Design Studio 1.3 Installation

Hi,
I installed DS 1.3 from Support packs. But while opening it I am getting below error msg. I am unable to open DS and create applications.Later I tried through Software Installation, but no luck...facing tha same error. Please suggest me here.
Regards,
Deepa.

This issue has been discussed in the thread here.. it should help. http://scn.sap.com/thread/3267738

Similar Messages

SDK extensions not available anymore after Design Studio re-installation

Hi all
I've faced some issues with my local installation and was wondering if it was due to the fact that my local installation was 1.2.1 while the platform was 1.2. So I've decided to uninstall 1.2.1 and install 1.2 again locally.
Once done, I don't see extensions anymore in the designer (Design Studio Utility Pack for instance) and if I try to install it again it says it's already installed...
Where can I go to delete these extensions completely and re-install them properly?
Thanks in advance
Best Regards

If all else fails, delete your 'Analysis Config' folder is the short answer.
You can also clean up old/invalid repo archives in debug mode but that's a longer answer.

Enterprise link design studio start up error.

Hi ,
I have installed BAM on XP and working on it.
When i try opening Enterprise link design studio i am getting TNS listener error.
A tns entry is there in the tnsnames.ora file.
I was using the studio previously and was working fine.
What is going wrong.
Regards
Ashwini

Hi
I have reinstalled Enterprise Link and now i am able to open design studio.
But BAM user was not created during the installation i created it manually.
I created a plan when i try updating the plan i am getting the following error
Unable to connect to ADC server "Main" as user: "NT AUTHORITY\SYSTEM":
Ticks must be between DateTime.MinValue.Ticks and DateTime.MaxValue.Ticks.
Parameter name: ticks
[ErrorSource="mscorlib"]
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0xB]
Error while beginning the execution for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "myBPELOrderBookingPlan" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
Regards
Ashwini

Performance problems on BI Platform after upgrading to Design Studio 1.3 SP01

Hi,
we upgraded our Design Studio Add-On from version 1.2 to 1.3 SP01 on our BI 4.1 Platform. (SP01 Patch 2)
After the installation we got performance issues in the BI Launch Pad when opening instances of WEBi reports for example.
Anyone with a problem like that ?
Tobias

Hi Denis,
for example we've got a WEBI report which is scheduled daily to the default enterprise location. We hold a history of 30 instances. If i try to open the latest instance or any other instance it took a long time to open. The only thing we changed was the installation of DS 1.3 SP01.
I did a few tests and it seems that if i opened the instance one time, it will be faster the second time, if i open it in the same browser session.
I now try to run the End to End trace to see where the time is beeing spent.
Did you hear something about any problems with the BI 4.1 Platform after installing DS 1.3 SP01 ?
Thanks for your help,
Tobias

Installing BO Explorer and Design Studio

Hello Experts,
I installed BI 4.1 SP2 Client tools on my laptop: BI 4.1 SP2, Crystal reports 2013, Dashboards SP2 and SAP Lumira and all are successfully installed.
I am trying to install BO Explorer but asking me CMS port number and Administrator Password, just want to confirm if the BO Explorer needs to be installed on BO Server? since we want the tool to be used by our super users to develop and i assume it can be installed on developer laptops.
Also, I am trying to install Design Studio 1.2( downloaded all 4 parts) after running the file for design studio 1.2_1 its looking for design studio 1.3 instead of design studio 1.2_2, could you please confirm design studio installation also if it goes as part of client tools?
Thanks for the help.
Kris

Hi Kris,
You will be able to access Explorer with URL http://<server name>:8080/explorer The Explorer web app will be deployed on Tomcat post install.
The Design Studio 1.3 is also available to download and I think it has a separate server and client installer. It could be a case that Design Studio 1.3 is compatible with BI 4.1. So I would suggest to try installing Design Studio 1.3
Regards,
Hrishikesh

Requirements to use SAP BO Design Studio 1.2

Hello,
What are the hardware and software requirements for create and publish application by SAP BO design studio 1.2 with BI4.1 platform?
I have installed the BO Design studio client 1.2 and I am able to create the reports, but I am not able to publish the reports or add these reports to the BI Launch pad so that the end users can access it.
Here are the details
- BusinessObjects Version (SP Level): 4.1 SP2
- Deployment (Standalone/Clustered): Standalone
- Server OS (SP Level): Windows 2012
- CMS Database: SQL 2008
- Application Server (IIS/Tomcat/Others): Tomcat
- Authentication type: AD
Thanks in advance.
Regards.
Mahesh

Did you install the BIP Add on?
See How to Install BI Platform Add-on For Design Studio 1.1
BusinessObjects Design Studio 1.1 SP01 is now GA - Installation
You will need to download the 1.2 BIP add on to the BI platform

Unable to find com.businessobjects.mds.olap.protocol.ess_japi while exporting Design Studio SDK

Hello,
I am trying to export / package Design Studio SDK, i am able to test / run it successfilly in eclipse but, getting error "Unable to find: Installable Unit [ id=com.businessobjects.mds.olap.protocol.ess_japi version=14.0.0.201504131108 ]" while packaging design studio SDK. when i am exporting the project it is failing at 78% and getting the above error. PFA screen shoot for the same.
Detailed Error:
C:\Users\Saurav\workspace\SDK_Packaging\package.SDK_Packaging.group.group.group.xml:88: The following error occurred while executing this line:
C:\Users\Saurav\workspace\SDK_Packaging\package.SDK_Packaging.group.group.group.xml:2369: Unable to find: Installable Unit [ id=com.businessobjects.mds.olap.protocol.ess_japi version=14.0.0.201504131108 ]
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:551)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:444)
at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:105)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.GeneratedMethodAccessor200.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:392)
at org.apache.tools.ant.Target.performTasks(Target.java:413)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.eclipse.ant.internal.core.ant.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.eclipse.ant.internal.core.ant.InternalAntRunner.run(InternalAntRunner.java:672)
at org.eclipse.ant.internal.core.ant.InternalAntRunner.run(InternalAntRunner.java:498)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.ant.core.AntRunner.run(AntRunner.java:378)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.runScript(FeatureExportOperation.java:422)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.doExport(FeatureExportOperation.java:285)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.doExport(FeatureExportOperation.java:223)
at org.eclipse.pde.internal.core.exports.FeatureExportOperation.run(FeatureExportOperation.java:107)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:53)
Caused by: C:\Users\Saurav\workspace\SDK_Packaging\package.SDK_Packaging.group.group.group.xml:2369: Unable to find: Installable Unit [ id=com.businessobjects.mds.olap.protocol.ess_japi version=14.0.0.201504131108 ]
at org.eclipse.equinox.p2.internal.repository.tools.tasks.AbstractRepositoryTask.prepareIUs(AbstractRepositoryTask.java:186)
at org.eclipse.equinox.p2.internal.repository.tools.tasks.MirrorTask.execute(MirrorTask.java:60)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.GeneratedMethodAccessor200.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:392)
at org.apache.tools.ant.Target.performTasks(Target.java:413)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
at org.eclipse.ant.internal.core.ant.EclipseSingleCheckExecutor.executeTargets(EclipseSingleCheckExecutor.java:30)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:442)
... 26 more
Thanks

Hello All,
Thanks for giving time for this thread. I have solved this issue. Actually when we create Feature Project by default all Pugins and Fregemets will be added to featured project(i guess in some eclipse version since SAP has not mentained any Note for this), we need to delete unnecessary plugins from the featured project. Just select all and right click and delete. Then again add SAP Sample SDK.
Even thought it will packaged properly and will create zip file and you will be able import it to the Design Studio but you cann't select and install it to the Plateform from Design Studio, make sure for this you have Unchecked Ckeckbox: Unpack the plug-in archive after the installation.
I think this will help.
Thanks

Design studio plugins where to get

Hello Guys,
I am looking for design studio plugins, for OSM 7.
do anybody know how to get it?
Thanks,
Mohammed.

Hello,
As I post at my previous reply the issue with the plugins has been solved using a workaround (or simple way) by linking the plugins and features folder for osm using links folder inside eclipse installation folder.
however, I am facing lots of troubles to get OSM configured properly.
I think all my troubles are configuration and security issues as the admin user for osm not able to log in to the administration tools :S
Brian, if you are up to help here i will be happy to share with you what I am facing but with this blog the communication is too slow, isn't it? :)
Best regards,
Mohammed

Install extension to Design studio

Hi
I would like to know the install extension to design studio link under the design studio- Tools, when I select its popping up with choose installation source
Location:HTTP://
What is this Location? What we have to give here and why?
Please help me out.
Regards,
Ramesh

Hi Ramesh,
add the below link to install sdk.
http://www.mikehowles.com/designstudioutilitypack1.3
Kind Regards
MAD

Design Studio 1.3 Collecting Garbage Problem

We have recently downloaded Design Studio 1.3 after uninstalling previous version and restarted. We continue to get a message box from Design Studio
Problem Occurred
'Collecting garbage' has encountered a problem.
And an internal error occurred during: "Collecting garbage".
After this happens, the studio is unresponsive and we close and restart and it occurs again shortly afterward. At this point, we cannot use design studio to create applications. Windows 7, java version 1.7_045....
Appreciate any ideas. Search of SCN and OSS has not brought up any results
Thanks
Lee Lewis

Hi Lee,
have a look at 1773751 - Design Studio - Support Note for Client
If during startup a popup with "Failed to create Java Virtual
Machine" comes up, your VM might have run out of memory. Try to reduce
the memory settings step by step. Change the parameter -Xmx in the file
SapDesignStudio.ini in the Design Studio installation directory, e.g. from
"-Xmx1024m" to "-Xmx768m". Then restart Design Studio. This value had to be
increased with 1.2 SP 1 from 512 to 1024 (Xms from 128 to 256, MaxPermSize from
384 to 512). Consider switching to a 64 Bit OS in case of unsufficient memory.
If the Designer shows an "Collecting Garbage" error
message, then a reduction of the two memory values mentioned above can also
help.
Perhaps it helps...
Regards,
Christoph

Unable to execute existing Design Studio applications from BI Launchpad after updating to 1.4!

Hello Experts,
We upgraded our SAP BO from 4.0 to SAP BO 4.1 SP5 and also updated our Design Studio from 1.2 directly to 1.4.
Upon testing the existing application in Design Studio it so happens that the existing application is sucessfully executed in local mode. However it does run from the BI Launchpad.
I tried creating a new application in Design Studio 1.4 whick works fine in both local and BI launchpad but my previous created application in 1.2 (now loaded in Design Studio 1.4) should also work, I don't know the reason why it dosen't work.Need help on how to proceed further.
Attached is the error which I get when ezecuting application in BI Launchpad.
Reply Awaited.
Best Regards,
Niyati S.

Hi Tammy,
Sorry none of the mentioned steps get synced with my situation since I have no problem executing new applications from BI Launchpad but only my old ones.
I read the article http://scn.sap.com/community/businessobjects-design-studio/blog/2014/11/26/ds-14-server-installation and it mentions just smooth execution of existing Design Studio application after updating to 1.4. Wish that would have been the case with me too!
Looking forward to finding solution of the problem.
Regards,
Niyati S.

Unable to open Design Studio Application in BI Launchpad after installing a plugin

Hi,
I have developed one Design Studio Application and deployed the same in the BO Dev launchpad. At that time the application was running fine.
After that I have developed one plugin extension and installed it in Design Studio Client in the local desktop, then I have installed the same plugin in BI Platform too as shown below:
After the installation of this plugin, whenever I try to open the Application in BI Launchpad I am getting an error screen as shown below:
BI Platform is SAP BO 4.0.
Please help me to solve this issue ASAP, as I have to submit this to the user for testing.
Regards,
Arun Krishnan.G

Hi,
this exception is a server side exception. This means, the content is in the server logs. Please follow the support note for BIP which you can take from Design Studio 1.2 Release Information -> Design Studio - Support Note for BIP Add-On and you can attach the last exception callstack (you should be able to find this log ID).
the first step would be to get the server run again - you can try to "uninstall" the extension, doe this help (always APS restart is requried).
having the exception we can see what is wrong. Definitely something on the extension installation - is this plugin created by your own - any specialities there?
Regards, Karol

We are a small design studio how do we install lion on all machines

We are a small design studio with 8 imacs. How do we install Lion on all 8. Do we have to download the installer 8 times! at 4gb a download that is a lot of bandwidth. Or can one person sign in to the App store and download then distribute to all 8 machines?
Any advice greatly appreciated.

You might want to peruse the licensing agreement for Lion, available here:
http://www.apple.com/legal/sla/
I have absolutely no experience with commercial or volume licensing; but, as a business, you might want to pay special attention to para. 2B and C. The terms are not the same as they are for a single user.

Error Design studio 1.3

Hi,
I had BI 4.1 SP2 Patch04 with Design Studio 1.2 Add on server. I have downloaded 1.3 SP1 client and server from "support packages and patches"
Everything installed with no error message.
When I open design studio client 1.3 Sp1 I receive below warning. I have attached
I have checked PAM .. we are having 32 bit java and IE 9. If I click ok, I am able to use the tool.
Thanks,
Ashi

below is the screenshot of server's add/remove programs however it shows both server and client components are installed.
The version number shows a bit different.
the installer name DSBIPADDON01_0-20011629 used for server Add on and DS_CLIENT01_0-20011685 is used for client install.
-Ashi

Error while Updating Enterprise Link Plan in Design Studio

Hi, All
I am getting one Error while Creating Enterprise Link Plan in Design Studio of BAM and Failed to Create the Plan.
i.e.(IMessageSourceReceiver>messageReceive:javax.NameNotFoundException: java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab not found)
Setup:
Integration between Oracle EBS 11.5.10 and Oracle BAM 10.1.3.
I am trying to get the Raw Data and sending over to the Enterprise Link Plan.
1. Created bam_ttq AQ and bam_ttq_tab.
2. Configured all of the startup parameters required for Enterprise Message Source Type (Oracle (AS JMS and OJMS)) in the Administrator of BAM.
3. Configured the Oracle (AS JMS and OJMS) with the following values in the Enterprise Message Sources in the Architect of BAM.
Initial Context Factory : com.evermind.server.rmi.RMIInitialContextFactory.
JNDI Service Provider URL : opmn:ormi://inaportal.inatech.com:6004:home.
TopicConnectionFactory Name : java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab.
Topic Name : java:comp/resource/BAMTTT/Topics/bam_ttq.
JMS Message Type : Text Message.
Durable Subscriber Name (Optional) : Bamclient.
Message Selector (Optional) :
Client ID (Optional) : ClientId.
4. Also configured the data-sources.xml and applications.xml in OC4J (10.1.2) to reference the database schema where the BAM_TTQ queue is created.
5. Modified the jndi.properties file with required properties.
java.naming.security.principal = ias_admin
java.naming.security.credentials = inaportal321
java.naming.provider.url = opmn:ormi://inaportal.inatech.com:6004:home
java.naming.factory.initial = com.evermind.server.rmi.RMIInitialContextFactory
6. In the Design Studio I have a Plan with Oracle BAM Enterprise Message Receiver and Grid.
And when I am updating the plan I am getting the following error.
IMessageSourceReceiver->messageReceive: javax.naming.NameNotFoundException: java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab not found
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:164)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "EBS_Example" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
Can anybody pls help me out with this? Its Urgent for Me
Thx
Renuka.
Message was edited by:
Renuka

hi renuka..were u able to resolve this issue with the naming exception....cheers...

Design Studio 1.3 Installation

Similar Messages

Maybe you are looking for