Design Studio connect the filter of two datasources

Hello,
I have two datasource DS1 shows the balance sheet and the DS2 shows the chart of balance sheet.
Now, I want to connect the two Datasources. For Example I click on "Aktiva" I want see the "AKTIVA" Chart,only.
I tryed with the follow script, but it doesn't work:

Hello,
thanks for your response. I have test your code. The crosstab is datasource 1 and the chart is datasource 3.
Now, I implement the code:
But it doesn't work.
Thanks for help...

Similar Messages

Design studio connectivity with HCP

Hello, I am able to connect Lumira to HCP.
Wanted to check if we are able to connect Design Studio to Hana Cloud Platform at this time?
Cheers!

My only experience with this is on AWS - and looking at the PAM https://service.sap.com/~sapidb/012002523100018972812014E I would lean towards AWS; this is what we used during the OpenSAP course with SAP's Jim Rapp
Looking at this thread here HCP is possible with Design Studio but the poster gave up: Connect SAP Design Studio with HANA Cloud Platform | SCN

HANA Stored Procedure in SAP Design Studio

hi there,
I developed a HANA stored procedure, I want to implement this procedure in SAP Design Studio. following scenario:
if Button Click, the Procedure is executed and the result of this Procedure is shown in a crosstab.
I can maybe help someone, maybe someone has tried something similar.
Thank you

hi,
I developed in Hana a calculation view with script, cfr stored procedure, this view I can use as a datasource in my SAP Design Studio. The loading of your datasource can be triggered by your button: set datasours load in script true, radiobutton event: DS_1.loaddatasource ();
Is this work around okay for you.
Greetings
Koen

Cannot log in the BAM Enterprise Link Design Studio

Hi, all,
I installed a BAM 10.1.3.3 in Windows 2003 SP1 server. And I cannot log in the BAM Enterprise Link Design Studio with the following errors:
[SERVERERROR] Error from Server: ORA-00942: table or view does not exit
Information from server:
942
0
oraclebam
[Oracle BAM Enterprise Link error code: SA -- 0x1, RW -- 0x5]
Unable to locate the repository.
[Oracle BAM Enterprise Link error code: RP -- 0x11, RP -- 0x102]
Unable to connect to the Repository.
[Oracle BAM Enterprise Link error code: IS -- 0x7, IS -- 0x19]
Thanks in advance for your ideas and suggestions.
Best Regards,
Bill

Self Answer: reinstall the BAM, and only check the repository install, don't move the data service and it works.

To connect the Current User Filter with the Excel Web Access

Hello,
I have uploaded an excel sheet which has data in Pivot table format into SharePoint site and then by using the current user filter I am trying to connect the filter (sharepoint profile user property) to a parameter in the excel sheet. I have defined one
of the pivot filter as the parameter. But all this, raises an error as below
"Unable to set one or more parameters. An error occurred while attempting to set one or more parameters in this workbook. As a result, none of the parameters has been set. Click OK to return to the workbook."
please assist.
Thanks & Regards
Thank You

I had referred this link but the example provided is related linking dashboard filters with the pivot table filter and i require to connect a current user filter.
The current user filter does not have any properties similar to what the dashboard filter have and we are not looking at using dashboard for our requirement.
Thank You
Thank You

Design Studio and DSL Bridge for BW (Sizing)

Hi,
I'm doing a sizing exercise on a system where we are only going to use Design Studio, Analysis for Office and their mobile counterpart.
Now, the "Resource Usage Estimator" does not provide options for these two tools, and as far as I can read they don't have that much usage on the server side.
My question is then - does Design Studio use the DSL bridge to connect to BW? Or is it like Analysis, where it connects directly and only gets the login and partial metadata from the SBOP Platform?
And is there any special elements I need to take into account when sizing this machine other then whats written in the sizing guides?
Best regards,
Kris

Thanks Tammy, this solved some of my questions.
I am still uncertain as to how I can estimate the system usage, when the users only use Design Studio and Analysis, which I cannot add into the sizing estimator.
Looking at the sizing guides for DS, Analysis and mobile, I still need to estimate the basic platform.
Do you know where I can find help with that?
Best regards,
Kris

Combine Analysis with Design Studio

Greetings,
I know it's possible to export an Analsys Application from Analysis for OLAP. You can then open it in Design Studio to edit it.
However, is it possible to "embed" an analysis in Design Studio?
We would like to be able to swap the axis, drilldown, change the members, etc. and combine it with Design Studio layouts.
If not, is there anything on the roadmap? This is preventing us to move from Bex WAD 3.x...

Hi Nadim,
with Design Studio and the scripting you are able to add so much functionality within your dashboards that I don't see that big gap between these two applications.
For exampe: You can add a filter panel where you are not only able to set filter but additionaly chose which measures should be displayed and whether they will be added as columm or row.
So it is possible within Design Studio to swap axis, change the members and do (little) drilldown.
But for drilldown-functionality you will have to use scripting and it is indeed still not as good as in Analysis. So one of my wishes for a future release is to enhance the drilldown-functionality (without much scripting or using multiple data sources) like in Analysis.
But you are right, DS is a tool to consume the data, many of these functionalities to analyse data have to be scripted which is some effort for each dashboard and every used query.
Some more integrated analysis functionality would be great.
(Maybe a better solution than to "embed" an anaylisis?)
Nevertheless I would like to see some export/switch function to open a query in Analysis (for Office), too. You are able to integrate links to an external URL so why Design Studio is not able to add a link to the Analyis-Application?
I know that some customers want to see their data in Excel, they would really appreciate the possibility to press a button to jump directly to Analysis for further survey of their data.
Regards
Steffen

Design Studio on HANA - HCP or AWS?

Hello community,
Has anyone had experience with hosting Design Studio on an XS engine in HCP?
We are looking to host Design studio on HANA but are not sure which solution to pick to host it.
This is our scenario:
Data source: XML files through an external webservice, weekly upload, less that 1GB of data
ETL Tool: Data services
DB: HANA
Reporting tool: Design Studio on HANA
Display: External website connecting to Design Studio Dashboard and displaying it within an iframe.
The solution will be public facing and therefore needs to be in a productive environment.
From what I have read, it seems possible on AWS. However I am not sure if it is possible with HCP.
Any experience on that?
Thanks

My only experience with this is on AWS - and looking at the PAM https://service.sap.com/~sapidb/012002523100018972812014E I would lean towards AWS; this is what we used during the OpenSAP course with SAP's Jim Rapp
Looking at this thread here HCP is possible with Design Studio but the poster gave up: Connect SAP Design Studio with HANA Cloud Platform | SCN

Connecting the T410s to an external monitor

1) Excuse the ignorant question but how would you connect the T410s to an external monitor? The T410s has a DisplayPort port, but what if the monitor does not have a DisplayPort port but an HDMI port?
2) Which leads into my second question. How would I connect the T410s to two external monitors? I guess whatever the answer is to the above question, but connect some kind of a splitter coming out of the T410s DisplayPort port?
3) And lastly, take a look at this link...
http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:category.details?current-catalog-id=12F0696583E04D86B9B79B0FEC01C087&current-category-id=19C791A03AF24034A0011B825513BCED&tabname=Gallery
Once you get there, click on T400s below the thumbnails. If that long link I pasted does not work right, it is the T-series gallery on Lenovo's site. In one of the pictures, it shows the T400s connected to two external monitors, but does not say how. They brag at how you can export 2560x1600 to two monitors without the use of a dock. Is this possible even though the T410s video card tops out at 1440x900?
Thank you.
~Paul
Lenovo ThinkPad T410s - 2901CTO
IBM ThinkPad T41p - 2373GGU
Solved!
Go to Solution.

Thank you, lead_org. You've been very helpful. Last 2 questions hopefully.
1) Regarding the use of DisplayPort on the Mini Dock Plus, since DisplayPort transmits audio as well as video (unlike the old style VGA which only sent video), if I connected the Mini Dock Plus to the HDMI port of my monitor (using a DP-to-HDMI adapter of course) would I lose audio out coming out of the green miniplug port on the mini dock, since the system might assume I want all audio to go through the DisplayPort cable? I have seperate external speakers I want to use and not the ones on the monitor.
2) Do you lose any quality when you connect to an external monitor using a Mini Dock, as opposed to connecting directly from the T410s itself? The reason I'm asking is that some people claimed that using the green miniplug audio port on the dock generates a much lower volume than if they were to plug the speakers directly into the laptop instead.
~Paul
Lenovo ThinkPad T410s - 2901CTO
IBM ThinkPad T41p - 2373GGU

Conversion to Design Studio templates

Hi experts,
We are in the pre-study phase for the conversion of all 3.x BEx web templates (serveral hundreds of them) to either 7.x or BO e.g. Design Studio. Right now we are a bit concern regarding the gaps between 3.x and Design Studio at the moment, especially the RRI, bookmarking, personalization, broadcasting and so on. The question are:
If we choose to convert the 3.x templates to Design studio now, do we need to redo all the Design Studio templates again when these features are available at a later time? Or can the upcoming features be easily incorporated in the existing templates, for example, just mark the context menu options for RRI or personalization etc, just like the WAD does for all the underlying BEx queries?
Design Studio can access data from universe, from HANA and BEx query. Is it possible (maybe in the near future) to be able to change data source on which the query is based on just like the feature in WEBI? If so, the Design Studio templates are reusable, that is, no need to recreate templates again in the future in case there will be some major underlying data flows rebuilds from BW to HANA.
Thanks.

Zabrina:
I don't think we have enough details from SAP yet to answer your conversion questions
Per the latest roadmap this is not in the next release:
https://websmp110.sap-ag.de/~sapidb/011000358700000390622012D.pdf
I recommend creating ideas for this on Idea Place on conversions
SAP BusinessObjects Design Studio: Home

Can't display Design Studio in IE but can in Chrome

Ok this is going to be REALLY weird, so bear with me. We have 3 environments for BOBJ; Dev, Qual & Prod. We are noticing very odd things with regards to displaying Design Studio reports in the various environments depending on what Browser is being used. See below for what happens.
Dev: Report can be displayed in both IE and Chrome
Prod: Report can be displayed in Chrome, IE returns a cannot display the webpage message
Note I am viewing the same Design Studio report in each environment, so same one in Dev for IE and Chrome, and another one in Prod for IE and Chrome. Why would Design Studio prevent the report from being viewed in IE but run fine in Chrome, and more importantly (and oddly) why is this environment dependent? This is all on the same machine also. See picture below for the message I am getting on IE in Prod. IE version is 10.0.9200.16843.

Ok so I fixed this, I had to go into my IE Settings and go to Advanced and click the Reset Internet Explorer Settings button. This fixed the issue, but not sure why it happened to begin with and why it was environment dependent. Another co-worker just had the same issue and had to do the same thing. This issue seems pretty...prevalent given that we only have a handful of people viewing these reports and already half of them have had the issue. :-/
With regards to Dev vs Prod, Dev is not load balanced/clustered while Prod is. I disabled friendly HTTP errors in IE and got the same issue.

Design Studio - Dashboards/webi Mobile compatibilty

Dear friends,
I have got a requirement of deploying few webi reports and Dashboards in mobile devices which could be of IOS/Android/Windows. I got to know about design studio where in we can develop the dashboards and reports and deploy it to any mobile devices(Tablets/Phones). Can you please let me know about the feasibilty of this design studio in accordance with my requirement.
Ver - BO 4.1
Thanks,
Gaurav

Hi GK,
Creating the dashboard which is mobile compatible is very much possible without using design studio. But if your looking for the futuristic then the answer is may be. SAP says that "Design Studio is the future of dashboarding for SAP". Please find the below links to get some fair idea on this.
BI 2014 Design Studio and Dashboards - Looking to the Future
http://events.asug.com/2013AC/Business%20Intelligence/0302%20SAP%20BusinessObjects%20Design%20Studio%20and%20Dashboards%…
Comparison Between Business Object Design Studio & Dashboard Design(Xcelsius)
SAP BusinessObjects Design Studio User guide.
http://help.sap.com/businessobject/product_guides/AAD11/en/ds11SP02_user_en.pdf
Comparison between the design studio & Dashboards.
SAP Design Studio (ZEN) vs. SAP Dashboards (Xcelsius) &#8211; Possibilities for an effective (and mobile) HCM Report…
Hope this Helps a lot!!!
--SumanT

I want to load from two datasources to ODS then ODS to infocube

Hi Experts,
I want to load the data from Two datasources to one ODS.
Once i completed ODS loading i need to load to infocube.
Please anybody tell me what're the steps to complete this task.
Regards
Suresh

Hi,
Once you are done creating the ODSs and InfoCube, create an update rule by right clicking the ODS -> create update rule and there you give your InfoSource1 name and create routines if necessary, likewise you would do the same for your InfoSource2 and load the data...
After successful load from two sources do the samething in Cube, right click on the cube and create update rule but this time you have to mention ODS name instead of InfoSource name. create the routines if necessary then save & activate.
then come out of the cube then go to ODS generate datasource and once it is done again right click on the ODS -> update ods data into targets -> Full / Initial -> InfoPackage will pop up and you are good to go with your load.
Hope that helps!!
~ Vaishnav

Odata services in Design studio 1.2 ?

Hello All,
I am exploring Design studio at the moment and I know that we can do scripting along with drag and drop functionalities.
But I would like to know if it also possible to consume Odata services or send Odata requests to HANA database to get data back and display on charts or tables and so on.
Any help would be appreciated.
Thanks

Hi Sangamesh,
Based on what you've described, I'd say it's most likely you will need to create a Calculation View. For more general information about using HANA with Design Studio you may find the following posts useful:
Using Design Studio with SAP HANA end to end-Part 1
Using Design Studio with SAP HANA end to end-Part 2
Regards,
Mustafa.

Design Studio 1.2 SDK - How can standard UI5 themes be loaded for custom components?

The SAPUI5 library that is embedded in the Design Studio framework includes standard themes such as the Blue Crystal theme. When developing UI5-based SDK components with DS 1.2 SP00, I was able to successfully load the built-in Blue Crystal theme by simply including the following statement in the component.js file:
sap.ui.getCore().applyTheme("sap_bluecrystal");
However, as of DS 1.2 SP01 this approach no longer seems to work. I don't receive any error messages either. The theme simply doesn't load like it used to or sometimes might just load partially.
The only difference I can see between SP00 and SP01 in terms of the UI5 framework is that it has been upgraded from version 1.12.7 to 1.14.6 but this shouldn't impact the validity of the above statement.
I'd appreciate it if anyone has any ideas about why the applyTheme() method no longer works and how this issue might be fixed.
Of course there is the workaround of manually including the theme files with a <cssInclude> tag in the contribution.xml file but this seems like a waste of resources given that technically, the theme is already included in the Design Studio framework.

The SAPUI5 library that is embedded in the Design Studio framework includes standard themes such as the Blue Crystal theme. When developing UI5-based SDK components with DS 1.2 SP00, I was able to successfully load the built-in Blue Crystal theme by simply including the following statement in the component.js file:
sap.ui.getCore().applyTheme("sap_bluecrystal");
However, as of DS 1.2 SP01 this approach no longer seems to work. I don't receive any error messages either. The theme simply doesn't load like it used to or sometimes might just load partially.
The only difference I can see between SP00 and SP01 in terms of the UI5 framework is that it has been upgraded from version 1.12.7 to 1.14.6 but this shouldn't impact the validity of the above statement.
I'd appreciate it if anyone has any ideas about why the applyTheme() method no longer works and how this issue might be fixed.
Of course there is the workaround of manually including the theme files with a <cssInclude> tag in the contribution.xml file but this seems like a waste of resources given that technically, the theme is already included in the Design Studio framework.

Design Studio connect the filter of two datasources

Similar Messages

Maybe you are looking for