    Using CC 2014.1
    Any ideas?
    Thanks!

    I have been using JBuilder 2005 Foundation for a few years but then lost it from my computer because of a computer virus.
    I now have had the virus removed and wish to reinstall the JBuilder 2005 Foundation but don’t remember how I did that.
    So I took your advise and tried:
    http://www.borland.com/products/downloads/download_jbuilder.html
    But I find that if I then click “downloads” at the top of the resulting web page I just get the whole screen showing an error message labelled “Exception report” of type “java.lang.NullPointerException”
    If I click the “JBuilder Enterprise Trial” or the “JBuilder Turbo” options then the web page I come to only displays some downloads other than JBuilder 2005 Foundation
    And I have tried clicking each and every option at the top of the web page including “products” and then “JBuilder” with no luck. I have also put in “JBuilder 2005” in the search option at the top of one of the web pages and although it gives me some info on JBuilder 2005, I still cannot see where I can get the free download.
    I have also Googled “JBuilder 2005 download free” but had the same kind of problem with every single one of the web sites I tried!
    I would very greatly appreciate any insight into where I can find such a download on this (or any) web site.

  • Difference Between Web application design and Report Designer

    Hi,
    I have searched in the forum as well i Google it but still i am not clear the difference between Web application Designer and report Designer , why especially we go for WAD ? and  what is not possible in Report designer which we can do in WAD  Please some one explain me that would be great helpful to me. i am having lot of confusion in this issue.
    thanks,
    Gal

    Hi,
    The Report designer is completely for formating of your query and results. Here you have the flexibility to design your query(one/more) results in your own way.
    The WAD is for displaying various web items at one short for a single/multiple query. And here you have the flexibility to do the XML coding on the web items, but not as much you have the flexibility on Report Designer.
    But, Report designer will have more performance issues than WAD. So, generally it helps when you need extreme formating of your reports.
    Hope this clears your doubt.
    Regards,
    Srinivas.

  • /711 not reporting Supplemental payment for PA

    Hi Gurus,
    We are experiencing the following issue
    We are on TUB 60 BSI 9.0, when we pay an employee a Supplemental payment of 100,000 (via IT 15) over the regular period salary of $ 3500, we expect the following:
    /411 = $42 (which we see in the RT)
    /711 = $ 7000 (instead we see an amount of 3500 odd)
    This means that Supplemental Wages are taxable but not reportable, but we dont have the procesing class 69 as such; it is 1 (Taxable earning)
    /411 is considering a sum of supplemental wages of $100,000 and its basic salary $ 3500 for reaching $42 ($7000.00 *0.6% = $42.00); but the same is not reflected on /711
    TUB 57 updated as -
    TAXAU / TAXTY CEILG     TXRTE
    PA        /  11         7000       0.006
    Your help is much appreciated!

    Hello,
    What you are experiencing in your system is standard behaviour of it. Kindly find the explanation below
    About Tax Type 11:
    As you may know, in BSI Tax Factory script we have a parameter Year Wages (YW:), that is nothing else than the total of taxable wages for this tax type/tax authority, or in other words wage type /7** from TCRT table for the corresponding tax company/tax authority/tax type.
    For tax type 11, SAP payroll sends to BSI Tax Factory Script the year wages of tax type 10 - Federal.
    What happens here: if you configure tax type 11 in tax model after employee reaches ceiling for tax type 10 Federal, payroll will send to BSI Year Wages of $ 7,000. As tax type 11 is a self-adjusted tax type, BSI will calculate the tax amount for $ 7,000, which is the ceiling for tax type 11 as well. If you force a retro from Period 01, you will send the Year Wages according to each payroll period, and, therefore, wage type /711 will be calculated accordingly.
    This is the way that the SAP and BSI systems were designed to work.
    With Regards,
    S.Karthik

Maybe you are looking for