Design the New process set up for Materials in one physical stock plant

Hi Experts,
The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical warehouses in the system without having thru really physically separate the warehouses into two different ones. Materials physically will be only for one warehouse.
Requirement is for Design the New process set up for Materials in one physical stock serving plant into two different system plants.
Most of the things are pointing in the direction that order Backlogs will not be converted into new organization. We have backlogs for the material requirements for purchase orders, sales orders whatever we have in the current setup; then there will have all are new orders from the certain dates taking in the  new organization set up. These backlogs are very long at least three to four years.
We would like to find some way to have the all the material requirements ending up in one basket instead of two baskets. That still be able to deliver at least in system point of view from two different baskets.
We need to do analysis on one physical stock serving plant into two different system plants that could be done either by material master data or as i understood that could be from PS side.
can any one please tell me how we can maintian this setup in the system.
Please provide your valuable inputs.
Brgds,
RK

RK,
Sorry, the creation of such an end-to-end solution is outside the scope of an online forum.  Most consulting companies would send a multi-disciplinary team to perform this task, and would take several weeks to research your requirements, and come up with a prototype.
Sales order availability checking is described in SAP online help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744b51546011d1a7020000e829fd11/frameset.htm
I will say this.  If your goal is to have two plants, with two company codes, and you wish to only procure or produce in one of the plants, then generally I would recommend using Special Procurement via Stock Transport Order (in standard SAP, Special Procurement 40).  This based on a very small knowledge of your requirements.  I have already cited the Sap online help for special procurement.
SAP online help for Warehouse management is at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
As you begin to read the required topics, I am certain you will realize that this task is beyond the capability of an untrained person.  I again suggest that you search for professional consulting services to assist you in this project.  It will be money well spent.
I am now closing my responses to this thread.  Good luck in your project!
Best Regards,
DB49

Similar Messages

  • Design the New process set up for Materials in one physical stock serving p

    Hi Experts,
    The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical warehouses in the system without having thru really physically separate the warehouses into two different ones. Materials physically will be only for one warehouse.
    Most of the things are pointing in the direction that order Backlogs will not be converted into new organization. We have backlogs for the material requirements for purchase orders, sales orders whatever we have in the current setup; then there will have all are new orders from the certain dates taking in the  new organization set up. These backlogs are very long at least three to four years.
    We would like to find some way to have the all the material requirements ending up in one basket instead of two baskets. That still be able to deliver at least in system point of view from two different baskets.
    We need to do analysis on one physical stock serving plant into two different system plants that could be done either by material master data or as i understood that could be from PS side.
    can any one please tell me how we can maintian this setup in the system.
    Please provide your valuable inputs.
    Brgds,
    RK
    Note : Duplicate post locked this thread
    Edited by: Jeyakanthan A on Jun 3, 2011 2:29 PM

    RK,
    Sorry, the creation of such an end-to-end solution is outside the scope of an online forum.  Most consulting companies would send a multi-disciplinary team to perform this task, and would take several weeks to research your requirements, and come up with a prototype.
    Sales order availability checking is described in SAP online help
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744b51546011d1a7020000e829fd11/frameset.htm
    I will say this.  If your goal is to have two plants, with two company codes, and you wish to only procure or produce in one of the plants, then generally I would recommend using Special Procurement via Stock Transport Order (in standard SAP, Special Procurement 40).  This based on a very small knowledge of your requirements.  I have already cited the Sap online help for special procurement.
    SAP online help for Warehouse management is at
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
    As you begin to read the required topics, I am certain you will realize that this task is beyond the capability of an untrained person.  I again suggest that you search for professional consulting services to assist you in this project.  It will be money well spent.
    I am now closing my responses to this thread.  Good luck in your project!
    Best Regards,
    DB49

  • TS3212 I need to download the new version of Itunes for my current account, not set up a new account but can not figure out how to do it.

    I am trying to download the new version of iTunes for my existing account, not set up a new iTunes account.  How do I do this?

    The requirement shoul be on the box the iphone came in.  they are also on the website
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.itunes.com/download)"

  • How do I get my NYTimes app off the new "Newsstand" and back into the folder I set up for all my news apps?

    I finally uploaded the now operating system 5.0 and set up iCloud. It rearranged all my apps on my iPhone, and took my NYTimes app out of the folder I set up for all my news apps and now I can't get it out. Nor can I move my other news apps onto the newsstand. Any ideas?

    You can't (at the moment).  Have been playing around with the same problem for about an hour - very irritating!!!
    If enough of us complain, (to the NYTimes) they might have it switched back, but I doubt it.  From the marketing point of view I would imagine they want "Newstand" to be THE subscription center, which does make sense.

  • Each new process at 100% for a few secs/mins

    Hello folks,
    I'm using my Mac Mini for almost a year now. A few months back, I started to have a little issue.
    Each time I'm launching a new program it's running at 100% CPU for a while... and then runs just fine.
    If I close the window (but still in the dock, with white dot under it), when I relaunch it, there is no problem.
    I also noticed that it's getting worst with time.
    Let me explain.
    When the computer has just booted, the problem is almost unnoticeable.
    When it's booted for 2/3hrs each new process is 100% for like 30secs.
    When it's booted for 5/6hrs, they are at 100% for around a minute or a minute and a half.
    When it's booted for a whole day, they are at 100% for around two minutes and a half, and so on...
    As far as I can remember, the problem existed a little while before I formatted last time.
    Do any of you know where it can come from?
    THX!

    Welcome to Apple Discussions:
    Which programs/processes are you referring to? New/starting processes obviously take more CPU than do running processes, since more events occur at startup than once the program is running.
    If you are watching the activity monitor, you might see how much RAM is being used. You may have some apps with memory leaks or other problems.
    Typically an app that starts uses up to 10%, perhaps more, for a few seconds.
    You need to be specific as to what programs are using resources the way you describe.
    For example, I just started iTunes, a real CPU hog and it took around 18% CPU for about 15 seconds before settling down to 0.1%. This is perfectly normal. On slower systems it might take longer to settle down and might use more resources before doing so.
    You might check your update frequency - mine is set to 5 seconds.
    Message was edited by: nerowolfe

  • I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

    I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

    That's not the correct port. It should be 993 for incoming.
    If you signed into iCloud from the System Preferences, it should automatically create the iCloud account for you in Mail. Sounds like it is an account you already had set up for MMe in Mail.
    Open Mail preferences, open the Accounts tab, disable that account in the advanced pane.
    Open Sys Prefs, open the iCloud tab, and sign out of iCloud. Then sign back in and see if a new iCloud account is automatically created.

  • How to do in-place-upgrades with the new patch sets (11.2.0.2.0)?

    Hello,
    Oracle has released the new patch set 11.2.0.2.0 for Oracle Database whose installation deviates from the previous patch set instructions. Are there any new deployment procedures available to do an in-place upgrade? We have a lot (about 100) of development databases here, most of them do not have enough hard disk space to do an out-of-place upgrade, so the need for updated deployment procedures is definetely there.
    Best regards,
    Andreas

    Hello Hemss,
    I am trying to do an in-place-upgrade (replacing the old Oracle software completely because our test servers have only very little space). When you want to perform an out-of-place upgrade, things are more simple, but you need the disk space for a new Oracle home (about 6 GB on Linux-x64 in my case). Essentially, the steps are:
    1. You can keep the production database online during the next steps
    2. Install the new 11.2.0.2.0 into a new Oracle Home (an Oracle software directory which does not exist yet). Only install the software.
    3. Apply any post-11.2.0.2.0 patches if available and needed
    4. Schedule a maintenance window with your users
    5. Put the original database(s) in MOUNT mode (SHUTDOWN IMMEDIATE followed by STARTUP MOUNT)
    6. Perform a FULL backup of both database and old Oracle home, just to be on the safe side.
    7. Set your enviromnent: ORACLE_HOME and ORACLE_BASE should point to your NEW installation, ORACLE_SID to your production database.
    8. Start netca to create a new LISTENER for your new software installation (you might want to use a different port than your previous installation in case you need to run both at the same time)
    9. Start dbua from the new Oracle Home and follow the on-screen instructions. You can either create an updated copy of the database (needs more disk space but you can easily switch back to your orginal DB), or you change the database to fit your new Oracle version (needs less space, but you need to run the scripts to downgrade to the old release if you need to go back)
    So, as long as you have plenty of disk space, things are not that difficult at all. Of course, you should always read the release notes and the full installation guides for the new version because there might be new features or behaviours that affect your database. It is also highly advisable to test this on a completely different machine first.
    You can find the complete upgrade guide here: http://download.oracle.com/docs/cd/E11882_01/server.112/e17222/toc.htm
    Best regards,
    Andreas

  • Did Lego Design The New Interface?

    Lego no doubt designed the new interface for iOS7. Even has the same plastic feel.

    Hello msharkey,
    You can also check out our sharing and ideas page at http://forums.verizon.com/t5/Share-Your-Ideas-with-Verizon/idb-p/ideas
    Thanks,
    Shamika_VZ
    Verizon Support
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • The usual - Where is the new 10.5.8 for My Settings

    The usual … Where is the new 10.5.8 for My Settings

    Would it be possible to post a notice in this forum that a new OS version profile setting is available when the settings have been updated? This might help reduce the speculation but primarily it would serve as a reminder for users about keeping their profiles updated....

  • Can we design the BPEL process using API's instead of JDeveloper

    hi' All,
    I might be sounding funnny, however I would like to know "Can we design the BPEL process in 11G from scratch using API's instead of JDeveloper"
    and is there some tutorial which talks about how to do this.
    thanks
    Yatan

    Hi,
    Designing a BPEL process without JDev will not be a good way to go, but you can deploy the process without JDev and also can change the dynamic parameters while deployment. For that you, need a separate ANT script. For Prod Env this is a very common thing.
    ~
    Joy

  • Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

    Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

    D.p.middleton the Adobe Application Manager has been available for quite some time.  It not only allows Creative Cloud users to install their applications but also downloads and applies applicable updates.  In addition it is also responsible for the licensing and managing your agreement to the terms and conditions of the EULA.
    2. this could be due to you selecting a trial subscription to the Creative Cloud?  If you go to one of the Adobe Creative products and select Help>Updates it will launch the update portion of the Adobe Application Manager which I believe is the portion you are looking for?
    #3 I believe this was already mostly covered in the answer to #2.
    #4 the Adobe Application Manager also receives periodic updates which affects both perpetual and Creative Cloud subscription users.
    I hope this provides you many of the answers you are looking for?  If not please feel free to respond back with any additional inquiries which you have.  Also if you are experiencing any difficulties with the update process please post this as well.  It may not be necessary to have a full understanding of the inner workings of the Adobe Application Manager to help you resolve your difficulties.

  • Doubts with the new process-controlled worflow

    Hi everyone,
    We are working with a new implementation of SRM 7 in classic scenario. We have a pair of doubt about the new process-controlled workflow. Can you help us?
    Our doubts are:
    1) In SC there are a new button called "inquire", this is used to return the SC to the creator in order to change the SC. Can we uses this same button in central contracts?
    2) In the documentation we read, we can configure when a notification can be sent. For example, can we configure than only when a SC or contract is rejected the system sends a notification to the creator of the document? Is this notification is a e-mail? If the WF has n-steps approvers and we configurate that SRM sends the notification to the approver, does it mean that this notification is sent to all the approvers?
    3) When a SC is released, can it be modified?
    We need your help.
    BR,
    Iván
    Edited by: Ivan Moreno on Jan 25, 2011 10:28 AM

    1) In SC there are a new button called "inquire", this is used to return the SC to the creator in order to change the SC. Can we uses this same button in central contracts?
    "Inquire" button will be only avaliable if you have configured approval with completion in the process level.. you can configure this for contract as well
    2) In the documentation we read, we can configure when a notification can be sent. For example, can we configure than only when a SC or contract is rejected the system sends a notification to the creator of the document? Is this notification is a e-mail? If the WF has n-steps approvers and we configurate that SRM sends the notification to the approver, does it mean that this notification is sent to all the approvers?
    when a SC or contract is rejected the system sends a notification to the creator of the document? Yes.. system will send an email notification
    Is this notification is a e-mail?  Yes
    If the WF has n-steps approvers and we configurate that SRM sends the notification to the approver, does it mean that this notification is sent to all the approvers? Yes
    3) When a SC is released, can it be modified? SC can't be modified once its Approved..
    Saravanan

  • TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.

    'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.  I have even done a repair to see if that works and it has not.  Has anyone else found a new way to get it working?

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

    what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
    I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
    How much trade-in value can I get from VZW or BestBuy or Amazon?
    Thanks!

    http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
    DROID Bionic:  (9/8 launch) – You already know everything about this device, don’t you?
    Samsung Stratosphere:  (9/8 launch) – 4G LTE device running Android 2.3
    HTC Vigor:  (10/6 launch) – Will replace the HTC Thunderbolt
    LG Revolution 2:  (10/20 launch) – Will replace the original Revolution
    Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
    Samsung Illusion:  (9/29 launch) – 3G smartphone running Android 2.3
    Samsung Plato:  (January launch) – whatever it is, it was pushed to 2012
    HTC Bliss:  (9/29 launch) – Lower end Android 2.3 device; the chick phone?
    Motorola XOOM 4G LTE:  (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

  • When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

    When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Maybe you are looking for