Design pan missing

I have just dowload the 4.7 version and when I open a project I can only see the source pan and dont have the design pan can someone please help.

Adobe has removed the design view in 4.7 completely without a replacement for this truely fundamental part of the IDE.
They didn't adapt the "Flex in a Week" tutorial.
They didn't even answer you for two months.

Similar Messages

  • Cyan Highlight Behind Text in Design Pane

    Hi, Could anyone tell me why some of my pages have a cyan colored highlight behind the text in the design pane. It does not happen to all of my sites and am wondering why this particular site that is doing this, is doing his.
    File is a .asp extension, but other asp pages for other sites do not do this. Have checked code rewriting in prefs and do not see an instance where cyan is supposed to be implemented behind text. It's not in the style either and live page looks fine.
    Considered putting this thread go in App Dev forum instead but seems a general DW useablity issue as opposed to a dev issue. Please let me know if I should resubmit there.
    Using DW CS4 on 64 Bit Vista. What other details can I provide??
    thanx,
    jeff

    jeffo1477 wrote:
    Hi, Could anyone tell me why some of my pages have a cyan colored highlight behind the text in the design pane.
    The cyan highlighting indicates untranslated live data on a page that contains server-side code. Normally, it is applied only to dynamic text like this:
    If it's being applied to ordinary text, it suggests there's something unusual about your server-side code that's causing Dreamweaver to highlight the text in this way. The preference that controls the colour of the highlighting is in the Highlighting category of the Preferences panel.

  • Crystal Designer option missing in SAP B1

    Hi
    I have re-installed Crystal 2008 and SAP Crystal add on in my PC, Now I donu2019t see the Crystal designer tab option available which I had before. I followed the same steps which I have done before. I have .net framework 3.5. Not sure what I have missed to get this tab. any idea?
    Mohan

    Go to add remove program > click change/modify for the integration kit and kae sure to add "SAP tool bar".
    hope this help.
    Regards,
    Adil

  • Design option missing for Fluid Grid layouts (was:In dreamweaver CC, I created a new fluid grid page, but the options to edit the page...)

    Hi, in dreamweaver CC, I created a new fluid grid page, but the options to edit the page are limited to code / split / live. The design optin is missing and I need it to move around the fluid grid to position my elements that I have created.
    Thanks

    Hi Raymi,
    Like Ben suggested, you can vote for the feature using the link provided.  From what I understand, the product team is collecting feedback on the limitations of Live View for FG layouts and improving experience on that front. It would help if you could provide a list of limitations with the current workflow.
    Thanks,
    Preran

  • Import design objects - missing something

    Hi
    I have two files with tpt extensions XI2_0_SAP_APPL_4.6C_48_01_classic.tpt and XI2_0_SAP_APPL_4.6C_48_01.tpt to import objects corresponds to rosettanet design objects I got from SAP market place. I did place them in respository_server/import directory as mentioned in the installation guide. When tried import object from integration builder it is not recognizing it. Why?
    I am running XI3.0, is that the reason it is not recognizing XI2_0 objects?
    Also I did try making them as tpz file after zipping the above files and did add a metadata.properties file containing below text
    transportFile=XI2_0_SAP_APPL_4.6C_48_02_classic.tpt
    transportFile=XI2_0_SAP_APPL_4.6C_48_02.tpt, still it did not recognize it.
    What I am missing?
    help.. please..
    Dhandu

    Hi Dhandu,
    Check if the metadata properties file contains the below entries: Most importantly the first one. (all are case-sensitive):
    systemtype=<b>IBC 3.0</b>
    sourcesystem=<host>_<sid>_00
    transportFile=<tptfilename>.tpt
    contenttype=DirectoryView
    Also see that the properties file name is "<b>M</b>etadata.properties". It is case-sensitive, else it wont recognize.
    Also note: when you zip the tpt file & properties file, see that they are at the root directory of the zip file. Open and see if the directory path is not taken.
    regards,
    Pops V

  • Report Data Pane missing

    The Report Data pane is missing in VS version 9.0.30729.4462 QFE.  Does anyone know how to fix this?  I can't proceed to build a report without this vital step.
    Thanks in advance.

    Hi GtSmith555,
    Thanks for your question and Olaf’s reply. Based on my research, I found that your VS version 9.0.30729.4462 QFE may be correspond to the
    VS 2010. In this version, you can find the Report Data Pane by click “Data” in the Menu list, then click “Show Datasource”.
    Best Regards. Sharp Wang

  • Content in documentation pane missing from Help panel

    I am using Flash MX 2004 on my Mac OS X 10.4.5. The content
    in the documentation pane (right pane) in the Help panel is
    missing. Can somebody help me?

    You might have deleted the opera 6.0 directory in
    /Applications/Macromedia Flash MX, which it uses to display the
    xml-based help content.
    If you have a copy of Dreamweaver MX, then copy 'opera 6.0'
    from /Applications/Macromedia Dreamweaver MX 2004 to your Flash
    Directory. If that doesn't work you may be missing the content from
    /Users/Shared/Library/Application Support/Macromedia/Flash MX
    2004/en/Configuration/HelpPanel/
    and will have to re-install the stuff.

  • Mini bridge in ID CS 6 - control for size of thumbnail, bottom of pane, missing

    Mini bridge in ID CS 6 is of course essential.
    Suddenly, the little control at the bottom of the Mini bridge pane, for control of thumbnail size, is missing.  See screen shot of the control here, when we can get it by (laboriously) re-starting.
    As soon as we do anything with the Mini bridge pane, the control disappears.  Then we only see large-size thumbnails. (We are forced to go through a restart to get again, then it disappears again, then …)  Which makes it more than difficult to find what we need, among the many.
    We hope someone has previously solved this problem.  Or that Adobe support knows the problem, and resolution.
    Thanks in advance,  David Allen

    It is indeed possible.  From the Layer Flyout Menu:
    But thank you anyway...
    Joe

  • Oracle Designer Import - Missing Application Systems

    Hi,
    I'm tryiing to import an Oracle Designer data model into SQL Developer Data Model 3.0, which I downloaded today. I seem to have my connection to the Designer repository set up OK and I can select the non-versioned Workarea. When I click Next none of my application systems are displayed. The Oracle Designer build is 9.0.4.6.19 and the the DMBS is version 10.2.0.4. Any suggestions as to what I'm missing, greatly appreciated.
    Ian

    Phil,
    Any idea on liikely timeframe for a fix? Our situation is basically that we are worried about potential issues with Designer as we upgrade to Windows 7 and Oracle 11gr2 some time next year. Other parts of the company use PowerDesigner and that is one alternative; we're hoping Oracle Designer will continue to work but we want to be proactive and we'd also like to look at the SQL Developer Data Modeler 3.0 as another option. I can show people here some of the features, but a clean import of the Designer data would be a huge plus as we have 3,000 + database objects. If this is something that is slated to be corrected reasonable short-term, I'll just wait to give any demonstrations and push the product further until that functionality is available. Alternatively, if this is not available any time soon, I can try to demonstrate some of the functionality with a "build from scratch" modeling exercise.
    Thanks,
    Ian

  • Case design guidelines missing corners/radius dimensions

    Trying to design cases for iPhone 5 and 5c. Most dimensions are outlined clearly in Apple's case design guidelines. But the corner radiuses are conspicuously missing. Seems all the community advice I find is to measure it yourself... Being a risk averse perfectionist, I am looking for something more precise, if available. It must be out there, and think it could help quite a few with same dilemma. Anyone?

    Click on 'Nokia Support' at the bottom of this page..then again on 'Contact Us' under 'Support' ..and then select the 'Channel' you want ..
    Attachments:
    Nokia Support.png ‏117 KB
    Contact Us.png ‏85 KB

  • Account preference pane missing

    Running an iMac G5, OSX 10.4.6, 1GB RAM
    I recently purchased a refurbished iMac. During setup I choose the move files from another computer (iBook G3 running OSX 10.4.6). This worked fine, moving my applications, documents and user information. I ran updates to bring the sytem to what was on the iBook. This was two days ago.
    Now my Account preference pane is missing when you select System Preferences. I have no trouble logging in (was set on auto login), but I can't see the Account pane in System Preferences now to add another account.
    Is there a way to bring back the Account Prefernce Pane selection to the System Preferneces screen?

    Hi Doris, try this:
    Navigate to ~(yourhome)/library/caches/com.apple.preferencepanes.cache and delete that file.
    Then navigate to ~(yourhome)/library/preferences/com.apple.systempreferences.plist and delete that file.
    Now relaunch system preferences. Let us know.
    -mj
    [email protected]
    Message was edited by: macjack

  • Preview Pane missing

    Hi there.
    My MD is missing his preview pane.
    I have tried to double click at the bottom where it should be, but its not there.
    At the bottom, is just the end of mail, its hard to explain, but there is no bar to double click on to get the preview pane back up.
    Is there another way to do this?
    I have tried quitting mail, restarting, and re-sizing the mail window, but all to no avail.
    Anyone got any other suggestions?

    My Preview Pane suddenly went missing, too. One moment it was there, next moment I looked up and it was gone!
    The real PITA though is the total lack of reference in Mail Help, not only on how to open a Preview Pane, but not even acknowledging that such a thing exists. I've searched on everywhere key word I can think of and zip, nada, nowhere.
    If anybody knows how to open a preview pane in the Mail app, PLEASE post it here.
    Without a preview pane, it's virtually useless.
    This is my first real disappointment with MacBook. As a tech writer I find the MacBook Help documentation pretty pathetic.

  • Having some Space Designer panning issues.

    Hey all. I'm new to this board. I come with a bit of a problem. Hopefully, someone here can shed some light.
    In learning how to use Logic, I was told to maximize my CPU resources by setting up as few instances of Space Designer (among other things) as possible. I was instructed to link two Aux Channel Strips, insert Space Designer (SD) and assign a Stereo Bus as input, and then Send whichever instruments to that Stereo Bus. I've up a few of these, using a different preset in each, depending on my need.
    The problem is, when I send a mono instrument that is panned hard to one side, I get beautiful sounding reverberations, but the instrument heads more and more toward the center the more I Send to SD. Obviously, a little SD goes a long way, but there are instances where I would really like to control exactly how much gets panned left or right. I don't want all of my sound ending up in a murky, muddy soup in the center. Ideally I'd love for shared SD resource as I've described to be totally linked to the panning of the instrument. If panned hard left, then no SD at all on the right, and visa versa, and every step in between, all controlled by the panning
    What am I doing wrong?
    thnx, Rafiki

    Rafik! wrote:
    What am I doing wrong?
    Your conception about the system verbs routing is wrong.
    Let's have a look at the real world and haw the things are in the native acoustical surround. Imagine you are a listener sitting in the center of a big concert hall and the singer is singing from the left side of the stage. What you hear?
    1. You will hear/feel that the singing is coming from the left side - this is the DRY path of the sound source. It is the faster one and it is direct, that's why the human ear determines where the signal is coming from.
    2. There will be lots of WET signal reflections which go to different sides re-reflect ( depends on the hall architecture ) and as a whole they all will spread to the listener with a slight amount of latency.
    In the DAW you can use different methods to manipulate the reverbs but it will be more effective if you use them as inserts and control the spread and pan using a Dir.Mixer plugin after reverb insert for example. You can set even to mono just to get some deepness and prevent any mud in the soundscape.
    Finally you can add a bit little send of a system verb which give the listener a picture of some room ambience. You can also try to set the send to "Post-Pan"
    though its main purpose is for headphone/stage monitoring most and special plugins side chain like Waves C1s/ch for example. Using with system verbs may cause anomaly. Note, some hardware mixers have one Mono Send/Out and two Returns/Stereo for example.
    !http://img59.imageshack.us/img59/4967/aglogo45.gif!

  • Left pane missing

    My left pane is completely missing after a reinstallation of iLife '08 on 10.5.5. Please help!

    Give these basis procedures a try.
    Quit iPhoto and delete your iPhoto preferences. To do this, go to your username> library> preferences> com.apple.iphoto.plist. Delete this file. Then reopen iPhoto; it will create a new preference file with all of the default settings.
    If that doesn't work, do a verify and repair of permissions using Disk Utility.
    I hope this helps.

  • Design View Missing

    I'm learning Dreamweaver on my own and have been
    very successful in revamping my employers websites, BUT, I've been
    working on a page that took FOREVER to do and I think I must have
    hit a button or something that hid my design page work:
    All of my HTML Code is showing appropriatley, so I know I
    didn't loose any data, but the design veiw is only showing me my
    page header and thats it. I tried comparing that page settings to
    other working pages and I can't find anything wrong. Please Help!
    Text

    > how could one simple change effect the entire code in
    that way).
    We don't know that this is the case - the page may have
    carried most of
    those errors along for the ride.
    > Also, isn't the code referencing my hard-drive because
    of local files that
    > are
    > then uploaded to the remote server?
    Definitely not. It indicates an improperly defined local site
    root folder,
    most likely.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "JJ Joobler" <[email protected]> wrote in
    message
    news:ee74eq$sjf$[email protected]..
    > breget,
    >
    > Thank you for all of your help - Yet I do not understand
    how I could have
    > so
    > many errors when I've uploaded that page sucessfully
    numerous times
    > (basically,
    > how could one simple change effect the entire code in
    that way).
    >
    > Also, isn't the code referencing my hard-drive because
    of local files that
    > are
    > then uploaded to the remote server?
    >
    > Once again thank you for your help.
    >

Maybe you are looking for