Design Time for Processes and Forms

Hi experts,
When trying to open "Design Time for Processes and Forms" in order to create a process, I get a dump.
Could you let me know what could be wrong ? config? etc..
Hereunder is a sample of what I found in T.code ST22
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
    referenced node must exist
      READ TABLE object_hierarchy_nodes TRANSPORTING NO FIELDS
                 WITH KEY node_id = object_hierarchy_node_wa-ref_node_id
>>>      ASSERT sy-subrc = 0.
    ENDIF.
provider has to be specified (except in case of recursion)
    IF object_hierarchy_node_wa-ref_node_id IS INITIAL.
      ASSERT object_hierarchy_node_wa-provider_id IS NOT INITIAL.
    ENDIF.
Thanks in advance,
Louis

note: Note 1075650
Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
regards,
Prakesh.

Similar Messages

Create Adobe Form using Design Time for Processes and Forms

Hi all,
I am trying to create a form that have 3 fields:
1. pernr
2. ename
3. effective_date
I done all the necessary setup of BADI ,class, interface and form.
I need the step to step guide where you create the adobe form using the Design Time for Processes and Forms. Anyone have any idea?
Edited by: Siong Chao on Jan 3, 2011 4:54 AM
Edited by: Siong Chao on Jan 3, 2011 5:00 AM

Hi,
I couldn't get to your query..
What do you mean by step by step procedure for a design time & process for forms.
if you are a beginner and looking for basic examples to implement adobe forms there are lot of them in SDN, please search them.
let me know if your query was a very specific one.
Cheers,
Sai

Entering custom backend service in Design Time for Processes and Forms

Hi all,
I am trying to create a form that have 3 fields:
1. pernr
2. ename
3. effective_date
I done all the necessary setup of BADI ,class, interface and form.
However I cannot seem to insert my custom backend service in the Design Time for Processes and Forms workbench (t-code:hrasr_dt).
Currently, I am just using SAP_PA for my backend service which is unable to load the ename into my form. The code in my custom class will not be triggered if I did not use my custom back end service in the Design Time for Processes and Forms.
Whenever I tried using my custom back end service, I will encounter the assertion_failed dump.
Anyone have any idea?
Edited by: Siong Chao on Dec 22, 2010 6:35 AM

Hi Siong Chao,
The filter name you have used in the BADI for your generic service requires to be defined in the Create / Edit Generic Service - Definition.( You can see this on selecting the Back-end services node under Form Scenario definition while using HRASR_DT transaction code)
Once you do that, you can import the fields defined in the Generic service BADI - using the same procedure used in standard SAP backend sevices.
Hope this clarifies. Please let me know if you have any further questions.
Best Regards
G Raj

Design Time for processes and forms : Short Dump

Hi All,
When I try to execute Design Time for processes and forms - (tcode :HRASR_DT), I am getting below short dump.
The following syntax error occurred in program
"CL_HRASR00_DT_FSCN_PD_DATA====CP " in include
"CL_HRASR00_DT_FSCN_PD_DATA====CM00E " in
line 177:
"The obligatory parameter "FORM_SCENARIO_VERSION" had no value assigned"
" to it."
Please suggest what could resolve this.
Thanks.
Tejas

note: Note 1075650
Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
regards,
Prakesh.

Assertion_Failed dump when accessing Design Time for Processes & Forms EP3

After exhausting SAP note searches and the SDN community forums, blogs & wiki searches, I decide to make my first SDN post:
After installing Enhancement Pack 3 to the base ECC 6.0, we got the Design Time for Processes & Forms node in the IMG under HR Administrative Services. I was able to get in to it the very first time without any issues; however once I selected one of the sample SAP processes, I received an "Assertion_Failed" dump in the section of code saying a referenced node must exist. In debugging, we did see a node that is referencing a node that does not exist, which is causing the dump. The dump occurs in CL_HRASR00_DT_OBJECT_BROWSER, Method ASSERT_OBJ_HIER_IS_CONSISTENT (line 71).
I now get this dump each time I try to execute the Design Time for Processes & Forms node in the IMG. Note: when accessing process the old way, there is no issue.
To me is seems like either EP3 was not installed completely, something went wrong in the activation of those business functions, or the copy of the sample forms from client 000 did not grab everything. In debugging, it appears that the missing reference node is related to some form scenario node. Also note that all the steps under Technical Settings were completed.
Has anyone seen this issue before?
Thanks for any help you can give. If I find the solution, I will post the answer here as well.
-Jeff Glynn
Edited by: Jeffrey Glynn on Oct 22, 2008 1:54 AM

Hi Jeff,
I believe we had the same issue here.
There is an SAP Note (below) for this. Please let me know if this works.
Note 1075650 - New Design Time tool Corrections for the dump
Note Language: English Version: 1 Validity: Valid from 18.07.2007
Summary
Symptom
Dump on executing the transaction HRASR_DT which starts the new design time
tool of the HR Administrative services
More Terms
Design time tool HRASR_DT HRadmin
Cause and Prerequisites
Solution
The solution to the dump occuring would be resolved by applying the SP
Alternately the dump can be
resolved by performing the following steps manually :
1.Start SE16 transaction
2.Give the table name as T5ASRDTOBJHIER and press RETURN key
3.Execute the Selection screen by pressing on F8 Key
4.Select the following entries:
i. OBJECT TYPE = PROCESS and NODE TYPE = PROC_REF_FSCN_DIRECT
ii.OBJECT TYPE = PROCESS and NODE TYPE = PROC_REF_FSCN_DIRECT_START
5. Click on EDIT entries button on the header
6. Enter in the field REF_OBJECT_TYPE the value as FORM_SCENARIO
7. Click on the Next button on the header bar to navigate to the next entry
8. Repeat Step 6 for this entry also
9. Save the modification
Additionaly, perform the following steps as well:
1.Start SE16 transaction
2.Give the table name as T5ASRDTTOOLS and press RETURN key
3.Execute the Selection screen by pressing on F8 Key
4.Click on CREATE entry button on the header
5.Enter the following to create a new entry:
TOOL TYPE = FSCN_MSG_MAPPER
OPERATION = DISPEDIT
TOOL CLASSNAME = CL_HRASR00_DT_FST_MESSAGE_MAP
6. Enter the following to create a new entry:
TOOL TYPE = PROC_EXEC_FREQUENCY
OPERATION = DISPEDIT
TOOL CLASSNAME = CL_HRASR00_DT_PRT_EXEC_FREQ
7. Save the new entries
These adjustments should resolve the dumps hindering to start the new
design time tool

Dump while Executing Hrast_dT (Design time of HCM Process and Forms)

Hi All,
I am getting Syntax Error Dump while Executing Hrast_dT tcode (Design time of HCM Process and Forms) and here with i have mentioned the source code also ist contained in standard class.
*METHOD constructor.
DATA:
    badi_context          TYPE REF TO lcl_badi_context.
CALL METHOD super->constructor
    EXPORTING
      form_scenario         = form_scenario
      form_scenario_service = form_scenario_service.
DATA:
    t5asrfscnsrv_wa TYPE t5asrfscnsrv.
SELECT SINGLE * FROM t5asrfscnsrv INTO t5asrfscnsrv_wa WHERE form_scen_srv EQ form_scenari
ASSERT sy-subrc EQ 0.
ASSERT t5asrfscnsrv_wa-service_type = 'GENSRV'.
fill_table_metadata( ).*
i followed this link also..its not working for me..
[Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3]
Regards,
Parthi

Hello Parthasarathi,
Please, try to implement the note 1075650.

Query on HCM Processes and Forms

Hi
I am facing some issues in configuring Hiring Forms in HCM Processes and Forms. I can place them in 2 baskets and describe each of them below. I would appreciate any advise on ways and means to overcome these errors.
Basket #1
I want to use the standard forms SHU1, SHU2 in development environment to understand the HCM P&F functionalities. I copied these form scenarios from client 000 and did all the configurations as outline in IMG activity HRAdministrative Services >> Configuration of Forms and Processes >> Sample Processes for HCM Process and Forms.
When I run a check using HR Administrative Services >> Configuration of Forms and Processes >> Configuration of Forms >> Check Consistency of Form Scenarios and select Form name, I get errors along following lines:
u2022     Error Message Sample#1 Form scen SHU1 vers. 00000 serv. SAP_PA: Only one deflt value allowed for field I0009_ZLSCH
u2022     Error Message Sample#2 Form scen. SHU1 vers. 00000 service SAP_PA: Field I0007_ARBST default value is not created
u2022     Error Message Sample#3 ISR scenario SHU1 version 00000: Field I0001_BUKRS is missing
u2022     Error Message Sample#4 Form scen. SHU1 vers. 00000: Field I0007_ARBST service for default values not required
However, at the bottom of the log I see this message in Green: Form scenario SHU1 version 00000: Form scenario is consistent
I tried to make the changes as suggested in the Long Text for each of these messages. Probably due to the fact that I am using standard delivered forms, I get this message u201CDo not make any changes (SAP entry)u201D and I am unable to save the changes.
Basket #2
In this basket I have Org_Change form and have managed to go the whole nine yards and complete the configuration in ECC. The consistency checks for process and forms are in green. However, I am unable to start the process through Portal. I get this message u201Cno data availableu201D when I try to select a process.
Among the 5 roles delivered in SAP as initiators for processors u2013I am interested in 3 of them HRASARA (for HR Administrator). I have configured HRASRA and HRASRB as initiators for Org_Change. However, I am not able to figure out how to link these roles to portal roles such as SAP_ASR_ADMINISTRATOR, SAP_ASR_MANAGER etc.
I would appreciate any advise on ways and means to overcome these errors.
Thanks
Subhash

Have you been able to fix your issue in Basket # 2 ?

Dynamic Parallel Approval for HCM Process and Forms

Hi everyone,
I have a scenario where I need to use the "Dynamic Parallel Approval" (or to keep it simple, initially I tried using the "Parallel Approval" wizard)for a workflow used in the HCM Process and Forms.
The standard task for approval in process and forms is TS17900101. I have mentioned a multiline container in the Miscellaneous tab of this task. However,I was unable to use this task in the wizard. There are no results attahced to this task unlike any other standard approval task (like TS30200147). I need to use the task TS17900101 in the workflow assigned to process and forms, but not sure how to handle this scenario (parallel approval).
If this is not the right way of doing it, Is there any workaround for "Parallel Approval" in HCM Process and Forms.
Could anybody throw some light around this area.
Thanks for your help.
- MM

Thanks Anuj. But I believe, the container element that I add in the miscellaneous tab does not necessarily have to be used in the agent assignment. The multiline container is just to instantiate the workitem 'n' number of times. Correct me if I am wrong.
My concern is that I was unable to use this approval task (TS17900101) in the workflow wizard for dynamic paralle/parallel approval.
Arghadip - Thanks for your suggestion. I have seen some your nice contributions in the WF forum.
I actually tried using the 'Blocks'. But this is what I ran into. When I send multiple approval requests (say 3), if one person has approved it and the second has rejected it,I need to take out the workitem from the third person's list (because it has been rejected by someone in the group). I am not sure if this is possible using Blocks. And in my case the third person is still having the workitem, but gets a dump/error when he tries to open it.
Also, if any one has rejected the request, I do not have to wait for the rest to take any action on the workitem and proceed further. But I guess in 'Blocks' it will not let you go out unless every workitem has been processed.
To summarize,here's what I need - I need to come out of the block for two conditions. One, if everyone has approved, comeout of the block with an apprval flag. Two, if anyone has rejected (even if some have not processed their workitem), delete the workitems from others inbox and come out of the block with a rejection flag.
So, any kind of input or suggestions on how this could be handled would be highly appreciated.
Thanks
MM

Default value in dropdown field for FPM form in HCM Processes and forms

Hi Experts,
I am developing HCM Processes and forms using FPM forms and I had a dropdown list contains ten values. So, every time while opening the form first time, my dropdown field should be defaulted with fifth value from the list. How can we achieve this in dropdown field related to FPM Form.
Please guide me.
Regards,
Nayani.

You would have to assign the default value to one your custom generic services.
Regards.
PS: There are posts which talk about generic services , make yourself comfortable with the concept of generic services.

How to create Digital Personnel Foile for HCM Processes and Forms

Hi I am creating HCM Processes and Forms using FPM Forms. Now to print these forms Alternate Adobe forms also developed. But once the entire process is completed by HR Admin and in future if they want to see the already processed form and if they want to take print out they should be able to do it. So, based on some knowledge I am assuming we can achieve this by Digital Personnel file creation. Can any one please confirm. Whether they can open already processed form and how to get print these forms as this is FPM form and no print option is available.
In order to configure DPF, can any one share step by step procedure to configure DPF. I dont have any idea on SAP Records Management as I felt this basic is required. Friends help me here.
Regards,
Nayani.

This seems possible.
Refer here ... Print Form (FPM Form Type Only) - HCM Processes and Forms - SAP Library
For DPF - ensure you have used the anchor correctly refer Save PDF file added to processes and forms WDA
Regarding the possibility of being able to print it from process browser - I am not sure.
Process browser for latest release is documented here...
http://help.sap.com/erp_hcm_ias_2013_02/helpdata/en/14/9a3516789f4aceb6bb910df1220869/content.htm?frameset=/en/43/1d639b3fce3566e10000000a11466f/frameset.htm
Regards.

License cost involved in HCM Process and Forms for Adobe Interactive Forms

Hello All,
We are planning to implement HRAS business package and use HCM Process and Forms.
There are lots of developments involved and before to start with, i would like to understand is their any license cost involved for using Adobe Interactive Forms and also if we are doing new enhancements to the forms.
Also send me some links about the license involvement if any ?
Thanks & Regards & Cheers
Vj

Check the following link:
ADS Licence for SAP ESS MSS
Regards

Design Process and Forms

Hi All
I am in system ECC6.0.I want to Design HCM Forms.When i look in IMG.
PM>HR Administrative Services>Configuration of FORMS Under this i dont see Design HCM Process and Forms button button.
How this button will be visiable.
Thanks,
Swapna

Hello Parthasarathi,
Please, try to implement the note 1075650.

WS17900260 - Task TS17900108 resulted in error, in HCM Processes and Forms

Hi,
I have designed a HCM process and workflow. In custom workflow ,WS17900260 (TS17900108) has been used to save data. In this step it is resulting in error and shows the below message in "Step History" tab. No message in Message Tab.
Work item 000000172044: Object CL_HRASR00_WF_COMPONENTS method SAVE_FORM_DATA_TO_DB cannot be exe
Message no. WL821
An exception with the type CX_HRASR00_PROCESS_MODE LLING occurred, but was neither handled locally.
I tried executing the associated method and I did not get any error. Please let me know if anyone has faced this issue and how it is resolved.
Thanks,
Sri

Hi Sri
Expecting a prompt answer in 2 hours time is a tad too demanding for all of us
We try to help you based on our experience and if we do not have it, we just wait for the right one to respond.
It is not that I have experience in HCM Processes and Forms, but a little bit of googling to help you gave me the following:
1) SAP Help for your task TS17900108 states that it has the same requirements for binding as that of task TS17900107 .... check the latter half of the page here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f28f8a1e5132c3e10000000a1553f6/content.htm
2) If you check TS17900107 binding requirements, it needs certain necessary parameters which may be causing the issue. Check the mandatory requirements here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f2cf2c249b3268e10000000a1553f6/content.htm
Also check for authorizations
3) See how another user solved the issue with the same method here:
http://scn.sap.com/thread/1753027
4) See the possible advice for a similar issue with task TS17900107 (which is kind of similar to your task)
Novice in HR forms and processes workflow - help in usage of TS17900110
I checked various threads and the common link is that it all depends on your system and the bindings or the custom functions called within. Also do check for authorizations as mentioned in the first link from Help.sap.com
I am sorry, I cannot give you further details because I myself do not have experience in HCM P&F. I am sure you too can google further from here, or we can be a little more patient for others to reply (I understand that some issues are critical and need immediate resolution, but we all are busy in our own projects and sometimes are not able to reply immediately).
Regards,
Modak

Creating a new position and updating IT 1028 using HCM processes and forms

I have to create a new position and update the related infotypes using the design time framework of HCM processes and forms. The problem I am facing is the info type 1028 is not a part of the de coupled infotype framework and does not appear in the service fields list. How can I update the infotype 1028? I was thinking of updating it using the FLUSH method of the class implementing the ADV services interface IF_HRASR00GEN_SERVICE_ADVANCED by calling the function module RH_INSERT_INFTY. But, how do I get the position ID created? Is there any other way of achieving this? Please help as soon as possible.

HI
Create one Function Module to return all the vacant positions and load that in a drop down.
For IT1028 you have to update via the RH_INSERT_INFTY.
Kind Regards,
Mukesh

HCM Process and Forms & Global employee management

Hi all,
I would to know if anyone of you experience in implementing HCM Process and forms for Global employee management(GEM).
I would like to know the difficulties or challeges .
How the forms will work.
Means if i have created a form using Personnel number without GEM.
Later if i Implement GEM.do i have to Change the form ?
Does P&F has any option choose the employee based on personnel id anywhere or we have to use personnel number and process as existing.
what could be stuctures for each infotype which are country specific .
Please share your experience on this.
Regards,
Nachy

Forms and processes are enabled for CE/GE.
what process you would lile to do ?
refer HR_PA_US_ADDL_CONTRACT sample process and note 1366872
1) The central person id of the existing (reference) pernr should be
   read with the help of a generic service and this should be made
   available for the SAP_PA service so that a new central person is not
   created. This should be set in the field CENTRAL_PERSON in the
   form scenario.
2) An explicit operation on IT0709 should not be defined in the
   infotypes and operations of the design time tool. This is
   automatically handled by the infotype framework through the data
   sharing mechanism (table T582G). Kindly ensure that IT0709 is
   enabled for data sharing and please remove it from the process.
3) The reference pernr data and the shared infotypes must be read with
   the generic service only (refer to note 1366782), these should not
   be read with the SAP_PA service as this may lead to a clash in the
   record keys and can lead to undesired results.

Design Time for Processes and Forms

Similar Messages

Maybe you are looking for