Design View doesn't work on fresh cs5 install

I just bought CS5 web premium and installed all of the programs. For some reason design view in Dreamweaver doesn't work for any of my sites. It's just a grey background. I can work in code view, but I can't do anything with the design view, it's just a grey dead pannel. I had installed the trial version last month and it worked perfectly which is why I bought the full version. I uninstalled the trial version of Dreamweaver CS5 and installed the new CS5 and now the design view is dead. I tried reinstalling CS5 again but Design View is still dead. Any ideas?
Thanks,
DC

Hi DC,
I read you post, and now I wondering If you could help me with my problem.
I also recently purchased CS5 web premium and are having problems with the Preview option.
If you are using a local server for testing purposes, could you please read my posts on this forum:
Have a problem with preview CS5
(it's posted just above your own post)
Many thanks in advance,
Lpre

Similar Messages

Dremweaver CS6. Design View is not working.

Hello.
Design View is not working.
I got this instead of normal View.
What wrong with it?
Regards,
Nata

Sometimes it is just a temporary problem and by shutting down the DW and rebooting the system resolves such problems. Otherwise, you can try to reset the preferences using the instructions given here:
<Restore preferences | Dreamweaver CS6, Dreamweaver CC>
Or even try deleting the cache file using these instructions:
<Deleting a corrupted cache file>
Good luck.

Cropping pictures with Viewer doesn't work.

Cropping pictures with Viewer doesn't work.
Selecting < or ~ 12 pictures. (picture size are Snapshots with iphone resolution) ->Viewers opens and display them. -> Russian roullette between cmd+k or the little crop button. No indication which one will process a crop or which not. -> Both result in picture selection disappear with no crop.
Selecting > 12 pictures. (picture size are Snapshots with iphone resolution) -> Viewer opens and display them. I crop them one by one with same Russian roulllette behavior between cmd+k or the little crop button. -> Closing Viewer. -> Pictures remain like they've been before. Not cropped.

I just tried what you described (although I can't really fathom why you would describe it as Russian roulette (with a variable number of L's). Unless you've been drinking a lot, which is what people are usually doing when they are playing Russian roulette. Your post was hard enough to decipher without that.
Anyway, my cropping was saved each time. I think there's something wrong with your Preview.app. Have you changed anything about the autosave functions of OSX?
I would try:
Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
if that doesn't help, then I'd reinstall Mavericks over your current installation.

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!!

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!! What will I do?

I have similar issues and was referred to a knowledge base article support.apple.com/kb/DL1572 This seems to corrected the issue.

I'm trying to install the iOS 7 but it doesn't work how can I install it?

I can't install my iOS 7 it doesn't work how can I install
It?

I suggest you scroll down and use the "Update your device using iTunes" method here:
http://support.apple.com/kb/HT4623

My 'Design View' has stopped working in CS5. How can I get it functioning again?

I've looked through the existing topics and couldn't find an answer.
I hadn't made anything in DreamweaverCS5 for a a few months, but when I went today to create a new HTML document, I couldn't do anything in 'Design View' . I have not changed anything with the program at all. I still checked Edit>Preferences>File Types/Editors and .html is not listed for 'Code View'. The 'Split' and 'Design View' buttons are clickable, but when I click in 'Design View' the Properties Inspector grays out. I also can't type anything into the field. There are two icons at the top, one for the meta tag and the other for the title tag in the 'Code View'.
I haven't the slightest idea as to why this is no longer working. This has never happened before. I did nothing but create a blank document. I'm on a PC. Any help with this would be extremely appreciated.

And just like that, I figured it out.
For some reason, the 'head content' had overtaken the 'Design View'. I clicked the down pointing arrow on the grayed out Properties Inspector just to try something else, and also to see what was hidden. When I did that, the top part of the 'Design View' peeked out a little from under the 'head content' area. I enlarged the 'Design View' field and realized what was going on. I still have no idea why that happened on it's own since I've never enlarged the view for 'head content' before. I actually usually don't have it enabled. I guess it's like a lot of people complain, Design View is quite buggy.

Design View Does Not Work

The design view of my DW CS3 version 9 on Mac OS X does not
function. Normally I wouldn't care, but this problem prevents me
from viewing/testing the design-time style sheets that I am
required to build for end-users. I have tried remedies cited in
various posts, but none help. I have tested the problem, by using
the exact same files (pages and design-time css) on an install of
MX2004 on another machine, and they all work fine from there. But I
really don't want to use that other machine, or MX2004 for
developing the design-time stylesheets. Please advise.

Post a link to a page that doesn't display for you on OSX,
please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"uknow-mav" <[email protected]> wrote in
message
news:g6tb9q$qi6$[email protected]..
> The design view of my DW CS3 version 9 on Mac OS X does
not function.
> Normally
> I wouldn't care, but this problem prevents me from
viewing/testing the
> design-time style sheets that I am required to build for
end-users. I have
> tried remedies cited in various posts, but none help. I
have tested the
> problem, by using the exact same files (pages and
design-time css) on an
> install of MX2004 on another machine, and they all work
fine from there.
> But I
> really don't want to use that other machine, or MX2004
for developing the
> design-time stylesheets. Please advise.
>

Just installed Firefox 5.0 and now my JS View doesn't work. Tried to re-install but no go. Any thoughts?

Windows XP. If it doesn't work is it possible that I can go back to Firefox 4?

Yes, that's it. I did try that before and then again after your response but still no luck. What I'm thinking is that the JS View 2.0.5 add on is not yet compatible with the new Firefox 5. If that's the case then I would hope that it will soon be compatible. The problem is that I actually use that every day and now I'm kinda stuck. Still open to any thoughts if you have any. I am willing to go back to Firefox 4 is that is still possible.

Export reports views doesn't work

export the report view's in a file doesn't work. The file is created but still empty. Workaround is to get the sql and execute it in worksheet edit and cut and past the result in a excel sheet. It woul be better if the export works fine.

This is working fine for me.
What version of SQL Developer are you using?
What OS are you on?
What report did you run?
What type of output did you select?
-- Sharon

Design View Doesn't Display Correctly

I am new to this forum so hope I do things correctly!
I have Vista and am using Dreamweaver 8 to produce 4 of my
websites, but I am having trouble on my www.victorian-cards.com
site. All the files where I have the problem validate without
errors and display correctly in both IE and FF. I have nine files
with this problem. One of the problem pages is
http://www.victorian-cards.com/funny-cards2.htm
When I look at these nine files in the Design View, all I can
see are the correct picture at the top, the top and bottom
navigation, Google Search, and the footer. Where the body is I see
horizontal lines and </td>. The </td> is highlighted in
yellow. I thought perhaps I had a coding error, but it validates
without any errors.
Help! I sure would appreciate some words of wisdom. I can
work in the code, but I like to check the design view before I
upload my files.
I have read that a lot of people are having this problem. I
did try changing the magnification, but this did not help.
Jeanne
Victorian Cards

> Thanks for the quick reply. I tried this, but nothing
changed. Any other
> ideas?
>
> Jeanne
the page has html syntax errors- having to do with tr and td
tags.
Look at the code view in dw- see the yellow highlights??
It's probably just one error, find that one out and most of
the others will
be gone. There's too much stuff on the page for me to
sight-read the code
and find the error.
suggestion? Make a copy of the page, then start deleting
content so the
problem syntax error is more obvious. Delete working complete
tables to
isolate the problem one
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Select in View doesn't works

Somebody knows why a fine select in sqlplus doesn't work when i create view based in fine select ?...
Thanks ...

I created view in this way:
CREATE OR REPLACE VIEW V_PRUEBA AS SELECT * FROM (V_CNB_acumpres RIGHT JOIN lin_accion ON V_CNB_acumpres.LINEA = lin_accion.codigo) RIGHT JOIN act_presupuestadas ON lin_accion.act_presup = act_presupuestadas.nir_actpresup
GROUP BY act_presupuestadas.act_presupuestada, act_presupuestadas.programa, act_presupuestadas.provincia
...And when in sql*plus executed it view, shut off...
But If I execute the SELECT directly in SQL*Plus whithout view it's wirk finely...
BUT I see that when I create view without GROUP BY clause, this work fine !!!
Have you got a idea about this ?...
Thanks...

Row Fetch on View doesn't work / Custom procedure needed???

Hello guys!
Again I have a problem. It seems like once I finish one problem I stumble into another one. :-(
Would is breaking my neck is the following problem.
I have a view based on a query that joins 3 tables including one via a database-link. I would like and need to use that view as the source for the automatic row fetch! However, when creating the automatic-fetch-row process, the items on my page do not get populated. However, If I change the cource for the fetch-row-process to a view made of only a single table it works like a charm. Could it be that the automatic fetch-row procedure doesn't work with joined views and db-links at all??? If so, could you please give me an example of a PL/SQL procedure that will populate items on page reload and load!
It's extremely urgent and I appreciate every input!
Thanks guys! I hope you some ideas and hints!
Regards,
Sebastian

Ah, ok - I probably read too much into your update (still thinking that it was related to the "view" issue in your first post :) ) - so an INSTEAD OF trigger won't be needed if this is just a single table!
There are a few ways that adding an extra column into a tabular form would stop it being updated. Typically, this could be if the new column forms part of the "Primary key" for the data. If this is the case, you need to ensure that the processes recognise this. It can also be that you have set the item to DISABLED or READONLY - these items are not submitted with the page, so even if you set the item's value somehow, that will never get back into the record (there are ways to take off the DISABLED or READONLY attributes immediately prior to the submit, if need be). That could also happen if you have set the item to be a Standard Report Column - this is just displayed text, so doesn't form part of the submitted data. You can get around that by having a hidden column with the actual data in there as well - if you have ever created a tabular form using the simple EMP table example, you'll see EMPNO and EMPNO_DISPLAY - both contain EMPNO but only the basic EMPNO hidden item is submitted. Another, perhaps rare, possibility is if you have used the APEX_ITEM package to create any of the output and have used an index number that has been automatically assigned to another column - for example, if you have APEX_ITEM.TEXT(1, ....), which gives each item a name value of "f01", then this is most likely going to double up with the index for the hidden primary key item (which is usually first in the list). If this is the case, just change the index of your APEX_ITEM item to some high number (anything up to 50).
Finally, you say "INV_PT_ID_SUB is also bound to an item PTIDS" - what is PTIDS? The MRU processes need to understand what column to update and relies on the settings for primary keys and the column names in the SQL query.
The MRU's only know about their own settings - the workspace, tablename and primary keys etc. They contain no details of individual columns as such, so adding in extra columns shouldn't be a problem. In fact, I've added/deleted so many columns from tabular forms, that I'd be really annoyed if I had to start from scratch every time!!
Andy

Demo servlet IsItWorking doesn't work after fresh install

Hello,
We did a fresh install of Oracle 9iAS 1.0.2.2 on Hp-ux 11i
The installation completed succesfully, but
when trying to run the demo servlet IsItWorking, we get error 'The page cannot
be displayed'
The apache error_log file contains following lines:
[Thu Apr 18 17:12:03 2002] [notice] FastCGI: process manager initialized (pid
9809)
[Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
9811 (group group1, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:03 2002] [emerg] OPM: Watcher starts with an id=9810
[Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
9812 (group group2, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:04 2002] [notice] Oracle HTTP Server Powered by Apache/1.3.19
(Unix) mod_fastcgi/2.2.10 mod_perl/1.25 mod_oprocmgr/1.0 configured -- resuming
normal operations
[Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9811) died,
restarting.
[Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
9819 (group group1, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9812) died,
restarting.
[Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
9820 (group group2, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9819) died,
restarting.
[Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
9821 (group group1, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9820) died,
restarting.
[Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
9822 (group group2, module JServ), and inserted in proctable as entry 0
[Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
[Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
[Thu Apr 18 17:12:24 2002] [warn] OPM: EW process rp5400:0 (pid:9821) died,
restarting.
[Thu Apr 18 17:12:24 2002] [warn] OPM: ADM: process 9810 created server process
9824 (group group1, module JServ), and inserted in proctable as entry 0
Any idea?
Thanks

Hi -
I was wondering if you solved this problem. I had the exact same issue on Win2K after I installed the Java Portlet Development Kit. Now my Apache JServ does not work.
This is a sample of my error_log:
[Fri Jun 07 10:48:01 2002] [notice] FastCGI: process manager initialized
[Fri Jun 07 10:48:08 2002] [error] OPM:Can not find one alive process
[Fri Jun 07 10:48:08 2002] [error] [client 127.0.0.1] File does not exist: /servlet/IsItWorking
[Fri Jun 07 10:51:22 2002] [warn] OPM: ADM: Process 380 terminated using SIGTERM successfully
I have re-checked my jserv.properties, jserv.conf, zone.properties several times and I can't see the problem. I tried to manually remove the entire PDK and go back to my original state (I saved a copy of all my config files) but it still doesn't work.
Did you find a way to fix this?
Thanks!!!
Heather

Mighty Mouse - scrolling to zoom view doesn't work in Photoshop CS, why?

I just got my new G5. Apple's new Mighty Mouse doesn't seem to work right with the main apps I use. You can't use the scroll wheel to zoom the view, in either Photoshop or Cinema4D (3d app). I tried turning off horizontal scrolling in hopes that it would fix the problem. Nope. No zoom. Can you remove the Might Mouse driver so it is just a two button/vertical scroll mouse?
Quad G5, 1.2ghzPowerlogic Quicksilver, 800iBook Mac OS X (10.4.3)
733Quicksilver, 800iBook Mac OS X (10.2.x)

Doh! I thought that was on by default. It still doesn't work in my 3d app though, but I found out that is a know issue and the latest update should fix it. Thanks for your help.

Design view doesn't show in Dreamweaver

What do I need to do to activate Design View in Dreamweaver. I get Split and Code, but not Design. Have examined every possible drop down menu and preference and find no way to activate this. Do I need to reload?

See Screenshot:
If you still can't see Design View, you must be working with Fluid Grid Layouts.
Open your Fluid Grid CSS file and add an X as shown below. This will trick DW into thinking it's a normal layout so you can use Design View.
    Dreamweaver Fluid Grid Properties
    dw-num-cols-mobile:     X 4;
    dw-num-cols-tablet:        8;
    dw-num-cols-desktop:    12;
    dw-gutter-percentage:    25;
=====================================
Nancy O.

Design View doesn't work on fresh cs5 install

Similar Messages

Maybe you are looking for