Design wirless lan

HI
PLZ Provide me a link related to: how to design wirless lan
10xs

Hi Alsayed,
I sent this to a fellow NetPro not too long ago, hopefully most of the links are still up (you never know around here :)
Here some good "getting started" Cisco docs (and link to a video) which might help. This is todays reading assignment :)
Wireless LAN Design Guide
http://www.cisco.com/web/about/ciscoitatwork/design_guides/dg-wlan.html
Wireless Site Survey FAQ
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_q_and_a_item09186a00805e9a96.shtml
Understanding the Lightweight Access Point Protocol (LWAPP)
http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/ns337/networking_solutions_white_paper0900aecd802c18ee.shtml
Deploying Cisco 440X Series Wireless LAN Controllers
http://www.cisco.com/en/US/products/ps6366/prod_technical_reference09186a00806cfa96.html
Cisco Wireless LAN Controller Configuration Guide, Release 4.0
http://www.cisco.com/en/US/products/ps6366/products_configuration_guide_book09186a00806b0077.html
WLC Video
http://www.cisco.com/en/US/products/ps6366/index.html
Lightweight Access Point FAQ
http://www.cisco.com/en/US/products/ps6306/products_qanda_item09186a00806a4da3.shtml
Lightweight AP (LAP) Registration to a Wireless LAN Controller (WLC)
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml
Here are some excellent overall scope ideas;
Deploying High Capacity Wireless LANs
http://www.cisco.com/en/US/products/ps6108/products_white_paper0900aecd8027a5f7.shtml
Cisco Deploys Wireless LAN Technology to Increase Productivity
http://www.cisco.com/web/about/ciscoitatwork/downloads/ciscoitatwork/pdf/Cisco_IT_Case_Study_WLAN_2004_print.pdf
Design Principles for Voice Over WLAN
http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/networking_solutions_white_paper0900aecd804f1a46.shtml
Evaluating Interference in Wireless LANs: Recommended Practice
http://www.cisco.com/application/pdf/en/us/guest/products/wireless/c2072/cdccont_0900aecd80554f8b.pdf
I have attached some good "getting started" type Security docs) and would suggest having a good read of them. You may also want to engage your Cisco partner and Cisco SE to help you plan and implement this most important function of Wireless.
Wireless LAN Security White Paper
http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/ns386/networking_solutions_white_paper09186a00800b469f.shtml
Five Steps to Securing Your Wireless LAN and Preventing Wireless Threats
http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/ns386/networking_solutions_white_paper0900aecd8042e23b.shtml
WLAN Security considerations (Part of WLAN SRND Guide)
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns178/c649/ccmigration_09186a00800d67eb.pdf
Wireless LAN Security Solution
http://www.cisco.com/en/US/netsol/ns339/ns395/ns176/ns178/netqa0900aecd801e3e59.html
Wireless - Compare Products and Solutions
http://www.cisco.com/en/US/products/hw/wireless/products_category_buyers_guide.html
**Don't forget to check out the good books available from Cisco Press (link on this site) Here are two of the better ones;
Wireless Networks First-Step
http://www.ciscopress.com/bookstore/product.asp?isbn=1587201119
802.11 Wireless LAN Fundamentals
http://www.ciscopress.com/bookstore/product.asp?isbn=1587050773
Hope this helps! And best of luck.
Rob

Similar Messages

  • WIRLESS LAN IS NOT WORKING IN IT.

    HI I AM USING WINDOWS 8 WIRLESS LAN(DRIVER) IS NOT WORKING(INSTALLING) IN IT CAN U PLEASE RESOLVE MY PROBLEM

    sunny_22j wrote:
    i have purchased iphone 5s from dudai and it doesnt have face time,
    And it never will. Phones sold in Dubai do not have facetime installed per government regulations.

  • Design Exercise - LAN Solution

    I have an opportunity to gain employment with a network consulting firm. Part of the process is to take some information that goes through a mock RFP and come up with a design. It is an excellent way for them to see what I have to offer given all the channels available in coming up with a design. I believe in the process of collaboratoin and was hoping I could engage some willing individuals to work with me in creating a design for a LAN Solution, Wireless Solution and WAN solutions. I have until next Wednesday to put something together for a presentation next Thursday. So if you like practicing your design skills and would like to work with me on this excercise, I would greatly appreciate it.
    The purpose of the excercise is not overerly technical in nature, but more high level. Here is the scenario:
    Overview
    The Widget International Group (WIG) is a prominent organization in the Upstate New York market. The WIG is looking to expand to a new regional office and build a new network. The network shall consist of high-availability, layer-3 routing, redundant, and fault-tolerant network equipment. Applications such as Voice over IP, Video over IP, WLAN, Voice over WLAN and possibly other leading edge applications may be utilized and, therefore, must be accounted for in this solution. The solution shall permit LAN segmentation via VLAN’s, and support VRF’s to avoid spanning tree issues. The solution shall support software modularity, to allow the switch software to be upgraded or downgraded with no service disruption, provide protected memory space for critical processes, and enable processes to be restarted independently of one another. Careful planning should be done to ensure that the WIG network has the flexibility to accommodate future applications. In addition to the solution parameters set forth in the following paragraphs, WIG would like the Contractor to review the overall functional requirements of the RFP and, coupled with the Contractor’s prior project experience, make recommendations on equipment and network configurations that may be overlooked in this document. All recommendations that are outside the requirements set forth herein, but may be of interest to WIG, shall be provided as an alternate solution and price. A separate Bid Form should be provided for each alternate solution and the Contractor shall state in their proposal which solution is most recommended for WIG and the reasons why.
    The Contractor will be responsible for providing a turnkey design and installation solution based upon the parameters described. The design effort required at a minimum will include, but not be limited to:
    Logical Network design presentation
    Physical Network design presentation identifying all components to be sourced by Contractor or furnished by owner.
    Description of diversity, redundancy and security aspects intrinsic to the design.
    Identification of any impact the new design will have on existing environment configurations (i.e. redefining IP schemes). If it is prudent for WIG to make adjustments to their IP Schemes in their existing environment, then they will require support for this also.
    Support for Open System Standards - The solution should be support open system industry standards, such as H.323, 802.1p and 802.1q, MGCP, SIP, TAPI, JTAPI, IPV4, IPV6, etc.
    System Administration - Maximum flexibility for rapid, efficient, and cost-effective configuration changes, affecting personnel and associated IP telephone equipment through a standard browser-based interface.
    LAN SOLUTION PARAMETERS
    The complete data network core shall consist of two (2) chassis-based switches with redundant power supplies, two (2) supervisor-engines/CPU modules per switch and the appropriate quantity of line cards to support 10GB fiber uplinks to the edge switches in four (4) IDF closets. Uplink quantities are outlined in table 1 below. Core switches shall connect redundantly between each other, to the WAN equipment, as well as the edge switches in the respective TC’s. All 10GB uplinks shall be non-blocking. Edge switches shall be located in the TC’s in sizes and quantities required to support the number of users in that particular area. WIG desires a stackable edge switch.
    There area total of 200 users.
    10 Servers with basic services such as email, HR applications - CRM, and Active directory.

    Hi Mheick,
    since this is part of a hiring process, I don't believe this is the proper forum to ask for assistance. The potential employer wants to know what you would do.
    Collaboration and team work are very important elements in the work environment but not for job placement. However,  researching on the web or this forum to find useful information is all you need to do to develop your own solution.
    And, if a company is expecting this as part of the hiring process, expect to be grilled over your RFP - if you can't validate your RFP and defend your choices .........
    Best of luck. Regards,
    Steve

  • Qosmio X - Can't download wirless LAN driver update

    I can't downloaded "wireless Lan driver", that update was sent by Tempro.
    Why? No problems with other updates.

    Hi Gil_1,
    The question is: Why you want to download and install this update?
    If everything runs properly, you can forget the update! :)

  • Windows 7 x64 802.11n Wirless LAN Card #2 Randomly stops working

    Hello, I've had a re-occurring issue with my network card over the past 2 weeks, it randomly started after I received a windows update. Often as I'm playing a game / surfing the web I will experience a moment where I lose all connectivity and my wireless
    connection is telling me it is "Limited connectivity". Although this happens if I go to my Device Manager and scan for available hardware changes to my network adapters, my Wireless LAN Card adapter disappears, after scanning a couple more times
    it will return and I will regain all of my connectivity and the issue will not happen again until I reboot my computer. 
    I'm not sure how I can fix this as I have opened my computer to check if the network card was loose, and everything seems like it should be working properly. It is also strange that it began occurring after an update.

    Download and install the latest Wireless LAN Card driver from the website of the manufacturer.
    S.Sengupta, Windows Entertainment and Connected Home MVP
    Turned out that the manufacturer switched websites which must have messed up something with the auto updating, thanks.

  • Wirless lan

    hey i have n91 
    on user guide it show that n91 is wirless$3g enabled but in acsses point it is not present what's this 
    Attachments:
    Nokia_N91_APAC_UG_en.pdf ‏2421 KB

    dhamot wrote:
    in access point only 3option r thr no wlan option
    it shows no active connection
    its v3.10.023
    19-03-07
    rm-158
    n91(19.01)
    updated software
    Your N91-5 is the Chinese variant. It uses the WAPI protocol whitch is different from the 802.11 WLAN standard.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Windows XP LAN driver needed for my Satellite A100-784

    I bought Satellite A100-784 with Windows Vista. I've removed Vista and installed Windows XP (taken from other non-Toshiba notebook)) and then SP2. Now I can't use the internet because there's no LAN driver. The drivers downloaded from this Toshiba site don't work.
    Any solution for me? I expect other problems to appear soon, with the sound and so on. Isn't there any pack of drivers for this model with WinXP?
    (I'd be very happy to get a quick restore disk with Windows XP in English but customer support won't provide any.)

    Hi
    Your A100 unit belongs to the PSAANE series.
    Toshiba European website provides two different XP Intel Lan driver versions:
    1. Intel LAN driver 8.0.43.0
    2. Intel LAN driver 9.2.24
    The first one 8.0.43.0 was designed for LAN Pro100 and the other 9.2.24 for LAN Pro1000
    Additionally I would recommend following the guidelines described in the installation instruction! The drivers must be installed in the right order.
    Please also take a look into another thread about the same theme:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24125

  • Printing through Wirless Network

    Dear All,
    i have the following problem ...
    we have printers on local network 192.168.100.XXX ....<-- DHCP is disables
    our Cisco Wirless LAN Controller is on different network 192.168.105.XXX .... <-- DHCP enabled
    the wirless device is connected to the local network switch 192.168.100.2 so its having the same gateway as the local network.
    How can I enable printing through wireless.
    awaiting your prompt feedback guys.

    i hope this is clear ...
    so can what configuration i have to enable any wirless user to print through local printers.
    Printer doesn't have wireless !!
    i am not trying to give you a hard time but i really need your help in this.

  • Satellite C55-A5105 Wi-Fi is painfully slow, wireless LAN driver won't install

    I've been bouncing around for solution on this issue of C55-A's and 8.1 having problems with slow Wi-Fi, and attempted to do the driver update. However, after downloading an extracting to it's own folder on my Desktop, I get to a point where it reads it cannot locate file C:\Users\<my username>\Desktop\<folder name>\Win8164\REALTEK Wirless LAN Driver.msi. If I retry, I get a 1706 error, no valid source could be found for product REALTEK Wireless LAN driver. I'm pretty certain I'm download the correct driver. I have run a check from Device Manager to see if the latest driver is installed, and I'm being told yes, so I can't figure out why speed is so slow still. This is my wife's laptop and it's barely used since we got in May, so we are a bit behind on Windows updates. Not sure that has anything to do with it. I've also disabled the Wireless card from being able to be powered down, another tip I found in this forum.

    Hi Peter.  I stumbled on this site and downloaded the driver they link to, followed their instructions, and see no improvement. I'm trying to break up the Windows Update downloads, and 84MB is a snail's pace. Do you have any info on what driver i should be updating exactly, and where that file may be?

  • LAN switched network

    anyone know what the average bandwidth for a company based on LAN games and Online games are?
    (it could be any game)
    what factors must take into account to design a LAN switched network based on hierarchical model?
    cheers

    Disclaimer
    The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.
    Liability Disclaimer
    In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.
    Posting
    Joseph, How can I minimun latency in LAN as well no packet loss? with protocols, switches,...How packet transmission latency is reduced when all of hosts are connected to access switches on 100Mbps? why not 10 or 1000Mbps?
    "... or gig." = 1000 Mbps
    Why not 10 Mbps?  Because transmission latency, for any size packets is reduced as bandwidth is increased.
    How no packet loss?  With sufficient bandwidth so there's little need to queue, and if you do need to queue (which again we want to avoid), sufferient buffering so packets aren't dropped.
    on the other hand, imagine for a LAN game you need 1Mbps bandwidth. There are 4 VLANs(12,24,36,48 users in each VLAN) and you must use hierarchical model( access,distribution and core layers) and just are allowed to use VLAN,Trunk,VTP,DTP and Rapids PVST+.How can I reache to this amount of bandwidth in LAN?
    Why must you use hierarchical model?  Modern data center designs, which are aimed at minimum latency, often no longer use the 3 layer design.
    If you have multiple VLANs, and we cannot route, hosts won't be able to contact hosts on other VLANs.
    Don't understand your last question.

  • Cisco 4402 Guest lan and product lan DHCP assignment

    I'm currently setting up a wirless lan with a Cisco 4402 Wireless Lan Controller and 1 cisco 1242AG Access points.
    All the devices include:
    Cisco catalyst 6505
    Cisco 4402
    D-Link broadband router
    Connection between them:
    6505 trunking with 4402 (dot1q and trunk vlan 1 and vlan 3, but i found that all vlan on the 6506 will trunk together), wlan 1 is production lan while vlan 3 is Guest lan)
    6505 vlan 3 is connecting to D-Link broadband router as a guest lan
    both vlan 1 and vlan 3 have DHCP server for production PC and guest notebook respectively.
    On 4402, i have two interfaces and 2 WLAN. one interface for production lan pointing DHCP server to product DHCP address and the other interface for guest lan, which pointing to guest lan DHCP server.
    when a notebook connec to guest lan, it will assign an address from guest DHCP server, while connecting to production lan, a production IP will be assigned last week. But the things change w/o changing the structure, when i connect to guest lan SSID, the ip suppose assign by the Guest lan DHCP, but it failed, the notebook got ip address from production lan.
    Is it trunking makes those all Vlan "mixed", and get ip from the DHCP server with faster respone time?
    How can i make sure when i connect to guest lan, the ip will be assigned from Guest Lan DHCP server and vice versa?
    Many thanks!

    Here is the URL for the Cisco Guest Access Using the Cisco Wireless LAN Controller which will help you :
    http://www.cisco.com/en/US/docs/wireless/technology/guest_access/technical/reference/4.0/GAccess.html

  • Catalyst 2960 for my LAN WS-c2960-48TC-S vs WS-c2960-48TC-L

    Hello
    I want buy a Catalyst 2960 but i don't now which is great for my situation.
    Model : WS-c2960-48TC-S (LAN Lite - 400 euro) vs WS-c2960-48TC-L (LAN Base - 900 euro) the difference of price is half.
    I need 3 VLAN (2 VLANs with data  and other VLAN (3th only voice).All security options want applied on ports.(MAC,ACCESS..etc)
    Between switch and router will be a TRUNK channel...
    The network design parts: lan printers  - 4, desktop - 16, phone IP - 10.
    I have only ISP .
    So..what i need?      LAN Lite or LAN Base
    Another question: In LAN Lite i have all commands?
    thank's

    Q. What are the advantages of Cisco Catalyst 2960 Series Switches with the LAN Base software relative to Cisco Catalyst 2960 Series Switches with the LAN Lite software?
    A. Cisco Catalyst 2960 LAN Base switches deliver intelligent services for branch offices and wiring closets. The LAN Base IOS software supports enhanced Layer 2+ security, quality of service (QoS), availability, and scalable management to enable new converged applications. Catalyst 2960 LAN Base switches include both 10/100 Fast Ethernet and 10/100/1000 Gigabit Ethernet connectivity in 8-, 24-, and 48-port configurations.
    Cisco Catalyst 2960 LAN Lite switches are for entry-level branch office and wiring closet networks. They simplify the migration from nonintelligent hubs and unmanaged switches to a fully scalable and reliable network. The LAN Lite IOS software supports standard Layer 2 security, QoS, and availability while lowering the network total cost of ownership. Catalyst 2960 LAN Lite switches deliver 10/100 Fast Ethernet connectivity in 24- and 48-port configurations.
    All Cisco Catalyst 2960 Series Switches have technical support service options available through Cisco SMARTNet ® service. All come with a Limited Lifetime Hardware Warranty, and LAN Base and LAN Lite software updates are provided at no additional cost.
    Information came from the below link:
    http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-series-switches/prod_qas0900aecd80322c37.html
    Will all commands be available? No...if they were then what would be the point of having different software levels? Will the switch meet all basic to intermediate needs? Yes. If you are looking for a set of specific commands to see if they are available then check out the command reference tools available from Cisco.
    http://www.cisco.com/c/en/us/support/switches/catalyst-2960-series-switches/products-command-reference-list.html

  • Which T1 Wireless router to choose??

    We just got a T1 line installed for a remote location...
    What would be a good wireless router to get. They are going to WEBVPN into our main building. But i need a wireless router to support T1 speeds, since we are paying for it...
    Any help would be appreciated!!

    Thanks for the rate.
    Both routers are ADSL+ capable.
    I've seen your post from previous NetPro topics. I am very curious to know how many branches and offices are you going to operate. Is your Head Office going to have Wireless too?
    If your office will have Wireless in plan, I would recommend that you consider a Wireless LAN Controller. You deploy your AP's to your branches/offices and configure them for Hybrid Remote End AP (H-REAP). It's a very cost effective solution.
    Introduction to Wirless LAN Controllers (Standalone):
    http://www.cisco.com/en/US/products/ps6302/Products_Sub_Category_Home.html
    H-Reap Design and Deployment Guide
    http://www.cisco.com/en/US/products/ps6087/products_tech_note09186a0080736123.shtml
    H-REAP Configuration Guide
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml
    Hope this helps your solution.

  • Universal application platform

    Here is an ordinary day in the IT department of a big company. Boss says: �Hey, Jack, we have a new application. Is written in PowerBuilder and is has to be installed on all our 300 workstations !�. �Great, says Jack. Another pain in the ass. Last month was a Java Swing application, three months ago was a Visual Basic� And I have to do all the work. Damn, I think I am gonna switch to a taxi driver job !�.
    Swell, isn�t it ? Well, there are a few techniques to improve the installation procedure of a classic two tier application, but why not solve the problem from it�s root ? �Hey, Jack, we have the solution !�, we say to poor Jack. �Ah, yes, I know, web applications of course. Workstations only have to have a browser. But man, they are so clumsy ! They are slow and not easy to develop. And it�s stupid to use internet technologies inside a LAN. And the users always complain about graphical interface. And you know how it is when end users complain about graphical interface !�, says Jack, showing his teeth.
    We smile condescendingly. We have a better solution.
    Why not have them all ? Why not combine the best parts from both worlds ? This is what we propose now: a Universal Applications Platform. It is a �thing� that will allow LAN applications to be installed on a sever and to be accessed from a sort of browser, just like web applications, but the speed will be just like in 2-tier applications. And they will be easy to develop, with a RAD IDE. And the beauty of the interface will make women cry.
    Now seriously. Here is the idea: in a web application, we have a data server which holds data, an application server which performs business computation and a web server which presents the data to its client � the web browser. This is good for an internet application, no doubt about it. But�
    There are not many organizations who run web applications, compared to those which have classic 2-tier applications running. The need for this kind of applications was and will continue to be HUGE !
         That is why we think it worth to develop a cool mechanism for LAN applications. It will be similar to normal browser-HTTP-web server mechanism, only the browser will be more cool, the protocol will be heavier (since data will not have to swim across the Internet ocean), faster and more powerful in order to achieve the performance of a 2-tier system. Instead of a web server there will be a �presentation server�, which will generate the �view� part (as in MVC pattern) and will deliver it to its cool browser.
    Now let�s put all the pieces together. We have:
    -     a data layer which, by the way, would be nice to be obiectual instead of relational;
    -     a business layer;
    -     a presentation layer: this would be one of the four parts of our cool mechanism;
    -     a connection & deliver manager � the second part of our cool mechanism;
    -     a cool protocol for local area network communication - the third part of our cool mechanism;
    -     a cool �browser� used to access the applications on the server: the final piece.
    The presentation layer: this layer will generate the visual format of the data to be displayed to the end user. This layer will have to overcome the limitations of the HTML/CSS/JavaScript/AJAX and to provide a native-like interface and joy of living to end-users.
    The connection & delivery manager: this will be something like a web server. It will manage connections and will deliver the requested content to each client.
    The protocol for local area network communication: this will not be stateless like HTTP, it will be specially designed for LAN communication, for easy development and also for the performance needed by enterprise class applications. The communication could also be done by messages like in the old PeopleSoft architecture.
    The �Browser�, or maybe is better to call it �executer�: this will be platform dependent. It will receive from the presentation layer a �description� of the page to be displayed and will build/render the page based on the underlying operating system capabilities. That description will contain both the structure of the page and the data.
    The four layers - data, business, presentation layers and the connection manager - may be part of the same server program if best performance is desired, or they can be different programs, as they are now in web applications. The business layer could be represented by a stored procedures engine inside the data server, or it can be a regular J2EE server. The cool browser can be a regular browser updated to support the new cool protocol, but it better be totally new.
    Of course this new devices will have to be widely accepted and become a de-facto industry standard, otherwise the goal of Universal Platform will not be achieved.
    A few words about terminal software solution. We do not like this solution because this software is complicated and the network traffic increases unacceptably. And a word about applets: it is not a bad idea, still there is place for serious improvement. And Flash ? Not bad.
    This was my idea. I hope you like it. If not, let forgotness lay above it�

    you must use twitter for promoting such pages with the community

  • How to install this update and solve USB and touchpad issues?

    I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
    Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
    The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
    The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
    This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
    Driver revision history:
    Twinhan VP704A Driver Release note
    Note:
    1.In case the system crashes while running with VP704A, Please install ULI
    USB 2.0 host driver in \ULiUSB20Driver
    2. For XP/SP1, please update with the patch in
    <http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
    3.In XP/SP1, updating driver will crash the system, while new install is ok.
    The trick to update driver in XP/SP1 is shown in the following steps,
    a. Uninstall the driver
    b. Unplug and plug the USB device
    c. Install the driver
    4. To support remote controller, please launch Agent.exe in \Agent.
    Further details can be found in \Agent\Readme.txt
    Known issues:
    1. Multi-instance is not supported
    2. Remote wakeup is not supported
    3. High CPU usage in Analog audio/video capture
    4. Bad VBI Signal using YUY2 color format
    5. AV out of sync if audio captured from wrong filter.
    (Fix:using the filter "USB Audio Device" in WDM stream capture device)
    6. Noise with analog-TV and FM Radio
    (Fix:using the filter "USB Audio Device" in WDM stream capture device)
    Driver revision history:
    2005/10/24, Version: 1.0.2.8
    Bugs fixed and new features:
    1.Crossbar not properly set.
    2005/10/21, Version: 1.0.2.7
    Bugs fixed and new features:
    1.Firmware version read from FLASH OK!
    2005/10/14, Version: 1.0.2.6
    Bugs fixed and new features:
    1.Mutil-Access driver blank part below part screen when VBI!
    2.Mutil-Access driver HCT driver verify crash fix!
    2005/10/07, Version: 1.0.2.5
    Bugs fixed and new features:
    1.Tuner Power off when S-Video,Composite.
    2005/09/30, Version: 1.0.2.4
    Bugs fixed and new features:
    1.Agent.exe updated for repeat bug!
    2.TI5150 Register for Video Format fix!
    2005/09/29, Version: 1.0.2.3
    Bugs fixed and new features:
    1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
    Note: "USB Audio device" filter provided by system does not support mutil-Access.
    2.Reset TI5150 when a new frequency is set
    2005/09/27, Version: 1.0.2.2
    Bugs fixed and new features:
    1.Fix I2C unstable access on some devices.
    2005/09/23, Version: 1.0.2.1
    Bugs fixed and new features:
    1.Analog TV becomes darker sometimes.
    2005/09/15, Version: 1.0.2.0
    Bugs fixed and new features:
    1.Fix INF for Windows 2000 installation.
    2.FM radio scan policy changed!
    2005/09/13, Version: 1.0.1.9
    Bugs fixed and new features:
    1.USB serial number string not visible with USBView, firmware update required.
    2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
    2005/09/13, Version: 1.0.1.8
    Bugs fixed and new features:
    1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
    2005/09/12, Version: 1.0.1.7
    Bugs fixed and new features:
    1.Improve channel lock status check performance
    2.Pinnacle INF Fix.
    2005/09/09, Version: 1.0.1.6
    Bugs fixed and new features:
    1.Add some audio initialization function.
    2005/08/31, Version: 1.0.1.5
    Bugs fixed and new features:
    1.NTSC & PAL mode resolution separation.
    2005/08/30, Version: 1.0.1.4
    Bugs fixed and new features:
    1.AvgTimePerFrame.
    2.Frame Drop.
    3.Pinnacle inf file HCT chkinf fail.
    2005/08/22, Version: 1.0.1.3
    Bugs fixed and new features:
    1.Add Remote controller interface in digital source filter.
    2.A new Remote controller test tool with source code in \Test_RC.
    2005/08/16, Version: 1.0.1.2
    Bugs fixed and new features:
    1.Reorg Pinnacel & Twinhan's driver & folder.
    2.VP704A_BDA_Test tool, add system code test.
    3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
    4.Firmware update
    2005/08/15, Version: 1.0.1.1
    Bugs fixed and new features:
    1.Serial number function is lost while adjusting TV audio volume
    2.RC6A CIR support
    (This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
    The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
    EEPROM should be flashed with \Firmware\M9207.bin )
    3.Serieal number, MAC address and OEM device name supported.
    Please refer to further details in \Firmware\readme.txt.
    4.Ioclt sample source code included.
    2005/08/08, Version: 1.0.0.10
    Bugs fixed and new features:
    1.Analog TV audio volume increase.
    2005/08/04, Version: 1.0.0.9
    Bugs fixed and new features:
    1.Analog TV Video mode set failure.
    2005/08/03, Version: 1.0.0.8
    Bugs fixed and new features:
    1.Off-centerf requency scan +/- 125Khz
    2.Fix duplicated program scanned in MCE.
    2005/08/02, Version: 1.0.0.7
    Bugs fixed and new features:
    1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
    2005/07/28, Version: 1.0.0.6
    Bugs fixed and new features:
    1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
    2.Improve I2C communication stability.
    3.Unify Signal strength & quality indication as THBda ioctl interface.
    4.Capture filter Lock status check.
    2005/07/28, Version: 1.0.0.5
    Bugs fixed and new features:
    1. The same signal strength & quality indications as VP7046.
    2. Debug build driver
    2005/07/21, Version: 1.0.0.4
    Bugs fixed and new features:
    1.Update INF.
    2005/07/20, Version: 1.0.0.3
    Bugs fixed and new features:
    1.Improve performance in PCM4
    2.Switching from Analog TV Mode to FM Mode failure
    2005/07/04, Version: 1.0.0.2
    Bugs fixed and new features:
    1.Production Tool FM test OK!
    And here is the readme from the other file within the update ?
    ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
    INTRODUCTION
    This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
    and Windows XP.
    CONTENTS OF THIS DOCUMENT
    1. Installation Instructions
    2. Uninstallation Instructions
    1. Installation Instructions
    (Windows 98 SE & Windows ME)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system,then restart your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    (Windows 2000)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will install and load the driver and you don't have to reboot the
    computer.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off
    your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    (Windows XP)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - Click "NEXT"
    - This program will install and load the driver and you don't have to reboot the
    computer.
    - After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
    Hub". Please select "install the software automatically (Recommended)" and then
    click "Next" button to continue install.
    - This program will install and load the driver and you don't have to reboot the
    computer.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off
    your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller", continue to install.
    - After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
    Hub". Please select "install the software automatically (Recommended)" and then
    click "Next" button to continue install.
    Notice:
    If you can't setup driver successfully. Please reboot your system and then follow
    above steps to install driver again.
    2. Uninstallation Instructions
    1. Open "Control Panel" folder.
    2. Invoke "Add\Remove Programs" icon.
    3. Choose "ULi USB2.0 Driver" item.
    4. Click on "Add/Remove" button to remove drivers.
    Change List:
    1.74
    1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
    2.support all USB2.0 Host Controller.
    1.73
    1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
    2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
    3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
    4.fix issue that wirless lan will disconect when plug-in usb device.
    1.72
    1.Fix issue that system will crash when USB HD copy large file.
    1.71
    1.improve Power management function in Win98/ME.
    1.70
    1.Improve the function of devcie detection.
    1.62
    1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
    1.61
    1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
    1.60
    1.To support power management functions when a HUB with USB device plug into
    a root HUB.
    1.57
    1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
    2.Fix issue that audio can't display smooth when USB device attach to system.
    3.Fix system can't detect USB dvice when USB device attach to system in
    suspend mode.
    4.Fix issue that when USB root HUB have full loading, USB HD sometimes
    transaction fail.
    1.56
    1. Fix issue that DVD decoder device can't display properly.
    1.55
    1. Fix OTI USB 2.0 hand drive can't be detect issue.
    2. Fix USB mouse can't use after resume from suspend.
    1.54
    1.Improve driver security.
    1.53
    1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
    2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
    1.52
    1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
    automatically fix file system errors
    2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
    v.1.51
    1. Improve USB 2.0 cardreader compatibility.
    2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
    v1.50
    1. Improve bulk transfer
    v1.48
    1. Fix USB 2.0 LAN driver installation hanging up
    2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
    3. Fix some laptops Win98SE booting hanging up
    v1.47
    1. Improve bulk transfer performance.
    2. Fix USB 2.0 bulk webcam preview failure.
    v1.46
    1. Support USB 2.0 and 1.1 Isochronous devices
    2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
    3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
    4. Improve device detection capability in Win9X/ME
    v1.45
    1. Fix system hanging up when resuming from ACPI sleep mode.
    2. Fix mouse sometimes doesn't disappear when it's unplugged.
    3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
    v1.44
    1. Support composite device
    2. Improve device detection
    v1.43
    1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
    2. Fix high-speed device detected as full-speed device
    3. Fix some USB mouses detection failure problem
    4. Fix some USB 2.0 hubs detection failure problem
    5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
    v1.42
    1. Fix PC Card ejection hanging up in Win98/ME
    2. Fix suspend/resume hanging up in Win98
    3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
    4. Fix some PC Card USB 1.1 device detection failure
    v1.41
    1. Add new feature that system can install driver before device is plugged.
    2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
    v1.40
    1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
    2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
    v1.32
    1. Fix issue that driver can't detect Microsoft driver in Windows XP
    if OS path is not c:\windows.
    2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
    v1.31
    1. Fix issue that driver can't install on Windows 2000.
    v1.30
    1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
    2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
    3. Fix issue that sometimes when you click "Scan for hardware changes".
    to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
    file can't be found.
    4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
    verison of ULi EHCI controller devices are plugged and unplugged.
    5. Support installing driver for more than one ULi EHCI controller devices existing on
    system at the same time.
    6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
    v1.20
    1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
    ULi Coporation. (ULi) web sites:
    http://www.uli.com.tw/ (Taiwan)
    CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
    i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .

    It says above 2 relevant and 1 correct answere available .............
    I'm new here so could anyone direct me to these answeres?

Maybe you are looking for